Pumps for nuclear power industry

3,620 views
3,448 views

Published on

Published in: Technology, Business
1 Comment
2 Likes
Statistics
Notes
  • Get a customised B2B digital marketing solutions from VALVE SOLUTIONS. visit us and drop us your valuable enquiries for a special promotional offer.
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here
No Downloads
Views
Total views
3,620
On SlideShare
0
From Embeds
0
Number of Embeds
4
Actions
Shares
0
Downloads
92
Comments
1
Likes
2
Embeds 0
No embeds

No notes for slide

Pumps for nuclear power industry

  1. 1. PUMPS FOR NUCLEARPOWER INDUSTRY
  2. 2. CONTENTSBoiler feed pumpsBoiler feed pumps, PTA 3750 type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Boiler feed pumps, PTA 3800 type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Boiler feed pumps, PEA type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Condensate pumpsCondensate pumps, 1КsV type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Condensate pumps, 1КsVA type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Condensate pumps, Кs, 1Кs type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Nuclear power plant safety system pumpsSpray-cooling system pumps, CNSA, D type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Reactor shutdown cooling system pumps, CNA type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Reactor shutdown cooling system pumps CNR, CNSA, D type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Nuclear power plant lubrication system pumpsTurbine bearing lubrication system pumps, D, 1D type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Primary Circulation Pump bearing lubrication pumps, А1 ЗV type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Condensate and boiler feed pump bearing lubrication pumps, АS-NMSH, АS-SH type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Nuclear power plant service system pumpsHeat transfer pumps, SE type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Service system pumps, CNA type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Horizontal split case double entry pumps, type D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Centrifugal multistage segmental pumps, CNSg, 1CNSg type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Vortex pumps, VK (S) type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Centrifugal cantilever pumps, К, 1К type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Centrifugal pumps, SM type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Vacuum water-circuit pumps, VVN type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Application of Pumps at Nuclear Power Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Pumps, supplied to nuclear power stations during 2001-2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29JSC HYDROMASHSERVICEs office and warehouse location mapPumping equipment order questionnaire
  3. 3. INDUSTRIAL PUMPS OIL & GAS EQUIPMENTHMS PUMPS JSC, Livny, Russia HMS NEFTEMASH JSC, Tyumen, RussiaManufacturing of pumps for various applications Modular (packaged) oil field equipment manufacturerLIVNYNASOS JSC, Livny, RussiaManufacturing of submersible centrifugal pumps SIBNEFTEAVTOMATIKA JSC, Tyumen, Russiafor water industry Design and manufacturing of flow metering equipmentNASOSENERGOMASH JSC, Sumy, UkraineManufacturing of pumps for oil and gas industries, NIZHNEVARTOVSKREMSERVICE JSCthermal and nuclear power plants, household Nizhnevartovsk, Russiaand public utilities, and water industry Repair, upgrade and maintenance of oil field equipmentHYDROMASHSERVICE JSC, Moscow, RussiaConsolidated trade company of HMS GROUP ENGINEERINGVNIIAEN JSC, Sumy, UkraineResearch and development of pumpsfor nuclear and energy industries GIPROTYUMENNEFTEGAZ JSC, Tyumen, Russia Engineering of integrated oil and gas fieldsPROMBURVOD JSC, Minsk, Belarus developmentsManufacturing of submersible centrifugal pumpsfor water industry TOMSKGAZSTROY JSC, Tomsk, Russia Construction of oil & gas industries facilitiesDIMITROVGRADKHIMMASH JSCDimitrovgrad, Russia TREST SIBKOMPLEKTMONTAZHNALADKA JSCManufacturing of vessels, chemical equipment Tyumen, Russiaand pumps Construction of oil & gas industries facilitiesHMS HOUSEHOLD PUMPS JSC INSTITUTE ROSTOVSKY VODOKANALPROEKT JSCBavleny, Vladimir Region, Russia Rostov-on-Don, RussiaManufacturing and marketing Design of water supply systems, water drainageof household pumps systems, and hydraulic structures
