Adroitt Flow Control Product Catalogue

1,053
-1

Published on

Published in: Business
1 Comment
0 Likes
Statistics
Notes
  • Are you looking for genuine quality leads online ? Get customised B2B digital marketing solutions from us tailored for the Oil and Gas, Energy, Petrochemical Industry. Contact us today.
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here
  • Be the first to like this

No Downloads
Views
Total Views
1,053
On Slideshare
0
From Embeds
0
Number of Embeds
4
Actions
Shares
0
Downloads
0
Comments
1
Likes
0
Embeds 0
No embeds

No notes for slide

Adroitt Flow Control Product Catalogue

  1. 1. Bran+Luebbe is worldwide leader in metering, analyzing and processing liquids with expertise for more than 75years. The namestands for high quality and precision, as one of the most reputable manufacturers of metering and process pumps and processsystems. Bran+Luebbe extensive line of metering pumps, process pumps, process systems and chemical injection systems caterto Oil & Gas, Petrochemical, Chemical, Pulp & Paper, Personal Care, Food & Beverage, Pharmaceutical, Water Treatment Industrysectors. PROCAM METERING PUMP: ♦ Modular, Single and Multi-Stream Pump Configuration ♦ Double Diaphragm & Plunger Pumps ♦ Pressure upto 20bar & Flow rates upto 3000 LPH per pumphead for diaphragm pump ♦ ProCam Smart, a high quality, economic pump for less demanding applications ♦ ProCam Sanitary Diaphragm Metering Pumps available with CIP & SIP facility ♦ ProCam Plunger metering pumps are ideal for applications with operating pressures upto 80bar and flow rates from 0.16 to 60.5 LPH. NOVADOS METERING PUMP: ♦ Horizontal & Vertical Metering Pump ♦ Modular, Single and Multi-Stream Pump Configuration to suit process requirement ♦ Pressures upto 1000 bar / 15000 psi ♦ Flow Rates upto 22600 LPH / 6000 GPH ♦ Variable Speed Drive & Stroke Adjustment for manual & automatic flow control ♦ Double Diaphragm & Plunger Pumps, API675 compliant, ♦ Remote Condition Monitoring with NOVALINK-CSM online diagnostic system NOVAPLEX PROCESS PUMP: ♦ Reciprocating high performance diaphragm process pumps ♦ Ideally suited for high pressure and high capacity applications ♦ Modular design, additions can be added on expansion ♦ Pumping chamber hermetically sealed ♦ Pressures upto 1000 bar / 15000 psi & Flow rates upto 80 m3/hr / 21000 GPH ♦ Hydraulic power upto 260kw with variable speed control option ♦ Remote Condition Monitoring with NOVALINK-CSM online diagnostic system CHEMICAL INJECTION UNITS: ♦ Basic Injection Package → Single Chemical / Single Injection Point → Compact & Simple Design ♦ Multi-Pump Head Package → Multi-pump head injection & storage package → High Volume / High Pressure / High Temperature applications → Continuous or Batch applications → Designed suitable for hazardous area installations & hostile environments → Custom designed, built and fully tested ♦ Multi-Point Chemical Injection Package → Multi-compartment storage volume with different chemicals → Horizontal modular duty/standby multi-headed pumps ♦ Vertical Multi-Pumphead Package → Patented vertical modular pump configuration → Self-contained storage and injection package www.adroittflowcontrol.com
  2. 2. Copes-Vulcan is recognized worldwide as a leader in valves and steam conditioning equipments for severe and critical serviceapplications. Copes-Vulcan is at the forefront of developing today’s critical valves and equipments with over 90 years of experiencein the global power generation business. Copes-Vulcan has been supplying equipments to Power, Refinery, Oil & Gas, Pulp & Paper,Petrochemical, Nuclear industry segments. SPECIAL APPLICATION GLOBE & ANGLE CONTROL VALVES: • General Service Applications • Severe Duty Applications • High Turn-Down Ratio • Available in size 0.75” to 24”, ANSI 150 to 4500 Class • Special ANSI and API ratings available • Meets ASTM/ASME Standards • Buttweld / Socketweld / Flanged & Hub connections VALVE TRIM TYPES: • 13 types of trims to meet various general service to severe duty applications • RAVEN - Multi-Stage, Anti-Cavitation, Velocity & Noise Control Trim • HUSH trim • CAV-B9 • One-Stage HUSH • Soft Seat, Metal Seat Design and special treatment metallurgy available • Quick-Replace, Drop-In-Place trim designs assists in reducing maintenance time DESUPERHEATERS: • 7 types of designs available to meet various applications • Variable Orifice, Turndown 100:1, Size 2” & above, ANSI 150 to 2500 • Variable Annulas, Turndown 15:1, Size 1” to 16”, ANSI 150 to 600 • Multi-Nozzle, Turndown 75:1, Size 3/2, 3/3, 3/5, 4/5 (based on linesize), ANSI 150-2500 • Integral cooling water function available • Meets ASTM / ASME standards • Coolant Shut-off Class III to V (depending on process condition & selected equipment) PRDS (Pressure Reducing & Desuperheating Station): • Top Entry & Standard Design configuration available • Turndown 50:1, Size 1x2”, 2x4”, 3x6”, 4x8” & 6x12”, ANSI 150 to 2500 • Valve Body compliant to ASME B16.34 & Bonnet Closure to Sec. VIII of ASME Code. • Top Entry design allows access to valve internals from bonnet for quick maintenance • Comprehensive range of trims can be fitted to meet process requirements • Varied range of actuator and accessories options available TURBINE BYPASS (HP / LP) SYSTEM: • Contract specific design fully accommodate performance requirement • Equipped with multi-stage pressure profiling trim for active velocity & noise control • Forged body designs upto Class 4500 with intermediate & split ratings being available • Bolted or Pressure Seal bonnets • Trim removable inline through bonnet connection • Integral, adjustable condensate drain and warming valve options available • Shut-Off upto ANSI/FCI 70-2 Class V • Double Acting Piston Actuator, Hydraulic Power Unit, Self-Contained Electro-Hydraulic actuator options are available to achieve speed of response & stroke length. www.adroittflowcontrol.com
  3. 3. Erreesse S.r.l, Italy, started with manufacturing & supply of industrial ball valves in Yr 2004 and rapidly built an excellent reputationin the international market for its quality products. Thanks to the Quality System certified to ISO 9001:2000 by TUV and productscertifications to PED and ATEX, Erreessel Srl are able to supply their products to all the markets where there are requirement ofvalves such as : Oil & Gas production (both off-shore and on-shore), Oil & Gas Distribution (pipelines), Refineries & Process Plants,Chemical, Petrochemical, Energy, Food & Beverage & other industry sectors. FLOATING BALL VALVES : • Side Entry Design • Full Bore and Reduced Bore Design • Sizes : 1/4” to 8” in ANSI 150 & ANSI 300 • Sizes : 1/4” to 6” in ANSI 600 • Sizes : 1/4” to 2” in ANSI 900, ANSI 1500 and ANSI 2500 • Top Entry Design • Full Bore and Reduced Bore Design • Sizes : 1/4” to 3” in ANSI 150, ANSI 300 and ANSI 600 • Sizes : 1/4” 2” in ANSI 900, ANSI 1500 and ANSI 2500 • End Connections : RF, RFS, RTJ, HUB, BW, Threaded, SW TRUNNION MOUNTED BALL VALVES : • Side Entry Design • Full Bore and Reduced Bore Design • Sizes : 1/4” to 48” in ANSI 150 to ANSI 600 • Sizes : 1/4” to 36” in ANSI 900 and ANSI 1500 • Sizes : 1/4” to 24” in ANSI 2500 • Top Entry Design • Full Bore and Reduced Bore Design • Sizes : 1/4” t0 48” in ANSI 150 to ANSI 600 • Sizes : 1/4” to 36” in ANSI 900 • Sizes : 1/4” to 12” in ANSI 1500 and ANSI 2500 • End Connections : RF, RFS, RTJ, HUB, BW, Threaded, SW DOUBLE BLOCK & BLEED VALVES : • Floating & Trunnion Mounted Design • Special Valve with two balls in one body with needle bleed valve • Sizes : ½” to 4” • Available in Pressure Class ANSI 150 to ANSI 2500 • Any type of end connection is possible - RF, RFS, RTJ, BSP, NPT, HUB SPECIAL 3-WAY & 4-WAY BALL VALVES : • Trunnion Mounted Design • Flanged & Threaded End Connections • Sizes : Customized as per request. • Available in Pressure Class ANSI 150 to ANSI 2500 SPECIAL APPLICATION VALVES : • Metal to Metal Sealing for Abrasive & Dirty Service, ANSI 150 to 2500, ½”to 36” size • Metal to Metal Sealing for High Temperature Service, ANSI 150 to 2500, ½”to 36” size • Valves for Low Temperature, Blow-down, Cryogenic Service (-196 Deg.C.) Available in ANSI 150 to ANSI 2500, ½”to 36” sizes www.adroittflowcontrol.com
  4. 4. GemmeCotti has been producing pumps for acids & dangerous liquids, mixers, filters and compressors since 1992. GemmeCottipumps are widely used in different industrial fields: Chemical, Petrochemical, Power, Pharmaceutical, Oil & Gas, Water Treatment,Electronic, Electroplating and other industry sectors. MAG-DRIVE HORIZONTAL PUMPS: • Non-Metallic and Metallic Mag-Drive Centrifugal Pumps • Available Material - PP, PVDF, AISI316 • Flow - 0.2 - 50 m3/hr • Max. Head - 35 mcl • Max. Temperature - 90°C. • MAWP - 10 bar • Applications - Toxic, Corrosive, Carcinogenic liquids, Hydrocarbons, Radioactive liquids MAG-DRIVE ROTARY VANE PUMPS: • Non-Metallic Mag-Drive Vane Pumps Self-Priming • Rotary Vane Mag-Drive Pumps Dry Self-Priming • Available Material - PP, PVDF, AISI316L, Hastelloy C, Titanium • Flow - 100 - 2000 LPH, Max. Head - 12 bar • Temperature : -40° to +160° C., MAWP - 25 bar • Applications - Heat Transfer Oils, Toxic, Corrosive, Radioactive liquids, Hydrocarbons, Pyrophorics & other flammable gases, Refrigerants, Carcinogenic liquids. MAG-DRIVE TURBINE PUMPS: • Thermoplastic & Metallic Regenerative Mag-Drive Turbine Pumps (Self-Priming) • Available Material - PP, PVDF, AISI316L, Hastelloy C, Titanium • Flow - 0.2 - 8 m3/hr, Max. Head - 85 mcl, MAWP - 25 bar, • Temperature : -40° to +160° C. • Applications - Heat Transfer Oils, Toxic, Corrosive, Radioactive liquids, Hydrocarbons, Pyrophorics & other inflammables, Handles upto 20% entrained gas, resists cavitation MECHANICAL SEALED HORIZONTAL PUMPS: • Non-Metallic Mechanical Sealed Centrifugal Pump with Open Impeller • Available Material - PP, PVDF • Flow - 0.5 - 60 m3/hr, Max. Head - 38 mcl, MAWP - 6 bar, • Temperature : 0° to +90° C. • Applications - High Corrosive Liquids, Liquids with Solids VERTICAL PUMPS: • Metallic & Non-Metallic Vertical Centrifugal Pump with Open Impeller • Available Material - PP, PVDF, AISI316, Titanium • Flow - 0.2 - 55 m3/hr, Max. Head - 36 mcl, • Temperature : 0° to +160° C. • Applications - High Corrosive Liquids, Liquids with Solids, Potassium Permanganate LIQUID RING VACUUM PUMPS: • Metallic & Non-Metallic Vertical Centrifugal Pump with Open Impeller • Available Material - AISI316, AISI316L, Alloy 20, Hastelloy C, Titanium • Flow - 50 - 450 m3/hr, Max. Head - 33 mbar • Temperature : 0° to +90° C., MAWP - 10bar • Applications - High Corrosive, Toxic, Noxious, Carcinogenic Liquids, Hydrocarbons, Pyrophorics, other flammable gases www.adroittflowcontrol.com
  5. 5. The Hemiwedge Cartridge Valve is an innovative design that incorporates the positive features of ball, gate, plug and highperformance valves. The result is a mechanically sealing tight shut-off valve with a simple operation that provides outstandinglongevity and performance in a broad range of applications with virtually no maintenance. The Hemiwedge Cartridge Valve is a thru-conduit, quarter-turn, mechanically sealing design providing low emission and quick operation capabilities in critical shut-off applications. The product is developed in resilient seat as well as metal seat design for severe service applications (with particulates or high temperature). The metal seated version uses the same body and bonnet as the resilient seat design, and is factory tested to the tightest leakage criteria compliance to ISO 5208 Rate B. The Hemiwedge Cartridge Valve seals using a hemi-spherical closure member that wedges tightly against the seat to provide tight shut-off in either high or low pressure with repeatable zero leakage (resilient seated valves). The defining feature of the valve is it’s cartridge design whereby all the valve internal sealing parts are affixed to the bonnet allowing quick and easy serviceability and reducing expensive downtimeThroughout the opening and closing of the valve, the core (red) maintains it’sstationary position within the HEMI (green) which directs fluid flow straight throughthe valve with minimal impingement of the seat ring or side of the body. This results in lesserosion in the valve body and longer seat life compared to conventional ball valves, particularlywith flow streams containing scale, sand and other particulates. PRODUCT FEATURES :-INDUSTRY &APPLICATION OPPORTUNITIES :- CARTRIDGE DESIGN • Top EntryPROCESSING PIPELINE • Ease of Repair• Gas Separation Systems • Gas Separation Systems • Serialized Cartridge• Safety Shutdown Valve • Products Pipeline • Inter-changeability• Emergency Shutdown (ESD) Valve • NGL Pipeline• Dehydration Switching • Co2 pipeline MECHANICALLY SEATED• Ethylene / Butylene / Propylene Shutoff • Compressor Station Block Valves • HEMI - mechanical wedge• Sour Gas Shutoff • Overpressure Protection Valves • Bubble Tight Bi-directional shut-off• Compressor Block Valve • Scrubber Dump Valves • Low operational torque• Compressed Gas Services • Pig Launcher, Receiver & Dump Valves • Reduced Wear on Seat • Gas TransmissionPRODUCTION • Vent & Drain Valves STATIONARY CORE• Production Manifolds • Seat protected from flow• Flow Lines POWER • Linear Flow Characteristics• Enhanced Oil Recovery • Fly Ash • Reduced Turbulence• Underground Storage • Ash Slurry• Entrained Sand Shut-off • Boiler Feed Water QUARTER OPERATION• Diverter Valve • Low Pressure Steam • Reduced Emission than rising stem• NACE MR0175:2002 & 2003 • Easily automated MINING • Low Dimensional Profile • Slurry Service www.adroittflowcontrol.com
