tMarieCurieFlorenceNightingaleEleanorRooseveltExemplars of the Fabulous Five Dimensionsof Centered LeadershipKelley Conrad...
Why these Women?It started with an interest in FlorenceNightingale. We were researching her recentlypublished “Collected W...
Marie Curie1867-1934• Coined word “radioactivity”• Discovered Radium• Shared Nobel Prize in Physics with herhusband – 1898...
Florence Nightingale1820-1910• In 1851, trained as a nurse at the Institute of ProtestantDeaconnesses at Kaiserswerth• In ...
Eleanor Roosevelt1884-1962• Called, “the most influential woman of our times.”• “Used her influence as first lady and priv...
Centered Leadership ModelMcKinsey & CompanyHow remarkable womenlead: The breakthroughmodel for work and life.Barsch, J., &...
Marie Curie Florence Nightingale Eleanor RooseveltPrecondition: IntelligenceAt 4 demonstrated shecould read – astonishingm...
Marie Curie Florence Nightingale Eleanor RooseveltPrecondition: Tolerance for ChangeIn early life sheexperienced manytrage...
Marie Curie Florence Nightingale Eleanor RooseveltPrecondition: Desire to LeadTaught in floatinguniversity, later as agove...
Marie Curie Florence Nightingale Eleanor RooseveltPrecondition: Communication SkillsLearned French – wrotepassionate lette...
MANAGING ENERGY: Minimizing DepletionMarie Curie Florence Nightingale Eleanor RooseveltSo concentrated on studiesdid not c...
MANAGING ENERGY: RestorationMarie Curie Florence Nightingale Eleanor RooseveltPassional love ofatmosphere of laboratory(MC...
MANAGING ENERGY: FlowMarie Curie Florence Nightingale Eleanor RooseveltMoved from Poland toFrance, addressed academicchall...
POSITIVE FRAMING: Self AwarenessMarie Curie Florence Nightingale Eleanor Roosevelt“I does not exist for me.”MC p. 403; at ...
POSITIVE FRAMING: Learned OptimismMarie Curie Florence Nightingale Eleanor RooseveltIn Spartan existence as astudent did n...
POSITIVE FRAMING: Moving OnMarie Curie Florence Nightingale Eleanor RooseveltAfter being prohibited toproceed with engagem...
CONNECTING: Network DesignMarie Curie Florence Nightingale Eleanor RooseveltAfter WWI had no radiumaccepted offer of Mrs.M...
CONNECTING: SponsorshipMarie Curie Florence Nightingale Eleanor RooseveltAfter award of Nobel prize(70,000 gold francs), s...
CONNECTING: ReciprocityMarie Curie Florence Nightingale Eleanor RooseveltDonated entire 200,000Franks of second Nobelprize...
CONNECTING: InclusivenessMarie Curie Florence Nightingale Eleanor RooseveltWillingly supported othersand their efforts in ...
ENGAGING: VoiceMarie Curie Florence Nightingale Eleanor RooseveltDescribes happy, absorbeddays in shed extractingRadium “I...
ENGAGING: OwnershipMarie Curie Florence Nightingale Eleanor RooseveltCould have patentedRadium but insteaddivulged the sec...
ENGAGING: Risk TakingMarie Curie Florence Nightingale Eleanor RooseveltAbandoned study of uraniumand undertakes to examine...
ENGAGING: AdaptabilityMarie Curie Florence Nightingale Eleanor RooseveltOriginally planned on beinga HS teacher, earned th...
MEANING: HappinessMarie Curie Florence Nightingale Eleanor RooseveltFirst love was in the familywhere she was thegoverness...
MEANING: Signature StrengthsMarie Curie Florence Nightingale Eleanor RooseveltGift of absorption(MC26-7)-Dedicated –focuse...
MEANING: PurposeMarie Curie Florence Nightingale Eleanor RooseveltOriginal plan was to become aHS teacher in Poland –becam...
IMPACT: PresenceMarie Curie Florence Nightingale Eleanor RooseveltToo shy to make friends withFrench, takes refuge amongco...
IMPACT: ResilienceMarie Curie Florence Nightingale Eleanor RooseveltPersisted in spite of acritical French press –against ...
IMPACT: BelongingMarie Curie Florence Nightingale Eleanor RooseveltStrongly identified withher nativePoland, always intend...
