Mikrotik® MPLS/VPN
Lab Part-1
By Kaveh Khosravi
What will be covered
• Introduction
• How to set up the Lab
• Configuration
• Connectivity Check
• Introduction
In this lab you are going to learn how to use Mikrotik’s powerful operating system , Router OS® , in
order ...
• How to set up the Lab
 The DELL Labtop is used for runnig vmware workstation to simulate the MPLS network
with virtual ...
• How to set up the Lab
The Lab used in this tutorials consists of the following :
 Hardware
1.
2.
3.
4.

DELL® N-4030 La...
• How to set up the Lab
The Lab used in this tutorials consists of the following :
 Hardware (DELL® N-4030 Labtop )
Processor

Intel Core i3-370M 2.4GHz Processor with Intel
Hyper-Threading Technology (3MB Cache)

Memory
Hard Drive

2GB D...
• How to set up the Lab
The Lab used in this tutorials consists of the following :
 Hardware (Juniper® Networks SRX 210HM...
• How to set up the Lab
The Lab used in this tutorials consists of the following :
 Hardware (Juniper® Networks Secure Se...
• How to set up the Lab
The Lab used in this tutorials consists of the following :
 Hardware (Pluggable® USB 2.0 to Gigab...
• How to set up the Lab
Hardware (Pluggable® USB 2.0 to Gigabit Ethernet Converter )

•
•

•
•
•

USB 2.0 male A to RJ45 f...
• How to set up the Lab
The Lab used in this tutorials consists of the following :
 Software
1.
2.
3.

Vmware® Workstatio...
• How to set up the Lab
The Lab used in this tutorials consists of the following :
 Software (Windows® Server 2003 )
Ther...
• How to set up the Lab
The Lab used in this tutorials consists of the following :
 Software ( Vmware® Workstation 9 )
In...
Everything is clear !
Juniper SRX & SSG-5 Devices
USB-> Ethernet &
Spoke-1 labeled
cable
The link between
CE-1 & Spoke-1 via
USB->Ethernet
Spoke-2

Spoke-1

HUB
OC-3 155.52Mbps

OC-3 155.52Mbps
OC-3 155.52Mbps

T1 1.544Mbps
T3- 6.312Mbps

T1 1.544Mbps
NEXT :
Physical lab video 1
Mikrotik® MPLS/VPN Lab Part 1
Mikrotik® MPLS/VPN Lab Part 1
Mikrotik® MPLS/VPN Lab Part 1
Mikrotik® MPLS/VPN Lab Part 1
Mikrotik® MPLS/VPN Lab Part 1
Mikrotik® MPLS/VPN Lab Part 1
Mikrotik® MPLS/VPN Lab Part 1
Mikrotik® MPLS/VPN Lab Part 1
Mikrotik® MPLS/VPN Lab Part 1
Mikrotik® MPLS/VPN Lab Part 1
Upcoming SlideShare
Loading in...5
×

Mikrotik® MPLS/VPN Lab Part 1

3,957

Published on

This guide describes the building blocks of MPLS/VPN lab scenario using Mikrotik RouterOS and Juniper Networks Secure Service Gateway and SRX series .

Published in: Technology
0 Comments
5 Likes
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
3,957
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
370
Comments
0
Likes
5
Embeds 0
No embeds

No notes for slide
  • * : http://wiki.mikrotik.com/wiki/Manual:MPLS/Overview** : http://wiki.mikrotik.com/wiki/Manual:MPLS
  • * : http://wiki.mikrotik.com/wiki/Manual:MPLS/Overview** : http://wiki.mikrotik.com/wiki/Manual:MPLS
  • http://www.villman.com/Product-Detail/Dell_Insp_4030_W7B
  • http://www.villman.com/Product-Detail/Dell_Insp_4030_W7B
  • http://www.juniper.net/as/en/products-services/security/srx-series/srx210/
  • http://www.juniper.net/us/en/products-services/security/ssg-series/ssg5/#specifications
  • http://plugable.com/products/usb2-e1000
  • http://plugable.com/products/usb2-e1000
  • Mikrotik® MPLS/VPN Lab Part 1

