What's Next ? SIMATIC NET SIMATIC HMI SIMATIC M7 SIMATIC S5 and other courses on PCS7, IT, NC .... SIMATIC S7
Our Automation and Drives Training <ul><li>Training Courses  </li></ul><ul><ul><li>on site or in </li></ul></ul><ul><ul><l...
SIMATIC Training <ul><li>SIMATIC S7 </li></ul><ul><li>SIMATIC M7 </li></ul><ul><li>SIMATIC HMI (COROS, ProTool, WinCC) </l...
Upgrade from SIMATIC S5 to SIMATIC S7 SIMATIC S7 Upgrade SIMATIC S5 -> S7 ST-7UPPROG 5 days Configuring/Programming Good S...
SIMATIC S7 System Training  SIMATIC S7 Troubleshooting ST-7STOE 5 days SIMATIC S7 Programming 1 ST-7PRO1 5 days SIMATIC S7...
SIMATIC S7-200 Training SIMATIC S7 S7-200 Workshop ST-7MICRO   2 days Basic knowledge of control engineering  PC/Windows k...
SIMATIC M7 System Training SIMATIC M7 Programming with CFC ST-7CFC   2 days SIMATIC S7 knowledge  equivalent to ST-7PRO1 S...
SIMATIC S7/M7 Option Packages Programming the Inter- face Controller S7-300 NC-S7APT   3 days SIMATIC S7 Sequential Contro...
SIMATIC NET  SIMATIC S7/M7 Communication  PROFIBUS-FMS KO-7KFMS  2 days SIMATIC S7 Communication with  Industrial Ethernet...
SIMATIC WinCC SIMATIC WinCC Open System N ST-BWINCCN   1 day SIMATIC WinCC Open System E ST-BWINCCE  2 days C knowledge, b...
SIMATIC - New Courses for 1998/99 SIMATIC S7 knowledge equivalent to the  ST-7PRO1 or ST-7UPPROG courses Experience with g...
Actuator-Sensor-Interface - New Courses for 1998/99 SIMATIC S5 and/or SIMATIC S7 knowledge and  basic knowledge of data co...
SIMATIC NET - New Courses for 1998/99 Basic knowledge of data communication / local networks Planning engineer, Commission...
SIMATIC S5 - System and Supplementary Courses  Basic knowledge of control engineering Planning engineer/Programming engine...
PLC Technician SIMATIC S5 and SIMATIC S7 SIMATIC S7 PLC Programmer (based on SIMATIC S7) ST-SPSPROF 8 Wochen SIMATIC S7 PL...
Still have questions ? <ul><li>We‘ll help you!  </li></ul><ul><li>... with the info-line: </li></ul><ul><li>Tel 01805 23 5...
Upcoming SlideShare
Loading in …5
×

20 what’s next

1,344 views

Published on

Published in: Education, Business, Technology
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
1,344
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
75
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide
  • We &apos; d just like to say a few words... Contents: • What&apos;s Next ? • Our Automation and Drives Training • SIMATIC Training • Systematic SIMATIC S5 Training • Upgrade from SIMATIC S5 to SIMATIC S7 • SIMATIC S7 System Training • SIMATIC S7-200 Training • SIMATIC S7/M7 Option Packages • SIMATIC NET • SIMATIC WinCC • PLC Technician
  • What are the advantages of our SIMATIC Training for you? • Fast, effective acquisition of knowledge • Saves downtimes at your plant • Ensures quality • Gives you motivated personnel • Simplifies and shortens decision-making processes Note The following pages present just a sample of our extensive range of SIMATIC courses . On the last page you‘ll find a fax form with the addresses of our course offices. We‘ll gladly send you information about our entire course spectrum ! Look us up in the Internet: http://www.ad.siemens.de/training or call our Info Line: Tel: 01805 23 56 11 Fax: 01805 23 56 12
  • You have just attended one of our courses and we hope it came up to your expectations. Above all, we hope you will be able to use the knowledge you obtained at the course to advantage in your work. We would like to continue to be your partner in training for your career in the future. For this reason we have outlined some of our current courses for you on the next few pages .