Centered LeadershipOur analysis of the lives of MC, FN, and ER found goodevidence in their lived experiences for the usefu...
Contact InformationConrad, K. A., Metros, A., & Shambaugh, B. (2013, June). Nightingale, Curie, and Roosevelt as exemplars...
Upcoming SlideShare
Loading in...5
×

Marie, florence, & eleanor ila wlag

395

Published on

Florence Nightingale, Marie Curie, and Eleanor Roosevelt as exmplars of the Centered Leadership Model. Paper presented at the ILAWLAG June 2013

0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
395
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
0
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • SmartArt graphic with pictures on red background(Intermediate)To reproduce the SmartArt graphic on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click Picture. In the Picture pane, double-click Title Picture Lineup (fifth row) to insert the graphic into the slide. Click each of the four picture placeholders in the SmartArt graphic, select a picture, and then click Insert.Select the graphic. Under SmartArt Tools, on the Format tab, in the Size group, enter 5.92” in the Height box and 8.75” in the Width box.Also under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all of the text boxes above the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 26 pt. from the FontSize list. Click Font Color and select White, Background 1.Press and hold CTRL, and then select all of the text boxes above the pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Diagonal Corner Rectangle.Also under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane, click Gradient fill, and then do the following:In the Type list, select Linear.In the Angle box, enter 0.3°.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 136, Green: 50, and Blue: 48.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 77, Green: 28, and Blue: 27Also in the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click No line.Also in the Format Shape dialog box, click Shadow in the left pane, in the Shadow pane, click the button next to Presets, and then under Outer, click Offset Diagonal Bottom Left (first row).Press and hold CTRL, and then select the three text boxes below the pictures. On the Home tab, in the Font group, select Gill Sans MT from the Font list,select 24 in the Font Size box, and then click Font Color and select White, Background 1.Also on the Home tab, in the Paragraph group, click Align Text Left. Press and hold CTRL, and then select the three vertical lines in the SmartArt graphic. Under SmartArt Tools, on the Format tab, in the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, in the Line Color pane, click Gradient line, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 46%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.In the Transparency box, enter 0%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).In the Transparency box, enter 100%. Press and hold CTRL, and then select all three pictures. Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and then under Rectangles, click Round Single Corner Rectangle.Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects, point to Shadow, and then under Inner, click Inside Diagonal Top Right.Also under PictureTools, on the Format tab, in the Picture Styles group, click Picture Border, and then click No Outline.To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click Format Background. In the FormatBackground dialog box, click Gradient fill, and then do the following:In the Type list, click Radial.In the Direction list, click From Center.Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 153, Green: 57, and Blue: 55.Select the next stop in the slider, and then do the following: In the Position box, enter 50%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 114, Green: 42, and Blue: 40.Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 40, Green: 15, and Blue: 14.
  • Marie, florence, & eleanor ila wlag

    1. 1. tMarieCurieFlorenceNightingaleEleanorRooseveltExemplars of the Fabulous Five Dimensionsof Centered LeadershipKelley Conrad, UOPX; Anastasia Metros, UOPX, Barbara Shambaugh, Consultant
    2. 2. Why these Women?It started with an interest in FlorenceNightingale. We were researching her recentlypublished “Collected Works” when someonesaid she was one of only three women on a listof the 100 most influential People of the last1000 years. We never found that list. But wefound several others and noted very few womenon them. We found Florence Nightingale, MarieCurie, and Eleanor Roosevelt on several lists.
    3. 3. Marie Curie1867-1934• Coined word “radioactivity”• Discovered Radium• Shared Nobel Prize in Physics with herhusband – 1898• Earned Doctorate in 1903 – still considered oneof the greatest scientific contributions made by adoctoral student• Took over Radium Lab after husband’s death in1906• Managed construction of Sorbonne’s Institute ofRadium• Awarded second Nobel Prize in Chemistry in 1911(Only woman with 2)• During WWII invented portable X-ray machinesand trained 150 French housewives to operatethem• First woman in 650 years to be admitted tofaculty of Sorbonne• First woman elected to Académie de Médicine• Member of the International Committee onIntellectual Cooperation for the League ofNations• Recipient of 125 awards and Honorary titles“I am among those who think thatscience has great beauty. A scientist inhis laboratory is not only a technician:He is also a child placed before naturalphenomena which impress him like afairy tale.”
