International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976
6545(Print), ISSN 0976 – 6553(Online) Vo...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976
6545(Print), ISSN 0976 – 6553(Online) Vo...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976
6545(Print), ISSN 0976 – 6553(Online) Vo...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
6545(Print), ISSN 0976 – 6553(Online) ...
Upcoming SlideShare
Loading in …5
×

A single rating inductor multilevel current source inverter with pwm strategie

682 views
589 views

Published on

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
682
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
19
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

A single rating inductor multilevel current source inverter with pwm strategie

  1. 1. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 274 A SINGLE RATING INDUCTOR MULTILEVEL CURRENT SOURCE INVERTER WITH PWM STRATEGIES AND FUZZY LOGIC CONTROL B.Lakshmi.R EEE Dept., Shri Vishnu Engg. College for Women, Bhimavaram, AP, INDIA ABSTRACT In this paper a unique single rating inductor multilevel current source inverter (MCSI) is explored taking advantage of the three different redundant zero states of the topology. The proposed MCSI consists of identical modules in which the current flow is same in all the inductors. The control and gate signal generation is achieved by Phase-Shifted Carrier SPWM with proper implementation of a new state machine approach, which is easy to implement and allows both current balance and minimized switching frequency with higher efficiency for industrial applications. Space vector modulation is also implemented which will be an alternative for gate signal generation. The performance of a seven level, three modules, arrangement is analyzed and is thoroughly simulated with Matlab Simulink. Keywords: fuzzy logic control, multilevel current-source inverter (MCSI), phase-shifted carrier SPWM (PSC-SPWM), redundant zero states, space vector modulation. I. INTRODUCTION Multilevel voltage source converters have captured investigators attention and have been used in major applications involving high power, while current source inverters have not been in focus. Recent trends of electronic switches, which can rapidly turn on and off such as insulated gate bipolar transistors (IGBT), emitter turn-off thyristors (ETO), [13] dual gate commutated thyristors (Dual GCT), [12] integrated gate-thyristors (IGCT)], and low-losses SiC devices, has allowed the implementation of sinusoidal pulse with modulation (SPWM) and space vector modulation (SVPWM) techniques and multilevel schemes powered by a current source, ensuing low distortion and fast dynamic response in high-power applications. INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY (IJEET) ISSN 0976 – 6545(Print) ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), pp. 274-286 © IAEME: www.iaeme.com/ijeet.asp Journal Impact Factor (2013): 5.5028 (Calculated by GISI) www.jifactor.com IJEET © I A E M E
  2. 2. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 275 Multilevel topologies present several advantages regarding total harmonic distortion and stress on inductors and switches, Several Multilevel-CSI topologies have been developed.Multi- rating-inductor-MCSI requires only two balance inductors for two adjacent modules, and every pair of balance inductors carry different current values. There are no balance inductors in the paralleled H-bridge-MCSI although the use of multiple independent dc current sources is necessary. In this paper a single-rating-inductor-MCSI is employed to feed a three phase load. The converter consists of a number of identical modules which determine the different current levels. Each module uses two balance inductors and six power switches. All inductors of every module should carry the same current values. The current flowing through the inductors can be balanced and switching frequency can be reduced by applying a state machine modulation that properly uses redundant zero states. The selected topology has as many degrees of freedom to impose different current levels in the three phases of the load as inductors acting as current sources. They are a smart choice to improve performance and efficiency in industrial applications[14],where high power or low voltage and high current are required, such as grid integration of renewable sources ,induction motor drives, high-voltage direct-current (HVDC), flexible alternating current transmission system (FACTS).CSI drives also have reliable short-circuit and overcurrent protection The current flowing through the inductors can be balanced, and switching frequency can be reduced by applying a state-machine modulation that properly uses redundant zero states. Industrial assembles are easy to develop and to operate because all modules are identical[5].The behavior of this converter is very different from the behavior