  • ST-7UPPROG Upgrade SIMATIC S5 -&gt; S7 Course Contents - Overview of the SIMATIC S7, components, performance features (Excerpt): - The STEP7 programming language and its components - Using block types and symbols for program structuring and program creation - Test tools for system information, troubleshooting and diagnostics - Carrying out a hardware configuration of the modules - Communication via MPI interface - Integration of SIMATIC S5 - Conversion of S5 programs
  • ST-7PRO1 SIMATIC S7 Programming 1 Course Contents - System overview and main performance features (Excerpt): - The STEP7 programming language and its components - Block types and symbols for program structuring and program creation - Test tools for system information, troubleshooting and diagnostics - Carrying out a hardware configuration of the modules - Communication via MPI interface ST-7PRO2 SIMATIC S7 Programming 2 Course Contents - Ability to use status bit dependent operations, accumulator operations and (Excerpt): expanded real number arithmetic - Ability to use complex structures with parameters - Using indirect addressing in the program - Ability to integrate system functions (SFC) in the program - Ability to utilize communication function blocks (CFB) ST-7SYH SIMATIC S7 System Handling Course Contents - Ability to configure and install a programmable logic controller (Excerpt): - Hardware and software commissioning of the programmable logic controller - Overview of the S7-300 software configuration and parameter assignment ST-7STOE SIMATIC S7 Troubleshooting Course Contents - Using STEP 7 software for troubleshooting (Excerpt): - Detecting and eliminating software errors, that lead to the Stop state - Diagnosing program errors with I STACK and B STACK - Troubleshooting in networked PLC systems
  • ST-7MICRO SIMATIC S7, S7-200 Workshop Course Contents - Becoming familiar with the performance features of the SIMATIC S7-200 PLCs (Excerpt): and programming devices - Expansion facilities and addressing of the S7-200 - Ability to structure, write, document and start up simple programs for control tasks on SIMATIC S7-200 PLCs - Ability to use STEP7 Micro/WIN programming tools for program creation, documentation, program test and troubleshooting
  • ST-7MSYS SIMATIC M7, System Design Course Contents - Components of M7-300 and M7-400 (hardware and software) (Excerpt): - Interaction of S7 and M7 - Simple programming examples with C and CFC ST-7MC32 C Programming Interface for M7 Course Contents - RMOS API functions (excerpt) (Excerpt): - Priorities, multitasking, messages, ... - M7 API functions (excerpt) - Access to process I/O, S7 server objects, interrupts, ... ST-7MSERV SIMATIC M7, Service Course Contents - Interaction of hardware and configuration (BIOS, STEP7) (Excerpt): - CPUs and FMs (properties, rules, limits) - Standard Interface Modules - Function test and troubleshooting ST-7CFC SIMATIC M7/S7, Graphic Programming with CFC Course Contents - Programming tool for graphic programming of SIMATIC S7/M7 (Excerpt): - Program configuration - Interconnection of blocks - Programming user blocks in STEP7 - Test and diagnostic facilities, documentation
  • ST-7GRAPH SIMATIC S7, Sequential Control with S7-GRAPH Course Contents - Programming sequencers (Excerpt): - Program creation with S7-GRAPH - Comparison of GRAPH 5 to S7-GRAPH - Test and diagnostic facilities, program documentation NC-S7APT Programming Interface Controller S7-300 Course Contents - Overview of the controllers FMNC, 810D and 840D (Excerpt): - Structure of the PLC - NC interface - Fast data exchange between PLC and NC - Communication structures - Practical exercises on the individual topics NC-ZSG HIGRAPH Programming SIMATIC S7 Course Contents - Programming machine controllers with HiGRAPH. (Excerpt): - Programming tools and their use - Test and diagnostic facilities - Program documentation, exercises ST-7SCL SIMATIC S7, Programming with SCL Course Contents - S7-SCL high level language for SIMATIC S7 controllers (Excerpt): - S7-SCL tools - Program structure, language structure and program commands - Test and diagnostic facilities, exercises ST-7CFC SIMATIC M7/S7, Graphic Programming with CFC Course Contents - Programming tool for graphic programming of SIMATIC S7/M7 (Excerpt): - Program configuration - Interconnection of blocks - Programming user blocks in STEP7 - Test and diagnostic facilities, documentation
