Assembly of Machine vice

17,979 views

Published on

Assembly of Machine vice, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.

Published in: Education
4 Comments
22 Likes
Statistics
Notes
No Downloads
Views
Total views
17,979
On SlideShare
0
From Embeds
0
Number of Embeds
2,782
Actions
Shares
0
Downloads
922
Comments
4
Likes
22
Embeds 0
No embeds

No notes for slide

Assembly of Machine vice

  1. 1. Tutorial on Machine vice Hareesha N G Dept of Aeronautical Engg Dayananda Sagar College of Engg Bangalore-78 4/16/2013 1Hareesha N G, DSCE, Blore-78
  2. 2. Machine vice Assembly 4/16/2013 2Hareesha N G, DSCE, Blore-78
  3. 3. Exploded view of machine vice 4/16/2013 3Hareesha N G, DSCE, Blore-78
  4. 4. Exploded view of machine vice 4/16/2013 4Hareesha N G, DSCE, Blore-78
  5. 5. 4/16/2013 5 Hareesha N G, DSCE, Blore-78 Part 1: Body Sketch on front plane or XZ plane as shown in fig. Sym protrusion distance 100 mm. Create round R 10mm
  6. 6. 4/16/2013 6Hareesha N G, DSCE, Blore-78 Sketch on Top face or XY plane as shown in fig. Cut out using depth 57 mm Create rounds at all corners Rad 5mm
  7. 7. 4/16/2013 7Hareesha N G, DSCE, Blore-78 Sketch on the plane as shown in fig. select outer rectangle cutout giving 10mm depth. select inner rectangle cutout giving 13 mm depth.
  8. 8. 4/16/2013 8Hareesha N G, DSCE, Blore-78 Select the plane as shown in fig. create sketch,. Protrude it giving 5mm height. Create round using rad 5mm. Mirror to other side.
  9. 9. 4/16/2013 9Hareesha N G, DSCE, Blore-78 Select the plane as shown in fig. create sketch,. Protrude it giving 20 mm height. Mirror to other side.
  10. 10. 4/16/2013 10Hareesha N G, DSCE, Blore-78 Select the parallel plane as shown in fig. create sketch,. Protrude it giving 3 mm height. Mirror to other side.
  11. 11. 4/16/2013 11Hareesha N G, DSCE, Blore-78 Select the plane as shown in fig. create hole of dia 20mm. Select the other end as shown in fig. create hole of dia 12 mm
  12. 12. 4/16/2013 12Hareesha N G, DSCE, Blore-78 Select the plane as shown in fig. set hole options as shown. Place the holes as shown. Create threaded holes as shown in fig.
  13. 13. 4/16/2013 13Hareesha N G, DSCE, Blore-78 Select the plane as shown in fig. set hole options as shown. Place the holes as shown. Counter sink holes, use up-to next
  14. 14. 4/16/2013 14Hareesha N G, DSCE, Blore-78 Part 2: Movable Jaw Sketch on front plane or XZ plane as shown in fig Symmetric protrusion distance 100 mm
  15. 15. 4/16/2013 15Hareesha N G, DSCE, Blore-78 Select the plane as shown. Create sketch as shown. Cut out through all
  16. 16. 4/16/2013 16Hareesha N G, DSCE, Blore-78 Select the plane as shown. Create threaded holes as shown use the dimensions given in sketch as shown.
  17. 17. 4/16/2013 17Hareesha N G, DSCE, Blore-78 Select the plane as shown. Create threaded holes as shown use the dimensions given in sketch as shown.
  18. 18. 4/16/2013 18Hareesha N G, DSCE, Blore-78 Part 3: Jaw Grip Sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 8 mm Create counter sink hole of diameter 6.3 mm, countersink dia of 12 mm
  19. 19. 4/16/2013 19Hareesha N G, DSCE, Blore-78 Part 4: Screw M6 Step 1: Revolved protrusion Sketch on front plane or XZ plane as shown in fig Use revolve protrusion angle 1800
  20. 20. Part 5: Screw Rod Step 1: Revolved Protrusion Sketch on front plane or XZ plane as shown in fig Use revolve protrusion angle 1800 4/16/2013 20Hareesha N G, DSCE, Blore-78
  21. 21. Step 2: Cut out & Thread Sketch on Right plane or YZ plane as shown in fig Use symmetric cut out through all Create thread on cylindrical body 4/16/2013 21Hareesha N G, DSCE, Blore-78
  22. 22. Part 6: Washer Create sketch on top plane or XY plane as shown in fig Symmetric protrusion distance 3 mm 4/16/2013 22Hareesha N G, DSCE, Blore-78
  23. 23. Part 7: Nut Create sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 8 mm 4/16/2013 23Hareesha N G, DSCE, Blore-78
  24. 24. Part 8: Nut Create sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 5 mm 4/16/2013 24Hareesha N G, DSCE, Blore-78
  25. 25. Part 8: Clamping Plate Create sketch on Top plane or XY plane as shown in fig Symmetric protrusion distance 8 mm Create countersink hole of dia 6.3 mm and countersink dia 12 mm 4/16/2013 25Hareesha N G, DSCE, Blore-78

×