of the traditional MVSI. Herein, each module carries a fraction of the load current, and there is no separation of modules or switches per phase as occur in an MVSI. In this paper, the SPWM logic has been modified for better performance and simple approach is presented showing that current balance can be provided by adapting a well-known SPWM [5] and SVPWM as an alternative strategy while minimizing switching speed using a novel sequential machine design. In terms of power system control Multilevel concept offers new horizons, with the ability to independently control the power system parameters like line active and reactive powers and bus voltage. The multilevel concept also has the advantages like voltage capability, inductors current continuity, decreased switching frequency and total harmonic distortion (THD) and thereby decreasing switching losses. However, the increase in the use of the electronic switches due to the increase in the output current levels demands an advanced control technique to the lower order harmonics enhance the complex operation. To mitigate the lower order harmonics Space Vector Pulse Width Modulation (SVPWM) is an advanced modulation technique with optimized switching strategy. The most effective fuzzy logic control is used to reduce the distortions in main source current where a PI controller is used normally. In detail, this paper is organized as follows The circuit is brainy described in Section II- A, followed by an analysis of the most important topics of the modulation method in Section II-B–D- E. Section III presents the evaluation of the performance of the proposed inverter with simulation results. 2. NOVEL CSI ARRANGEMENT 2.1. Switching Structure The converter topology presented in Fig. 1, also known as “single-rating inductor MCSI”, connected in parallel with the load and sharing a common current source consists of multiple CSI sub circuits Each module consists of six switches and two inductors. In this inverter, each module consists of two inductors and two inductors in series with the main current source splits the current in equal shares from the main source which requires a very careful startup design. The main advantage of this Multilevel CSI configuration is its modular structure, where each identical module handles
  3. 3. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 276 only a fraction of the load current. The number of levels in output current can be determined according to the number of modules “m” in ݅௡ ൌ ௠ି௡ ௠ ݅ௗ௖ Where n=0, 1 ...2m (1) Where m represents the number of modules and n goes from 0 to 2m. In this paper we consider m=3 to obtain seven levels of load current ௜೙ ௜೏೎ ൌ 1, ଶ ଷ , ଵ ଷ , 0, െ ଵ ଷ , െ ଶ ଷ , െ1 (2) Fig. 1: Basic MCSI scheme The number of levels n in the output current can also be determined according to the number of modules m in n = 2m+1, where m=1, 2, 3,....... .To obtain seven levels in the output current we require 18 switches with bidirectional voltage blocking capability and six inductors i.e., two inductors per module and two current sharing inductors in series with the main current source. Distinguished load currents can be obtained by turning on and off each switch. An example of a valid switch combination is shown in Fig. 2, and its corresponding switches states are presented in Table I. In example 1, the switches A1, B1 and C1 are on, while a third of supply current “I“ is conducted by each branch. Current into phase R equals “I”. The current in phase S is I/3 flowing from the load to the source through switch A5 and the current on phase T is 2/3I flowing towards the source through switches B6 and C6. The analysis of example 2 is analogous, providing 2/3I and 1/3I into phases R and S respectively, while all current I flows outwards phase T. Solid lines in Fig. 3 show the current paths through the whole converter down to the load for the examples described previously. By changing more than one combination of switches each output current level can be generated .This acts as an great advantage for MCSI compared to MVSI by minimising the switching frequency and current control balance in the inductors of the converter which ultimately gives more degrees of freedom than the traditional MVSI.
