Double Spindle Pump DSP

sales presentationdouble spindle pump DSP for plasticising block goods

Characteristics§  Safe pump system for plasticizing and pumping high-viscosity media in solid block form. The geometry of the spindles in combination with the pump housing guarantees a forced guidance of the pumped media; eliminating the need for additional equipment.§  With the help of synchronized, contact free spindles the unit is dry run protected, there for free of unwanted wear.§  The bearing block with drive and spindles is disconnected through quick connect closures from the pump housing. For cleaning purposes the rotary unit can be easily pulled back over slide rails.§  Quick connect closures and a heavy hinge allow to open the pressure nozzle to clean the pressure side of the DSP.§  Through the geometry of the spindles and the matched housing a good drainage is guaranteed and the lost media is significantly reduced.§  An additional hopper with table to unpack blocks can be adapted.§  Pressure up to 10 bar are available without an additional booster pump.§  All connect closures are secured with contactless safety switches.

Benchmark data DSP§  Max. pressure (dependent on speed and viscosity): approximately 10 bar§  Flow rate (dependent on speed and viscosity): approx.: 1 to 10 t/h§  Central temperature: from -18°C to ambient temperature For temperature lower than 0°C a optional desintegrator is available§  Block material: butter, marzipan, rework, cheese, margarine, palm fat, chocolate, fondant, mincemeat, fruit preparation and others

DSP Doppel spindle pump with hopper and cover inclusive safety switches.

DSP Double spindle pump DSP opened with the help of slide rails => Quick and easy cleaning

DSP-tests Butter Marzipan Chocolate mass

Displacement spindles spindle profile 1/3 spindle profile 1/1

Thank you for your attention

Contact:KNOLL Maschinenbau GmbHSchwarzachstrasse 20D-88348 Bad SaulgauPhone +49 (0) 7581 / 20 08-353Fax +49 (0) 7581 / 20 08-230info.itworks@knoll-mb.dewww.blog.mx-pumps.com

Double Spindle Pump DSP

by KNOLL Maschinenbau on May 08, 2011

Accessibility

Categories

Tags

Upload Details

Usage Rights

2 Embeds 861

Statistics

Double Spindle Pump DSP — Presentation Transcript

http://blog.mx-pumps.com	857
http://translate.googleusercontent.com	4