• Like
  • Save
GWC Valve International Flanged Floating Ball Valves
Upcoming SlideShare
Loading in...5
×
 

GWC Valve International Flanged Floating Ball Valves

on

  • 337 views

GWC Valve International Flanged Floating Ball Valves are designed, constructed, and tested according to API and ASME/ANSI Standards. Other ...

GWC Valve International Flanged Floating Ball Valves are designed, constructed, and tested according to API and ASME/ANSI Standards. Other
international standards including BS and Din available upon request.

GWC Valve International brochure for valves that we manufacture nationally and internationally.

GWC products are designed, engineered and manufactured to exceed your stringent process requirements.

GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.

Statistics

Views

Total Views
337
Views on SlideShare
337
Embed Views
0

Actions

Likes
0
Downloads
4
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

    GWC Valve International Flanged Floating Ball Valves GWC Valve International Flanged Floating Ball Valves Document Transcript

    • GWC Valve InternationalProventechnologyforindividualvalvesolutions–worldwideFLANGED FLOATINGBALL VALVESPRESSURE CLASS:ASME 150-600SIZE RANGE: 1/2” - 10”API STANDARDS: 6D & 608ASME B16.34Catalog Number FBV-1001
    • GWCValveInternational3TABLE OF CONTENTSSplit Body Ball Valves 4Unibody Ball Valves 5Split Body & Unibody Safety Features 6Ordering Guide 7S t a n d a r d F e a t u r e sS t a n d a r d P r o d u c t sUnibody Valves 8Split Body Valves 9Pressure/Temperature Charts 12Terms and Conditions of Sale 13Return Goods Policy and Warranty 14
    • GWCValveInternational4The GWC SPLIT BODY ball valves aredesigned, constructed and tested accordingto the most recent international standards,such as API, ASME, BS, DIN, etc.Split Body Ball Valves1. Body2. Cap3. Ball4. Stem5. Anti-Static Spring And Ball6. Gland Bushing7. Gland Flange8. Combination Lock Stop9. Cavity Relieving Seat10. Stem O-Ring11. Gland O-Ring12. Packing13. Back Seat14. Spiral Wound Gasket15. Body Stud16. Body Nut17. Gland Screw18. Stem Washer19. Stem Bolt20. Stem Bushing21. Gland Bearing22. Snap Ring23. Handle Joint24. Handle BarStandard Features2013
    • GWCValveInternational5Standard FeaturesThe GWC UNIBODY ball valves are designed,constructed and tested according to the mostrecent international standards, such as API,ASME, BS, DIN, etc.1. Body2. Cap3. Ball4. Stem5. Anti-Static Spring And Ball6. Gland Bushing7. Gland Flange8. Combination Lock Stop9. Cavity Relieving Seat10. Stem O-Ring11. Gland O-Ring12. Packing13. Back Seat14. Graphite Gasket15. PTFE Gasket16. Gland Screw17. Stem Washer18. Stem Bolt19. Stem Bushing20. Gland Bearing21. Snap Ring22. Handle Joint23. Handle BarUn i b o d y Ba l l Va lv e s
    • GWCValveInternational6Split Body & Unibody Ball ValvesFigure 1Ball valves present a particular problem with thebuild up of static electricity around the ball. AllGWC ball valves have anti-static devices whichprovides contact between stem and ball, and stemand body to eliminate static electricity.Figure 2In the event of a fire the valve is required to make adownstream seal. Even after the disintegration ofthe RTFE seats, GWC ball valves have an excellentmetal to metal seal.Figure 3The combination of stem packing and o-ringsguarantee zero emissions even at low pressure.The primary seal is made out of flexible graphite,a material with extremely good resistance to fireconditions. The anti-blow out stem is insertedfrom inside the valve body.Figure 4Special attention has been paid to the mechanicalstrength and sealing efficiency of the centralflanged joint in the valve body.Figure 5 (unibody only)The PTFE gasket packing acts as a primary sealfor the Unibody ball valves. The secondary sealhas been made out of flexible graphite, a materialwith extremely good resistance to fire conditions.Standard FeaturesBody to stemanti-static springand ballBall to stem anti-static spring and ballMetal tometal (ballto body)Fire-safeseal afterRTFEmeltdownO-Rings(secondary seal)Flexible GraphicPacking (primaryseal)RTFE SeatSpiralwoundgasketGraphitegasketpacking(Secondaryseal)PTFE Gasket(Primary seal)Seat