  4. 4. JOINT STOCK COMPANY «HMS GROUP»is a dynamically developing holding company, having a high The pumping equipment manufactured by the Group isresearch and production potential in the field of design widely used at thermal and nuclear power plant facilities,and production of pumping and oil-and-gas equipment, already existing and those being under construction, in Russia,power units and complex hydraulic systems for power and CIS countries, Iran, Iraq, India, China, Morocco, Finland, Bulgaria.other industries, pipeline facilities, water supply and irrigation.Important business direction for HMS Group is turn key basis The product range of the equipment produced by the companyconstruction and packaged equipping for oil-and-gas industry. for water industry includes pumps of over 300 standard sizesHMS Group comprises the following plants, manufacturing for water supply, sewage, irrigation.pumps and oil-and-gas equipment, as well as engineeringand service companies. The incorporated trading company of HMS Group is «HYDROMASHSERVICE» CJSC, which supplies the equipmentBASIC BUSINESS ACTIVITIES OF JSC «HMS GROUP» manufactured by the Group’s plants and by its long-term part- ners, namely «Sumy Frunze NPO» OJSC, «Bobruisky mashine-design, production, installation and maintenance of pumping building plant» OJSC, «ENA» OJSC, «Volgogradneftemash» OJSC,equipment for various industries: «NPO ELSIB» OJSC, «Privod» OJSC, «Safronovsky EZ» OJSC,—extracting, refining and transport of oil; «ELDIN» OJSC, «PEMZ» OJSC, «VEMZ» OJSC, «ZVI» OJSC,—thermal power and nuclear power plants; «KHEMZ-IPEC» Joint-Venture CJSC, «Electromash» OJSC.—water supply, irrigation, utilities and house hold, including The sales embrace Russia and foreign markets. construction of complete pump stations, river dams, waste water pump stations; In addition to supply of pumps HYDROMASHSERVICE acts as a—steel and mining industry. general contractor/sub-contractor in construction and supply of complete plants for water system facilities, including pumpdesign and production of oil-and-gas equipment: stations, river dams, sewage purification facilities, waste water—modular packaged equipment for oilfields; pump stations. Contracts for complete plants supply include— odular packaged equipment for measuring of oil well  m various equipments and services: pumps, valves, pipes and fit- production; tings, high-and low-voltage electrical and power management—flow measuring instruments for oil and gas; systems, cabling; substations; water and sewage systems main-—service and maintenance of oil-and-gas equipment. tenance vehicles; equipment installation, pre-commissioning and commissioning; personnel training.engineering of surface facilities for oil-and-gas fields:— design and construction facilities for collection, storage, HYDROMASHSERVICE has implemented and is implementing processing and distribution of oil, gas and petrochemical a number of contracts on improvement of water supply products within oil-and-gas fields; and sewage systems in towns of Russia, Uzbekistan, Tajikistan,— onstruction of trunk and on-field pipelines for oil and gas,  c which were financed by The World Bank and The European construction of on-field surface facilities. Bank of Reconstruction and Development.
  5. 5. boiler feed pumps BOILER FEED PUMPS, PTA 3750 TYPE APPLICATION PTA 3750 type pumps and pumping units are desig- ned for supplying feed water from deaerators to steam generators of nuclear power units equipped with VVER-1000 (pressurized water) reactor and К-1000-60/3000-2 turbine . DESIGN PTA 3750 type feed pumps — centrifugal, horizontal, multistage, double case pumps with friction bearings, mechanical seals, turbine driven . PERFORMANCE CHART pump (unit) capacity, rotation speed, turbine power, head, m designation m3/h rpm kW PTА 3750-75-2 3400 635 3114 6285 PTА 3750-75-3 3750 860 3409 96034 pumps for nuclear power industry
  6. 6. boiler feed pumpsBOILER FEED PUMPS, PTA 3800 TYPEAPPLICATIONPTA 3800 type pumps (booster pumps) and pum-ping units are designed for supplying feed waterfrom deaerators to main feed pumps: PTA 3750-75-2and PTA 3750-75-3 to ensure their cavitation freeoperation .DESIGNPTA 3800 type feed pumps — centrifugal, horizon-tal, single stage, with double entry impeller, turbinedriven .PERFORMANCE CHART pump (unit) capacity, rotation speed, turbine power, head, m designation m3/h rpm kW PTА 3800-20-2 3 450 134 1602 1280 PTА 3800-20-3 3 800 160 1753 1680 pumps for nuclear power industry 5