    4. 4. Florence Nightingale1820-1910• In 1851, trained as a nurse at the Institute of ProtestantDeaconnesses at Kaiserswerth• In 1853, accepted position as superintendent of theInstitution for the Care of Sick Gentlewomen inLondon.• Single handedly raised the standard of hospital andnursing care in Great Britain.• In 1854, agreed to supervise a contingent of nursesbeing sent to Scutari to assist doctors at the BarracksHospital.• With astonishing speed and skill began to improve theconditions and aid the sick and wounded. Eventually12,000 patients were treated.• “Two figures emerged from the Crimea as heroic, thesoldier and the nurse and in each case thetransformation was due to Miss Nightingale.”• Shunned publicity• Spent 16 years after the war working on medical andpublic health reform.• Completely changed the profession of nursing.• A genius for organization and innovation.• First woman to receive the British Order of Merit“Miss Nightingale did inspireawe, not because one felt afraid ofher per se, but because the veryessence of truth seem to emanatefrom her, and because of herperfect fearlessness in telling it.”Wm. Richmond
    5. 5. Eleanor Roosevelt1884-1962• Called, “the most influential woman of our times.”• “Used her influence as first lady and private citizen toadvance the cause of human rights and in doingso, became the conscience of the country and the mostimportant public woman of the twentieth century.”Deborah Felder• Orphaned by 10 and raised by maternal grandmother• Attended Allenswood boarding school in England andwas tutored by Marie Souvestre• 1902 made her debut in society while working atsettlement houses and visiting factories as a memberof National Consumer’s League• 1905 married FDR, they had 6 children• 1918 discovered FDR affair and defined a new anddifferent partnership with FDR• In 1933 held the first press conference of a first lady.These continued through her term.• Wrote a syndicated newspaper column, hosted a radioshow, and wrote a number of books.• 1945 Became U.S. ambassador to UN and was key indrafting the Universal Declaration of Human Rights• 1961 Chaired JFK’s Commission on the Status ofWomen“Her liberation was not anuncovenanted gift. Sheattained it only through aterrifying exertion of self-discipline….” A. Schlesinger
    6. 6. Centered Leadership ModelMcKinsey & CompanyHow remarkable womenlead: The breakthroughmodel for work and life.Barsch, J., & Cranston, S.TheFabulousFive
    7. 7. Marie Curie Florence Nightingale Eleanor RooseveltPrecondition: IntelligenceAt 4 demonstrated shecould read – astonishingmemory of Polishholidays (MC 10-11) - by8 was avid reader –twoyears younger thatclassmates in privateschool (MC 18) -valedictorian of her HSclass – worked as aprivate tutor after HSLearned French andItalian in boardingschool in London - Waspoised and wandered inEuropean cities on herown when in boardingschoolTaught bygovernesses, Tutored byfather in classical andmodernliterature, mathematics,and philosophy
    8. 8. Marie Curie Florence Nightingale Eleanor RooseveltPrecondition: Tolerance for ChangeIn early life sheexperienced manytragedies – mother diesof TB –Father demoted –She had to learn Polishon the sly – elder sisterdied of typhusSought out change – firstfrom expectations ofwomen in her socialclass,Adapted to adominating mother-in-law, widelydifferent roles ofmother, wife ofgovernor and wife ofpresident
    9. 9. Marie Curie Florence Nightingale Eleanor RooseveltPrecondition: Desire to LeadTaught in floatinguniversity, later as agoverness – In Szczukisecretly taught peasantchildren to read and write(MC-67-69) – Acceptedleadership but did not seekit. After Pierre’s death tookover management of theRadium institute.Great interest & Concern forpoor and their suffering –Visited the sick on herfather’s estate. Quicklyaccepted the opportunityand call to lead a group ofnurses to travel to Scutari towork in the British militaryhospitalAt Allenswood, the girlscould not resist…thequalities of leadership shedisplayed in unaffectedways (p. 26) Expandedphilanthropic activities intoleadership of organizationsbeginning with leadershipof the WWI Red Crosscanteen. That experiencegenerated a new opinionof herself