    • GWCValveInternational7Ordering GuideExample: 4” Figure B150-1-BC-G2-L4” CLASS 150 FLOATING BALL VALVE, FLG-RF, FULL BORE, A216 WCB BODY x 316SSTRIM, RTFE SEAT, Viton-B O-RINGS, NACE, FIRESAFE, LEVER OP.15 0B 1 BC G2. 3.1. 4. 5. 6. 7.21. MODELA - FLOATING BALL, UNIBODY, REDUCED BOREB - FLOATING BALL, SPLIT BODY, FULL BOREC - FLOATING BALL, SPLIT BODY, REDUCED BORE2. RATING15 - CLASS 15030 - CLASS 30060 - CLASS 60090 - CLASS 900 *150 - CLASS 1500 ** 1/2” - 1” SIZES ONLY3. END CONNECTION0 - RF FLANGED7 - BUTTWELD (SCHEDULE REQUIRED)9 - RING JOINTX - SPECIAL4. TYPE1 - FIRE-SAFE 5. MATERIAL (Body + Trim)AC - WCB + 304BC - WCB + 316CC - WCB + A105/ENPDC - WCB + F6A/13CREC - LCC + LF2/ENPFC - LCC + F6A/13CRGC - LCC + 316HC - LCB + LF2/ENPIC - LCB + F6A/13CRJC - LCB + 316KC - CF8 + 304LC - CF8M + 316MC - CF3 + 304LNC - CF3M + 316LOC - CN7M + A/20PC - A890-4A + F51QC - A890-5A + F53RC - A890-6A + F55X - SPECIAL6. MATERIAL (SEAT)G - RTFEB - NYLONE - DEVLONV - PEEKJ - DELRINM - METALX - SPECIAL8. OPERATORL - HANDWHEEL OPERATOR GO - WORM GEAR OPERATOR B - BARE STEM9. SPECIAL REQUIREMENTSEB - EXTENDED BONNET S - SUPPLY COMPLETE INFORMATION7. MATERIAL (o-ring SEAL)1 - HNBR2 - Viton-B3 - VITON-GLT4 - EPDM5 - AFLAS6 - PTFE7 - GRAPHITEX - SPECIAL8.L
    • GWCValveInternational8Model A150/A300Construction: Unibody, reduced bore, free floating ball, fire-safecertified to API-607, blow-out proof stem, cavityrelieving seats, anti-static device, designed andtested according to ASME B16.34, BS5351 andAPI-6D.Dimensions Face to Face ASME B16.10 Short Pattern End Flange ASME B16.5 Rating ASME Class 150-300**NACE MR-01-75 Certified** Valve Size2”50mm3”80mm4”100mm6”150mm8”200mmBore Size (d) 1.50 2.50 3.00 4.00 6.00Face to Face (A) 7.00 8.00 9.00 10.50 11.50Length of Lever (C) 10.50 10.50 15.30 19.20 -Approx. Weight (lbs.) 16 28 54 84 160Dimensions in inchesClass 150Dimensions in inches Valve Size2”50mm3”80mm4”100mm6”150mm8”200mmBore Size (d) 1.50 2.00 3.00 4.00 6.00Face to Face (A) 8.50 11.125 12.00 15.875 16.50Length of Lever (C) 10.50 10.50 15.30 19.2 -Approx. Weight (lbs.) 24 50 85 132 200Class 300Standard MaterialsUNIBODY FLOATING BALL VALVEFigure Number A150-1-BC-G2-L, A300-1-BC-G2-L A150-1-LC-G2-L, A300-1-LC-G2-LBody/Retainer A216 WCB A351 CF8MBall/Stem 316SS 316SSSeats RTFE RTFEO-Rings Viton-B Viton-BSize 2 - 6 Inch Size 8 Inch
    • GWCValveInternational9 Valve Size1/2”15mm3/4”20mm1”25mm1-1/2”40mm2”50mm3”80mm4”100mm6”150mm8”200mmBore Size (d) 0.50 0.75 1.00 1.50 2.00 3.00 4.00 6.00 8.00Face to Face (A) 5.50 6.00 6.50 7.50 8.50 11.125 12.00 15.875 19.75Length of Lever (C) 6.02 6.02 8.66 9.84 9.84 13.78 18.11 31.50 -Wheel Diameter (F) - - - - - - - - 24.00Approx. Weight (lbs.) 9 11 15 28 38 75 110 230 481Dimensions in inches Valve Size1/2”15mm3/4”20mm1”25mm1-1/2”40mm2”50mm2-1/2”65mm3”80mm4”100mm6”150mm8”200mmBore Size (d) 0.50 0.75 1.00 1.50 2.00 2.50 3.00 4.00 6.00 8.00Face to Face (A) 4.25 4.625 5.00 6.50 7.00 7.50 8.00 9.00 15.50 18.00Length of Lever (C) 6.02 6.02 8.66 9.84 9.84 13.78 13.78 18.11 31.50 -Wheel Diameter (F) - - - - - - - - - 24.00Approx. Weight (lbs.) 5 7 10 20 26 35 56 80 172 378Dimensions in inchesModel B150/B300Class 300Class 150Construction: Split body, full bore, free floating ball, fire-safecertified to API-607, blow-out proof stem, cavityrelieving seats, anti-static device, designed andtested according to ASME B16.34, BS5351 andAPI-6D.Dimensions Face to Face ASME B16.10 Long Pattern End Flange ASME B16.5 Rating ASME Class 150-300**NACE MR-01-75 Certified**Standard MaterialsSPLIT BODY FLOATING BALL VALVESize 1/2 - 4 Inch Size 6 Inch Size 8 InchFigure Number B150-1-BC-G2-L, B300-1-BC-G2-L B150-1-LC-G2-L, B300-1-LC-G2-LBody/Cap A216 WCB A351 CF8MBall/Stem 316SS 316SSSeats RTFE RTFEO-Rings Viton-B Viton-B