  • ST-7PTP SIMATIC S7, Point-to-Point Connection Course Contents - Performance features and technical specifications of CP340 and CP441 (Excerpt): - Creating configuration and parameter assignments of the communication processors - Writing user programs for CP340 and CP441 - Diagnostic facilities of CP340 and CP441 KO-7KDP SIMATIC S7, PROFIBUS-DP Course Contents - Structure and functional principle of distributed I/O (Excerpt): - Planning and configuring the DP-Master in SIMATIC S7 - User programming and diagnostic facilities KO-7KFMS SIMATIC S7, PROFIBUS-FMS Course Contents - FMS mode of operation (Excerpt): - Configuration software NCM for PROFIBUS - Programming FMS applications - Diagnostic and test facilities KO-7KPROFI SIMATIC S7, PROFIBUS-DP/FMS Contents of the KO-7KDP and KO-7KFMS courses KO-7KETHER SIMATIC S7, Industrial Ethernet Course Contents - Mode of operation, properties and components of the Industrial Ethernet bus (Excerpt): system - ISO and TCP/IP protocols - Configuration using the configuration software NCM-S7 for Industrial Ethernet - Diagnostic functions
  • ST-BWINCCS SIMATIC WinCC, Workshop Course Contents - WinCC system overview (Excerpt): - Windows 95 (settings), using the standard Windows interfaces - Creating a project, PLC connections, variable simulation, graphics - Message display, message archiving - Trend display, measured value archiving, user archives - Report system, background processing (Global Scripts) - API open user interface (use and structure) - Practical exercises ST-BWINCCE SIMATIC WinCC Open System E Course Contents - Introduction to the WinCC- system architecture (open interfaces and (Excerpt): integration capability, databases, channel DLL, Global Scripts), introduction to Visual C++, ODK (development environment for API), WinCC-API structuring, using API functions, - Practical exercises ST-BWINCCN SIMATIC WinCC Open System N Course Contents - Brief introduction to the WinCC- system architecture (open interfaces and (Excerpt): integration capability, databases, channel DLL), general introduction to Global Scripts, accessing WinCC databases with Excel, OLE functions - Practical exercises
  • ST-7WINAC SIMATIC S7, PC Based Control with WinAC Course Contents - Introduction to PC based control with SIMATIC WinAC (Excerpt): - WinAC hardware components, properties, components - Use of data-OCX and supplied OCXs - Assigning parameters to the MPI card - Overview of OPC / ActiveX / DCOM for WinAC ST-BPROPRS SIMATIC ProTool/Pro Workshop Course Contents - SIMATIC ProTool/Pro system overview (Excerpt): - Basics of graphic screen creation - User functions (introduction to VBScript) - Message configuration, message display, message archiving - Trend configuration, trend display, measured value archiving ST-BPROPRU Upgrade SIMATIC ProTool -&gt; ProTool/Pro Course Contents - Expansions of ProTool/Pro when compared with ProTool (Excerpt): - Graphic screen creation - User functions - Message archiving and measured value archiving
  • KO-ASIG Actuator-Sensor-Interface, Basic Course Course Contents - Basics of the Actuator-Sensor-Interface (AS-Interface) (Excerpt): - Structure and configuration - AS-i Master, supply cables, power supply unit, control and signal modules, motor starter, consumer branch circuits,... - Diagnostic facilities KO-ASIA Actuator-Sensor-Interface, Advanced Course Course Contents - Function blocks and handling blocks for the extended operation of the Master (Excerpt): modules - In-depth knowledge of system components - PROFIBUS DP/AS-Interface transitions - Service and diagnosis with SCOPE S1 for AS-Interface