  6. 6. MILLIKEN is a full line manufacturer of Eccentric Plug, Butterfly & Check valve range of products, with their respective controls andactuators. Started with manufacturing of eccentric plug valve over two decade ago, growth has been constant with addition of newproduct range of lubricated plug valve, AWWA Butterfly Valve, General Service Butterfly Valve, Swing Check Valve, Rubber FlapperCheck Valve, wafer (outside spring) check valve, globe style check valve and compact wafer check valve. These valves are mainlyused in Industrial, HVAC, Water & Waste Water markets.Eccentric Plug Valve:MILLIKEN Eccentric Plug Valve is available in sizes ranging from ½”- 72” and is designed specificallyfor Industrial & Wastewater applications. The round port design is available in sizes ½”- 12”, offers lessresistance to slurry, sludge, and fluid flow resulting in less erosion, longer service life and reduced pumpingcosts. The round large port design can pass larger solids reducing plugging problems. Round port valveoffer better flow characteristics resulting in less pressure drop across the valve. Pressure rating on 12” andsmaller valve is 175psi, and pressure rating on 14” and larger valve is 150psi. Higher pressures are alsoavailable on request. AWWA Butterfly Valve: MILLIKEN AWWA Butterfly Valves meet the requirements of AWWA C-504 standards and are used for shut-off of clean and dirty water. The seat in body design is offered with either flanged or mechanical joint ends. The valve is available in sizes ranging from 3” to 72” (upto 48” for mechanical joint). The use of ductile iron for the valve’s body and disc translates into greater surge resistance and longer life of valve. The 20” and smaller valve comes standard with an internal and external fusion epoxy coating, and the 24” and larger valves come standard with internal & external liquid epoxy coating. On valves 24” - 72” in size the flow through disc design results in lower head-loss than solid or hollow disc designs. All valves 24” and larger have a mechanically retained rubber seat in the body that allows for easy 2way adjustment in the field without need for special tools.Check Valve:MILLIKEN Check Valve range of products include 1) CCNE Check Valve 2) Flex Check Valve and 3) Spring Loaded Check Valve.CCNE Check Valves are self-contained, free-swinging disc style with outside lever & weight or outside lever & spring. Valves conformto standards set forth in AWWA C508 & used most commonly in Oil & Gas, Water, Waste Water & Sewage applications. The valvesare available in Cast Iron Body, Bronze/SS seat rings with Bronze/Buna-N or EPDM seat inserts. The High Pressure product range isa v a i l a b l e f o r r a t e d p r e s s u r e t o 3 5 0 p s i , i n D u c t i l e I r o n B o d y, S S s e a t r i n g a n d a i r c u s h i o n s .Flex Check Valve set the standards for quality and reliability with it’s simple & innovative design. The only moving part being in discwhich features fully encapsulated steel disc with nylon reinforcement in the flex area and the molded elastomer with integral o-ringensures bubble-tight shut-off preventing backflow. The valve is rated upto 285psi. The Spring Loaded Check Valves are designed toprovide reliable performance in applications requiring non-slam closure in clear fluid. Available in Double-Disc, center guidedglobe pattern or compact wafer design, each model provides and economic solution to prevent flow reversal. www.adroittflowcontrol.com
  7. 7. With decade of experience in the design and manufacture of rotary positive displacement pumps, Plenty Mirrlees Pump has builtan excellent reputation supplying reliable pumping equipments to the oil processing, petrochemical processing, power generation,marine, defense, sugar and general industry sectors. MAGMO PUMPS: In the sugar industry, MAGMO is the most reliable pump in service. It is specifically designed for pumping massecuite and magma in the sugar processing industry. The pump features a large inlet chamber, robust bearings & strong spring mechanism to keep the scraper effective over the elliptical rotor. Operating Parameters: • Flow range : 3.7 to 50 m3/hr • Temperature : Ambient (upto 50°C max), • Pressure : upto 7 bar, Max. Viscosity : Apprx. 1000,000 cst. TWIN SCREW PUMPS: Bulk liquid transfer pumps utilising two contra rotating screws providing smooth pulsefree flow. Each screw is accurately located between bearings providing physical gap between screw set and casing thus not requiring internal lubrication from pumped liquid. Available for both horizontal and vertical configuration. Operating Parameters: • Flow range : 10 to 1000 m3/hr • Temperature : -40° to +200°C • Pressure : upto 20 bar, Max. Viscosity : Apprx. 1 to 7000 cst. TRIPLE SCREW PUMPS: This is positive displacement axial flow screw type pump with only three moving parts - a power rotor and two idler rotors. These three rotors have accurately machined threads which enfold the liquid being pumped and also act as seals. Units are available in pedestal mounted version, high pressure API614 system compliant & top mounting arrangement. Operating Parameters: • Flow range : 0.1 to 750 m3/hr • Temperature : -20° to +200°C • Pressure : upto 138 bar, Max. Viscosity : Apprx. 