  7. 7. boiler feed pumps BOILER FEED PUMPS, PEA TYPE APPLICATION PEA type pumps and pumping units are designed for supplying feed water from deaerators to steam gen- erators of nuclear power units: — PEA 1840 — for supplying feed water from dea- erator to steam generators of nuclear power units with VVER-1200 reactors; — PEA 250 — for supplying feed water from dea- erator to steam generators of nuclear power units with VVER-91 reactors during startup and shut- down . DESIGN PEA type feed pumps — centrifugal, horizontal, multistage, double case or single case, electric motor driven . PERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V PEA 250-80-2 250 880 2973 800 6000 PEA 270-150 290 1720 2970 2000 6000 PEA 1300-185 1300 1780 4500 8000 6000 PEA 2000-90 2000 900 3000 6300 6000 PEA 1840-80 1840 910 3000 6300 10 0006 pumps for nuclear power industry
  8. 8. condensate pumpsCONDENSATE PUMPS, 1KsV TYPEAPPLICATION1KsV type condensate pumps and pumping a friction bearing . The shaft is sealed with aunits are designed for transfer of conden- double mechanical seal .sate or fresh water with temperatures up to The main (high speed) stage connects to160 °С in steam-water delivery systems of the motor via a pin coupling and rotatespower stations . synchronously at 3000 RPM . This solution makes the design very compact and light . The booster (low speed) stage is driven by aDESIGN turbine mounted in the pumped liquid flow downstream of the main stage impeller . The1КsV type condensate pumps, centrifugal, booster stage has its own supports (frictionvertical, double shaft design . bearings) integrated with hydrostatic endThe main (high speed) stage has one or two bearing . Booster impeller is mounted onimpellers mounted on the high-speed shaft the low speed (1500 rpm) shaft to ensuresupported by a rolling contact bearing and good cavitation performance of the pump .PERFORMANCE CHART pump (unit) capacity, rotation speed, max. positive motor power, voltage, head, m designation m3/h rpm suction head, m kW V 1КsV 100-100 100 100 3000 1,0 75 380 1КsV 125-71 125 71 3000 1,0 45 380 1КsV 125-140 125 140 3000 1,0 90 380 1КsV 200-130 200 130 3000 1,4 132 380 1КsV 200-220 200 220 3000 1,4 250 380/6000 1КsV 315-80 315 80 3000 1,4 110 380 1КsV 315-160 315 160 3000 1,4 250 380/6000 pumps for nuclear power industry 7
  9. 9. condensate pumps CONDENSATE PUMPS, 1KsVA TYPE APPLICATION КsVA type condensate pumps and pumping units are designed for transfer of condensate in nuclear power plants steam-water delivery systems: — КsVA 125-55 — for pumping condensate from the condenser of TPN drive turbine to main turbine condenser; — КsV 200-220-1 — for pumping Delivery Water Heater steam condensate to the Full-Flow Con- densate line at a cut-in point between PND-2 (low pressure heater) and PND-3 or the discharge manifold of the drain tank pumps; — КsVA 360-160-2 — for pumping water from SAOR tank to 1BA tank and to the inlets of 1МPEN-1 to 1МPEN-5 pumps during accidents involving loss of heat-transfer fluid; — КsVA 360-160-3 — for transferring heating steam power plants К-1000-60/3000-3 turbine feed condensate from PND-1 to the Full-Flow Con- water deaerator; densate line downstream of PND-1 of the — КsVA 650-135-5 — for pumping the separate of К-1000-60/1500-2 turbines of nuclear power units spent steam from a point downstream of TsVD with VVER-1000 reactor . This pump functions as to the Full-Flow Condensate line downstream of a drain pumping unit; the PND of К-1000-60/1500-2 turbines of nuclear — КsVA 440-200 — used in the third cooling circuit power units equipped with VVER-1000 reactor . of a nuclear power unit as a drain pump to trans- This pump functions as a drain pumping unit; fer the heating steam condensate from PND-4 — КsVA 1050-100 — first stage pump, used in the to the Full-Flow Condensate line downstream of third cooling circuit of nuclear power units to PND-4; pump full-flow condensate from turbine con- — КsVA 650-135-4 — for pumping the mixture of denser through desalination plant, Seal System SPP separate and PND-4 heating steam conden- steam condenser and PND-1 to low pressure sate from PND-4 condensate collector to nuclear direct-contact heater (PND-2);8 pumps for nuclear power industry
