Basic Use ETERNABOND ™
™
Eternabond RoofSeal/OneStep Tape is used to seal roof joints (seams) and tears,
flashings, copings, skylights, gutters, etc. Perfect for repairing and restoring roofs on
mobile homes and RVs. Very flexible, RoofSeal/OneStep seals to itself so it can be cut
and folded around an object, as if wrapping a present.
RoofSeal/ ™
™
Composition
Eternabond RoofSeal/OneStep utilizes EternaBond’s advanced MicroSealant™
OneStep
For use on virtually all roofs,
Technology, a 100% solids formulation of synthetic resins, thermoplastics and RoofSeal/OneStep Tape
non-curing rubber (non butyl) with a built in primer, bonded to a tough UV stable incorporates EternaBond’s
ETERNABONDRoofSeal/OneStep
backing. Designed not to harden under even the most rigorous conditions. Sag
ETERNABONDRoofSeal/OneStep
™
advanced MicroSealant™
temp > 200ºF. MicroSealant™ is protected (while in a roll) by a tough, easily removed Technology and features a UV
siliconized polymer release liner, which prevents contamination prior to its use. stable backing. It is available
All materials are prefabricated to provide uniform thickness. in White, Black, or Gray.
RoofSeal/OneStep is literally a
Technical Data
one-step (with the exception of
Standard roll size 2", 4", 6", 8", 12", 24", 36" X 50’
cleaning the surface), permanent
Standard case quantity 100 sq. ft. per case repair system for roofs and roof
Available widths Up to 48"
accessories. RoofSeal/OneStep
Colors Black, White, Gray
creates a waterproof, moisture and air
Total thickness RoofSeal: 35 mils (+/- 2 mils)
tight barrier with no additional
RoofSeal PLUS: 65 mils (+/- 2 mils) sealing required. RoofSeal/OneStep
Adhesion 20lbs+/in width
remains flexible to temperatures as
Low temp flexibility Exellent -70°F making it virtually
low as -70°F making it virtually
Application temp >150°F to -25°F with
impossible to thermally shock the
optional primer roof causing a leak.
Temperature range -70°F - >200°F
Pliability No cracks in membrane RoofSeal/OneStep features
Water vapor test (ASTME 96B) .005 grms/100" sq./24hrs/100°F EternaBond’s self-sealing advanced
Permanence .001 perms maximum
™
Technology, a sealant
MicroSealant™ Technology, a sealant
Elongation >700% +/- 100 so advanced it permanently bonds to
Tensile break PSI 4500 PSI +/- 500 PSI a wide range of surfaces including
Shelf life Up to 5 years difficult roof materials such as EPDM,
TPO, most PVC, CSPE/Hypalon, CPE ,,
CPE
Surface Preparation SBS, APP modifies, asphalt BURs, coal
Surface must be clean and dry; free of loose rust and scale, dust, talc, and dirt. tar BURs, all metal roofs, tiles,
Oil, grease, and other contaminants should be removed with a suitable solvent/cleaner. aluminum, Galvanized steel,
shingle, aluminum, Galvanized steel,
ETERNABONDRoofSeal/OneStep
ETERNABONDRoofSeal/OneStep
Use of EternaPrime reduces clean up. For older plastic roofs, score surface with sand gypsum board, wood, polyethylene,
cloth and wipe away dust. propylene, polystyrene, fiberglass,
concrete, masonry, OSB, etc.
brick, concrete, masonry, OSB, etc.
Application
Install Eternabond RoofSeal/OneStep over the repair area, removing the plastic release
liner gradually to prevent contamination of the adhesive prior to application. Rub or ™
roll with pressure with hand or steel roller to activate bonding process. This material ETERNABOND ™
may be applied to clean dry surfaces from 150ºF+ to -20ºF. Treat surface with
EternaPrime for installations from 40°F to -20°F.
RoofSeal ™
™
PLUS
RoofSeal PLUS, almost twice as thick as
regular RoofSeal with 30 additional mils of
EternaBond MicroSealant! RoofSeal PLUS
is specifically designed for granulated
surfaces that require a deeper
roofs or surfaces that require a deeper
seal.
ETERNABOND, Inc.
Hawthorn Woods, IL, USA
Telephone: 888-336-2663
Fax: 847-540-7413
www.eternabond.com