INDIAN DENTAL ACADEMY
Leader in continuing dental education
www.indiandentalacademy.com

Vertical Jaw
Relations

www.india...
According to GPT
 Vertical

jaw relation are those
established by the amount of separation
of maxillae & mandible under s...
 The

physiologic rest position of the
mandible as related to the maxillae and
the relations of the mandible to the
maxil...
Thus Vertical Jaw Relations are
classified as
(1) The Vertical Relation of Rest
position
(2) The Vertical Relation of Occl...
According to GPT :
 “Physiologic

rest position” is
The postural relation of the mandible to the
maxillae when the patien...
 When

observations of physiologic rest
position are being made, the patient’s
head should be upright and
unsupported.

w...
 The

force applied by the jaw opening
muscles is added to the force of
gravity, when the head is upright.
 In a reclini...
Rest vertical dimension = Occlusal vertical
dimension + Interocclusal distance.
 During the construction of complete
dent...
 The

second thing that establishes the
vertical relation of the mandible to the
maxillae is the occlusal stop provided
b...
Vertical dimension of occlusion:
 It

is defined as the distance measured
between two points when occluding
members are i...
“Why is interocclusal space
necessary???”
 The

health of the periodontal
membranes that support the natural
teeth and th...
 For

this reason, an interocclusal rest
space between the maxillary and
mandibular teeth is essential for the
opening an...
 The

interocclusal rest space is the
difference between the rest vertical
relation and the occlusal vertical
relation an...
 Once

the vertical relation of rest
position has been determined, it is easy
to adjust the vertical relation of the
occl...
Methods To Record
Vertical JawRelation

www.indiandentalacademy.com
The methods for determining the
vertical Maxillomandibular relations
can be grouped roughly into two
categories
 (1)

Mec...
MECHANICAL METHOD
Ridge relations

A) Distance of incisive papilla from
mandibular incisors.
The incisive papilla is used ...
 The

distance of the incisive papilla
from the incisal edge of the mandibular
incisors is about 4 mm in the natural
dent...
 So

the average vertical overlap of the
opposing central incisor is about 2 mm.

 The

disadvantage of this method is t...
www.indiandentalacademy.com
B)Parallelism of the ridges
Paralleling of the ridges, plus a 5
degree opening in the posterior region
as suggested by Sea...
www.indiandentalacademy.com
 This

theory if used alone, is not
reliable, because many patients present
such marked resorption that the use of
this r...
2) Measurement of former dentures:
Measurements are made between the
borders of the maxillary and
mandibular dentures by m...
If

the teeth click or if the closest
speaking space is obliterated
during speech, the Vertical
Dimension should be reduc...
Measurement of former dentures
using Boley’s gauge

www.indiandentalacademy.com
www.indiandentalacademy.com
3)Pre-extraction records :
It is frequently possible to see the
patient before he or she becomes
edentulous. In such cases...
A)Profile radiograph:
 The exposure of a full lateral
radiograph is made with the teeth in
occlusion,
and
after extractio...
Radiographs:

www.indiandentalacademy.com
  Disadvantages
 Additional 

Patient 

exposure 

to 

radiation.
 Additional time (Time consuming)
 Conventional  rad...
B) Profile photographs
 Profile 

photographs  are  made  and 
enlarged to life size. 
 Measurements  of  anatomic  land...
 The  photographs  should  be  made  with 

the teeth in max occlusion
 This was explained by W.H. Wright in 
1939  cert...
 These  measurements  can  be  compared 

when  the  records  are  made  and  again 
when the artificial teeth are tried ...
        .
C) Profile Silhouettes:
 An accurate reproduction of the profile 

in silhouette can be cut out in 
cardboard o...
    

i)Lead wire adaptation: 
 Lead wires may be adapted carefully to 
pre extraction profiles, and this contour 
is tra...
 When the dentist estimates the vertical 

relation  using  the  trial  plates,  the 
cardboard  cutout  is  placed  agai...
 ii)Swenson’s method(1959): 
...  

 Swenson  suggested  that  acrylic  resin  face 

masks  made  before  the  extractio...
Swenson’s method (1959)

www.indiandentalacademy.com
Drawbacks of this method 
 It is time consuming 
 Requires lot of skill and experience 
with the use of facial impressio...
 D)Facial Measurements : 
 Various 

devices  for  Matching  facial 
measurements have been used in many 
different forms...
    

www.indiandentalacademy.com
 i) The Dakometer

www.indiandentalacademy.com
  ii) Willi’s gauge: 

                        This  instrument  is  used  for 
recording  vertical  height  before 
extra...
www.indiandentalacademy.com
 It  is  locked  in  position  by  the  screw. 