  10. 10. condensate pumpsCONDENSATE PUMPS, 1KsVA TYPE— КsVA 1250-250 — second stage pump, used in This pump functions as a drain pumping unit; the third cooling circuit of nuclear power plants — КсV 125-140 — for pumping desalinated feed to pump Full-Flow Condensate from PND-3 water to the aerator . direct-contact low pressure heater through PND-4 and PND-5 to the aerator; DESIGN— КsVA 630-125-2 — for pumping the heating steam condensate from PND-3 to the Full-Flow Conden- КsVA type condensate pumps — vertical, double case, sate line downstream of low pressure heaters #3 segmental, with internal case comprising rotor, sta- of К-1000-60/1500-2 turbines of nuclear power tor parts, end seals (mechanical and packing type), units with VVER-1000 reactor . bearings . The pump has electric motor drive .PERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V КsVA 125-55 75 55 3000 22 380 КsV 125-140 75 110 2950 62 380 КsV 200-220-1 200 220 3000 250 6000 КsVA 360-160-2 360 160 1500 250 6000 КsVA 360-160-3 360 160 1500 250 6000 КsVA 440-200 582 146 1500 250 6000 КsVA 650-135-4 582 146 1500 400 10 000 КsVA 650-135-5 650 135 1500 400 6000 КsVA 1050-100 1 050 100 1500 500 6000/10000 КsVA 1250-250 1 250 250 1500 1250 6000/10000 КsVA 630-125-2 630 125 1500 315 6000 pumps for nuclear power industry 9
  11. 11. condensate pumps CONDENSATE PUMPS, Ks, 1Ks TYPE APPLICATION Ks, 1Ks type condensate pumps and pumping units are designed for pumping condensate in steam -water delivery systems of thermal and nuclear power plants and also in heat supply and water supply systems . — Кs 50-110 — for pumping water drained from steam generators into the drain tank to the blowdown water treatment system; — Кs 32-150-3 — for pumping condensate from the condensate tank to the II circuit make-up water deaerator; — Кs 50-55-3, Кs 80-155-3 — for pumping water, drained from steam generators . DESIGN Кs, 1Кs type condensate pumps — horizontal, single mechanical or packing type end seals, the rotor case, segmental pumps with single entry impeller, is supported by rolling contact bearings . electric motor drive . The pumps are equipped with PERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V Ks 32-150-3 32 150 3000 22 380 Ks 50-55-3 40 60 3000 15 38010 pumps for nuclear power industry
  12. 12. condensate pumpsCONDENSATE PUMPS, Ks, 1Ks TYPE pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V Ks 50-110-3 40 117 3000 30 380 Ks 50-110-4 50 110 3000 30 380 Ks 80-155-3 80 155 3000 55 380 1Ks 20-50 20 50 3000 7,5 380 1Ks 20-110 20 110 3000 15 380 1Ks 32-150 32 150 3000 30 380 1Ks 50-55 50 55 3000 15 380 1Ks 50-110 50 110 3000 30 380 1Ks 80-100 80 100 3000 45 380 1Ks 80-155 80 155 3000 75 380 pumps for nuclear power industry 11
  13. 13. nuclear power plant safety system pumps SPRAY-COOLING SYSTEM PUMPS, CNSA, D TYPE APPLICATION CNSA and D type pumps and pumping units are designed for supplying boric acid solution to sprin- kler system spray nozzles during accidents at nuclear power stations: — CNSA 750-140-1 — for pumping boric acid solu- tion to sprinkler nozzles during accidents invol- ving leaks in the primary cooling circuit or leaks in the secondary cooling circuit within the con- tainment shell so as to reduce temperature and pressure inside the shell and bind radioactive CNSA iodine, contained in the steam and air of the sealed space; — 1D630-90К — for circulation of coolant in cooling double case, multistage with screw-type first stage, circuits . mechanical seals, electric motor drive . D type feed pumps — horizontal, single stage, DESIGN with double entry impeller, mechanical seals, support / end-thrust type bearings and electric CNSA type feed pumps — centrifugal, horizontal, motor drive . PERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V CNSA 750-140-1 765 146 1500 500 6000 1D630-90К 630 90 1500 250/315 380/6000/10000 8NDv-H 500 38 1000 110 38012 pumps for nuclear power industry
  14. 14. nuclear power plant safety system pumpsREACTOR SHUTDOWN COOLING SYSTEM PUMPS, CNA TYPEAPPLICATIONCNA type reactor shutdown cooling down pumpsand pumping units are designed for cooling downreactor core during accidents and scheduled shut-down of reactor:— CNA 150-60 — for pumping boric acid (Н3ВO3) solution to nuclear reactor during accidents at power plants with VVER-91 nuclear power units;— CN 150-60-1 — for pumping boric acid (Н3ВO3) solution to nuclear reactor during accidents to replenish the lost coolant in the primary cooling circuit and for removing excess heat from the core in slow pipeline leak situations so as to keep the core sub-critical; DESIGN— CNA 150-110-2 — for pumping boric acid solu- tion from emergency tank to the primary cooling CNA type reactor shutdown cooling system pumps circuit of a VVER-1000 nuclear power unit during — horizontal, double case, segmental pumps with accidents . double case, friction bearings, face-type end seals .PERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V CNА 150-60 150 650 3000 630 6000 CN 150-60-1 153 708 3000 630 6000 CNА 150-110-2 150 980 3000 800 6000 pumps for nuclear power industry 13
