Microbeads For Pvc

374 views
250 views

Published on

These masterbatches are far more better over conventional masterbatches.

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
374
On SlideShare
0
From Embeds
0
Number of Embeds
37
Actions
Shares
0
Downloads
7
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Microbeads For Pvc

  1. 1. Micro Colour Master Batchfor PVC & PE’s
  2. 2. Product SpecificationGenerally powdered pigments have aggregates and agglomerates which can not be furtherbroken down into primary particles by milling process. This problem is mainly observed in Black,Phthalocyanine Blue, Phthalocyanine Green, Red, Yellow etc. pigments. It contains aggregatesand agglomerates which creates specs (poor dispersion due to undispersed particles) in blownfilms, thin injection moulded parts etc.In M.G.Polyblends Micro PVC master batch, the pigment is dispersed to the finest possibleparticle size by using specialIty dispersant and additives under strict process conditions. ThisMicro PVC master batch gives excellent dispersion in final applications. APPEARANCE Dust free micro granules. CARRIER RESIN PVC compatible low molecular weight polymer BENEFITS vConsistent colour strength v and uniform dispersionExcellent v in useEconomy v pigments, these master batches are nonUnlike dry Polluting & easy to use. RECOMMENDED 0.1 to 2.0 % depending on the final shade required. DOSAGE METHOD OF USE It can be used directly in place of dry pigments in high speed mixer during dry blend preparation or it can be used directly through on line dosing unit attached to extruder or injection moulding machine. APPLICATIONS Extruded and moulded PVC products like pipes and Fittings, cables and wires, sheets, Profiles, flooring etc. PACKAGING Material is packed in 10 Kg fiber drum or 25 kg HDPE Woven Sacks. The information given below in this document is only a recommendation, believed to be reliable and is given in good faith but without warranty. Users are advised to test the product to ascertain the suitability for the intended use
  3. 3. PRODUCT CARRIER RECOMMENDEDPRODUCT RESIN DOSE LEVEL APPLICATIONS CODEThe information given below in this document is only a recommendation, believed to be reliable and is given in good faith but without warranty. Users are advised to test the product to ascertain the suitability for the intended use
  4. 4. Usage Method (Case Study)A trial of PVC Black Color Microbeads has been taken on a Twin Screw Extrusionmachine for manufacturing PVC Pipes.We found excellent results as discussed below: PRODUCT NAME : PVC BLACK MICROBEADS PRODUCT CODE : (BK-1033) CONSUMPTION RATIO : 0.76% DOSING UNIT : Color fed 380 MACHINES : Twin Screw Extruder REFERENCE STANDARD : IEC 61386 PROCESS TEMPERATURES : BARREL TEMP 0C : 180-185-185-180-170 SCREW OIL TEMP 0C : 160 TOOL ZONES 0C : 185 – 173 – 170 – 190 - 190 PROCESS REPORT : Found Good surface finishQUALITY REPORT:SL. NOTEST REQUIREMENT OBSERVATION RESULTSl.No TestSL Requirement Observation Result1.Colour & Shall be smooth surface Found smooth surface finish Passed Surface finish finish2.Impact test Shall show no sign of Found no sign of cracks or Passed (-5 Deg C for cracks disintegration 2 Hrs)3.Bend test a. Shall show no sign of Found no sign of cracks Passed (-5deg C for cracks 2 Hrs) Found gauge passed through b. Shall pass bendingsample Passed gauge through the sample4. Collapse test a. Shall show no sign ofFound no sign of cracks Passed (60degc for cracks 24 Hrs) b. Shall pass bendingFound gauge passed through Passed gauge through the sample sample5. Compression Max: 10%9.1% Passed test The information given below in this document is only a recommendation, believed to be reliable and is given in good faith but without warranty. Users are advised to test the product to ascertain the suitability for the intended use
  5. 5. Product’s Technical Specification CERTIFICATE OF ANALYSISPRODUCT NAME : MICRO COLOUR FOR PVCCOLOURS : BLACK, WHITE & COLOURSAVAILABLECARRIER RESIN : PVC COMPATIBLE WAX GENERAL PROPERTIES S.NO. PROPERTIES VALUES 1. BULK DENSITY 0.5-0.85 gm/ml 2. MOISTURE CONTENT <0.02% 3. LIGHT FASTNESS EXCELLENT 4. HEAT STABILITY STABLE UPTO 3000C 5. PIGMENT CONTENT 40-60%(*) This temperature is at our lab conditions. Its varies on actual processing machinery and conditions at the client’s end.The information given below in this document is only a recommendation, believed to be reliable and is given in good faith but without warranty. Users are advised to test the product to ascertain the suitability for the intended use
  6. 6. M.G. POLYBLENDS A-11, Lawrence Road, Industrial Area, Delhi-110035 (INDIA) Tel.:91-11-27187157, 47053768, Tel/Fax: 91-11-27195691E-mail: info@mgpolyblends.com, website: www.mg-polyblends.com

×