    • GWCValveInternational10SPLIT BODY FLOATING BALL VALVEModel C150/C300Class 150Class 300 Valve Size2”50mm3”80mm4”100mm6”150mm8”200mm10”250mmBore Size (d) 1.50 2.00 3.00 4.00 6.00 8.00Face to Face (A) 7.00 8.00 9.00 10.50 11.50 13.00Length of Lever (C) 9.50 9.50 13.80 18.10 29.50 -Wheel Diameter (F) - - - - - 24.00Approx. Weight (lbs.) 21 48 69 124 189 446Dimensions in inches Valve Size2”50mm3”80mm4”100mm6”150mm8”200mm10”250mmBore Size (d) 1.50 2.00 3.00 4.00 6.00 8.00Face to Face (A) 8.50 11.125 12.00 15.875 16.50 18.00Length of Lever (C) 9.50 9.50 13.80 18.10 29.50 -Wheel Diameter (F) - - - - - 24.00Approx. Weight (lbs.) 30 58 97 208 370 581Dimensions in inchesConstruction: Split body, reduced bore, free floating ball, fire-safecertified to API-607, blow-out proof stem, cavityrelieving seats, anti-static device, designed andtested according to ASME B16.34, BS5351 andAPI-6D.Dimensions Face to Face ASME B16.10 Short Pattern End Flange ASME B16.5 Rating ASME Class 150-300**NACE MR-01-75 Certified**Figure Number C150-1-BC-G2-L, C300-1-BC-G2-L C150-1-LC-G2-L, C300-1-LC-G2-L Body/Cap A216 WCB A351 CF8MBall/Stem 316SS 316SSSeats RTFE RTFEO-Rings Viton-B Viton-BStandard MaterialsSize 2 - 6 Inch Size 8 Inch Size 10 Inch
    • GWCValveInternational11Construction: Split body, full bore or reduced bore, free floatingball, fire-safe certified to API-607, blow-out proofstem, cavity relieving seats, anti-static device,designed and tested according to ASME B16.34,BS5351 and API-6D.Dimensions Face to Face ASME B16.10 Long Pattern End Flange ASME B16.5 Rating ASME Class 600**NACE MR-01-75 Certified**Model B600/C600Class 600 • Reduced BoreClass 600 • Full Bore Valve Size2”50mm3”80mm4”100mm6”150mmBore Size (d) 1.50 2.00 3.00 4.00Face to Face(A)RF 11.50 14.00 17.00 22.00RTJ 11.62 14.12 17.12 22.11Length of Lever (C) 9.84 9.84 13.78 33.4Approx. Weight (lbs.) 42 81 131 244Dimensions in inchesDimensions in inches Valve Size1/2”15mm3/4”20mm1”25mm1-1/2”40mm2”50mm3”80mm4”100mmBore Size 0.50 0.75 1.00 1.50 2.00 3.00 4.00Face to Face(A)RF 6.50 7.50 8.50 9.50 11.50 14.00 17.00RTJ 6.50 7.50 8.50 9.50 11.62 14.12 17.12Length of Lever (C) 5.90 5.90 8.66 9.84 9.84 13.78 31.50Approx. Weight (lbs.) 10 12 16 31 44 104 176Figure Number B600-1-BC-B2-L, C600-1-BC-B2-L B600-1-LC-B-B2-L, C600-1-LC-B2-LBody/Cap A216 WCB A351 CF8MBall/Stem 316SS 316SSSeats Nylon NylonO-Rings Viton-B Viton-BStandard MaterialsSPLIT BODY FLOATING BALL VALVESize 1.5 Inch FB- 4 Inch RBSize 4 Inch FB- 6 Inch RBSize 3/4 Inch FB- 1 Inch FB
    • GWCValveInternational12Pressure/temperature chartModel A, B, & C Floating Ball ValveThe following chart indicates the pressure and temperature ratings for commonly used seatand seal material used in ASME 150#–600# GWC floating ball valves. Other materials areavailable upon request.ASME 150/3002-1/2”–4” Full Bore, 4” Reduced Bore800700600500400300200100-20 50 150 250 350 450 5500 100 200 300 400 500 600ANSI 150 Body RatingANSI 300 Body RatingPTFERTFEPEEKTemperature – FPressure–psigASME 150/3006” Full Bore, 6”–8” Reduced Bore800700600500400300200100-20 50 150 250 350 450 5500 100 200 300 400 500 600ANSI 150 Body RatingANSI 300 Body RatingPTFERTFEPEEKTemperature – FPressure–psigASME 6001-1/2”–4” Full Bore & Reduced Bore1600140012001000800600400200-20 50 150 250 350 450 5500 100 200 300 400 500 600Temperature – FPressure–psigANSI 600 Body RatingRTFEPTFEDelrinNylonPEEKASME 150/3008” Full bore, 8”–10” Reduced bore (8” FB - 10” RB rated to 350 psig)800700600500400300200100-20 50 150 250 350 450 5500 100 200 300 400 500 600ANSI 150 BodyANSI 300 Body RatingPTFE RTFEPEEKTemperature – FPressure–psigRatingASME 150/3001/2”–2” Full Bore, 1/2”–3” Reduced Bore800700600500400300200100-20 50 150 250 350 450 5500 100 200 300 400 500 600ANSI 150 Body RatingANSI 300 Body RatingPTFERTFEPEEKTemperature – FPressure–psig
