INDIAN DENTAL ACADEMY
Leader in continuing dental education
www.indiandentalacademy.com
www.indiandentalacademy.com
www.indiandentalacademy.com
Ceramics is derived from the Greek word “ keramikos ”
which means earthen (pottery). A ceramic is therefore an
earthy mate...
www.indiandentalacademy.com
www.indiandentalacademy.com
HISTORICAL MILESTONES:
♣ Ceramics were probably the first material to be artificially
made by human beings - 400,000 years...
1808: G.Fonzi first single baked porcelain teeth( terrometallic teeth).
1889 : Charles Detroit introduced low fusing porce...
1942: Fluorescent porcelains.
1956: Porcelain fused to gold systems – Brecker, Johnston.
1960’s : Vacuum firing of porcela...
1970: Development of porcelain fused to base metal.
1978: Dicor glass ceramic material by Peter Adrian.
1983: First CAD-CA...
www.indiandentalacademy.com
CLASSIFICATION OF ALL CERAMIC DENTAL
MATERIALS.

1. Sintered
2. Heat pressed
3. Slip cast
4. Castable
5. Machined
5. Other...
SINTERED ALL CERAMIC MATERIALS:

1.Alumina based:
♫ First aluminous core porcelain developed by Mclean
and Hughes in 1965....
2.Leucite Reinforced:
¥ Feldspathic porcelain containing
upto 45% volume tetragonal leucite.
¥ ↑↑ leucite content ↑↑ flexu...
Heat pressed / pressable glass ceramic:
Syn: High temperature injection moulding glass
ceramic.

♥ Glass ceramic in dentis...
▲ Advantages:
1. Excellent esthetics.
2. A translucent ceramic core.
3. A moderately high flexural strength.
4. Accurate f...
1. IPS EMPRESS ( Leucite Based )
2. IPS EMPRESS 2 ( Lithium Di Silicate Based )
Others: OPTEC OPC and OPTEC OPC 3G .
IPS E...
www.indiandentalacademy.com
IPS EMPRESS 2
( LITHIUM DI SILICATE BASED )
❃Final microstructure consists
of about 60% elongated lithium
di silicate crys...
CERESTORE ( SHRINK FREE CERAMIC )
Coors Porcelain Company; aluminium oxide prime
constituent and is partially crystallize...
★ Crystalline transformation:
● Transformation during firing results in the fired ceramic
components occupying a greater v...
SLIP CAST ALL-CERAMIC MATERIALS
 Involves condensation of an aqueous porcelain slip on a
refractory die.
 A slip is a su...
 Firing at high temperature on refractory die - refractory
shrinks more than condensed slip- helps in easy
separation.
 ...
1. Alumina based: ( IN CERAM ALUMINA )

♦ Alumina content of the slip is > 90%
♦ After firing the porous alumina coping is...
Advantages:
1. Superior flexural strength (450Mpa ).
2. High fracture toughness.
3. Accurate fit.
4. Metal free structure....
www.indiandentalacademy.com
2. Spinel ( IN CERAM SPINEL ) &
3. Zirconia ( IN CERAM ZIRCONIA ) based.
✍ ICS: glass infiltrated magnesium spinel + alumi...
CASTABLE CERAMICS ( DICOR )
☻First castable ceramic material for dental use , DICOR
was developed by Stookey at Corning gl...
☻ The glass is then covered by a protective embedment
material and subjected to heat treatment that causes
microscopic pla...
www.indiandentalacademy.com
www.indiandentalacademy.com
www.indiandentalacademy.com
Advantage of Dicor glass ceramic:
1. Ease of fabrication.
2. Improved esthetics.
3. Minimal processing shrinkage.
4. Good ...
CERA PEARL
♣ Jack Preston & Kyocera Bioceram group developed a
castable apatite ceramic called Cera pearl.
♣ SEM : shows c...
HI-CERAM
♪ This system is based on the refractory die system.
♪ After the die has hardened the core is built of
strengthen...
CAD-CAM RESTORATIONS .
♣ 1979-Hetlinger & Rodder followed by Moerrmann and
Brandesten in 1980 were the pioneers in the dev...
♣ The CAD system uses the encoded information to allow
the operator to visualize an impression on a graphic screen
and to ...
Conclusion:

Dentists have searched long for ideal restorative material,
with the rapid advances in the modern technologie...
www.indiandentalacademy.com
www.indiandentalacademy.com
www.indiandentalacademy.com
www.indiandentalacademy.com
Leader in continuing dental education

www.indiandentalacademy.com
Upcoming SlideShare
Loading in...5
×

Evolution of Dental ceramic restorations /certified fixed orthodontic courses by Indian dental academy

2,453

Published on

Welcome to Indian Dental Academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.