2 to 5000 cst. VARIABLE FLOW ROTARY VANE PUMPS: The U2000 variable flow rotary vane pump offers infinitely variable flow from 0 to 100% by varying the eccentricity of the shaft to rotor mechanism within the pump. Eccentricity can be varied manually by the handwheel at top of the pump or by remotely operated stroke actuator or Constant Pressure Control (CPC) feature for automatic flow control. Operating Parameters: • Flow range : upto 500 m3/hr • Temperature : -30° to +260°C • Pressure : upto 25 bar, Max. Viscosity : Apprx. 2 to 75,000 cst. FIXED FLOW ROTARY VANE PUMPS: The G2000/P2000 are rotary pump with unique construction of 8 blades with flat tips sliding in a precision machined rotor. The mechanism provides for low shear, low pulse flow, with high volumetric and mechanical efficiency. The design enables low or highly viscous liquids to be pumped. Heating jackets for steam or oil are available. Pumps can be supplied with internal full flow pressure relief valves or without relief valves to API676 requirements. Operating Parameters: • Flow range : upto 500 m3/hr • Temperature : -30° to +260°C • Pressure : upto 25 bar, Max. Viscosity : Apprx. 2 to 75,000 cst. www.adroittflowcontrol.com
  8. 8. Established in Yr 1978, RAMEN is a leading manufacturer of Ball Sector Valve. The design and manufacturing techniques of theRAMEN ball sector valves are based on long and diversified use in demanding applications and environments. RAMEN ball sectorvalve has proved to be advantageous for tight shut-off and throttling control of gases, liquids and slurry in moderate pressure andtemperature conditions. Industries Served : Media / Applications : • Pulp & Paper • Air & Gas such as Oxygen, Nitrogen, Argon, • Chemical Methane, Propane, Ammonia • Mineral Ore Processing Plants • Vapours & Condensate • Steel • Oils • Cement • Cellulose & Paper Pulp • Pharmaceutical • Caustic & Acid Solutions • Power & Heat Generation Plant • Iron Ore, Coal • Water & Waste Water Treatment • Lime Slurry & Fly Ash RAMEN ball sector valve is made from a half-ball sector which is journalled in the valve body with 2-shafts. One part of the ball sector is used for shut-off while other part of the sphere with diameter 80% of the valve size is used for flow path. The elliptical valve opening reduces the risk of plugging & is less subject to wear in throttling position. Salient Features :- • DN25 UPTO DN300 • Very Low Kv Values, up from 0.025 • Very High Kv Values, upto 3840 • Self-Draining • Excellent Throttling Characteristics • Good Resistance to abrasive flow • Quick Exchange of Seat Rings • Easy Maintenance • Easy to Install & Automate • Mounting Kits for ISO-actuators RAMEN ball sector valves are also available in special construction materials as an option for application specific modifications as listed below :- • For elevated temperatures or corrosive applications, RAMEN valve can be supplied with the conventional packing box or lipseal type shaft seal arrangement. • For throttling control of abrasive media, RAMEN valve can be supplied with hard faced or chrome plated or stellited ball sector surface along with seat ring and seat retainer. • For control of abrasive slurries & liquids at moderate pressure drops in iron ore & mineral processing plants, a soft rubberlined ball sector valve can be supplied which has proved to be superior than any other valves. Sizes available in DN80 TO DN200, upto 5bar pressure. www.adroittflowcontrol.com
  9. 9. SMG Valves is a wholly owned subsidiary of Southern Manufacturing Group Inc, USA. SMG line of valves includes Key Port ValveSeries 400, Permaseal Plug Valve and Chem-Plug Valve. These valve lines are purchased from DeZURIK & Mueller Steam andrepresent the combined quality of trusted brand names and commitment to quality. PERMASEAL PLUG VALVE: The Permaseal Plug Valves are designed for on-off and diverting applications in the chemical, power, mining & other industry sectors. They are designed to handle clean, viscous and corrosive liquids, clean & corrosive gases and low pressure steam. It’s unique design includes non-lubricated tapered plug and two individual seats that provides a double seal and bi-diectional shut-off. Several body designs are available for various process applications including 2-way, 3-way, jacketed, flush-through and double block & bleed valve. Permaseal Plug Valves are also available in modified design for chlorine service and bellows stem seals for controlling fugitive emissions. Available in sizes from 0.5” to 6”, they offer corrosion resistance and temperature ratings upto 1000°F (540°C). Pressure ratings include ANSI Class 150 for applications upto 285psi and ANSI Class 300 for services to 740psi. Salient Design Features: • External Seat Wear Indicator • Self Adjusting Plug • High Flow Capacity • Low Torque=Smaller Actuator CHEM-PLUG VALVE: The Chem-Plug range of valves are available in Sleeved, Fully Lined and Special Construction designs