    10. 10. Marie Curie Florence Nightingale Eleanor RooseveltPrecondition: Communication SkillsLearned French – wrotepassionate letters – keptmeticulous financial records– Coined the word“radioactivity” to describethe emissions from uranium.– Resented intrusions ofpress and curiosity seekers –Her notebooks from the 19thCentury are still tooradioactive to be handled.Early in life began keeping ajournal, had a special Biblewith alternate blank pagesfor notes. Used her family’ssocial connections todevelop support for herwork. Avoided the limelightbut used letters to persuadekey officials of her cause.During the 1920 campaignER was often the onlywoman among thetraveling politicians andnewspaper men. As FirstLady traveled and talkedextensively to supportFDR. In response to FDR’scampaign managerbecame a political activist.Had a daily newspapercolumn, wrote books, hada monthly article in WHC
    11. 11. MANAGING ENERGY: Minimizing DepletionMarie Curie Florence Nightingale Eleanor RooseveltSo concentrated on studiesdid not cook or eat andsuffered from malnutrition– at Sorbonne for threeyears lives life ofsolitude, devoted to studyalone (MC105) – Her secretuniverse of implacablerigor, dominated by passionfor science, excludeslove, marriage (MC119)Unhappy with life in hersocial station, foundhappiness throughdevelopment of nursingas a profession.Withstood criticism andresistance of doctors andmilitary in Scutari. Waitedtill they recognized hernurses and she couldhelp. Later when famousavoided publicity.Careful strategizer –social adeptness acrosseconomic groups andsocial classes.Redefined her marriagewith FDR after his affairwith her social secretary.After FDR’selection, commented, “And now – I shall have towork out my ownsalvation” (LS, p. 86).
    12. 12. MANAGING ENERGY: RestorationMarie Curie Florence Nightingale Eleanor RooseveltPassional love ofatmosphere of laboratory(MC111). Single minded inpursuit of radioactivitysource and then radium.Withstood criticism andresistance of doctors andmilitary officers in Scutari.Felt called by God to be anurse. Driven to ease thesuffering of soldiers.ER used Lorena Hickok assomeone to whom shecould bare hersoul, which becameeffective therapy for hersense of self-worth overthe decade. “I nevertalked toanyone, perhaps that iswhy it all ate into mysoul, and I look upon somany emotions moreseriously than theyounger generation.” (LS.
    13. 13. MANAGING ENERGY: FlowMarie Curie Florence Nightingale Eleanor RooseveltMoved from Poland toFrance, addressed academicchallenges at the Sorbonne– During building of PhysicsLaboratory climbs builders’scaffoldings, draw plans,argued with architect(MC285-286) On outbreakof war had one thought, tosave France (MC290)installed 200 radiologicalrooms for wounded,learned to drive RenaultEagerly acceptedassignment to lead 38nurse delegation toScutari, Turkey – Did notresist doctor and militaryunwillingness, simplyorganized the nurses andthe hospitaldemonstrating their valueand was ready to assistwhen asked.Took advantage ofopportunities presentedher as a leader in manyorganizations – quitseveral organizations tomake important points –advocate for blacks andyouth worldwide. As firstlady began holding pressconferences for womenreporters. The womenbecame devoted followersand protective guardiansas well (LS. p. 88).
    14. 14. POSITIVE FRAMING: Self AwarenessMarie Curie Florence Nightingale Eleanor Roosevelt“I does not exist for me.”MC p. 403; at Sorbonne“discovers enormous holesin her ‘culture’” (MC 95)Explains living alone inSpartan apartment – as agirl had not learned tokeep house and didn’twant to (MC106-7)Decided she wanted to be anurse had to convince herfather and family. Unceasingconcern for suffering ofsoldiers – “Angel of theCrimea” – Continued herwork in Balaclava even aftercontracting Crimean fever -Often sat in the sectionsreserved for Blacks atmeetings, When DAR closedConstitution Hall tocontralto MarianAnderson, invited her tosing at the White House –Held first press conferencesas a First Lady, did not invitethe male press –Entertained gridironwidows on the night thepress gave a stag party forthe president.
    15. 15. POSITIVE FRAMING: Learned OptimismMarie Curie Florence Nightingale Eleanor RooseveltIn Spartan existence as astudent did not admit shecould be cold or hungry(MC108-109) Notdiscouraged by lack ofcooperation by school andFrench authorities orattacks from the Frenchpress, inadequateequipment dismal facilitiesUnceasing concern forsuffering of soldiers –Persisted in efforts eventhough resisted by doctorsand military until theyrecognized her nurses couldbe of help. “Angel of theCrimea” – Continued herwork in Balaclava even aftercontracting Crimean fever .After becoming first lady, “Ihad no way of knowingthen that I would havemore mail of my own than Icould handle withoutspending hours and hoursfar into the night on it.”(TIK, p. 76)Built relationshipssupportive of women andequal rights in the UN laterserved on the HumanRights commission UNcommittee.
