Learning Objectives                                  • LINE command.2. Getting Started with AutoCAD                       ...
 Drawing Lines in AutoCAD                                    Ribbon:          Home > Draw > Line2. Getting Started with A...
2. Getting Started with AutoCAD                                  Drawing lines using the LINE command
The LINE command has the following three options:2. Getting Started with AutoCAD                                  Continue...
 Coordinate Systems                                    1. Absolute coordinates2. Getting Started with AutoCAD            ...
Absolute Coordinates                                  Command: LINE2. Getting Started with AutoCAD                        ...
Example 12. Getting Started with AutoCAD                                          Drawing a figure using the absolute coor...
Relative Coordinate System                                  Relative Rectangular Coordinates2. Getting Started with AutoCA...
2. Getting Started with AutoCAD                                  Example 2    Profile for Example 2
Relative Polar Coordinates                                  Command: LINE2. Getting Started with AutoCAD                  ...
2. Getting Started with AutoCAD                                  Example 3   Drawing for Example 3
Direct Distance Entry                                  Command: LINE2. Getting Started with AutoCAD                       ...
2. Getting Started with AutoCAD                                  Example 4    Drawing for Example 4
 Erasing Objects                                    Ribbon:          Home > Modify > Erase2. Getting Started with AutoCAD...
 Canceling and Undoing a Command                                   Object Selection Methods2. Getting Started with AutoC...
 Drawing a Circle                                     Command:         CIRCLE or C2. Getting Started with AutoCAD        ...
2. Getting Started with AutoCAD                                   Drawing a circle by          Drawing a circle by specify...
2. Getting Started with AutoCAD                                  Drawing a circle tangent    Drawing a circle tangent     ...
2. Getting Started with AutoCAD                                  Drawing a circle tangent to                              ...
 Basic Display Commands                                    Zooming Drawings2. Getting Started with AutoCAD               ...
 Setting Units Type and Precision                                    Application Menu:   Drawing utilities > Units       ...
Specifying the Format                                  Specifying the Angle Format2. Getting Started with AutoCAD         ...
Setting the Direction for Angle Measurement2. Getting Started with AutoCAD                                  North, South, ...
2. Getting Started with AutoCAD                                  Example 5  Drawing for Example 5
 Setting Limits of a Drawing                                    Command:       LIMITS2. Getting Started with AutoCAD     ...
Example 62. Getting Started with AutoCAD                                                       Drawing for Example 6      ...
 Introduction to Plotting Drawings                                     Ribbon:             Output > Plot > Plot2. Getting...
 Modifying AutoCAD Settings using the                                   Options dialog box2. Getting Started with AutoCAD...
Upcoming SlideShare
Loading in...5
×

Autocad2011 2

2,027

Published on

Autocad 2 hluti.

Published in: Education, Technology
0 Comments
2 Likes
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
2,027
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
166
Comments
0
Likes
2
Embeds 0
No embeds