suitable for varied applications in process, chemical, pulp & paper, pharmaceutical and other industries & can eliminate multiple valving in diverting, blending and segregation piping systems. Chem-Plug sleeved and fully lined valves are available in a) Diaphragm Top-Seal & b) V-ring Top-Seal models. Chem-Plug valves are available in choice of body, plug and sleeve materials to suit almost any applications where plug valves are required. Specially modified valves can be used for severe service applications such as liquid or gaseous chlorine, oxygen, hydrofluoric acid, vacuum service or slurry applications. Special Construction Valves includes 3-way, Multi-Port Valves, Fire-Safe Valves compliant to external leakage requirement of API607, Double Block & Bleed Valve compliant to Military Spec. MIL-V-12003 Type IV, Fully Jacketed and Partially Jacketed Valves. Chem-Plug Valves are available in ANSI 150 & 300 class, conform to ANSI B16.34, API6D (short pattern) Face to Face, API603 & ANSI B16.10. KEY-PORT VALVE: The Key Port Series 400 Eccentric Valves combine proven design and quality construction to provide dependable long life for a variety of applications. The Salient Design Features include:- • Corrosion Resistant Plug (Bronze & Electroless Nickel Plated Cast Iron) • Double-Seal for tight shut-off and safety - Resilient + Metal Seat • O-ring stem seal • Corrosion Resistant bearings - permanently lubricated upper & lower bearings • Corrosion Resistant Seal - a baked on thermoplastic seat coating This valve is ideal for many applications including HVAC systems, natural gas, combined hot & chilled water service. The valve is also listed by UL for variety of applications including: manual burner shut-off of city gas, fuel oils, compressed gas line shut-off, miscellaneous valves for general use in air and water piping for fire protection equipment. www.adroittflowcontrol.com
  10. 10. Since it’s foundation in 1997, Severe Service Technology Inc, USA, has dedicated itself to the engineering and manufacture of themost rugged and durable metal seated ball valves in the industry. Over 12years of manufacturing experience, combined with over50years of engineering expertise has created a complete Isolation Valve solution to any industry’s toughest critical service. SSV - Vulcan Power Valves - are specifically designed to handle high pressure steam isolation service & applications in Power Industry. Available in different models as SSV01, SSV02, SSV03, SSV04, SSV05 and SSV06 with industry & application specific modifications, these valves are available in sizes from 0.5” to 2.5” in ANSI 1500 to ANSI 4500 pressure class only. Most common applications for this valve are :- - Boiler Feedwater Isolation - High Pressure Heaters - Feedwater Drains - IP Heaters - Boiler Drain Vents - Bypass and Fluidised Beds - Economiser Stops - Flash Tank SSG - General Service Valves - are specifically designed to handle the most critical isolation service & applications in varied industry segments. SSG valve range is from 0.5” to 24” in pressure class ANSI 150 to ANSI 2500. The valve can be built to wide array of materials for body and trim. Optional features include bi-directional flow, dual solid excluders, coating and shut-off classes upto Class VI (bubble tight). Most common applications for this valve are :- - Mining Slurry with Ceramic Trim - Heavy Oil - Ceramic Lined Valve for Iron Ore - Double Block & Bleed Valve SSS - Signature (Fugitive Emission) Valve - includes patented Triple Redundant Sealing Stem Design developed for use in lethal gas applications where safety & performance are critical. The elongated packing box eliminates possibility of leakage. These valves are available in 0.5” to 24” sizes. Optional features include bi-directional flow, dual solid excluders, coatings & Class VI shut-off class. www.adroittflowcontrol.com
  11. 11. SwissFluid AG, is specialized in design, manufacturing and worldwide marketing of a Industries Served :comprehensive line of industrial valves and piping components. SwissFluid core competence • Chemical CPI, Bio-Techis the lining of process valves & components with engineered plastics, designed for handling • Petrochemical, Fertilizercorrosive, abrasive or even pure liquid service requirements. An extensive and modular range • Semi-conductors, Pharmaof lined fluid handling products is available suitable to handle technical & application-driven • Mining, Steel, Powerservices for shut-off, throttling, flow control, process control, observing & sampling. All products • Food Processing, Beverageshave passed pressure tests as per EN12266-1, leakage rate A as well as API598. Liners and • Paint/Pigmentsencapsulations are generally spark tested at 35 kv & are in full compliance