The  distance  on  the  scale  is  recorded 
on the patient’s chart.  
...
www.indiandentalacademy.com
G) Articulated casts: 
 These  are  of  practical  value  in  the 
assessment  of  the  vertical  relation. 
Measurements...
 The casts also assist in the selection of 

size, shape and position of the teeth. 

www.indiandentalacademy.com
www.indiandentalacademy.com
4)POST EXTRACTION METHODS
 a) Niswonger’s method: 
 Niswonger in 1934 suggested a method 

for  determining  the  vertica...
www.indiandentalacademy.com
 The 

patient  is  told  to  swallow  and 
relax. 
 The  distance  between  the  marks  are 
recorded. 
 Subsequently,...
 This  method  has  the  disadvantage  that 

the  marks  moves  with  the  skin  and 
sometimes  it  is  difficult  to  ...
b)Willi’s method: 
Willis  believed  that  the  distance  from 
the  pupil  of  the  eye  to  the  rima  oris 
should  be ...
c)Concept of equal-thirds
  Some observers suggested that the face 
can  be  divided  into  equal  thirds,  the 
forehead,...
www.indiandentalacademy.com
d)Silverman’s  closest  speaking  space 

which measures the vertical relation in 
the  phonetic  method  must  not  be 
c...
The  closest  speaking  space  measures 
the vertical relation when the mandible 
and  muscles  involved  are  in 
physiol...
 The  occlusion  rims  are  placed  in  the 

mouth and the height is adjusted until a 
min of 2 mm of space exists when ...
e) Boos method (Power point)
Boos (1940) found that there is a point
of maximum biting power. He states
that the patient r...
 The

bimeter is attached to an
accurately adapted mandibular record
base.
 A metal plate is attached to the vault of
an...
 The

vertical relation is adjusted by
turning the cap.
 The gauge indicating the pounds of
pressure generated during cl...
 When

the maximum power point has
been determined the set is locked.
Plaster registrations are made and the
cast is tran...
6) Lytle’s method (Neuromuscular
perception)


The patients tactile sense is used as a
guide to determine the correct

oc...
www.indiandentalacademy.com
 The

screw is adjusted first so it is
obviously too long .Then in
progressive steps the screw is adjusted
until the pati...
www.indiandentalacademy.com
www.indiandentalacademy.com
This method is not very effective
with senile patients or those who
have impaired neuromuscular
coordination

www.indiande...
G)Electromyography
Rest position of the mandible can be
determined
by
means
of
electromyography which would record
the min...
www.indiandentalacademy.com
Physiologic Methods:
1)

Physiologic rest position:
Registration of the jaws in physiologic
rest position gives an indicat...
Then the lips are carefully parted to see
how much space is present between the
occlusion rims.
The patients must allow th...
The interarch space and rest position can be
measured by indelible dots or adhesive
tapes on the face.
If the difference i...
2) Phonetics:
Speech

is used as an aid in
determining the vertical relation.
Phonetics
tests
of
vertical
dimension cons...
The

patient is asked to repeat the
letter ‘M’ until he is aware of the
contacting of the lips.
The patient is asked to ...
If

the anterior teeth touch when
these sounds are made, the vertical
relation of occlusion is probably
too great.
 Like...
The

position of the tongue and the
relation of the teeth is also an imp
factor.

www.indiandentalacademy.com
3)Facial expression:
The experienced dentist learns the
advantage of recognizing the relaxed
facial expression when the ja...
However,

it must realized that the
relative anteroposterior positions
of the teeth are at least equally
involved in the ...
 The

contour of the lips depends on
their intrinsic structure and support
behind them.
 Therefore the dentist must init...
 The

skin around the eyes and over the
chin will be relaxed.
 Relaxation around the nares reflects
unobstructed breathi...
Based on harmony of face

www.indiandentalacademy.com
4)Swallowing threshold:
 The

position of the mandible at the
beginning of the swallowing act has
been used as a guide to...
The theory behind the method
 is

that when a person swallows, the
teeth come together with very light
contact at the beg...
 The

technique involves building a cone
of soft wax on the lower denture base
so that it contacts the upper occlusion
ri...
 The

flow of saliva is stimulated and the
repeated action of swallowing will
gradually reduce the height of wax
cone to ...
The

length of time this action is
carried out and the relative softness
of the wax cone will affect the
results
It is d...
Maxillary occlusion rim should
be checked for
 Labial

fullness
 Height of occlusal rim
 Anterior plane
 Anteroposteri...
Labial fullness
 The

lip is normally supported by the
alveolar process and teeth which,at this
stage,are represented by ...