  15. 15. nuclear power plant safety system pumps REACTOR SHUTDOWN COOLING SYSTEM PUMPS, TSNR, TSNSA, D TYPE APPLICATION CNR, CNSA type reactor shutdown cooling pumps so as to replenish the lost coolant and remove and pumping units are designed for cooling down excess heat from the core, for supplying solu- reactor core during accidents and scheduled shut- tions of chemicals so as to bind radioactive down of reactor: iodine during accidents involving leaks; — CNR 800-230-1 — for pumping boric acid solution — 1D630-90К — for circulating coolant in cooling to the primary cooling circuit so as to remove circuits . excess heat from the core; — CNSA 750-140а-1 — for cooling down the reac- DESIGN tor system after reactor shutdown in all operating CNR, D type pumps — horizontal, single stage, with modes of the nuclear power unit, for circulating the boronized water in the swimming pool so double entry impeller, mechanical seals, support as to remove residual heat from nuclear fuel in /end-thrust type bearings and electric motor drive . all operating modes of nuclear power unit, for CNSA type pumps — centrifugal, horizontal, double pumping boric acid solution to the primary cool- case, multistage with screw-type first stage, mecha- ing circuit during all accidents involving leaks nical seals, electric motor drive . PERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V CNR 800-230-1 800 230 3000 800 6000 CNSA 750-140а-1 816 156 1500 630 6000 1D630-90К 630 90 1500 250/315 380/6000/10000 8NDv-H 500 38 1000 110 38014 pumps for nuclear power industry
  16. 16. nuclear power plant safety system pumpsREACTOR SHUTDOWN COOLING SYSTEM PUMPS, CNR, CNSA, D TYPE CNSA D CNR pumps for nuclear power industry 15
  17. 17. nuclear power plant lubrication system pumps TURBINE BEARING LUBRICATION SYSTEM PUMPS, D, 1D TYPE APPLICATION Type D centrifugal double entry pumps and pump- ing units are designed for transfer of water and other liquids having similar viscosity (up to 36 x10 -6 m2/s) and chemical reactivity, with temperatures from 274 - 358К (1 - 85 °С), containing not more than 0 .05% by weight of solid particles, with no particles larger than 0 .2 mm and no particles with microhardness more than 6 .5 GPa (650 kgf/mm2) . — D320-50 (6NDv) — for lubricating the bearings of К-220-44 turbine at VVER-440 nuclear power plants — 1D800-56 — for lubricating the bearings of К-500-65 /3000-2 turbine at RBMK-1000 nuclear power plants DESIGN D, 1D type pumps — centrifugal, horizontal, single stage, with double entry semi-volute inlet and volute outlet . PERFORMANCE CHART * pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V D320-50 (6NDv) 320 50 1500 75 380 1D800-56 800 56 1500 200 380 / 660 / 6000 * On customer request we may select and/or fabricate pumps having different performance characteristics16 pumps for nuclear power industry
  18. 18. nuclear power plant lubrication system pumpsPRIMARY CIRCULATION PUMPBEARING LUBRICATION SYSTEM PUMPS, А1 ЗV TYPEAPPLICATIONType А1 ЗV three-screw pumps are designed fortransfer of non-aggressive liquids with lubricatingproperties, not containing abrasive particulates,with up to 1500 cSt viscosity and up to 100 °С tempe-rature (we can customize the pump to temperaturesup to 150°С) . The lower viscosity limit is determinedby lubricating properties of the liquid and the upper— by the power of electric drive and intake capacityof the pump .— А1 ЗV 8/25-11/1 ОB, АS-З 8/25-11/10А — for lu- bricating Primary Circulation Pump bearings at RBMK-1000 nuclear power plants— А1 ЗV 125/16-90/4B — for lubricating Primary Circulation Pump bearings at VVER-1000 nuclear power plants— А1 ЗV 63/25-45/6,ЗB — for lubricating Primary Circulation Pump bearings at VVER-440 nuclear power plantsPERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V А1 3V 8/25-11/10b 12,5 100 3000 7,5 220/380 АС-3V 8/25-11/10a 12,5 100 3000 7,5 220/380 А1 3V 125/16-90/4b 80 40 1500 22 380 А1 3V 63/25-45/6,3b 45 63 1500 22 380 pumps for nuclear power industry 17
  19. 19. nuclear power plant lubrication system pumps CONDENSATE AND BOILER FEED PUMP BEARING LUBRICATION SYSTEM PUMPS, АS-NMSH, AS-SH TYPE APPLICATION АS-NMSH, АS-SH type pumps are used in the feed and condensate pump bearing lubrication systems and designed to pump liquids with lubricating properties, containing no mechanical particles and non-corrosive to pump parts . The viscosity of the pumped liquids is from 0,018x10-4 -22,00x10-4 m2/s, temperature — up to +70 °С ( we can customize the pump to temperatures up to 150 °С) . DESIGN АS-NMSH and АS-SH are designed as positive-dis- placement type pumps . The pumping is performed (atmospheric and suction) the liquid flows into cavi- by gears . When gears rotate, a vacuum is created on ties between gear teeth and then is moved to the the suction side and due to the pressure difference discharge side and expelled into the discharge outlet . PERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V АS-NMSH 2-40-1,6/16А 1,6 160 1500 2,2 220/380 АS-NMSH 5-25-4,0/4А 4 40 1500 1,5 220/380 АS-NMSH 8-25-6,3/2,5А 6,3 25 1500 1,5 220/380 АS-NMSH 8-25-6,3/25А 6,3 250 1500 7,5 220/380 АS-SH 40-4-19,5/4А 19,5 40 1000 5,5 220/380 АS-SH 80-2,5-37,5/2,5А 37,5 25 1000 15 220/38018 pumps for nuclear power industry