  4. 4. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July Fig. 2: Current flow according to the switches in the on TABLE 1: Switching combinations for examples in fig.2 2.2. SPWM of One Module SPWM Modulation is based on the comparison of a sinusoidal control signal with a triangular carrier. Depending on the control signal whether it is greater or smaller than the carrier the switches on each single branch are turned on or off. The standard three phase sine waves are given as control signals for three phase loads. If SPWM is chosen signals PR, PS, PT (Fig. 4b), generated can be used to turn on and off the switches in each leg of the inverter by comparing one triangul implement in CSI, in order to guarantee that the current of the module is imposed to a certain phase of the load. The driving signals are obtained with some more manipulation of the signals to obtain desired output current level, assuring current continuity in all th PT two at a time (PR PS, PS PT, PT PR) is performed to identify which levels and LR, LS, LT (Fig. 4c) are obtained. These signals indicate when each phase should deliver current but they have no information of their polarity. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 277 Current flow according to the switches in the on-state Switching combinations for examples in fig.2 2.2. SPWM of One Module SPWM Modulation is based on the comparison of a sinusoidal control signal with a triangular arrier. Depending on the control signal whether it is greater or smaller than the carrier the switches on each single branch are turned on or off. The standard three phase sine waves are given as control signals for three phase loads. If SPWM is chosen for voltage source inverters (VSI), the gate b), generated can be used to turn on and off the switches in each leg of the inverter by comparing one triangular with three sine waves (Fig. 4a).But this is not so easy to CSI, in order to guarantee that the current of the module is imposed to a certain phase of the load. The driving signals are obtained with some more manipulation of the signals to obtain desired output current level, assuring current continuity in all the inductors. First an XOR of PR, PS, PT two at a time (PR PS, PS PT, PT PR) is performed to identify which of the branches have equal c) are obtained. These signals indicate when each phase should deliver ve no information of their polarity. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – August (2013), © IAEME SPWM Modulation is based on the comparison of a sinusoidal control signal with a triangular arrier. Depending on the control signal whether it is greater or smaller than the carrier the switches on each single branch are turned on or off. The standard three phase sine waves are given as for voltage source inverters (VSI), the gate b), generated can be used to turn on and off the switches in each leg of the a).But this is not so easy to CSI, in order to guarantee that the current of the module is imposed to a certain phase of the load. The driving signals are obtained with some more manipulation of the signals to obtain e inductors. First an XOR of PR, PS, of the branches have equal c) are obtained. These signals indicate when each phase should deliver
  5. 5. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July Fig. 3: Current Flow International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 278 Current Flow a)Example 1 b)Example 2 Fig.4: SPWM modulation International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – August (2013), © IAEME
  6. 6. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 279 Fig. 5: Gate Signal Logic Diagram This means that signals Li combine both upper and lower switch signals in each branch (LR A1 and A4, LS A2 and A5, LT A3 and A6). It is still necessary to identify whether the upper or the lower switch should carry the current. This is performed with the help of signals Si (Fig. 4d) which represent the polarity of the reference currents of each leg. Upper switch gate signal is obtained by performing a logical AND of Li with Si. Lower switch gate signal is the logical AND of Li with logical complement of Si [5]. The resulting six active states are shown in table II. Fig. 5 shows the corresponding logic diagram. The combination of the valid conditions of all the switches form a set of six active valid states that are shown in Table 2. Space vector modulation can be an alternative, although it requires some higher computing efforts. Table 2: Direct SPWM Gate Signals 2.3. Minimum Switching-Frequency Zero-State Selection Firing signals generated in Fig. 5e cannot directly drive IGBT’s gates since they generate zero states by turning off all switches[1]. This does not allow inductor’s current continuity in a CSI, e. g. time “z” in Fig. 4. Zero states generated by the SPWM logic should be recognized and replaced by adequate zero states according to the CSI topology[7] as is developed in this section. A CSI module can generate zero states in seven different ways as shown in Fig. 7 (where on switches are highlighted). Closing all six switches (Fig. 6a) is the simplest implementation at the expense of greater losses. The most efficient solution is closing only the two switches of a branch (Fig. 6b) in terms of switching frequency. The worst case of combination of switches is shown in Fig. 6c, hence it will not be considered. The identification of the six main sequences as shown in Fig. 8, e.g. sequence A is a string of states 6, 2 and 0 in the form “…0 2 6 0 6 2 0 2 6 0 6 2 0…”is easy for Performing a detailed analysis of the commutation signals (A1…A6) generated with SPWM (Fig.