The upper lip may appear too full
because the lower lip at this stage is
unsupported.

www.indiandentalacademy.com
The height of occlusal rim
 The

incisal edges of the maxillary incisors
will be at the same position as the occlusal
sur...
The anterior plane
 The

upper anterior teeth are set with
their incisal edges in the same position
as the occlusal surfa...
www.indiandentalacademy.com
Anterior posterior plane
 This

plane indicates the position of the
occlusal surfaces of the posterior and is
obtained in...
Midline
Few human faces are symmetrical therefore
there is no hard and fast rule for
determining midline.
Following aids h...
 Imaginary

line from center of brows to
center of skin
 Immediately below center of philtrum
 At the bisection of the ...
Lip line
 Lip

line is a straight line just in contact
with the inferior border of the upper lip
when relaxed
 High lip ...
 High

lip line indicates the amount of
denture which may be seen in normal
conditions and thus assists in
determining th...
Mandibular occlusion rim
 Is

trimmed so that when it occludes
evenly with the maxillary rim as a
guide at correct vertic...
EFFECTS OF INCREASED
VERTICAL RELATION
1)

Discomfort to the patient

2) Trauma: by the jamming effect of the
teeth coming...
3)Loss of freeway space: which may
be due to
(a) muscular fatigue of any one or
group of muscles of mastication.
(b) Traum...
4)Clicking teeth – The tongue which has
become accustomed to the presence of
teeth in certain fixed positions and
during s...
5)Appearance – The face has an
elongated appearance since, at rest the
lips are parted and closing them
together will prod...
EFFECTS OF DECREASED VERTICAL
RELATION:

1)Inefficiency – which is due to the fact
that the pressure with which it is
poss...
2) Cheek biting – In come cases
where there is a loss of muscular
tone, as well as reduced vertical
height, the flabby che...
3)Appearance: The general effect of
overclosure on facial expression is of
increased age.
There is close
approximation of ...
4) Angular cheilitis : A reduced
vertical relation results in a crease
at the corners of the mouth beyond
the vermillion b...
5) Pain in the TMJ: Trauma in the
region of the temporomandibular
fossa may be attributed to a
reduced vertical relation w...
6)Costen’s syndrome: is stated to be
the result of prolonged overclosure.

www.indiandentalacademy.com
CONCLUSION
 The

establishment of the vertical
maxillomandibular relations is a phase
of
prosthodontic
treatment
for
eden...
 Since

there is no precise scientific
method of determining the correct
vertical relations, the registration of
vertical...
Bibliography
 Prosthodontic

treatment for edentulous
patients – BOUCHER, 11th Edition.
 Syllabus of complete dentures –...
 Clinical

assessment of vertical dimension. JPD
1972,VOL 28(3), 238-246.
 Variations in mandibular rest position with a...
Relationship

of head posture and rest position of
mandible. JPD 1984 VOL 52 ,111.

 Determination of vertical dimensio...
www.indiandentalacademy.com
Upcoming SlideShare
Loading in...5
×

Rehabitilation /certified fixed orthodontic courses by Indian dental academy

192

Published on



The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.

Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078

Published in: Education
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
192
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
5
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "Rehabitilation /certified fixed orthodontic courses by Indian dental academy "