  20. 20. nuclear power plant support system pumpsHEAT TRANSFER PUMPS, SE TYPEAPPLICATIONSE type main- line pumps and pumping units aredesigned for pumping water in heat supply networks .DESIGNCentrifugal, horizontal, volute, two stage, withdouble entry impellers and electric motor drive .Rotor is supported by friction bearings or rollingcontact bearings with ring lubrication .Seals — mechanical or packing .PERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V SE 1250-140-11 1250 140 1500 630 6000 pumps for nuclear power industry 19
  21. 21. nuclear power plant support system pumps SERVICE SYSTEM PUMPS, CNA TYPE APPLICATION CNA type service system pumps and pumping units are designed for pumping various liquids in the pro- cess systems of the I and II circuits of nuclear power plants: — CNA 1400-12 — for raising the pressure of cooling water before it enters generator gas coolers; — CNA 1700-35 — for pumping desalinated water in the intermediate circuit; — CNA 4000-95/8 — part of Essential Service and Component (in all operating modes of the nuclear unit, including emergency mode) Cooling System equipment . ACNA 1700-35 pump at Tienvan nuclear power station DESIGN Centrifugal, horizontal, single stage, with double entry impeller, friction bearings, mechanical seals . PERFORMANCE CHART pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V CNA 1400-12 1 400 12 750 75 380 CNA 1700-35 1 700 35 1500 250 6000 CNA 4000-95/8 3 600 55 750 630 600020 pumps for nuclear power industry
  22. 22. nuclear power plant support system pumpsSERVICE SYSTEM PUMPS, CNA TYPEAPPLICATIONCentrifugal, horizontal, one-, two- and three-stage,rolling contact bearings, face type end seals .PERFORMANCE CHART * pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V CNA 6,3/50 6,3 50 2900 5,5 380 CNA 12,5/50 12,5 50 2900 7,5 380 CNA 12,5/75 12,5 75 2900 11 380 CNA 25/52 25 52 2900 11 380 CNA 25/70 25 70 2900 15 380 CNA 50/20 50 20 2900 5,5 380 CNA 65/90 65 90 2900 37 380 CNA 72/54 72 54 2900 30 380 CNA 100/50 100 50 2900 22 380 CNA 110/75 110 75 2900 55 380 CNA 400/30 400 30 2900 75 380* On customer request we may select and/or fabricate pumps having different performance characteristics pumps for nuclear power industry 21
  23. 23. nuclear power plant support system pumps HORIZONTAL SPLIT CASE DOUBLE ENTRY PUMPS, D TYPE APPLICATION D type pumps and pumping units are designed for pumping water in water supply systems . — АD 3200-75-3 — for supplying circulation water to ejectors and maintaining required flow rate . — АD 960-35, АD 1800-31,5 — for pumping Inter- mediate Circuit cooling water through heat exchangers . — 1D250-125а, 1D630-90 — for circulating industrial water in cooling circuit systems, also for use in hot and cold water supply systems, fire fighting systems, etc . DESIGN Centrifugal, horizontal, double entry, electric motor drive . PERFORMANCE CHART * pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V АD 3200-75-3 2500 42 750 400 6000 АD 960-35 960 37 1465 132 380 АD 1800-31,5 2 000 33 1485 250 6000 1D 250-125а 240 101 2900 110 220 / 380 / 660 1D 630-90 630 90 1450 230 220 / 380 / 660 * On customer request we may select and/or fabricate pumps having different performance characteristics22 pumps for nuclear power industry
  24. 24. nuclear power plant support system pumpsCENTRIFUGAL MULTISTAGE SEGMENTAL PUMPS, CNSg, 1CNSg TYPEAPPLICATIONCNSg type pumps and pumping units are designedfor pumping feed water to low-power steam boilersand also for use in hot water supply systems andheating systems .DESIGNCNSg type pumps — centrifugal, multistage, seg-mental, horizontal, with single-entry compensatedimpellers .A superposed screw (version 1CNSg-1) improvespump cavitation performance . In the multistagepumps the flow is moved sequentially by severalimpellers mounted on the same shaft . Multistagedesign allows increasing or decreasing the headwithout changing the discharge .PERFORMANCE CHART * pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V CNS 38-220 38 233 2940 55 380 1CNSg 60-132-1 60 132 2950 45 380* On customer request we may select and/or fabricate pumps having different performance characteristics pumps for nuclear power industry 23