    • GWCValveInternational13Terms & Conditions of saleScopeThese terms and conditions apply to all GWC valveproducts, and supersedes all previously publishedterms and conditions.Hereafter, GWC Valve International, Inc. shall bereferred to as GWC.Special terms and conditions printed on a buyer’sorder will only apply insofar as they conform tothe terms and conditions detailed on these pages.Terms and conditions of an order that change ormodify those on this sheet shall not be bindingon GWC.ApprovalAll quotations, contracts, orders, or agreementsare subject to approval and/or acceptance by themain office of GWC.We reserve the right to correct clerical orstenographic errors in quotations, orders, invoices,and other contracts, agreements, or documents.PricesPossession of price lists will not be accepted byGWC as an obligation, or offer to sell the goodslisted therein to anyone.All prices contained therein are subject to changewithout notice, and supersede all previous lists.All orders will be invoiced at prices in effect at thetime of shipment unless quoted in writing.ChangesOrders cannot be cancelled or specifications bechanged without the consent of GWC, and thenonly in terms indemnifying GWC against loss.QuotationsGoods quoted F.O.B. our service center are subjectto prior sale. Prices quoted are valid only forthe duration indicated in the quotation. Quotedprices supersede all previous prices, quotations,or contracts, and are subject to change withoutnotice.CancellationsOrders placed with us cannot be cancelled withoutour prior written consent. A cancellation charge willbe applicable as outlined in our quotation.ClaimsAll claims for shortages, corrections, or deductionsmust be made within 10 days after receipt ofgoods. Responsibility for goods lost or damagedin transit rests with carrier, and claims should befiled with the carrier by the consignee. Delivery ofmaterial to a common carrier shall be considereddelivery to the buyer, and shall be at the buyersrisk thereafter.Delivery DelaysWe assume no responsibility for delays in delivery,or defaults resulting from strikes, work stoppages,fires, floods, accidents, war, inability to obtainmaterials, or any other cause unavoidable andbeyond our control.TaxesGWC quotations and/or contracts do not includeany municipal, state, or federal sales, excise, useoccupational, or other taxes, and any such tax, ifpaid by us will be charged to the purchaser.Catalog IllustrationsCatalog illustrations are actual representationsof a certain size of each product line, but do notnecessarily represent all sizes in details. Wereserve the right to institute changes in materials,designs, and specifications without notice inkeeping with our policy of continuing productimprovement.Catalog WeightsCatalog weights represent average weights ofproducts and are in no sense guaranteed.ReturnsSee Return Goods Policy on next page.Special OrdersOrders for special goods must be in writing andaccompanied with detailed prints and/or setsof specifications, unless specifications on theorders are definite and complete. Orders will notbe entered with the factory unless this is adheredto. Cancellation charges will be as outlined in ourquotations.Freight TermsAll shipments are F.O.B. our service centers. Seecurrent bulletin for freight allowance.WarrantySee warranty on reverse side