No notes for slide

Autocad2011 2

  1. 1. Learning Objectives • LINE command.2. Getting Started with AutoCAD • Coordinate systems. • ERASE tool. • Object selection methods: Window and Crossing. • CIRCLE command. • ZOOM and PAN commands. • UNITS command. • Limits of a given drawing. • Plot drawings. • Options dialog box.
  2. 2.  Drawing Lines in AutoCAD Ribbon: Home > Draw > Line2. Getting Started with AutoCAD Toolbar: Draw > Line Menu Bar: Draw > Line Tool Palettes: Draw > Line Command: LINE or L The Line tool in the Draw panel Invoking the Tool Palettes Invoking the LINE command from the Palettes menu from the Draw toolbar
  3. 3. 2. Getting Started with AutoCAD Drawing lines using the LINE command
  4. 4. The LINE command has the following three options:2. Getting Started with AutoCAD Continue Close Undo
  5. 5.  Coordinate Systems 1. Absolute coordinates2. Getting Started with AutoCAD 2. Relative coordinates a. Relative rectangular coordinates b. Relative polar coordinates 3. Direct distance entry
  6. 6. Absolute Coordinates Command: LINE2. Getting Started with AutoCAD _line Specify first point: 1,1 (X = 1 and Y = 1.) Specify next point or [Undo]: 4,1 (X = 4 and Y = 1.) Specify next point or [Undo]: 4,3 Specify next point or [Close /Undo]: 1,3 Specify next point or [Close/Undo]: C Lines created using the absolute coordinates
  7. 7. Example 12. Getting Started with AutoCAD Drawing a figure using the absolute coordinates
  8. 8. Relative Coordinate System Relative Rectangular Coordinates2. Getting Started with AutoCAD Command: LINE _line Specify first point: 1,1 (Start point) Specify next point or [Undo]: @4,0 (Second point DX = 4, DY = 0.) Specify next point or [Undo]: @0,3 (Third point DX = 0, DY = 3.) Specify next point or [Close/Undo]: @-4,0 (Fourth point DX = -4, DY = 0.) Specify next point or [Close/Undo]: @0,-3 (Start point DX = 0, DY = -3.) Drawing lines using the relative Specify next point or [Close/Undo]: rectangular coordinates
  9. 9. 2. Getting Started with AutoCAD Example 2 Profile for Example 2
  10. 10. Relative Polar Coordinates Command: LINE2. Getting Started with AutoCAD Specify first point: 1,1 Specify next point or [Undo]: @5<30 Drawing a line using relative polar coordinates
  11. 11. 2. Getting Started with AutoCAD Example 3 Drawing for Example 3
  12. 12. Direct Distance Entry Command: LINE2. Getting Started with AutoCAD _line Specify first point: Start point. Specify next point or [Undo]: Position the cursor and then enter distance. Specify next point or [Undo]: Position the cursor and then enter distance. Drawing lines using the Direct Distance Entry method
  13. 13. 2. Getting Started with AutoCAD Example 4 Drawing for Example 4
  14. 14.  Erasing Objects Ribbon: Home > Modify > Erase2. Getting Started with AutoCAD Toolbar: Modify > Erase Menu Bar: Modify > Erase Command: ERASE or E Tool Palettes: Modify > Erase The Erase tool in the Modify Panel The Erase tool in Selecting the object by positioning the the Modify pick box at the top of the object toolbar
  15. 15.  Canceling and Undoing a Command  Object Selection Methods2. Getting Started with AutoCAD The Window Option The Crossing Option Selecting objects using the Window Selecting objects using the Window option Crossing option
  16. 16.  Drawing a Circle Command: CIRCLE or C2. Getting Started with AutoCAD Toolbar: Draw > Circle Menu Bar: Draw > Circle Tool Palettes: Draw > Circle Ribbon: Home > Draw > Circle drop-down > Center , Radius Tools in the Circle drop-down The options of the CIRCLE command Center and Radius Center and Diameter Two-Point Three-Point Tangent, Tangent, Radius Tangent, Tangent, Tangent
  17. 17. 2. Getting Started with AutoCAD Drawing a circle by Drawing a circle by specifying specifying the center and the center and the diameter the radius A circle drawn by using the A circle drawn by using 2-Point option the 3-point option
  18. 18. 2. Getting Started with AutoCAD Drawing a circle tangent Drawing a circle tangent to two objects to two objects Drawing a circle tangent Drawing a circle tangent to to two objects two objects
  19. 19. 2. Getting Started with AutoCAD Drawing a circle tangent to three objects
  20. 20.  Basic Display Commands Zooming Drawings2. Getting Started with AutoCAD The Zoom tools in the Navigator Bar
  21. 21.  Setting Units Type and Precision Application Menu: Drawing utilities > Units Command: UNITS2. Getting Started with AutoCAD The Drawing Units dialog box
  22. 22. Specifying the Format Specifying the Angle Format2. Getting Started with AutoCAD Specifying angles in Surveyor’s Measuring angles Units
  23. 23. Setting the Direction for Angle Measurement2. Getting Started with AutoCAD North, South, East, and West The Direction Control dialog box directions Specifying Units for the Drawing or Block to be Inserted Sample Output Specifying Units for Lighting
  24. 24. 2. Getting Started with AutoCAD Example 5 Drawing for Example 5
  25. 25.  Setting Limits of a Drawing Command: LIMITS2. Getting Started with AutoCAD Setting limits Setting limits in a drawing Limits for Architectural Drawings
  26. 26. Example 62. Getting Started with AutoCAD Drawing for Example 6 Limits for Metric Drawings
  27. 27.  Introduction to Plotting Drawings Ribbon: Output > Plot > Plot2. Getting Started with AutoCAD Toolbar: Quick Access > Plot Application Menu: Print > Plot Command: PLOT or PRINT Basic Plotting The Plot dialog box
  28. 28.  Modifying AutoCAD Settings using the Options dialog box2. Getting Started with AutoCAD Application Menu: Options Command: OPTIONS • Files • Display • Open and Save • Plot and Publish • System • User Preferences • Drafting • 3D Modeling • Selection • Profiles The Options dialog box
  1. A particular slide catching your eye?

    Clipping is a handy way to collect important slides you want to go back to later.

×