  25. 25. nuclear power plant support system pumps VORTEX PUMPS, VK, VKS TYPE APPLICATION VК, VКS type pumps and pumping units are designed for radioactive fluid and other applications in reactor compartment support systems, for use in chemical water treatment systems, heating and ventilation sys- tems, at sewage disposal plants, in water supply and sewage systems . DESIGN VК, VKS type pumps — vortex, single stage, horizontal, cantilever, self-priming . The case and cover are designed so that they form a working The liquid is moved and accelerated through this chamber for the flowing liquid . This chamber is in ring-shaped channel by an impeller (disk with radial the form of a ring connected with upstream and blades) . downstream ends of the pump . The pump is actuated by an electric motor via a coupling . PERFORMANCE CHART * pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V VК 1/16B 3,6 16 1450 1,5 220 / 380 / 660 VKS 1/16B, VKS 1/16К 3,6 16 1450 1,5 220 / 380 / 660 АS-VKS 1/16 3,6 16 1450 1,5 220 / 380 / 660 VК 2/26b 7,2 26 1450 5,5 220 / 380 / 660 VKS 2/26b 7,2 26 1450 5,5 220 / 380 / 660 АS-VKS 2/26 7,2 26 1450 5,5 220 / 380 / 660 * On customer request we may select and/or fabricate pumps having different performance characteristics24 pumps for nuclear power industry
  26. 26. nuclear power plant support system pumpsCENTRIFUGAL CANTILEVER PUMPS, К, 1К TYPEAPPLICATIONК, 1К type pumps and pumping units are designedfor circulating industrial water in cooling systems,also for use in hot and cold water supply systems,fire fighting systems, etc .DESIGNК, 1К type pumps — centrifugal, horizontal,cantilever, with packing or mechanical (single ordouble) seal .PERFORMANCE CHART * pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V К 20/30 20 30 2900 4,0 220 / 380 1К80-50-200а 45 50 2900 15 220 / 380 1К100-65-250 100 80 2900 45 220 / 380 1К100-65-250b 80 60 2900 30 220 / 380* On customer request we may select and/or fabricate pumps having different performance characteristics pumps for nuclear power industry 25
  27. 27. nuclear power plant support system pumps CENTRIFUGAL PUMPS, SM TYPE APPLICATION SМ type pumps and pumping units are designed for transferring liquids in chemical water treatment sys- tems, heating and ventilation systems, at sewage dis- posal plants, in water supply and sewage systems, etc . DESIGN SМ type pumps — centrifugal, horizontal, cantilever, with gland packing . PERFORMANCE CHART * pump (unit) capacity, rotation speed, motor power, voltage, head, m designation m3/h rpm kW V SM 80-50-200-4 25 12,5 1450 4,0 220 / 380 / 660 SM 80-50-200b-4 20 7,5 1450 3,0 220 / 380 / 660 SM 100-65-200-4 50 12,5 1450 5,5 220 / 380 / 660 SM 100-65-250-4 50 20 1450 7,5 220 / 380 / 660 * On customer request we may select and/or fabricate pumps having different performance characteristics26 pumps for nuclear power industry
  28. 28. nuclear power plant support system pumpsVACUUM WATER-CIRCUIT PUMPS, VVN TYPEAPPLICATIONVVN 1-0,75 type pumps and pumping units aredesigned for pumping air, chemically inert gasses,steam and gas mixtures and for creating vacuum inpumps and other hermetically sealed equipment .DESIGNVVN 1-0,75 type pump — vacuum, water-circuit,with gland packing .PERFORMANCE CHART nominal capacity max. reduction *pump (unit) at 0,04 MPa, in nominal capacity rotation motor power, voltage, designation m 3/s (m 3/min) at 0,02 MPa speed, rpm kW V suction pressure suction pressure, % VVN 1-0,75 20 30 2900 2,2 220 / 380* On customer request we may select and/or fabricate pumps having different performance characteristics pumps for nuclear power industry 27
  29. 29. application of pumps at nuclear power station diagram APPLICATION OF PUMPS AT NUCLEAR POWER STATION DIAGRAMM 30 7 5 29 6 1 31 2 32 3 4 18 28 9 22 8 27 10 21 11 26 16 24 15 23 17 20 12 25 14 13 1928 pumps for nuclear power industry
