Connect your Arduino to the cloud in 5 minutes, And make your IoT project succeed.

2. Quick start

3. Setup hardware
● Arduino UNO
● ESP8266 wifi module

4. Download the framework
● https://github.com/jumpwire-io/Arduino-ESP8266/archive/master.zip
● Unzip and rename it to Arduino-ESP8266

5. Open Arduino-ESP8266.ino

6. Copy & paste sample code
● https://gist.github.com/028a705e7bc4be59f76b

7. Get your secret token
● https://console.jumpwire.io/

8. Set token, wifi ssid, wifi password

9. When uploading the code, temporarily
disconnect PIN 0 (Arduino's RX pin) to
avoid error.
Upload the code to Arduino

10. Cut off power and reconnect
● This means resetting Arduino and ESP8266 at the same time
● It will be connected to the jumpwire.io server within 15 seconds.

11. ● Throw “1” from the console, LED will turn ON.
● Throw “0” from the console, LED will turn OFF.
Test it

12. Blinking?

13. Congrats!

14. ● http://docs.jumpwire.io/
○ How it works
○ How to Throw a message from Arduino
○ Troubleshooting
For more info
Thanks