    1. 1. Mikrotik® MPLS/VPN Lab Part-1 By Kaveh Khosravi
    2. 2. What will be covered • Introduction • How to set up the Lab • Configuration • Connectivity Check
    3. 3. • Introduction In this lab you are going to learn how to use Mikrotik’s powerful operating system , Router OS® , in order to implement MPLS/VPN functionality , although it lacks Important features like fast reroute * . All of the main examples and configurations for MPLS/VPN are given from Mikrotik’s documentations ** website .
    4. 4. • How to set up the Lab  The DELL Labtop is used for runnig vmware workstation to simulate the MPLS network with virtual machines running as Mikrotik Router-OS as Provider (P) and Provider Edge (PE) routers,Windows Server 2003 as Customer Edge ( CE) routers . Juniper SRX 210HM , First SSG-5 and Second SSG-5 act as HUB site , Spoke-Branch-1 and Spoke-Branch-2 respectively . Labtop’s FastEthernet and Pluggable USB to Gigabit Ethernets are used for connecting CE-1 to HUB site , CE-2 to spoke-2 and CE-3 to spoke-3 so we can make bridge between real world and Virtual world .  Lets take a look at physical lab components
    5. 5. • How to set up the Lab The Lab used in this tutorials consists of the following :  Hardware 1. 2. 3. 4. DELL® N-4030 Labtop x1 Juniper® Networks SRX 210HM x1 Juniper® Networks Secure Services Gateway ( SSG5-SB) x2 Pluggable® USB 2.0 to Gigabit Ethernet Converter x2
    6. 6. • How to set up the Lab The Lab used in this tutorials consists of the following :  Hardware (DELL® N-4030 Labtop )
    7. 7. Processor Intel Core i3-370M 2.4GHz Processor with Intel Hyper-Threading Technology (3MB Cache) Memory Hard Drive 2GB DDR3-1333 320GB 5400RPM Chipset Mobile Intel® 5 Series Express Chipset HM57 Graphics Intel HD Graphics Display 14.0" High Definition (720p) 1366 x 768 WLED Display with TrueLifeTM Optical Drive Network DVD+/-RW Optical Drive Integrated 10/100 Ethernet Communication Dell Wireless 1501 802.11 b/g/n; Dell Wireless 365 Bluetooth Audio Integrated Stereo Sound Camera Integrated .3 Megapixel Web Camera
    8. 8. • How to set up the Lab The Lab used in this tutorials consists of the following :  Hardware (Juniper® Networks SRX 210HM ) SRX210 Services Gateway with 2 GbE+ 6 Fast Ethernet ports, 1 Mini-PIM slot, 1 ExpressCard slot and high memory (1 GB RAM, 1 GB Flash)
    9. 9. • How to set up the Lab The Lab used in this tutorials consists of the following :  Hardware (Juniper® Networks Secure Services Gateway ) Juniper Networks Secure Services Gateway 5 with RS-232 Aux backup, Wireless 802.11a/b/g, 128 MB Memory
    10. 10. • How to set up the Lab The Lab used in this tutorials consists of the following :  Hardware (Pluggable® USB 2.0 to Gigabit Ethernet Converter )
    11. 11. • How to set up the Lab Hardware (Pluggable® USB 2.0 to Gigabit Ethernet Converter ) • • • • • USB 2.0 male A to RJ45 female adapter supporting gigabit ethernet at USB 2.0 speeds Drivers for Windows 7, Vista, XP, and Mac (requires download, see OS X 10.7 instructions), and Linux (built into kernel 3.2 and above, earlier kernels require download and compile). Supports 10/100/1000 with auto-sensing (IEEE 802.3, 802.3u, and 802.3ab) Supports auto MDIX (straight and cross cable auto-detection) ASIX AX88178 Controller – Jumbo packets up to 9KB (Windows only), along with suspend mode and remote wakeup
    12. 12. • How to set up the Lab The Lab used in this tutorials consists of the following :  Software 1. 2. 3. Vmware® Workstation 9 ( evaluation ) Windows® Server 2003 ( evaluation ) as Virtual machine Mikrotik® Router OS ( evaluation) as Vitual machine
    13. 13. • How to set up the Lab The Lab used in this tutorials consists of the following :  Software (Windows® Server 2003 ) There is no need for no one in the networking field , with a few years of experience , to say : what is W2K3 ? Just like a previous slide , W2K3 is going to be installed in Vmware .
    14. 14. • How to set up the Lab The Lab used in this tutorials consists of the following :  Software ( Vmware® Workstation 9 ) In the Implementation section you can see how to warm it up !
    15. 15. Everything is clear !
    16. 16. Juniper SRX & SSG-5 Devices
    17. 17. USB-> Ethernet & Spoke-1 labeled cable
    18. 18. The link between CE-1 & Spoke-1 via USB->Ethernet Spoke-2 Spoke-1 HUB
    19. 19. OC-3 155.52Mbps OC-3 155.52Mbps OC-3 155.52Mbps T1 1.544Mbps T3- 6.312Mbps T1 1.544Mbps
    20. 20. NEXT : Physical lab video 1
    1. A particular slide catching your eye?

      Clipping is a handy way to collect important slides you want to go back to later.

    ×