Indian dental academy has a unique training program & curriculum that provides students with exceptional clinical skills and enabling them to return to their office with high level confidence and start treating patients

State of the art comprehensive training-Faculty of world wide repute &Very affordable.

Published in: Education, Business, Technology
0 Comments
15 Likes
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
2,453
On Slideshare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
0
Comments
0
Likes
15
Embeds 0
No embeds

No notes for slide

Evolution of Dental ceramic restorations /certified fixed orthodontic courses by Indian dental academy

  1. 1. INDIAN DENTAL ACADEMY Leader in continuing dental education www.indiandentalacademy.com www.indiandentalacademy.com
  2. 2. www.indiandentalacademy.com
  3. 3. Ceramics is derived from the Greek word “ keramikos ” which means earthen (pottery). A ceramic is therefore an earthy material usually of silicate nature . Defn : ( Gilman -1967 ) Ceramics is defined as a combination of one or more metals with a non-metallic element usually oxygen. The large atoms of oxygen serve as a matrix with smaller metal atoms tucked into the spaces between the oxygen. www.indiandentalacademy.com
  4. 4. www.indiandentalacademy.com
  5. 5. www.indiandentalacademy.com
  6. 6. HISTORICAL MILESTONES: ♣ Ceramics were probably the first material to be artificially made by human beings - 400,000 years ago. ♣ Fabrication of ceramic articles 23,000 years ago. Historically three types of ceramic materials, @ Earthen Ware : fired at low temperature. @ Stone Ware : fired at greater temperature. @ Porcelain : developed in king-te-tehing in china 1000 A.D ♣ ♣ 1774: Alexis Duchateau – tried to make a pair of denture for himself but was unsuccessful. 1788: He teamed up with Nicholas De Chemant constructed complete denture- mineral paste . ♣ www.indiandentalacademy.com
  7. 7. 1808: G.Fonzi first single baked porcelain teeth( terrometallic teeth). 1889 : Charles Detroit introduced low fusing porcelains and porcelain jacket crown. 1890: Capon and Hugh Avery introduced porcelain inlay. 1894: Electric furnace for porcelain by Levitt. 1895: Christensen introduced high fusing porcelain inlays. 1923: First casting of porcelain by Wain. www.indiandentalacademy.com
  8. 8. 1942: Fluorescent porcelains. 1956: Porcelain fused to gold systems – Brecker, Johnston. 1960’s : Vacuum firing of porcelain 1963: Mclean and Hughes alumina reinforced crowns. 1968: Glass ceramics by McCulloch. 1969: Droge described ceramic pressed technique. www.indiandentalacademy.com
  9. 9. 1970: Development of porcelain fused to base metal. 1978: Dicor glass ceramic material by Peter Adrian. 1983: First CAD-CAM prototype 1983: Glass ceramics systems. 1990’s: Cera Pearl ceramic, Hydroxyapatite ceramics. After 1990’s: Ceramic implants and coatings, all ceramic implant abutments, ceramic posts, resin bonded porcelains, ceramic laminates, ceramic nano materials. www.indiandentalacademy.com
  10. 10. www.indiandentalacademy.com
  11. 11. CLASSIFICATION OF ALL CERAMIC DENTAL MATERIALS. 1. Sintered 2. Heat pressed 3. Slip cast 4. Castable 5. Machined 5. Others a) Alumina based. b) Leucite based. c) Magnesia based. a) Leucite based. b) Lithium di silicate based. a) Alumina based. b) Spinel based. c) Zirconia based. a) Dicor. b) Cera Pearl. a) Mica based b) Alumina based c) Zirconia based. a) Hi-Ceram. www.indiandentalacademy.com
  12. 12. SINTERED ALL CERAMIC MATERIALS: 1.Alumina based: ♫ First aluminous core porcelain developed by Mclean and Hughes in 1965. ♫ Contains 40 -50 % alumina by wt., the core was baked on a platinium foil and later veneered with matched expansion porcelain. ♫ High modulus of elasticity and high fracture toughness . ♫ Uses : limited to internal core construction because they had less translucency. www.indiandentalacademy.com
  13. 13. 2.Leucite Reinforced: ¥ Feldspathic porcelain containing upto 45% volume tetragonal leucite. ¥ ↑↑ leucite content ↑↑ flexural and compressive strength. ¥ ↑↑ opposing tooth wear and reduced opalescence. 3.Magnesium based core porcelains: ►Similar to that of leucite reinforced sintered porcelain. ► Advantage easy to veneer in laboratory with widely available ceramics. www.indiandentalacademy.com SINTERED CERAMICS ARE REPLACED BY NEWER
