Exam HP0-D03 study material
Made available by
CertsKing.com
Free HP0-D03 Exam Preparation
Questions
Exam HP0-D03: Implementing HP Insight Dynamics - VSE Solutions

Question: 1
Which setting should be used to enable the SAN boot option in a Virtual Connect Enterprise Manager server
profile?
A. BfSAN
B. FC-boot
C. Primary
D. Use BIOS
Answer: C
Question: 2
Your customer has a mixed environment consisting of Microsoft Windows running on HP ProLiant
servers and HP-UX 11i on Integrity servers. The customer wants to manage the entire environment from
a single Central Management Server (CMS). Which solution would you recommend to this customer?
A. Windows CMS with HP SIM NFS plug-in
B. HP-UX 11i CMS with HP SIM CIFS plug-in
C. Windows CMS with extensions for HP SIM on Windows
D. HP-UX 11i CMS with extensions for HP SIM on Windows
Answer: C
Question: 3
A customer existing environment includes Brocade Fabric switches. What is the most relevant fact to
determine about the existing BrocadeA customer? existing environment includes Brocade Fabric
switches. What is the most relevant fact to determine about the existing Brocade switches?
A. If they support LAN bridging
B. If they support LUN masking
C. If they support port virtualization
D. If they support Fiber Channel over IP
Answer: C
Question: 4
You arrive at a customer site to install HP Insight Dynamics - VSE. When reviewing the installation
questionnaire, you find a discrepancy. HP Rapid Deployment Pack (RDP) is at version
3.7 and not version 3.8 as previously recorded. How does this impact the installation?
A. An upgrade must be performed to RDP 4.2 before installation.
B. An upgrade must be performed to RDP 5.0 before installation.
C. Installation is not affected because RDP 3.6 is the minimum required version.
D. There is no impact because RDP 3.7 can be upgraded by the installation media.
Answer: D
Question: 5
Which protocol is used to log in to the HP Systems Insight Manager command line interface
securely?
A. NFS
B. SSH
C. rlogin
D. telnet
Answer: B

Question: 6
Which configuration is unsupported?
A. RDP and SQL 2005 Express loaded on the CMS
B. RDP not loaded on the CMS, SQL loaded on a third server
C. RDP loaded on the CMS, SQL 2005 Express accessed remotely
D. SQL remotely accessed by CMS, RDP loaded on a third server accessing SQL on a fourth server
Answer: C
Question: 7
Which component is necessary to enable a customer to implement logical servers on physical blades?
A. an InfiniBand double-wide interconnect switch
B. Cisco Ethernet and Cisco Fibre Channel interconnect modules
C. Ethernet and Fibre Channel pass-through interconnect modules
D. Virtual Connect Ethernet and Virtual Connect Fibre Channel modules
Answer: D
Question: 8
Click the Exhibit button. Which combination shown in the exhibit is not supported by HP Virtual Connect
Enterprise Manager?
A. VC Domain with factory WWN addresses and a VC Domain Group with factory WWN
addresses
B. VC Domain with user-defined WWN addresses and a VC Domain Group with Factory WWN
addresses
C. VC Domain with user-defined WWN addresses and a VC Domain Group with user-defined WWN
addresses
D. VC Domain with HP-predefined WWN addresses and a VC Domain Group with HP-predefined WWN
addresses
Answer: B

For complete Exam HP0-D03 Training kits and Self-Paced Study Material
Visit:
http://www.certsking.com/HP0-D03.html
http://www.certsking.com/