  • KO-OPC OLE for Process Control, Basic Course Course Contents - OPC goals and background (Excerpt): - OLE basics (architecture of the NET software) - Installation of the NET hardware and software components - Implementation example based on the SIMATIC NET OPC products - S7-OPC Server - DP-OPC Server KO-S7TCPL S7/PC Communication via LAN with TCP/IP Course Contents - Industrial Ethernet mode of operation and networking components (Excerpt): - The Internet protocol family - Comparison of ISO/OSI and TCP/IP - The transport protocols TCP and UDP - TCP/IP with SIMATIC NET KO-S7INTER Internet Communication of the SIMATIC S7 Course Contents - Internet origins and technology (Excerpt): - Using the Internet in automation technology - Safety concepts - SIMATIC S7 in the Internet - world-wide access for commissioning, testing and maintenance
  • System Courses System training Service training Compact courses for engineers Programming courses Supplementary Project planning/configuring Courses Sequential control with GRAPH 5 Fail-safe and fault-tolerant systems Digital control engineering Software-based closed-loop control Positioning with IP246/266 Point-to-point connections L1 bus communication SIMATIC S5, PROFIBUS CP 5431 FMS workshop S5-95/PROFIBUS workshop SIMATIC S5, Industrial Ethernet Course Contents For full details of the contents of these courses please refer to our ITC catalog. You can obtain this catalog through your trainer or order it yourself from the Course Office direct (see last page for address and fax form). Alternatively you can obtain information via: Internet: http://www.ad.siemens.de/training Info Line: Tel: 01805 23 56 11 Fax: 01805 23 56 12
  • Qualification for Our structured training course for PLC technicians is based on the requirements PLC Technicians of the VDMA/ZVEI 1) . These requirements define what a skilled PLC technician needs to know and be able to do, regardless of the brand of PLC and from the point of view of the user. Training can take the form of: • distance learning , • evening courses or • daytime courses . Trainees can take an examination at the end of this training sequence. This normally takes one day and consists of a theory section and a practical section. For further information, please see our ITC catalog or the special information sheet about training for PLC technicians. 1) Association of German Machine and Plant Manufacturers (VDMA) Association of the Electrical and Electronics Industry (ZVEI) Upgrade PLC technicians who have completed their training with SIMATIC S5 can obtain a further qualification in an upgrade course dealing with the differences between SIMATIC S5 and SIMATIC S7 .
  • Now it‘s your turn ...
  • 20 what’s next

    1. 1. What's Next ? SIMATIC NET SIMATIC HMI SIMATIC M7 SIMATIC S5 and other courses on PCS7, IT, NC .... SIMATIC S7
    2. 2. Our Automation and Drives Training <ul><li>Training Courses </li></ul><ul><ul><li>on site or in </li></ul></ul><ul><ul><li>200 locations in </li></ul></ul><ul><ul><li>60 countries </li></ul></ul><ul><li>Future-oriented and Topical Training </li></ul><ul><ul><li>first hand </li></ul></ul><ul><ul><li>from the market leader </li></ul></ul><ul><li>Task-oriented Training </li></ul><ul><ul><li>individually decided with you </li></ul></ul><ul><li>Training for everybody, in all areas of Automation and Drives </li></ul>Training from A&D
    3. 3. SIMATIC Training <ul><li>SIMATIC S7 </li></ul><ul><li>SIMATIC M7 </li></ul><ul><li>SIMATIC HMI (COROS, ProTool, WinCC) </li></ul><ul><li>SIMATIC NET (PROFIBUS, Ethernet) </li></ul><ul><li>SIMATIC S5 </li></ul>
    4. 4. Upgrade from SIMATIC S5 to SIMATIC S7 SIMATIC S7 Upgrade SIMATIC S5 -> S7 ST-7UPPROG 5 days Configuring/Programming Good SIMATIC S5 knowledge and SIMATIC S5 programming experience PC and Windows knowledge S 5 S 7
    5. 5. SIMATIC S7 System Training SIMATIC S7 Troubleshooting ST-7STOE 5 days SIMATIC S7 Programming 1 ST-7PRO1 5 days SIMATIC S7 System Handling ST-7SYH 5 days SIMATIC S7 Programming 2 ST-7PRO2 5 days Installation/Maintenance Basic knowledge of control engineering Configuring/Programming Technical training such as engineer, technician PC/Windows knowledge, Programming experience, Knowledge of digital technology SIMATIC NET SIMATIC S7 Option packages SIMATIC M7 SIMATIC HMI