  14. 14. Heat pressed / pressable glass ceramic: Syn: High temperature injection moulding glass ceramic. ♥ Glass ceramic in dentistry: MacCulloch in 1968. ♥ Glass ceramic is a material formed into a desired shape as a glass then subjected to heat treatment to induce partial devitrification ( loss of glassy structure by crystallization of glass). ♥ The formed crystal particles ( needle or plate shaped) interrupt crack propagation. ♥ It is used in dentistry to produce all-ceramic crowns , inlays, onlays , veneers and more recently FPD’s. www.indiandentalacademy.com
  15. 15. ▲ Advantages: 1. Excellent esthetics. 2. A translucent ceramic core. 3. A moderately high flexural strength. 4. Accurate fit. ▼ Disadvantages: 1. High initial cost. 2. Fracture in posterior areas. 3. Needs resin cement for bonding. www.indiandentalacademy.com
  16. 16. 1. IPS EMPRESS ( Leucite Based ) 2. IPS EMPRESS 2 ( Lithium Di Silicate Based ) Others: OPTEC OPC and OPTEC OPC 3G . IPS EMPRESS - LEUCITE BASED ✍ 35-50 % leucite content. ✍ Ceramic ingots are pressed b/w 1150 & 1180.C ; pressure of 0.3 to 0.4 MPa into the refractory mold produced by lost wax technique. ✍ Final microstructure of these heat pressed ceramics consisted of leucite crystals 1-5µm in size & dispersed in a glassy matrix. www.indiandentalacademy.com
  17. 17. www.indiandentalacademy.com
  18. 18. IPS EMPRESS 2 ( LITHIUM DI SILICATE BASED ) ❃Final microstructure consists of about 60% elongated lithium di silicate crystals (0.5 to 5µm long) dispersed in a glassy matrix. PROPERTY IPS EMPRESS EMPRESS2 1.Flexural strength(Mpa) 112 +/- 10 +/- 40 2.# Toughness(Mpa.m1/2 ) 1.3 +/- 0.1 3.COTE (ppm/.C) 15 +/www.indiandentalacademy.com0.25 4.Chemical durability( µg/cm2 ) 100 -200 IPS 400 3.3 +/- 0.3 10.6 +/-0.25 50
  19. 19. CERESTORE ( SHRINK FREE CERAMIC ) Coors Porcelain Company; aluminium oxide prime constituent and is partially crystallized as α-aluminium oxide.  mixture of alumina, wax ,silicone resin , magnesia and A glass -- heated to allow flow and injected into the mould.  offsets conventional ceramic shrinkage by a It combination of chemical and crystalline transformation.  Chemical transformation: Silicone resin used as binder compensates for shrinkage during firing by converting SiO to SiO2 at 160-800.c . www.indiandentalacademy.com
  20. 20. ★ Crystalline transformation: ● Transformation during firing results in the fired ceramic components occupying a greater volume than the raw ingredients. ● Alumina + magnesia ----------> SPINEL . ● Volume expansion 6.87%. ● Core thickness -0.5mm & veneer - 0.8mm. ✓ Indications: 1.Anterior & posterior restorations. 2. Finds it’s application where metal ceramic restoration are indicated. ✗ Contraindications: 1. Inadequate thickness < 1.3mm. www.indiandentalacademy.com
  21. 21. SLIP CAST ALL-CERAMIC MATERIALS  Involves condensation of an aqueous porcelain slip on a refractory die.  A slip is a suspension of fine insoluble particles in a liquid.  The porosity of the refractory helps condensation by absorbing water from the slip by capillary action. www.indiandentalacademy.com
  22. 22.  Firing at high temperature on refractory die - refractory shrinks more than condensed slip- helps in easy separation.  Fired porous core is later glass infiltrated , a unique process in which molten glass is drawn into the pores by capillary action at high temperature.( 1100 .C for 4 hrs ) Advantages: 1. Reduced porosity 2. High toughness. 3. Fewer defects from processing. www.indiandentalacademy.com
  23. 23. 1. Alumina based: ( IN CERAM ALUMINA ) ♦ Alumina content of the slip is > 90% ♦ After firing the porous alumina coping is shaped and infiltrated with a lanthanum containing glass during a second firing at 1120 ċ for 4 hrs. ♦ After removal of excess glass the restoration is veneered using matched expansion veneer porcelain. ICA core : 70% wt alumina + 30% wt sod. Lanthanum glass. www.indiandentalacademy.com
  24. 24. Advantages: 1. Superior flexural strength (450Mpa ). 2. High fracture toughness. 3. Accurate fit. 4. Metal free structure. Disadvantages: 1. Increased cost . 2. More time , special equipment . 3. For long span F.P.D????? 4. Inability to etch. 5. Technique Sensitive. 6. High degree of opacity. www.indiandentalacademy.com
  25. 25. www.indiandentalacademy.com