    16. 16. POSITIVE FRAMING: Moving OnMarie Curie Florence Nightingale Eleanor RooseveltAfter being prohibited toproceed with engagementto Casimir Z, met with himto burn the bridges eventhough he was hesitatingand fearsome (MC 87).After Pierre’s death Marietook over his teachingposition and laboratory inthe Sorbonne. She was thefirst woman to teach at theUniversity of ParisFrom Scutari moved toBalaclava and institutedsanitary reforms there.After return to Englandwrote a major paper on themedical conditions inmilitary hospitals whichthen was applied in India.After FDR’s affair, sheremained married to himbut became a separatepartner - After FDRsdeath she remainedactive and accepted majorleadership roles in theTruman, Eisenhower, andKennedy administrations
    17. 17. CONNECTING: Network DesignMarie Curie Florence Nightingale Eleanor RooseveltAfter WWI had no radiumaccepted offer of Mrs.Meloney and women’sclubs to raise money thenmade US Trip to accept the“Standard” gram of Radium– Was the first and onlywoman in several majorscientific organizations.Although she resisted theexpectations of her class inEngland to pursuenursing, Responded toHerbert’s request to headnursing group for Scutari.When she needed toconnect with influentialfriends was willing to do so.Appealed to Queen Victoriato secure supplies for thehospital in Scutari.Initially connect by herfamily’s prominent role inNYC. Joined League ofWomen Voters. As firstlady built relationshipssupportive of women andequal rights – womenonly news conferencesand stag party. In the UNwon followers for hersupport of minorities &children.
    18. 18. CONNECTING: SponsorshipMarie Curie Florence Nightingale Eleanor RooseveltAfter award of Nobel prize(70,000 gold francs), spendmuch of money to subsidizeneedy friends andstruggling students andloans to her sisters andPierre’s brother – but failedto buy a new hat (MC 211-212) Visited 300-400 Frenchand Belgian hospitals duringthe war (MC 298)Sidney Herbert, British Sec.of War who asked her to goto Scutari (1853 or 54) –When military refusedsuggestions Florence wentdirectly to Queen Victoriaand in 1857 convened aroyal commission toimplement health reformsin army – First woman toreceive British Order ofMeritDuring the 1920presidential campaign ERmade peace with LouisHowe, the ex-reporterdetermined to make FDRpresident some day (LS, p.61). Accepted a position onthe legislative committee ofthe NY League of Womenvoters (LS, p. 63). ERlearned to addressproblems and critiquelegislative remedies, andwas soon serving on policymaking committees
    19. 19. CONNECTING: ReciprocityMarie Curie Florence Nightingale Eleanor RooseveltDonated entire 200,000Franks of second Nobelprize to French Governmentfor WWI. Patent on radiumwould have enabled her togive hospitals andlaboratories to France, butshe said humanity needsdreamers (MC336)Spent 45,000 pounds raisedby the public to found StThomas Hospital nursestraining school (1860)Although ER understatedthe impact she had, sherecognized the leverageone gained from easyaccess to the seat ofpower, and she clearedthe path for colleagueswho had issues to discussand candidates topromote (LS, p.78).
    20. 20. CONNECTING: InclusivenessMarie Curie Florence Nightingale Eleanor RooseveltWillingly supported othersand their efforts in scholarlyactivities and in research.Fame and publicity broughtthem misery and torment(MC213) Marie’s waragainst fame an instinctwith her, and curiousglances fastened on herbring on dizziness andphysical discomfort(MC219)Avoided public recognition– secluded herself inLondon after return fromScutari – Governmentsconsulted her – US forhospitals during Civil War –British War Office routinelysent her all sanitary reports.Wrote major report onsanitation that became theguide for the British Army inIndia and then everywhere.Readily related to othersregardless of theirbackgrounds. DuringWWII visited troops in thefield and Pacific theater.At first was discouragedfrom doing this by militaryleaders but while the tourwas still underway wasrecognized by Adm.Nimitz as a major moralebooster
    21. 21. ENGAGING: VoiceMarie Curie Florence Nightingale Eleanor RooseveltDescribes happy, absorbeddays in shed extractingRadium “I wonder what Itwill be like, what It will looklike?” (MC 171) From 1899to 1904 Marie and Pierrepublished thirty-twoscientific communications(MC194) From then onethey receive letters signedby greatest names inscience (MC194)After royal commission in1857 Florence composed an800 page report in 1858 onBritish Army – This led torequests to adviseimproving sanitaryconditions for the army inIndiaTook lessons to improve herspeaking voice and developskill presenting her ideas andvalues – made sure FDRheard the voices for reformby inviting people withdifferent politicalpersuasions to dinner andseating them next to him.
