Shure ksm32 embossed single diaphragm microphone, champagne
Shure KSM32 Embossed Single-DiaphragmMicrophone, Champagne Price : Check Price Average Customer Rating 4.7 out of 5 Product Feature q Cardioid polar pattern. q Utilizes an embossed, ultra-thin, high-compliance Mylar diaphragm q Low frequency filter virtually eliminates background noise q Shure-quality construction and pop protection. q 15dB switches pad for very high input SPL sources. q Read moreProduct DescriptionAn embossed single-diaphragm, side-address, cardioid condenser microphone for highly critical studiorecording and live sound productions. The Shure KSM32 offers an extended frequency response for an open,natural sounding reproduction of the original sound source. Read moreProduct DescriptionDesigned for studio use but rugged enough for live applications, the Shure KSM32 side-address condensermicrophone with cardioid polar pattern features a permanently-biased 3/4-inch diaphragm, extremely lowself-noise, and an extended frequency response specially tailored for vocal tracking and instrument recording.
The Shure KSM32 microphone in champagne.Key FeaturesSwitchable low-frequency filter provides greater flexibility to reduce background noise or to counteractproximity effect. Frequency response.
Polar pattern.Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across thefull frequency range.Embossed, high-compliance diaphragm provides extended low-frequency response.Ultra-thin, gold-layered, low-mass, Mylar diaphragm for excellent transient response15 dB attenuation switch for handling extremely high sound pressure levels (SPL)Integrated three-stage pop protection grille reduces "pop" and other breath noiseInternal shock mount reduces transmission of handling noisePerformance CharacteristicsExtended frequency responseVery low self-noiseExceptional low-frequency reproductionHigh output levelHigh input SPL capabilityNo cross-over distortionExtremely uniform polar responseSuperior common mode rejection and suppression of radio frequency interferenceApplicationsSome typical applications for the KSM32 are listed below. Microphone use, however, is a matter of personaltaste. The KSM32 may be used for a variety of applications other than those listed.Voice -- solo, background, voice-over, broadcastingAcoustic instruments -- such as piano, guitar, drums, percussion, stringsWind instruments -- brass and woodwindLow frequency instruments -- such as double bass, electric bass, kick drumOverhead miking -- drums or percussionEnsembles -- choral or orchestralRoom ambiance pick-up -- guitar amplifier or drumsSpecificationsType: Permanently Biased CondenserFrequency Response: 20 to 20,000 HzDirectional Polar Pattern: Cardioid/OmnidirectionalOutput Impedance: 150 ohms (actual)Attenuation Switch: 0 or -15 dB attenuationLow Frequency Response Switch: Flat; 6 db/octave below 115 Hz; -18 dB/octave below 80 HzPhantom Power: 48 Vdc +/- 4 Vdc (IEC26815/DIN 45 596), positive pins 2 and 3Current Drain: 4.65 mA typical at 48 VdcCommon Mode Rejection: ≥50 dB, 20 Hz to 20 kHzSensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL): -36 dBV/Pa (16 mV)
Selfnoise (typical, equivalent SPL; A-weighted, IEC 651): 13 dBPolarity: Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3Weight: 17.3 ouncesRead moreYou May Also LikeNady MPF-6 6-Inch Clamp On Microphone Pop FilterOn Stage Stands MS7701 Tripod Boom Microphone StandShure Popper Stopper Pop Filter with Metal Gooseneck and Heavy Duty Microphone Stand ClampGLS Audio 25 foot Mic Cable Patch Cords - XLR Male to XLR Female Black Microphone Cables - 25 Balanced MicSnake Cord - SingleOn Stage DS7200B Adjustable Desk Microphone Stand, Black