See what is going on.
Only with the new
With more functions such as
binary switching output, timer
functions as output, damping
function as well as NC / NO
Process values, parameter setting
data and diagnostic information
can be transmitted via IO-Link.
Parameter setting via IO-Link
before installation, as an alter-
native also via pushbuttons on
Simple parameter setting of
many sensors via “copy & paste”
in the LINERECORDER SENSOR
software or via a memory plug.
Clearly visible LEDs indicate the
Easy installation with mounting
adapters and cable ties.
Capacitive sensors for
position and level detection
Non-metallic media under control.
Capacitive sensors are used to detect
liquids and bulk materials.
Detection can be carried out through
non-metallic tank walls, e.g. in the
case of direct installation at a sight
glass or bypass.
detect the level of
milk through the
Display and evaluate process values
For more information, such as technical data,
application videos or prices please go to
Easy parameter setting with the
The LINERECORDER SENSOR software
simplifies parameter setting and moni-
toring of different sensors. Thanks to
the software uniform parameter set-
ting is possible for each IO-Link sensor.
Ready for use in a multitude of
Capacitive M18 or M30 threaded
housings reliably detect the level of
plastic granulates at temperatures
up to 250 °C. The sensors feature high
From sensor to
modules and gate-
ways the sensors
can be integrated
into the IT struc-
ture and thus be
nosed and config-
ured from a central
point. This results
in maximum trans-
Enterprise Resource Planning (ERP)
Field module DP
Visit our website:
ifm electronic gmbh
Tel. +49 / 201 / 24 22-0
Fax +49 / 201 / 24 22-1200
ifm product range:
Over 70 locations worldwide –
at a glance at www.ifm.com