  7. 7. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 280 5e) it is easy to identify six main Each active state (1 to 6) is generated as described in section II-B and represents a combination of switches in a module according to table II. Each sequence (A to F) is a state of the sequential machine displayed in Fig. 9. The jump from one sequence to the next is performed by detecting a switching state that does not belong to the current sequence, e.g. sequence B will run until a state 1 is generated by the PWM logic, then sequence C will be initiated. Correct zero state implementation is mandatory when minimizing switching frequency, avoiding unnecessary switches’ changes inside a sequence thus lowering power dissipation. Minimum switching frequency can be accomplished by correctly choosing the zero state in each sequence. The table 3 shows that only one zero combination is assigned to each sequence in order to minimize the switching frequency. For example, during sequence B, turning on switches A1 and A4 as zero state avoids that A1, A2 and A3 have to change state while the sequence is active. Logic state machine replaces zero states generated by SPWM (all switches closed) by optimal zero combination according to the active sequence. The active states are not affected by the state machine and pass through unchanged. Fig. 9 shows the gate signals of switch A1 as an example of the effect of the sequential machine on commutation of the power switches. Gate signals generated with the state machine zero selection (Fig. 9b) have much less commutations per cycle than all switches closed (Fig. 6a) zero approach (Fig. 9a). Fig. 6: Seven zero states possible for one CSI module Fig. 7: Six Commutation Sequences
  8. 8. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 281 Fig. 8: Sequence of states Table 3: Minimum switching frequency gate signals Fig. 9: Gate signal for switch A1 a)SPWM b)sequential state machine
  9. 9. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 282 2.4. Multilevel Operation: PSC-SPWM Multiple modules are arranged to produce a multilevel output current. Since load voltage may affect the current balance over the sharing inductors a careful choice of the PWM should be performed. The simplest way is to adopt a Phase-Shifted Carrier SPWM [3], [4].The PSC-SPWM uses as many triangular carriers as modules have the converter. These carrier waves are delayed an angle Øk = ଶగ ௠ k .where k=1,2,......m (3) where m=3 and k goes from 1 to m as shown in Fig. 10 Fig. 10: PSC-SPWM modulation The output current level is controlled by setting the reference sine waves amplitude. The amplitude modulation index ma is then defined as, mୟ ൌ ୚౩౟౤౛ ୚౪౨౟౗౤ౝ౫ౢ౗౨ 2.5. Space vector pulse width modulation Every switching state can be represented as a vector in the converters α-β space vector plane. The three phase currents can be transformed into two phase currents in α-β plane as represented below. ൤ ݅ఈሺ௧ሻ ݅ఉሺ௧ሻ ൨= ଶ ଷ ቎ 1 െ ଵ ଶ െ ଵ ଶ 0 √ଷ ଶ െ √ଷ ଶ ቏ ቎ ݅௪஺ሺ௧ሻ ݅௪஻ሺ௧ሻ ݅௪஼ሺ௧ሻ ቏ (4) A resulted space vector can be expressed as equation I(t)= ݅ఈሺ௧ሻ ൅ j݅ఉሺ௧ሻ (5) This can be rewritten as equation i(t) =ቂ݅௪஺ሺ௧ሻe୨଴ ൅ ݅௪஻ሺ௧ሻe୨ మπ య ൅ ݅௪஼ሺ௧ሻe୨ రπ య ቃ (6) ݅௪஺ = ಺೏ మ , ݅௪஻ୀ െ ‫ܫ‬ௗ , ݅௪஼ ൌ ூ೏ ଶ (7) Substituting the switching currents into equation (6), the resulted vector of switching state can be driven. The resulted vectors are shown in a diagram which is called space vector diagram shown in fig.12 since, the space vectors do not move, they are called stationary vectors. On the other
  10. 10. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July hand, the desired three-phase current on the AC side IW can be expressed as a reference vector rotating counter clockwise in the vector plane. Each revolution of the reference an entire fundamental cycle of the AC current. In other words, the reference current vector rotates at the desired AC frequency. The ratio between the can be synthesized by the adjacent vector and the DC current determines the modulation index of the converter. sequences are available but they are associated with different device switching frequencies and harmonic profiles. The harmonic profile of the conventional SVM is undesirable for AC filter design in the CSC. The AC capacitor together with the power supply side inductance or machine side inductance will cause LC resonances. The resonance frequency is no of the fundamental frequency to ensure not only desired current quality but also acceptable cost. The low order harmonic currents, 5th and 7th orders in specific, will cause harmonic voltages as well as resonance problems. Fig. 11: 3. SIMULATION RESULTS The proposed seven-level converter consists on three modules. Each switch is implemented with an IGBT transistor and a series diode to allow bidirectional voltage bl simple buck converter, with autonomous SPWM and a fuzzy logic control, provides the energy to the main inductors. The performance of the proposed converter is simulated with Matlab Simulink. The converter arrangement is composed of three identical modules, each one built with six IGBTs with series diodes. The sequential state machine for each module is implemented with Simulink’s state tool. The output current of the simula 2/3I, 1/3I, 0, −1/3I, −2/3I, −I) can be recognized. A capacitor bank is used to filter the output current The main parameters of the inverter is summarised i regulated with a fuzzy logic control, acting on the firing angle of input rectifier’s thyristors. The reverse power capability of the input rectifier allows four of the load. The inverter output current is shown in Fig. 12a, where the seven leve 1/3I, -2/3I, -I) can be recognized. . A capacitor bank is used to filter the output current. The main parameters of the inverter is summarised in the table IV. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 283 phase current on the AC side IW can be expressed as a reference vector rotating counter clockwise in the vector plane. Each revolution of the reference vector corresponds to an entire fundamental cycle of the AC current. In other words, the reference current vector rotates at the desired AC frequency. The ratio between the magnitudes of the reference the reference vector space vectors based on the principle of ampere vector and the DC current determines the modulation index of the converter. Several switching sequences are available but they are associated with different device switching frequencies and monic profiles. The harmonic profile of the conventional SVM is undesirable for AC filter design in the CSC. The AC capacitor together with the power supply side inductance or machine side inductance will cause LC resonances. The resonance frequency is normally between 3.5pu to 4.5 P.u of the fundamental frequency to ensure not only desired current quality but also acceptable cost. The low order harmonic currents, 5th and 7th orders in specific, will cause harmonic voltages as well as space vector diagram for 7-level CSI level converter consists on three modules. Each switch is implemented with an IGBT transistor and a series diode to allow bidirectional voltage blocking capabilities. A simple buck converter, with autonomous SPWM and a fuzzy logic control, provides the energy to the The performance of the proposed converter is simulated with Matlab Simulink. The converter mposed of three identical modules, each one built with six IGBTs with series diodes. The sequential state machine for each module is implemented with Simulink’s state tool. The output current of the simulated inverter is shown in Fig. 12(a), where the I) can be recognized. A capacitor bank is used to filter the output current rter is summarised in the table 4.The currents in main inductors are trol, acting on the firing angle of input rectifier’s thyristors. The reverse power capability of the input rectifier allows four-quadrant operation or regenerative braking of the load. The inverter output current is shown in Fig. 12a, where the seven levels (I, 2/3I, 1/3I, 0, . A capacitor bank is used to filter the output current. The main parameters of the inverter is summarised in the table IV. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – August (2013), © IAEME phase current on the AC side IW can be expressed as a reference vector vector corresponds to an entire fundamental cycle of the AC current. In other words, the reference current vector rotates at he reference vector space vectors based on the principle of ampere-second balance Several switching sequences are available but they are associated with different device switching frequencies and monic profiles. The harmonic profile of the conventional SVM is undesirable for AC filter design in the CSC. The AC capacitor together with the power supply side inductance or machine side rmally between 3.5pu to 4.5 P.u of the fundamental frequency to ensure not only desired current quality but also acceptable cost. The low order harmonic currents, 5th and 7th orders in specific, will cause harmonic voltages as well as level converter consists on three modules. Each switch is implemented ocking capabilities. A simple buck converter, with autonomous SPWM and a fuzzy logic control, provides the energy to the The performance of the proposed converter is simulated with Matlab Simulink. The converter mposed of three identical modules, each one built with six IGBTs with series diodes. The sequential state machine for each module is implemented with Simulink’s state flow (a), where the seven levels (I, I) can be recognized. A capacitor bank is used to filter the output current. n the table 4.The currents in main inductors are trol, acting on the firing angle of input rectifier’s thyristors. The quadrant operation or regenerative braking ls (I, 2/3I, 1/3I, 0, - . A capacitor bank is used to filter the output current. The main
  11. 11. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 284 Table 4: Inverter parameters Figure 12: a) Inverter Output Current b) Load Current Figure 13: Inductor Current Balance a)Inductor Current b)sharing inductor current The output current is filtered to the load (Fig. 12b) with low distortion and Fig. 13 shows the balance operation of all sharing inductors. It is clear that each inductor carries one third of the main current. A detail of one of these currents is shown in Fig. 13b. The output current is regulated by changing ma presenting a linear dependency. The current of the sharing inductors remains under balance at different values of ma and the block diagram of the proposed MCSI is shown in fig.14.