  1. 1. INDIAN DENTAL ACADEMY Leader in continuing dental education www.indiandentalacademy.com Vertical Jaw Relations www.indiandentalacademy.com
  2. 2. According to GPT  Vertical jaw relation are those established by the amount of separation of maxillae & mandible under specific conditions. www.indiandentalacademy.com
  3. 3.  The physiologic rest position of the mandible as related to the maxillae and the relations of the mandible to the maxillae when the teeth are in occlusion are the two dimensions of jaw separation of primary concern in complete denture construction. www.indiandentalacademy.com
  4. 4. Thus Vertical Jaw Relations are classified as (1) The Vertical Relation of Rest position (2) The Vertical Relation of Occlusion and (3) The differences between the vertical relation of rest and the occluding vertical relation, the “Interocclusal Rest Space” also known as “Freeway Space” www.indiandentalacademy.com
  5. 5. According to GPT :  “Physiologic rest position” is The postural relation of the mandible to the maxillae when the patient is resting comfortably in the upright position and the condyles are in a neutral unstrained position in glenoid fossa. www.indiandentalacademy.com
  6. 6.  When observations of physiologic rest position are being made, the patient’s head should be upright and unsupported. www.indiandentalacademy.com
  7. 7.  The force applied by the jaw opening muscles is added to the force of gravity, when the head is upright.  In a reclining patient, gravity does not pull the mandible down and so one may find the distance between the jaws to be less than it is when the head is upright. www.indiandentalacademy.com
  8. 8. Rest vertical dimension = Occlusal vertical dimension + Interocclusal distance.  During the construction of complete dentures, the Rest Vertical Dimension is determined first and then reduced or closed to the Vertical Dimension at occlusion. www.indiandentalacademy.com
  9. 9.  The second thing that establishes the vertical relation of the mandible to the maxillae is the occlusal stop provided by teeth or occlusion rims. www.indiandentalacademy.com
  10. 10. Vertical dimension of occlusion:  It is defined as the distance measured between two points when occluding members are in contact (GPT 99). www.indiandentalacademy.com
  11. 11. “Why is interocclusal space necessary???”  The health of the periodontal membranes that support the natural teeth and the health of the mucosa of the basal seat for dentures depends on rest from occlusal forces to maintain their health. www.indiandentalacademy.com
  12. 12.  For this reason, an interocclusal rest space between the maxillary and mandibular teeth is essential for the opening and closing muscles and gravity to be in balance when the muscles are in a state of minimum tonic contraction. www.indiandentalacademy.com
  13. 13.  The interocclusal rest space is the difference between the rest vertical relation and the occlusal vertical relation and amounts to 2-4 mm in a vertical direction if observed at the position of the first pre molars. www.indiandentalacademy.com
  14. 14.  Once the vertical relation of rest position has been determined, it is easy to adjust the vertical relation of the occlusion rims sufficiently to provide for the necessary interocclusal distance. www.indiandentalacademy.com
  15. 15. Methods To Record Vertical JawRelation www.indiandentalacademy.com
  16. 16. The methods for determining the vertical Maxillomandibular relations can be grouped roughly into two categories  (1) Mechanical methods  (2) Physiologic methods The use of esthetics as a guide combines both the mechanical and the physiologic approaches to the problem. www.indiandentalacademy.com
  17. 17. MECHANICAL METHOD Ridge relations A) Distance of incisive papilla from mandibular incisors. The incisive papilla is used to measure the patients vertical relation since it is a stable land mark and is changed little by resorption of the residual alveolar ridge. www.indiandentalacademy.com
  18. 18.  The distance of the incisive papilla from the incisal edge of the mandibular incisors is about 4 mm in the natural dentition.  The incisal edge of the maxillary central incisor is an average of 6mm below the incisive papilla www.indiandentalacademy.com
  19. 19.  So the average vertical overlap of the opposing central incisor is about 2 mm.  The disadvantage of this method is the absence of lower teeth and so is useful in treatment of single dentures www.indiandentalacademy.com
  20. 20. www.indiandentalacademy.com
  21. 21. B)Parallelism of the ridges Paralleling of the ridges, plus a 5 degree opening in the posterior region as suggested by Sears, often gives a clue to the correct amount of jaw separation. www.indiandentalacademy.com
  22. 22. www.indiandentalacademy.com
  23. 23.  This theory if used alone, is not reliable, because many patients present such marked resorption that the use of this rule would generally close the vertical relation.  But when considered with other observations, it may be of value.  However, in most patients the teeth are lost at irregular intervals and the residual ridges are no longer parallel. www.indiandentalacademy.com
  24. 24. 2) Measurement of former dentures: Measurements are made between the borders of the maxillary and mandibular dentures by means of a boley gauge and corresponding alterations can be made in the new denture to compensate the occlusal wear. www.indiandentalacademy.com
  25. 25. If the teeth click or if the closest speaking space is obliterated during speech, the Vertical Dimension should be reduced and the amount of reduction is determined arbitrarily. www.indiandentalacademy.com