    • GWCValveInternational14This policy supersedes all other policies for return goods.I. Goods returned at customers request:A. Material must be:1. Of our manufacture.2. In clean, new and saleable condition. It must have been stored inside out of the weather.3. Shipped from one of our service centers within the 12 calendar months preceding therequest for return, and the return will not cause inventory to exceed maximum allowablelevels.4. Personally inspected by a GWC representative prior to its return.5. Special or non-standard items are non-returnable.B. Return shipments must be prepaid.C. Credit will be allowed at invoice price, less 25% handling cost, and less any freight paid byGWC.D. A Return Goods Card must be furnished by a GWC representative after inspection of the material,and must be returned with the shipment.E. Shipments received without a Return Goods Authorization Card will be refused. Customer willbe responsible for any storage and/or return freight.F. Material returned which is not of GWC manufacture, not in clean and saleable condition, or notauthorized for return will be returned to the customer freight collect. II. Goods returned because of an error by GWC.A. Material must be in a clean, new, saleable condition.B. Return shipment should be made freight collect.C. Full credit will be allowed.D. Customer must receive Return Goods authorization prior to the return of the material. ReturnGoods Authorization Card must accompany shipment. Shipments received without ReturnGoods Authorization Card will be refused. Return Goods Authorization Card should be attachedto the packing list.All requests to return material to GWC Valve International, Inc. must be submitted in writing to our NationalSales Manager for authorization.GWC Valve International, Inc. warrants each product sold, if the products are of our manufacture, againstdefects in material and workmanship under normal use and service for a period of one year after date ofshipment.This warranty is made to the buyer only, and does not extend to any other party. The obligation of GWCValve International, Inc. under this warranty is limited to: (a) replacement of any part or parts proven defectivein material or workmanship, (b) repair of the product F.O.B. the factory or service center, (c) refund of thepurchase price. In the case of product or parts not wholly of GWC’s manufacture, GWC’s liability underthis warranty shall be limited to the extent of GWC’s recovery from the manufacturer of such parts under itswarranty to GWC. This warranty does not extend to any claims for labor, consequential damages, downtime, or any other loss, damage, or expense of any kind arising out of the defect. We do not allow claims forunauthorized repairs, labor, or material. We are not responsible for loss of use, personal injury, lost profits,or any other damages whatsoever in connection with the warranties set forth.No warranty shall apply to any product which has been modified or changed in design or function after leavingGWC’s facilities or which is misused or operated beyond its design capabilities, or used for other than itsintended purpose. Purchasers of GWC products should consult knowledgeable advisors in the selection ofproduct type and material of construction for their specific use. The buyer assumes all risk of this selection.The buyer shall permit GWC or its authorized representative to inspect the product so that it may determineits obligation. GWC shall be entitled to the return of the defective product or parts. Buyer must notifyGWC promptly upon discover of any claimed defect.No material may be returned without first obtaining written permission from GWC Valve International, Inc.Return goods policyWarranty
    • Catalog Number FBV-1001USA HEADQUARTERSGWC Valve International, Inc.4301 Yeager WayBakersfield, CA 93313Ph: 1-661-834-1775Fax: 1-661-834-2072E-Mail: Sales@GWCvalve.comWWW.GWCValve.com