with FDA regulations. • Glue, Textile Industries Diaphragm Valves (plastomer-lined) Butterfly Valves (elastomer-lined) Size: DN15 - DN200, Flanges PN10/16, ANSI150, Size: DN40 - DN600, Flanges PN10/16, ANSI150lbs, Body/Bonnet: ASTM A216 WCB or CF8M Body/Bonnet: ASTM A216 WCB or CF8M Linings: PFA, PFA-AS (anti-static), PVDF, PolyPro Liner: EPDM, FPM, NBR, SBR, XNBR, VMQ Diaphragms: PTFE/EPDM, PTFE/FPM, EPDM Disc: PFA, PFA-AS, PVDF, Duplex, Titanium, Hastelloy C Pressure: 13mbar-16bar, Temperature: upto 150°C Pressure: upto 16bar, Temperature: upto 200°C Cylindrical Plug Valves (plastomer-lined, full port) Pneumatic Actuators Size: DN15 - DN100, Flanges PN10/16, ANSI150, QuarterTurn Rack & Pinion, DA/SA with Spring Return Body/Bonnet: ASTM A216 WCB or CF8M Body/Covers - Die Cast Aluminium Linings: PFA, PFA-AS (anti-static) NAMUR interface for Limit Switch, Solenoid ValveCylinders: PFA, PFA-AS, Duplex SS, Titanium, Hastelloy C Air Supply: Min. 1bar to Max. 10bar, Temp:Upto 80°C Pressure: 1mbar-16bar, Temperature: upto 200°C Torque: upto 3236 Nm @ 6bar Ball Valves (plastomer-lined, full port) Piping Components (plastomer-lined) Size: DN15 - DN100, Flanges PN10/16, ANSI150, Flanged Pipes, Tees, Bends, Crosses, Reducer/Spacer Body/Bonnet: ASTM A216 WCB or CF8M Size: DN15 - DN600, Flanges PN10/16/40, ANSI150lbs, Linings: PFA, PFA-AS (anti-static) Lining: PTFE, PTFE-AS, PFA, PFA-AS, PVDF, PolyPro Ball: PFA, PFA-AS, ETFE, Duplex, Titanium, Hastelloy C, All parts sandblasted and primed Pressure: 1mbar-16bar, Temperature: upto 200°C Pressure: upto 16bar, Temperature: upto 200°C Sight Glasses (plastomer-lined) Lined & Molded Parts Size: DN15 - DN150, Flanges PN10/16, ANSI150, Front plates for displacement pump, bodies for ball chk Body/Bonnet: ASTM A216 WCB or CF8M valve, diaphragm valve, sight glasses, suction hose for Linings: PFA, PFA-AS (anti-static), PVDF, PolyPro vessels and reactors, valve & pressure gauge diaphragm, Glass Plates: Borosilicate, Gasket:C-4400 asbestos free flow measuring tubes, dip pipes, solid or hollow balls Pressure: 1mbar-16bar, Temperature: upto 200°C with metal inserts Sight Glasses (stainless steel) Sampling Valves (plastomer-lined or full SS) Size: DN15 - DN100, Flanges PN10/16 Full Port Design, TA-LUFT compliant Body/Bonnet: CF8M, CF3M Size: DN15 - DN150, PN10/16, ANSI 150lbs Glass Plates: Borosilicate, Body: CF8M, Lining: PFA, PFA-AS Gasket: C-4400, PTFE-T Sealing Cone: FFPM (perfluor), Valve Seat: PTFE-T Pressure: 1mbar-16bar, Temperature: upto 200°C Pressure: upto 16bar, Temperature: upto 160°C Sight Glasses (plastomer-lined) Sampling Ball Valves (plastomer-lined or full SS) Size: DN15 - DN150, Flanges PN10/16, ANSI150, Size: DN15 - DN150, PN10/16, ANSI150lbs Body/Bonnet: ASTM A216 WCB or CF8M Body: CF8M, Lining: PFA, PFA-AS Linings: PFA, PFA-AS (anti-static), PVDF, PolyPro Liner/Ball: PTFE/Duplex PFA encapsulated Glass Plates: Borosilicate, Gasket:C-4400 asbestos free Ball Seat: PTFE-T Pressure: 1mbar-16bar, Temperature: upto 200°C Pressure: upto 16bar, Temperature: upto 200°C Swing Check Valves (plastomer-lined) In-Line Sampling Valves (plastomer-lined or full SS) Size: DN40 - DN400, Flanges PN10/16, ANSI 150 lbs TA-LUFT compliant Body/Bonnet: CS, SS Size: DN15 - DN150, PN10/16, ANSI 150lbs Lining: PFA, PFA-AS Body: CF8M/CF3M, Lining: PFA, PFA-AS, PVDF Disc: PFA, PFA-AS (encapsulated) or Solid Titanium Gr.2 Spindle Gasket: Valflon Pressure: upto 10bar, Temperature: upto 200°C Pressure: 1mbar upto 40bar, Temperature: upto 230°C Butterfly Valves (plastomer-lined) Reactor Sampling Systems (plastomer-lined, manual) Size: DN25 - DN1000, Flanges PN10/16, ANSI150lbs, Main Valve Std. 1” - 150lbs, PFA-lined, Manual. The Body/Bonnet: ASTM A216 WCB or CF8M basic version is available with air driven diaphragm Liners: PTFE, PTFE-AS (anti-static), UHMWPE pump. The system operates to extract the requiredDisc: PFA, PFA-AS, PVDF, ETFE, SS, Titanium, Hastelloy C sample by means of vacuum or under pressurized Pressure: 1mbar-16bar, Temperature: upto 220°C condition. Pressure: 500mbar upto 10bar and Temperature upto 180°C. www.adroittflowcontrol.com