  12. 12. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 285 Figure 14: Basic Block Diagram of the Proposed Inverter 4. CONCLUSION A novel modular single rating inductor MCSI topology was analyzed in this paper. The behavior of a seven level, three modules,with fuzzy logic control arrangement was simulated showing excellent conditions of load regulation, linearity and dynamic response. As a result of circuit topology and PSC-SPWM utilization, current balance was achieved in both main and sharing inductors, even under load and operation point changes. The switching frequency was minimized with a new state-machine approach, taking the advantage of the three different zero-states of the topology. REFERENCES [1] J. Espinoza and G. Joos, “On-line generation of gating signals for current source converter topologies,” in Proc. IEEE ISIE, Budapest, Hungary, 1993, pp. 674–678. [2] N. Binesh and B. Wu, “5-level parallel current source inverter for high power application with DC current balance control,” in Proc. IEEE IEMDC, May 15–18, 2011, pp. 504–509. [3] Z. Bai, Z. Zhang, and Y. Zhang, “A generalized three-phase multilevel current source inverter with carrier phase-shifted SPWM,” in Proc. IEEE PESC, Jun. 17–21, 2007, pp. 2055–2060. [4] Y. Xiong, D. Chen, X. Yang, C. Hu, and Z. Zhang, “Analysis and experimentation of a new three-phase multilevel current-source inverter,” in Proc. 35th IEEE PESC, Jun. 20–25, 2004, vol. 1, pp. 548–551. [5] M. Aguirre, L. Calviño, and M. I. Valla, “Fault tolerant multilevel current source inverter,” in Proc. IEEE ICIT, Mar. 14–17, 2010, pp. 1345–1350 [6] B. Dupczak, A. Perin, and M. Heldwein, “Space vector modulation strategy applied to interphase transformers-based five-level current source inverters,” IEEE Trans. Power Electron., 2012, to be published. [7] X. Wang and B.-T. Ooi, “Unity PF current-source rectifier based on dynamic trilogic PWM,” IEEE Trans. Power Electron., vol. 8, no. 3, pp. 288– 294, Jul. 1993. Multilevel Inverter Topology Survey
  13. 13. International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 – 6545(Print), ISSN 0976 – 6553(Online) Volume 4, Issue 4, July-August (2013), © IAEME 286 [8] ”Multilevel Inverter Topology Survey” Master of Science Thesis in Electric Power Engineering ANDREAS NORDVALL Department of Energy and Environment Division of Electric Power Engineering CHALMERS UNIVERSITY OF TECHNOLOGY Göteborg, Sweden, 2011. [9] Five-level parallel current source converter for high power drives with DC current balance control andsuperior harmonic performance By Navid BineshBachelor of Science, University of Tehran, Tehran, Iran, 2008., [10] Miguel Pablo Aguirre, Laura Calvino, and María Inés Valla, “Multilevel Current-Source Inverter With FPGA Control” IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 60, NO. 1, JANUARY 2013. [11] H. Bilgin and M. Ermis, “Design and implementation of a current-sourceconverter for use in industry applications of D-STATCOM,” IEEE Trans.Power Electron., vol. 25, no. 8, pp. 1943–1957, Aug. 2010. [12] T. Butschen, J. Zimmermann, and R. W. De Doncker, “Development of adual GCT,” in Proc. IPEC, Jun. 21–24, 2010, pp. 1934–1940. [13] Y. Li, A. Q. Huang, and K. Motto, “Series and parallel operation of theemitter turn-off (ETO) thyristor,” IEEE Trans. Ind. Appl., vol. 38, no. 3,pp. 706–712, May/Jun. 2002. [14] S. Kouro, M. Malinowski, K. Gopakumar, J. Pou, L. G. Franquelo, B.Wu,J. Rodriguez, M. A. Perez, and J. I. Leon, “Recent advances and industrialapplications of multilevel converters,” IEEE Trans. Ind. Electron., vol. 57,no. 8, pp. 2553–2580, Aug. 2010. [15] Vinesh Kapadia and Dr. Hina Chandwani, “Comparison of Modulation Techniques for Cascaded H-Bridge Type Multilevel Current Source Inverter”, International Journal of Advanced Research in Engineering & Technology (IJARET), Volume 4, Issue 2, 2013, pp. 181 - 190, ISSN Print: 0976-6480, ISSN Online: 0976-6499. [16] B.Kiran Kumar, Y.V.Sivareddy and M.Vijayakumar, “Comparative Analysis of Sine Triangle and Space Vector PWM for Cascaded Multilevel Inverters”, International Journal of Electrical Engineering & Technology (IJEET), Volume 4, Issue 2, 2013, pp. 155 - 164, ISSN Print : 0976-6545, ISSN Online: 0976-6553. [17] Dr. Hina Chandwani, Himanshu N Chaudhari and Dhaval Patel, “Analysis and Simulation of Multilevel Inverter using Multi Carrier Based PWM Control Technique”, International Journal of Electrical Engineering & Technology (IJEET), Volume 4, Issue 3, 2013, pp. 200 - 208, ISSN Print : 0976-6545, ISSN Online: 0976-6553.

×