  30. 30. application of pumps at nuclear power station diagramCONVENTIONAL SIGNS - pumps supplied by HMS GROUP1 - water-cooled reactor 16 - electric feed pump2 - primary circulation pump 17 - emergency electric feed pump3 - circulation pipeline 18 - high pressure heaters4 - steam generator 19 - make-up water pump5 - turbine high pressure cylinder 20 - primary circuit make-up water deaerator6 - separator-reheater 21 - deaerator water filter7 - turbine low pressure cylinder 22 - heat exchangers of primary circuit filters8 - industrial water pump 23 - emergency core cooling pump (low pressure)9 - turbine condenser 24 - emergency boron injection pump (high pressure)10 - condensate pump 25 - spray pump11 - condensate treatment 26 - emergency boric acid solution tank12 - low pressure heater 27 - emergency core cooling heat exchanger13 - drain pump, low pressure heater (PND), 28 - primary circuit water containment pit second and third stage 29 - emergency boric acid solution container14 - drain pump, GShD, fourth and fifth high 30 - volume equalizer pressure stage 31 - main shutoff valve15 - deaerator 32 - main circulation loop of the reactor *PUMPS , SUPPLIED BY HMS GROUP FROM 2001-2008— Tienvan nuclear power station (China) - 46 — Kaiga nuclear power station (India) - 4— Kudankulam nuclear power station (India) - 56 — Beloyarskaya nuclear power station (Russia) - 38— Bushehr nuclear power station (Iran) - 16 — Rostovskaya nuclear power station (Russia) - 19* Number of pumps per power unit pumps for nuclear power industry 29
  31. 31. JSC HYDROMASHSERVICEs office and warehouse location mapMOSCOW JSC HYDROMASHSERVICEs head office location map JSC HYDROMASHSERVICEs head office location map JSC HYDROMASHSERVICEs warehouse location map JSC HYDROMASHSERVICEs warehouse location map 3 Pryadilnaya St., 6 A, Moscow 3 Pryadilnaya St., 6 A, Moscow Gogol St., 19, Tomilino town, Moscow regionGogol St., 19, Tomilino town, Moscow region Ryazan Ryazan y MKAD y MKAD Egoryevsk Egoryevsk hwa hwa Lytkarino Lytkarino e hig e hig railway railway ovsko ov sko a a Nikitinskay Nikitinskay holk holk Ryazanskoe highway Ryazanskoe highway TOMILINO TOMILINO Shc Shc 3 Pry 3 Pry adiln adiln aya s aya s tr tr vaya vaya 1 st. Parko 1 st. Parko Схема проезда в офисstr omayskaya ЗАО «ГИДРОМАШСЕРВИС» str Схема проезда на склад ЗАО «ГИДРОМАШСЕРВИС» Perv Pervomayskaya Lyubercy Lyubercy Московская обл., пос. Томилино, ул. Гоголя, д. 19, складMKAD MKAD 1 1 2 2 г. Москва, ул. 3 я Прядильная, 6 А 2 METRO METRO MOSCOW MOSCOW Volgogradsky avenue Volgogradsky avenue
  32. 32. to draw up a purchase order, please fill and send us the following questionnairePUMPING EQUIPMENT ORDER QUESTIONNAIRE105037, 3 Pryadilnaya St ., 6A, Moscow, Russia Ph .: +7 (495) 730 0212 Fax: +7 (495) 730 0236 e-mail: hydro@hms .ru www .hms .ruDesigner organization, address:__________________________________________________________________________Buyer: _________________________________________________________________________________________________Name of nuclear power station, description of the service system: __________________________________________________________________________________________________________________________________________________Equipment installation place: ____________________________________________________________________________Quantity, equipment delivery date: _______________________________________________________________________Designation of the analogous unit: _______________________________________________________________________ № PARAMETER (SPECIFICATION) UNITS CUSTOMER REQUIREMENTS 1 PERFORMANCE 1 .1 capacity m3/hr 1 .2 head m 1 .3 power consumption kW 1 .4 Net positive suction head m 1 .5 intake pressure kgf/cm 2 1 .6 operating mode (continuous, periodic) * — 2 PUMPED MEDIUM 2 .1 volumetric percentage of solid particles % 2 .2 solid particle size мм о 2 .3 operating and design temperature, tp С 2 .4 density at tp kg/m3 2 .5 viscosity (kinematic) at tp cSt (m2/s) 2 .6 pH value pH 2 .7 radioactivity Ku/l 2 .8 chloride ion concentration ml g/l* Normal Operating Conditions and during deviations from Normal Operating Conditions
  33. 33. 3 SHAFT SEAL 3 .1 type (single or double, packing or mechanical) 3 .2 sealing liquid 4 UNIT INSTALLATION CONDITIONS type of atmosphere during operation, storage 4 .1 and transportation as specified in GOST 15150 climatic modification and installation category 4 .2 as specified in GOST 15150 4 .3 safety class as specified in OPB 88/97 * 4 .4 equipment group as specified in PNAE G -7-008-89 ** 4 .5 aseismic class as specified in NP-031-01 4 .6 quality class 5 ACTUATOR (ELECTRIC MOTOR) SPECIFICATIONS 5 .1 type — 5 .2 rotation speed rpm 5 .3 power rating kW 5 .4 power line frequency Hz 5 .5 supply voltage V 6 APPENDIX: installation diagram, other requirementsFilled by: Position:Address:Phone: Fax:* General Safety Rules at Nuclear Power Plants . ** Nuclear Power Industry Norms and Rules
  34. 34. e-mail: hydro@hms.ru6A, Pryadilnaya st. Phone: + 7 (495) 730 02 12 www.grouphms.ruMoscow, 105037, Russia Fax: + 7 (495) 730 02 36 www.hms.ru

×