  26. 26. Measurement of former dentures using Boley’s gauge www.indiandentalacademy.com
  27. 27. www.indiandentalacademy.com
  28. 28. 3)Pre-extraction records : It is frequently possible to see the patient before he or she becomes edentulous. In such cases, one can usually establish the occlusal position, record it in some manner and transfer this record to the edentulous situation. This is a relatively easy procedure and can be accomplished in several ways. www.indiandentalacademy.com
  29. 29. A)Profile radiograph:  The exposure of a full lateral radiograph is made with the teeth in occlusion, and after extraction occlusion rims are made to an apparently correct vertical relation.  They are inserted, the patient closes on them and another radiograph is taken.  The two films are compared and any necessary adjustment is made to bring the mandible in correct position as in the initial film. www.indiandentalacademy.com
  30. 30. Radiographs: www.indiandentalacademy.com
  31. 31.   Disadvantages  Additional  Patient  exposure  to  radiation.  Additional time (Time consuming)  Conventional  radiographic  equipment  used  to  provide  profile  R/g  is  not  available in most dentists offices.  Inaccuracy due to enlargement of the  image  www.indiandentalacademy.com
  32. 32. B) Profile photographs  Profile  photographs  are  made  and  enlarged to life size.   Measurements  of  anatomic  landmarks  on  the  photograph  are  compared  with  measurements using the same anatomic  landmarks on the face  www.indiandentalacademy.com
  33. 33.  The  photographs  should  be  made  with  the teeth in max occlusion  This was explained by W.H. Wright in  1939  certain measurements made from  previous  patients  photographs  to  measurements  on  the  patients  face,  such  as  interpupillary  distance  and  the  distances  from  lop  of  the  eyebrows  to  the base of the chin. www.indiandentalacademy.com
  34. 34.  These  measurements  can  be  compared  when  the  records  are  made  and  again  when the artificial teeth are tried in.    Disadvantage of this method is that the  angulations  of  the  photograph  might  differ with the patients.  www.indiandentalacademy.com
  35. 35.         . C) Profile Silhouettes:  An accurate reproduction of the profile  in silhouette can be cut out in  cardboard or contoured in wire.    The silhouette can be repositioned to  the face after the Vertical Dimension  has the established at the initial  recording and / or when the artificial  teeth are tried in www.indiandentalacademy.com
  36. 36.      i)Lead wire adaptation:   Lead wires may be adapted carefully to  pre extraction profiles, and this contour  is transferred to a cardboard.    The resultant cutout is stored until after  extraction.  www.indiandentalacademy.com
  37. 37.  When the dentist estimates the vertical  relation  using  the  trial  plates,  the  cardboard  cutout  is  placed  against  the  profile  in  order  to  see  whether  the  facial  contour  has  been  maintained  or  re-established.    It is not in common use today. www.indiandentalacademy.com
  38. 38.  ii)Swenson’s method(1959):  ...    Swenson  suggested  that  acrylic  resin  face  masks  made  before  the  extraction  and  later  when  the  patient  is  rendered  edentulous,  it  is  fitted  on  the  fact  to  see  whether  the  vertical relation has been restored properly.  This method is rather impractical because it  requires  a  great  deal  of  time  and  is  little  more accurate than the lead–wire technique.  www.indiandentalacademy.com
  39. 39. Swenson’s method (1959) www.indiandentalacademy.com
  40. 40. Drawbacks of this method   It is time consuming   Requires lot of skill and experience  with the use of facial impressions and  casts for the fabrication of artificial  facial parts   Lastly the face assumes a different  topography in the erect posture from  that in the recumbent or semirecumbent position  www.indiandentalacademy.com
  41. 41.  D)Facial Measurements :   Various  devices  for  Matching  facial  measurements have been used in many  different forms. www.indiandentalacademy.com
  42. 42.      www.indiandentalacademy.com
  43. 43.  i) The Dakometer www.indiandentalacademy.com
  44. 44.   ii) Willi’s gauge:                          This  instrument  is  used  for  recording  vertical  height  before  extraction.  The  arm  is  placed  in  contact  with  the  base of the nose, and the arm is moved  along the slide till it lightly but                                              firmly touches the  lower border of the chin.  www.indiandentalacademy.com
  45. 45. www.indiandentalacademy.com
  46. 46.  It  is  locked  in  position  by  the  screw.  The  distance  on  the  scale  is  recorded  on the patient’s chart.    It  is  not  an  accurate  method  as  there  may be variations is applying pressure  www.indiandentalacademy.com
  47. 47. www.indiandentalacademy.com
  48. 48. G) Articulated casts:   These  are  of  practical  value  in  the  assessment  of  the  vertical  relation.  Measurements  can  be  made  of  the  casts  in  occlusion and relatively stable points.   Such as the incisive papilla and the crest of  the  lower  ridge  the  sulcus  depth,  the  extended  height  of  the  upper  and  lower  buccal  frena  or  the  hamular  notch  and  retromolar pad.  www.indiandentalacademy.com
  49. 49.  The casts also assist in the selection of  size, shape and position of the teeth.  www.indiandentalacademy.com
  50. 50. www.indiandentalacademy.com