    22. 22. ENGAGING: OwnershipMarie Curie Florence Nightingale Eleanor RooseveltCould have patentedRadium but insteaddivulged the secrets toother scientists – (MC 202-205) Makes no materialprofit form discovery (1gram of radium then worth$150,000) (MC200)WonNobel prize in Chemistryand a second one in Physics.Refused Legion of Honortwice for war service(MC307Once she decided shewanted to be anurse, worked steadilytoward becoming one.When she met resistance toher ideas to improveconditions in the BritishArmy, she took her casedirectly to the queen.Denials aside, politics didexcite her, and ER was notindifferent to FDR’s politicalfate. By 1928 she hadcompleted herapprenticeship and was afull-fledged master of thetrade (LS, p. 79).
    23. 23. ENGAGING: Risk TakingMarie Curie Florence Nightingale Eleanor RooseveltAbandoned study of uraniumand undertakes to examine allknown chemical bodies eitherin pure state or in compounds(MC 155-156) – Ignored initialsymptoms of radiationsickness (it was not known)New element exists only inher and Pierre’s imaginationbut she tells Bronya: “ thenew element is there and I’vegot to find it. We are sure!”(MC157)Compiled statistics onCrimean Hospital conditions– 1856 sent proposal toMinistry of war to revamparmy medial servicesDuring the 1928 presidentialcampaign ER accepted aninvitation to codirect theWomen’s Division of thenational office…The pace atheadquarters wasstaggering, “I worked until4:30 a.m. on account of theradio speech this morning,”…The work wasdiscouraging.
    24. 24. ENGAGING: AdaptabilityMarie Curie Florence Nightingale Eleanor RooseveltOriginally planned on beinga HS teacher, earned threemaster’s degrees and adoctorate – assumedmanagement of the physicslab and the physicsdepartment after the deathof her husband.Worked withmilitary, civilian, andgovernmental bodiesIndividualperformer, manager, advocateAble to relate to people fromall walks of life. Wrotebooks, edited amagazine, wrote a dailynewspaper column, heldpress conferences, visitedmany places as a way ofgathering information forFDR.In all the twelve years Icannot remember that myoffice made any mistakesthat caused either myhusband or me
    25. 25. MEANING: HappinessMarie Curie Florence Nightingale Eleanor RooseveltFirst love was in the familywhere she was thegoverness. “Now that I havelost hope of everybecoming anybody, all myambition has beentransferred to Bronya andyou” (MC75) Marie longedto join her sister in Paris buthad to work to support hersister’s medical studies –Husband killed in 1906.Caused Marie to becomedespondentUnhappy with life in hersocial station, Foundhappiness throughdevelopment of nursing as aprofession.However, always felt shehad not done enough whenin Scutari.Was described a homely anddoir as a young woman –was in love with FDR andthey married over protestsfrom both their families –After FDR’s affair withEleanor’s secretary becamean independent partner –but remained married andan advocate for the rights ofthe poor and disadvantaged
    26. 26. MEANING: Signature StrengthsMarie Curie Florence Nightingale Eleanor RooseveltGift of absorption(MC26-7)-Dedicated –focused – hard working– Precise and Persistent(long hours of exactingeffort required to extractradium from pitchblendIndependence, persistence, organization (HarleySt, London nursing homesuperintendent), takeCharge Administrator inScutari – Hard worker(20 hrs/day in Scutari)Willing and vocaladvocate for many causes– Skilled negotiator andspeaker –able topersuade FDR to addressmany issues he mightotherwise have ignored –Strong voice for a newmore equal role forwomen
    27. 27. MEANING: PurposeMarie Curie Florence Nightingale Eleanor RooseveltOriginal plan was to become aHS teacher in Poland –became interested inradioactivity in 1895 andbegan serious study of it in1897 –Longed to discover thesource of radioactivity.Thinking she has made anerror in experiment, shestarts measurement overagain ten, twenty times, isforced to yield to evidenceand comes to only onepossible explanationAt 17 diaried direct call fromGod to enter his service –Moved by suffering she sawin European hospitals – in1850 impressed by Sisters ofSt Vincent de Paul nursingorder – 1851 three monthswith nursing deaconesses inKaiserswerth, Germany – twoweeks with nursing order inParis – 1853 decided to makea career in nursingDuring the 1924 Democraticconvention, ER held hearingsto determine the resolutionsof her advisory group. “Hersubcommittee called forvigorous enforcement ofProhibition and for ratificationof the Child LaborAmendment…*and+ demandedincreased appropriations tothe Children’s and Women’sbureaus of the Department ofLabor as well as expandedservices under the Shepard-Towner Act. Landmark Legis.
