iControl The Energy Control The automation of the power grid requires the use of SCADA systems for the local control of each facility as well as for the management of the entire network. iControl SCADA system solves these problems by allowing not only the local control of a facility, but also the management of facilities with thousands of devices and several simultaneous communications protocols. iControl is specially designed for the energy sector. This SCADA system is easy to use and conﬁgure, and allows to suit needs of any company, regardless of the communication protocol, the type of RTU to connect to, or the format of the original data.Product HighlightsCommunication with key protocols Allows to switch between the Conﬁguration and Runtime(IEC60870-5-101, IEC60870-5-104, DNP3.0, Modbus) modes without disconnecting the system’s operation.IEC61850 client Ability to work both in standalone format, for the localTotal conﬁguration of the control panel, according to control of facilities, and in client / server format, forcustomer requirements. the control of energy networks.All ﬁles used are open ﬁle formats (XML, CSV, ...) Very easy to deploy and backup. Does not needUser customizable library of components installation procedure. Just copy to a PC and run it.Integration with SQL databases Multilanguage support.
Local control of the electrical facilities iControl is the solution for the local control of automated substations and generation facilities, connecting directly to the RTU, via serial channel or LAN. This SCADA system can control any type of RTUs, regardless of manufacturer, as it uses standard communication protocols (IEC61850, IEC60870-5-101/104, DNP3.0, Modbus) and system conﬁguration ﬁles based on open formats (XML, CSV, etc.) This will make easy to import information to the RTU units. In IEC61850 substations, iControl will act as data client connected to the substation network, not only to the RTU, but also to all the protection and measurement devices. It will send them commands and set points, and receive information regarding their status.Technical Speciﬁcations› Features Control of up to 32,000 signals in any type of license › Data Standalone or Client / Server architecture Conﬁguration ﬁles in open formats (XML, CSV, txt, INI,..) Control of up to 8000 RTUs Easy creation of RTU conﬁgurations and databases, Compatible with any type of RTU and device, regardless importing macros/applications of manufacturer Export data to standard formats such as CSV for later processing of data› Communications Automated backup processes Implementation of most widespread protocols: SQL databases integration available 60870-5-101/104 61850 › Stand Alone Single user SCADA system 3.0 serial Focused on both the control of electrical substations and Support for any physical media: hydro generation plants, either working as a local SCADA 232 422/485 for the whole facility or working as a HMI for the control of independent bays or positions.
Telecontrol of the Electrical GridIn many cases, it is necessary either to control a part of the network independently from the corporate SCADA, orto have an auxiliary Control Center in case of failure of the main Control Center. iControl is a low-cost softwarewhich, in its client / server version, is designed for controlling facilities networks remotely.Besides, the capability of working with ﬂoating clients allows operators to connect to the system from diﬀerentlocations, no matter where they are or the distance to the facilities and the server.› Client / Server The iControl server will be connected both to the Telecontrol network, from which will receive all data, and to the Intranet of the company. iControl clients will communicate to the server through the company Intranet. The server will facilitate information of all remote devices. Customers represent ﬂoating licenses, not tied to an speciﬁc computer, which facilitates access to information from diﬀerent places.› System Requirements 800Mhz Pentium IV XP SP3 or later operating system No installation required USB dongle protection
Smart Solutionsfor Smart Grids iRTU Substation Automation Telecontrol of Medium Voltage Networkswww.igrid-td.com C/ Marie Curie, 8-14 Contact: Parc Tecnològic Barcelona Nord email@example.com 08042 – Barcelona firstname.lastname@example.org Catalunya – Spain