  51. 51. 4)POST EXTRACTION METHODS  a) Niswonger’s method:   Niswonger in 1934 suggested a method  for  determining  the  vertical  dimension  that is commonly used today.    The  patient  is  seated  so  that  the  AlaTragal line is parallel with the floor.   Two  markings  are  made,  one  on  the  upper lip below the nasal septum other  in the most prominent part of the chin.  www.indiandentalacademy.com
  52. 52. www.indiandentalacademy.com
  53. 53.  The  patient  is  told  to  swallow  and  relax.   The  distance  between  the  marks  are  recorded.   Subsequently,  the  occlusion  rims  are  constructed so that when they occlude,  the measured distance is 1/8” less than  the original measurement.   This  1/8”  average  freeway  space  falls  within 2-4 mm.  www.indiandentalacademy.com
  54. 54.  This  method  has  the  disadvantage  that  the  marks  moves  with  the  skin  and  sometimes  it  is  difficult  to  obtain  two  constant  measurements  of  the  rest  position.    However,  when  combined  with  other  observations  this  technique  is  reasonably reliable.    www.indiandentalacademy.com
  55. 55. b)Willi’s method:  Willis  believed  that  the  distance  from  the  pupil  of  the  eye  to  the  rima  oris  should  be  equal  to  the  distance  from  the  base  of  the  nose  to  the  inferior  border of the chin, when the occlusion  rims are in contact.  www.indiandentalacademy.com
  56. 56. c)Concept of equal-thirds   Some observers suggested that the face  can  be  divided  into  equal  thirds,  the  forehead,  the  nose  and  the  lips  and  chin.  This concept is of little practical value  for a  variety of reasons  www.indiandentalacademy.com
  57. 57. www.indiandentalacademy.com
  58. 58. d)Silverman’s  closest  speaking  space  which measures the vertical relation in  the  phonetic  method  must  not  be  confused with the freeway space.   The  freeway  space  established  vertical  relation when the muscles involved are  at  minimal  tonic  contraction  and  the  mandible is in its rest position.  www.indiandentalacademy.com
  59. 59. The  closest  speaking  space  measures  the vertical relation when the mandible  and  muscles  involved  are  in  physiologic function of speech.  www.indiandentalacademy.com
  60. 60.  The  occlusion  rims  are  placed  in  the  mouth and the height is adjusted until a  min of 2 mm of space exists when the  patient pronounces the letter ‘s’.    It  may  vary  from  1-10mm,  but  the  2mm average will generally prevent an  increase in vertical relation.   Disadvantage of this method is that the  patient  who  has  8–  10  mm  closest  speaking  space  will  require  other  means for determination of the vertical  relation.  www.indiandentalacademy.com
  61. 61. e) Boos method (Power point) Boos (1940) found that there is a point of maximum biting power. He states that the patient registers the greatest amount of pressure on a spring dynometer at a point considerably more open than the denture occlusion. www.indiandentalacademy.com
  62. 62.  The bimeter is attached to an accurately adapted mandibular record base.  A metal plate is attached to the vault of an accurately adapted maxillary record base to provide a central bearing point. www.indiandentalacademy.com
  63. 63.  The vertical relation is adjusted by turning the cap.  The gauge indicating the pounds of pressure generated during closure at different degrees of jaw separation www.indiandentalacademy.com
  64. 64.  When the maximum power point has been determined the set is locked. Plaster registrations are made and the cast is transferred to an articulator.  Investigators agree that such a device offers no more accuracy than Niswonger’s or Silverman’s method. www.indiandentalacademy.com
  65. 65. 6) Lytle’s method (Neuromuscular perception)  The patients tactile sense is used as a guide to determine the correct occlusal vertical relation  An adjustable central bearing screw is attached in the palate of maxillary occlusion rim and a central bearing plate in the mandible. www.indiandentalacademy.com
  66. 66. www.indiandentalacademy.com
  67. 67.  The screw is adjusted first so it is obviously too long .Then in progressive steps the screw is adjusted until the patient indicates that the jaws are closing too far.  The procedure is repeated until patient indicates that the teeth feel too long.  The screw is then adjusted until the patient indicates that the length feels right . www.indiandentalacademy.com
  68. 68. www.indiandentalacademy.com
  69. 69. www.indiandentalacademy.com
  70. 70. This method is not very effective with senile patients or those who have impaired neuromuscular coordination www.indiandentalacademy.com
  71. 71. G)Electromyography Rest position of the mandible can be determined by means of electromyography which would record the minimal activity of the muscles. All muscles show greater activity in other positions than in rest position. www.indiandentalacademy.com
  72. 72. www.indiandentalacademy.com
  73. 73. Physiologic Methods: 1) Physiologic rest position: Registration of the jaws in physiologic rest position gives an indication to a relatively correct vertical relation when used with other methods. After the insertion of the occlusion rims into the patient’s mouth, the patient is asked to swallow and let the jaws relax. www.indiandentalacademy.com
  74. 74. Then the lips are carefully parted to see how much space is present between the occlusion rims. The patients must allow the dentist to separate the lips without moving the jaws or lips. This interocclusal rest space should be between 2-4 mm when viewed in the premolar region. www.indiandentalacademy.com