    6. 6. SIMATIC S7-200 Training SIMATIC S7 S7-200 Workshop ST-7MICRO 2 days Basic knowledge of control engineering PC/Windows knowledge Configuring/Programming and Installation /Maintenance S 7 - 2 0 0
    7. 7. SIMATIC M7 System Training SIMATIC M7 Programming with CFC ST-7CFC 2 days SIMATIC S7 knowledge equivalent to ST-7PRO1 SIMATIC M7 Programming with C ST-7MC32 2 Days SIMATIC M7 Service ST-7MSERV 3 days PC/Windows knowledge Programming engineers, Planning engineers and Commissioning engineers SIMATIC M7 System Design ST-7MSYS 3 days C knowledge equivalent to IT-CKOMP or IT-CEIN
    8. 8. SIMATIC S7/M7 Option Packages Programming the Inter- face Controller S7-300 NC-S7APT 3 days SIMATIC S7 Sequential Control with S7-GRAPH ST-7GRAPH 2 days SIMATIC S7 HiGraph Programming NC-ZSG 3 days SIMATIC S7 Graphic Programming with CFC ST-7CFC 2 days SIMATIC S7 Programming with SCL ST-7SCL 2 days SIMATIC S7 knowledge equivalent to the ST-7PRO1 or ST-7UPPROG courses Configuring/Programming S7-GRAPH S7-HiGraph CFC S7-SCL
    9. 9. SIMATIC NET SIMATIC S7/M7 Communication PROFIBUS-FMS KO-7KFMS 2 days SIMATIC S7 Communication with Industrial Ethernet KO-7KETHER 3 days SIMATIC S7 Point-to-Point Connection ST-7PTP 2 days SIMATIC S7 Distributed I/O PROFIBUS-DP KO-7KDP 2 days SIMATIC S7 knowledge equivalent to the ST-7PRO1 or ST-7UPPROG courses Configuring/Programming SIMATIC S7 Communication with PROFIBUS KO-7KPROFI 4 days
    10. 10. SIMATIC WinCC SIMATIC WinCC Open System N ST-BWINCCN 1 day SIMATIC WinCC Open System E ST-BWINCCE 2 days C knowledge, basic knowledge of relational databases Good knowledge of C, Win95/NT knowledge, Experience with graphic interfaces, e.g. Windows 95/NT Configuring/Programming SIMATIC WinCC Human-Machine Interface, System Training ST-BWINCCS 5 days
    11. 11. SIMATIC - New Courses for 1998/99 SIMATIC S7 knowledge equivalent to the ST-7PRO1 or ST-7UPPROG courses Experience with graphic interfaces, e.g. Windows 95/NT Configuring/Programming SIMATIC S7 PC Based Control with WinAC ST-7WINAC 2 days new SIMATIC ProTool/Pro ProTool/Pro Workshop ST-BPROPRS 3 days new SIMATIC ProTool/Pro Upgrade ProTool -> ProTool/Pro ST-BPROPRU 2 days new
    12. 12. Actuator-Sensor-Interface - New Courses for 1998/99 SIMATIC S5 and/or SIMATIC S7 knowledge and basic knowledge of data communication Planning, Programming, and Commissioning engineers, Installation, Maintenance and Service personnel Actuator-Sensor-Interface Basic Course KO-ASIG 1 day new Actuator-Sensor-Interface Advanced Course KO-ASIA 1 day new
    13. 13. SIMATIC NET - New Courses for 1998/99 Basic knowledge of data communication / local networks Planning engineer, Commissioning engineer and User OLE for Process Control Basic Course KO-OPC 2 days new S7/PC Communication via LAN with TCP/IP KO-S7TCPL 1 day new Internet Communication of SIMATIC S7 KO-S7INTER 1 day new
    14. 14. SIMATIC S5 - System and Supplementary Courses Basic knowledge of control engineering Planning engineer/Programming engineer, Installation and Maintenance personnel SIMATIC S5 Service Training ST-S5SERV 5 days SIMATIC S5 Programming 1 ST-S5PRG1 5 days SIMATIC S5 System Training Part 2 ST-S5SYS2 5 days SIMATIC S5 System Training Part 1 ST-S5SYS1 5 days SIMATIC S5 - Supplementary Courses
    15. 15. PLC Technician SIMATIC S5 and SIMATIC S7 SIMATIC S7 PLC Programmer (based on SIMATIC S7) ST-SPSPROF 8 Wochen SIMATIC S7 PLC Technician (based on SIMATIC S7) ST-SPSTEF 6 months Installation/Maintenance and Service personnel Evening training course according to VDMA/ZVEI SIMATIC S5 PLC Technician (based on SIMATIC S5) ST-SPSTEA5 14 weeks SIMATIC S7 Upgrade S5 -> S7 ST-7UPSPS 14 weeks SIMATIC S7 PLC Technician (based on SIMATIC S7) ST-SPSTEA7 14 weeks Distance learning
    16. 16. Still have questions ? <ul><li>We‘ll help you! </li></ul><ul><li>... with the info-line: </li></ul><ul><li>Tel 01805 23 56 11 </li></ul><ul><li>Fax 01805 23 56 12 </li></ul><ul><li>... in the Internet: </li></ul><ul><li>www.ad.siemens.de/training </li></ul>

    ×