  12. 12. Thompson Equipment Company Inc., was founded in 1947 as a manufacturer representative of process control instrumentation and related equipment. Later, the company acquired patented design of consistency regulators and commenced manufacturing under “TECO” brand name. Subsequently, company acquired patented design & specifications of DRAINAC-Freeness Indicator, BRAINAC-Refiner Control Instrument, and still-to-be-released FLIC-Fibre Length Indication Control System. The Pulp & Paper Solutions Division of TECO offers the products in below categories :- > Consistency Measurement > Freeness Measurement & Control > Refiner Control System > Fibre Length Indication Control SystemC3000 Fixed Mount Consistency C9700 Fixed Wing Consistency DRAINAC IIIB - Online Freeness TransmitterSensor (2.5% - 18% consistency) Sensor (1.5% - 12% consistency) (0-800 CSF, 10-90 Deg. SR, 0.5-0.6% Consistency)• Wide Consistency Range • Effective measurement at lower • Fast Sample Rate (2-3 samples per minute)• Angled Design helps shedding consistency (at 1.5%) • Direct Measurement in selected Unit of Measure• Immune to lower flow rates • Wide Consistency Range • Complete In-Line System, No wasted raw material• No moving part • Wide flow rates • Self Cleaning System, Minimizes maintenance• low maintenance • No moving parts - low maintenance • Digital Communication, Integrates with DCSHK Microwave Consistency TMC-6000 Consistency Transmitter BRAINAC Refiner Control SystemSensor (0.5% to higher consistency) Designed as a complete solution to fit your refiner control needs. Used as a standalone system or hooked to any DCS platform, Brainac will optimize your refiner controls thru’ controlling : Specific Energy, Freeness and overall power• One point calibration To be used as common electronic unit consumption. Brainac is a unique triple cascade• Immune to changing flow rate with all TECO consistency sensors. control unit which uses measurement of Power,• Immune to change in furnish • Easy setup & calibration Consistency, Flow and Freeness to provide accurate• Highest tolerance to conductivity • Multiple Grades/Furnish calibration control of your refiners. Equipped with redundant• Lowest Cost can be stored. power supplies, automatic unload alarm limits & measurement validity check, Brainac ensures safety • Active Velocity Compensation can be for refiner controls. provided for better accuracy. www.adroittflowcontrol.com
  13. 13. www.adroittflowcontrol.com
  14. 14. For over 30 years, Vortex Valves, Division of Salina Vortex Corporation, has provided break-through solutions for handling world’sdry bulk solids, catering to global network of original equipment manufacturers, Fortune 500 companies and process engineeringfirms. All over the world, over 10,000 companies such as PolyOne, Dow Chemical, Nestle & Morton Salt have utilized Vortex’sinnovative slide gates, diverters, iris valves and custom engineered products to improve process efficiency. Vortex range of products include : • Quantum Orifice Slide Gate • HDP Slide Gate • Quick Clean Orifice Gate • Abrasive Duty Slide Gate • 2-way/3-way/4-way Wye-Line Diverter • Multi-Port Diverter • 2way/3way Seal Tite Diverter • Abrasive Duty DiverterPowder & Dust • Gravity Vee Diverter • Metering Controls & Accessories Granules Media / Applications : • Air, Powder, Dust • Granules, Pellets, Coal • Charcoal Briquettes • Abrasives, Sticky Material • Limestone, Sand, Gravel • Cement, Soda Ash Pellets • Alumina Powder, Phylosilicates • Mellamine, Antimony Oxide AbrasivesIndustries Served :• Plastics• Chemical / Petrochemical• Mines & Minerals• Pharmaceuticals Vortex Valves can be offered with customised application specific modifications in Seal/• Food & Dairy Seat, Gate/Blade, Body, Drive/Actuation, Position feedback and end connections. Vortex• Pigments offers variety of controls that allow variable positioning of the gate blade on the opening• Cement or closing strokes, suitable for applications in Batching, Screw Conveyors, Dribble Flow,• Textile & Agriculture Scaling Operations, Loss in Weight Feeders and Truck/Rail Loading. Please contact us for more details. www.adroittflowcontrol.com
  15. 15. Adroitt Flow Control is founded as sales & marketing organization representing globally reputed premium capital equipment manufacturers, serving customers in India, Pakistan, Bangladesh and Sri Lanka. Adroitt Flow Control is committed to ‘delivering solutions’ to customers with sense of urgency, fulfilling customer’s expectations with quality products and services and providing single point responsibility. Our product portfolio begins essentially with technical assistance to customer in sizing & selecting suitable design and product in consultation with our principal, along with installation, commissioning and after-sales service support through strong dedicated team of technically qualified and trained engineers. ‘Adroitt’ meaning ‘skillful’ ‘dexterous’ ‘adept’ ‘competent’ and nimble - it will be our continuous endeavor for improvement in products and services through feedback analysis and corrective measures. Sales Office: 601 • Shree Swami KrupaRegistered Office: Dhobi Ali • Tembhi Naka Thane (W) • Mumbai 400601 • IndiaD-604 • Rameshwar Phone +91 9320001463Neelkanth Heights Fax +91 22 6645 9630Pokhran Road 2 enquiry@adroittflowcontrol.comThane (W) • Mumbai 400610 • India www.adroittflowcontrol.com

×