  75. 75. The interarch space and rest position can be measured by indelible dots or adhesive tapes on the face. If the difference is greater than 4mm the occlusal vertical relation would be considered too small. If the occlusal vertical relation is less than 2mm the occlusal vertical relation would be assumed to be too great. www.indiandentalacademy.com
  76. 76. 2) Phonetics: Speech is used as an aid in determining the vertical relation. Phonetics tests of vertical dimension consist more of listening to speech sounds production than of observing the relationship of teeth during speech www.indiandentalacademy.com
  77. 77. The patient is asked to repeat the letter ‘M’ until he is aware of the contacting of the lips. The patient is asked to stop all jaw movements when the lips touch and the distance between the two points of reference are measured. www.indiandentalacademy.com
  78. 78. If the anterior teeth touch when these sounds are made, the vertical relation of occlusion is probably too great.  Likewise the occlusal vertical relation is also considered to be too great if the teeth click together during speech. www.indiandentalacademy.com
  79. 79. The position of the tongue and the relation of the teeth is also an imp factor. www.indiandentalacademy.com
  80. 80. 3)Facial expression: The experienced dentist learns the advantage of recognizing the relaxed facial expression when the jaws are rest. A study of the skin of the lips compared to the skin over other parts of the face can be used as guide normally the tone of the skin should be same throughout. www.indiandentalacademy.com
  81. 81. However, it must realized that the relative anteroposterior positions of the teeth are at least equally involved in the vertical relations of the jaws as in the restoration of skin tone. www.indiandentalacademy.com
  82. 82.  The contour of the lips depends on their intrinsic structure and support behind them.  Therefore the dentist must initially contour the labial surfaces of the occlusion rims so they closely simulate the anterioposterior tooth positions and the contour of the denture base which in turn,must replace or restore the tissue support provided by the natural structures. www.indiandentalacademy.com
  83. 83.  The skin around the eyes and over the chin will be relaxed.  Relaxation around the nares reflects unobstructed breathing. www.indiandentalacademy.com
  84. 84. Based on harmony of face www.indiandentalacademy.com
  85. 85. 4)Swallowing threshold:  The position of the mandible at the beginning of the swallowing act has been used as a guide to the vertical relation. www.indiandentalacademy.com
  86. 86. The theory behind the method  is that when a person swallows, the teeth come together with very light contact at the beginning of the swallowing cycle. www.indiandentalacademy.com
  87. 87.  The technique involves building a cone of soft wax on the lower denture base so that it contacts the upper occlusion rim with the jaws too wide open. www.indiandentalacademy.com
  88. 88.  The flow of saliva is stimulated and the repeated action of swallowing will gradually reduce the height of wax cone to allow the mandible to reach the level of occlusal vertical relation.  The length of time this action is carried out and relative softness of the wax cone will affect the results. www.indiandentalacademy.com
  89. 89. The length of time this action is carried out and the relative softness of the wax cone will affect the results It is difficult to find consistency in the final vertical positioning of the mandible by this method. www.indiandentalacademy.com
  90. 90. Maxillary occlusion rim should be checked for  Labial fullness  Height of occlusal rim  Anterior plane  Anteroposterior plane  Midline  High lip line  Canine lines www.indiandentalacademy.com
  91. 91. Labial fullness  The lip is normally supported by the alveolar process and teeth which,at this stage,are represented by the denture base and occlusion rim.  Therefore the labial surface must be cut back or added to until a natural and pleasing position of the upper lip is obtained. www.indiandentalacademy.com
  92. 92.  The upper lip may appear too full because the lower lip at this stage is unsupported. www.indiandentalacademy.com
  93. 93. The height of occlusal rim  The incisal edges of the maxillary incisors will be at the same position as the occlusal surface of the maxillary occlusal rim.  There are a number of variations ,which should act as guide rather than a rule,depending on the patient  In most old people less tooth will be visible owing to attrition of natural teeth and some loss of tone of orbicularis oris muscle www.indiandentalacademy.com
  94. 94. The anterior plane  The upper anterior teeth are set with their incisal edges in the same position as the occlusal surfaces of the rim it is important for the anterior plane of the rim to be trimmed to this level.  Generally the plane to which the anterior teeth to be set and to which the rim must be trimmed is parallel to an imaginary line joining the pupils of the eyes. www.indiandentalacademy.com
  95. 95. www.indiandentalacademy.com
  96. 96. Anterior posterior plane  This plane indicates the position of the occlusal surfaces of the posterior and is obtained in conjunction with the anterior plane.  The rim is trimmed parallel to alatragal line.  Studies have shown that the occlusal plane of the natural teeth is usually parallel to this line. www.indiandentalacademy.com
  97. 97. Midline Few human faces are symmetrical therefore there is no hard and fast rule for determining midline. Following aids help in deciding the vertical line on labial surface of upper rim www.indiandentalacademy.com