    28. 28. IMPACT: PresenceMarie Curie Florence Nightingale Eleanor RooseveltToo shy to make friends withFrench, takes refuge amongcopatriots of Latin Quarter(MC101) On rare occasionswhen entertains, she is ameticulous hostess (MC231) atbanquet in herhonor, Warsaw, leaves place tokiss Mlle Sikorska, childhoodteacher now very old (MC283-284) Charming to wounded(MC304) Never speaks ofhardships and dangers of warservice or of physical damageto her from X-rays and radium.Wrote many letters anddocuments. 6 official reportsand 12 books. Her collectedpapers fill 13 volumesIn 1932, ER was sent by FDR tothe second bonus march ofunemployed WWI veterans ERvisited the camp and walkedamong the veterans. Thecasual manner in which shedescribed the camp defusedthe situation. ER afterwardused the impact of personalappearance to affect the toneon subsequent publicity andon public policy. Initiated pressconferences for femalereporters.
    29. 29. IMPACT: ResilienceMarie Curie Florence Nightingale Eleanor RooseveltPersisted in spite of acritical French press –against personalcharacter that led her tobrink of suicide andmade her gravely ill(MC279) continued herstudies and won secondNobel prize based on herown efforts even thoughrejected by the FrenchAcademy of Sciences.Persisted in work evenwhen sick and housebound.After the first presidentialelection, “As I saw it, thismeant the end of anypersonal life of myown….The turmoil in myheart and mind wasrather great that night….”(TIR, p.. 74-75)
    30. 30. IMPACT: BelongingMarie Curie Florence Nightingale Eleanor RooseveltStrongly identified withher nativePoland, always intendedto return – supportedher sister’s studies –after the death of herhusband fell in love witha married man but hadto abandon therelationship because ofthe criticism in the pressInspirational model forwomen and nurses.Defined and developed anew professional role fornurses. Became loved inEngland and the “ladywith the lamp” butshunned the publicity. During the mid-1920’sER moved comfortably inboth sufferage camps(LS, p. 72). “…*I+ tried toremember to inviteTIR, to the White Houseold friends and otherpeople to whom Ithought it would mean agreat deal to come atleast once into thathistoric mansion”
    31. 31. Centered LeadershipOur analysis of the lives of MC, FN, and ER found goodevidence in their lived experiences for the usefulness ofthe Fabulous Five Dimensions of Centered Leadership.We believe women with a desire to lead would do well toexamine these three women and their models of how tosucceed through the expression of their own values andwisdom. The Fabulous Five Dimensions are:1. Meaning2. Managing Energy3. Positive Framing4. Connecting5. Engaging
    32. 32. Contact InformationConrad, K. A., Metros, A., & Shambaugh, B. (2013, June). Nightingale, Curie, and Roosevelt as exemplarsof the fabulous five dimensions of Centered Leadership. Paper presented at the InternationalLeadership Association Women and Leadership Affinity Group Conference, Asilomar, PacificGrove, CA.For a copy of the paper itself, please email your request to Kelley.• Kelley A. Conrad, School of Advanced Studies, University of PhoenixKelley.Conrad@Phoenix.edu402 Genesee St. Apt. 201Delafield, WI 53018262-443-3662• Anastasia Metros, School of Advanced Studies, University of Phoenixametros@gmail.com608-577-5773• Barbara Shambaugh, Nursing Systems ConsultantBarbara.Shambaugh@Phoenix.edu77 Pond Avenue #1501Brookline, MA 02445617-974-3084

    ×