  26. 26. 2. Spinel ( IN CERAM SPINEL ) & 3. Zirconia ( IN CERAM ZIRCONIA ) based. ✍ ICS: glass infiltrated magnesium spinel + alumina traces. ✍ ICZ: 30% wt tetragonal zirconia + 70% alumina. ✍ ICS is preferred in clinical situations where adjacent teeth or restorations are quite translucent. ✍ ICZ was developed by Vita for providing a stronger and tougher material indicated for posterior crowns and three unit FPD's. www.indiandentalacademy.com
  27. 27. CASTABLE CERAMICS ( DICOR ) ☻First castable ceramic material for dental use , DICOR was developed by Stookey at Corning glass works & marketed by Dentsply international. ☻ DICOR is a castable glass that is formed into an inlay, facial veneer , or full crown restoration by lost wax process similar to metals. ☻ After the glass casting core / coping is recovered - sand blasting - sprues cut away. www.indiandentalacademy.com
  28. 28. ☻ The glass is then covered by a protective embedment material and subjected to heat treatment that causes microscopic plate like crystals of crystalline material (mica) to grow within the glass matrix. This crystal nucleation & crystal growth process is called Cerraming. ☻ Once cerramed - fit on prepared dies -ground -coated with veneering porcelain to match the shape and appearance of adjacent teeth. ☻ Chameleon effect. ☻ DICOR GLASS contains 55% vol tetra silicic flour mica crystals. www.indiandentalacademy.com
  29. 29. www.indiandentalacademy.com
  30. 30. www.indiandentalacademy.com
  31. 31. www.indiandentalacademy.com
  32. 32. Advantage of Dicor glass ceramic: 1. Ease of fabrication. 2. Improved esthetics. 3. Minimal processing shrinkage. 4. Good marginal fit. 5. Moderately high flexural strength. 6. Low thermal expansion. 7. Minimal abrasiveness to tooth enamel. Disadvantages: 1. Cannot be used in high stress areas. 2. Internal coloring not possible. 3. Outer shading layer of porcelain causes more wear to tooth structure. www.indiandentalacademy.com
  33. 33. CERA PEARL ♣ Jack Preston & Kyocera Bioceram group developed a castable apatite ceramic called Cera pearl. ♣ SEM : shows crystalline microstructure of cerapearl similar to enamel but have an irregular arrangement which provides superior mechanical strength). ♣ It is indicated for crowns , inlays and laminate veneers. www.indiandentalacademy.com
  34. 34. HI-CERAM ♪ This system is based on the refractory die system. ♪ After the die has hardened the core is built of strengthened aluminium oxide core material - firing. ♪ The die material is removed by abrasive spraying. The margin must be protected during this procedure. * Advantages: 1. Excellent physical properties. 2. Simple technique. * Disadvantages: 1. Time consuming. 2. May cause damage to margins. www.indiandentalacademy.com
  35. 35. CAD-CAM RESTORATIONS . ♣ 1979-Hetlinger & Rodder followed by Moerrmann and Brandesten in 1980 were the pioneers in the development of the CAD/CAM restoration. ♣ 1983- first CAD/CAM prototype was presented at the Garanciere conference ( France). ♣ 1985-first crown was publicly milled & installed in a mouth without any laboratory involvement. ♣ An electro-optical method is used to obtain the impression. The light carries the volumetric information, which is digitized by the camera & fed into computer. www.indiandentalacademy.com
  36. 36. ♣ The CAD system uses the encoded information to allow the operator to visualize an impression on a graphic screen and to design a prosthesis. ♣ In the last step the preformed cubical block of the material is milled to fabricate a prosthesis. www.indiandentalacademy.com
  37. 37. Conclusion: Dentists have searched long for ideal restorative material, with the rapid advances in the modern technologies it seems the search is at its end. Ceramics have given us various options in restorative treatment such as crowns, laminates , inlays , onlays , post , abutments etc., with lot of reliability. Dental ceramics are reliable coz, of their biocompatibility, long term color stability, wear resistance and their ability to be formed in precise shapes. Ceramic restorations are revolutionizing dentistry since past 2 decades & in days to come still better versions of ceramic are anticipated. www.indiandentalacademy.com
  38. 38. www.indiandentalacademy.com
  39. 39. www.indiandentalacademy.com
  40. 40. www.indiandentalacademy.com
  41. 41. www.indiandentalacademy.com Leader in continuing dental education www.indiandentalacademy.com

×