  98. 98.  Imaginary line from center of brows to center of skin  Immediately below center of philtrum  At the bisection of the line from corner to corner of the mouth when lips are relaxed  where it crossed by a line at right angles to the inter pupillary line from a point midway between the pupils when the patient is looking directly forward www.indiandentalacademy.com
  99. 99. Lip line  Lip line is a straight line just in contact with the inferior border of the upper lip when relaxed  High lip line is a line just in contact with the lower border of the upper lip when it is raised as high as possible unaided such as in smile or laughing www.indiandentalacademy.com
  100. 100.  High lip line indicates the amount of denture which may be seen in normal conditions and thus assists in determining the length of tooth needed. www.indiandentalacademy.com
  101. 101. Mandibular occlusion rim  Is trimmed so that when it occludes evenly with the maxillary rim as a guide at correct vertical height www.indiandentalacademy.com
  102. 102. EFFECTS OF INCREASED VERTICAL RELATION 1) Discomfort to the patient 2) Trauma: by the jamming effect of the teeth coming into contact sooner than expected may cause not only discomfort, but also pain owing to the brusing of the mucous membrane by these sudden and frequent blows. www.indiandentalacademy.com
  103. 103. 3)Loss of freeway space: which may be due to (a) muscular fatigue of any one or group of muscles of mastication. (b) Trauma caused by the constant pressure on the mucous membrane and (c) Annoyance from the inability to find a comfortable resting position. www.indiandentalacademy.com
  104. 104. 4)Clicking teeth – The tongue which has become accustomed to the presence of teeth in certain fixed positions and during speech helps to produce sounds without the teeth coming into contact. When there is increase in vertical height opposing cusps frequently meet each other, producing an embarrassing clicking or clattering sound. This effect is also produced during eating. www.indiandentalacademy.com
  105. 105. 5)Appearance – The face has an elongated appearance since, at rest the lips are parted and closing them together will produce an expression of strain. 6)Bone - Residual alveolar bone undergoes rapid resorption www.indiandentalacademy.com
  106. 106. EFFECTS OF DECREASED VERTICAL RELATION: 1)Inefficiency – which is due to the fact that the pressure with which it is possible to exert; with the teeth in contact decreases considerably with over closure because the muscles of mastication act from attachments, which have been brought close together. www.indiandentalacademy.com
  107. 107. 2) Cheek biting – In come cases where there is a loss of muscular tone, as well as reduced vertical height, the flabby cheek tends to become trapped between the teeth and bitten during mastication. www.indiandentalacademy.com
  108. 108. 3)Appearance: The general effect of overclosure on facial expression is of increased age. There is close approximation of nose to chin, the soft tissues sag and fall in and the lines on the face are deepened. The lips loose their fullness and the vermillion borders are reduced to approximate a line. www.indiandentalacademy.com
  109. 109. 4) Angular cheilitis : A reduced vertical relation results in a crease at the corners of the mouth beyond the vermillion border and the deep fold thus formed becomes bathed in saliva, thus leading to infection and soreness. www.indiandentalacademy.com
  110. 110. 5) Pain in the TMJ: Trauma in the region of the temporomandibular fossa may be attributed to a reduced vertical relation with symptoms like obscure paints, discomfort, clicking sounds, headaches and neuralgia. www.indiandentalacademy.com
  111. 111. 6)Costen’s syndrome: is stated to be the result of prolonged overclosure. www.indiandentalacademy.com
  112. 112. CONCLUSION  The establishment of the vertical maxillomandibular relations is a phase of prosthodontic treatment for edentulous patients in which it is difficult to arrive at definite conclusions from a practical view point. www.indiandentalacademy.com
  113. 113.  Since there is no precise scientific method of determining the correct vertical relations, the registration of vertical relations depends upon the clinical experience and judgment of the dentist rather than a science.  This could be the reason why there are dozens of methods in use and why one method is as good as another. www.indiandentalacademy.com
  114. 114. Bibliography  Prosthodontic treatment for edentulous patients – BOUCHER, 11th Edition.  Syllabus of complete dentures – HEARTWELL ,4th Edition.  Essentials of complete denture – WINKLER.  Complete Denture Prosthodontics- John J Sharry  Clinical Dental Prosthetics - H.R.B Fenn www.indiandentalacademy.com
  115. 115.  Clinical assessment of vertical dimension. JPD 1972,VOL 28(3), 238-246.  Variations in mandibular rest position with and without dentures in place. JPD 1976,VOL 36, 159.  Clinical study of rest position using kinesiograph and myomonitor. JPD 1979, VOL 41, 456.  Head angulation and variation in maxillomandibular relationship, Part-I : The effect on vertical dimension of occlusion. JPD 1983, VOL50 96. www.indiandentalacademy.com
  116. 116. Relationship of head posture and rest position of mandible. JPD 1984 VOL 52 ,111.  Determination of vertical dimension at rest. A comparative study.JPD 1987, VOL 59, 238. Determination of vertical dimension of occlusion : A literature review.JPD 1988, VOL 59, 327.  www.indiandentalacademy.com
  117. 117. www.indiandentalacademy.com

×