Calling Sametime    Adding telephony to    IBM Connections ?Social Connections IV - 30/11/2012 - Amsterdam
IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and Connections
“What can I do with SametimeUnified Telefony Lite within IBM         Connections”
IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and Connections
What is SUT Lite
Certified equipment                             http://www- 10.lotus.com/ldd/stwiki.nsf/dx/Sametime_Unified_Telephony_Lite...
Architecture
Limitations• Only point-to-point calls• Only Sametime Connect Client is supported• Users cannot dial into a Sametime meeti...
SUT vs. SUT Lite
IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and Connections
AwarenessServer BasedUsing Sametime Proxy ServerClient BasedUsing the Sametime Connect Client
Client requirements• Sametime Client 8.0.2 +• When using SSL:      • Sametime Connect 8.5 +      • Lotus Notes 8.5.1 +• Us...
Check the Client
Server configuration• Open the file profiles-config.xml• Locate the sametimeAwareness element• Set enabled to true• Restar...
The Result
IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and Connections
Start a call
Calling
“What can I do with SametimeUnified Telefony Lite within IBM         Connections”
?
IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and ConnectionsConfiguring SUT Lite
Configure the server   • Install the SUT Lite license   • Enable SUT Lite on the Media Manager     from the System Console...
Enable users   • Enable SIP Trunk capability on the     Media Manager policy
DialplanDial String          SIP endpoint       Phone/Device3118255517X          Sametime           Sametime Softphone316X...
Configure the SIP Proxy   • In the System Console open the     configuration of the SIP Proxies and     Registrars of the ...
Define the rules   Configure the conditions
Define the rulesSet the destination
Define the rules   Example:   Route all calls where the SIP Request URI   starts with “+316” to 192.168.0.214 via TCP
Define the rulesExample:Route all incoming calls from 192.168.0.214to the Media Manager via TCP.
?
Upcoming SlideShare
Loading in...5
×

Calling Sametime, adding telephony to IBM Connections

396

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
396
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
15
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • Wie ben ik, wat doe ik bij Silverside.ADOPTIE STRATEGIE  Volgende slide
  • When I heared what products were included with the IBM Connections Suite I understood most of them. They made sense. The only one that made me wondering was Sametime Unified Telephony Lite. This question will be the guideline through my session today. At the end I hope you can also answer this question.
  • Introduced with 8.5.2Enable the SIP capabilities of Connect (softphone)Audio VideoMake and receive calls
  • Direct SIP connection to the SIP Proxy of the Media ManagerNo additional hardwareNo additional software at clients
  • 2 ways of connectingWhen combined only server based is usedOnlyConnect is support with SUTLite  Client Based
  • For SSL connections additional configuration of the client needs to be doneSSL is automatically used when Connections is accessed via HTTPS (mixed content)When using Lotus Notes the webapi of Connect needs to be enabled
  • HTTP - Port 59449 HTTPS – Port 59669
  • Awareness is only running with Profiles (profiles pages and business cards)When SSL is enabled for Connections, but not for Connect use HTTP for both urls
  • Looking at the Driving Innovation video of the Connections Suite there should be a Call button. It’s not there. Only when using SUT it’s there and working as demonstrated.
  • From my experience there is no real integration. Only for SUT. But having SUT Lite still has added value when used from Connect.
  • Only a few 100K file with an install scriptTLS is fully supported, but it’s recommended to do the initial install without and enable afterwards
  • Usually only INVITEFix available to prevent ST requests to route into the wrong direction
  • “Push a route” to leave the Request URI and add a route field“Replace the Request-URL” to modify the URL. Req. For phonenumbers
  • Not limited to numbering. You can also use names within the SIP Request. Usefull for non-telephony equipment
  • Not limited to numbering. You can also use names within the SIP Request. Usefull for non-telephony equipment
  • Calling Sametime, adding telephony to IBM Connections

    1. 1. Calling Sametime Adding telephony to IBM Connections ?Social Connections IV - 30/11/2012 - Amsterdam
    2. 2. IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and Connections
    3. 3. “What can I do with SametimeUnified Telefony Lite within IBM Connections”
    4. 4. IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and Connections
    5. 5. What is SUT Lite
    6. 6. Certified equipment http://www- 10.lotus.com/ldd/stwiki.nsf/dx/Sametime_Unified_Telephony_Lite_Inter operability_Testing_Program
    7. 7. Architecture
    8. 8. Limitations• Only point-to-point calls• Only Sametime Connect Client is supported• Users cannot dial into a Sametime meeting• NAT traversal is not supported.
    9. 9. SUT vs. SUT Lite
    10. 10. IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and Connections
    11. 11. AwarenessServer BasedUsing Sametime Proxy ServerClient BasedUsing the Sametime Connect Client
    12. 12. Client requirements• Sametime Client 8.0.2 +• When using SSL: • Sametime Connect 8.5 + • Lotus Notes 8.5.1 +• Users must be logged into Sametime from the same machine as where they access Connections and with the same account
    13. 13. Check the Client
    14. 14. Server configuration• Open the file profiles-config.xml• Locate the sametimeAwareness element• Set enabled to true• Restart Profiles
    15. 15. The Result
    16. 16. IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and Connections
    17. 17. Start a call
    18. 18. Calling
    19. 19. “What can I do with SametimeUnified Telefony Lite within IBM Connections”
    20. 20. ?
    21. 21. IntroductionWhat is SUT LiteSametime and ConnectionsSUT Lite and ConnectionsConfiguring SUT Lite
    22. 22. Configure the server • Install the SUT Lite license • Enable SUT Lite on the Media Manager from the System Console • Optional: disable encryption
    23. 23. Enable users • Enable SIP Trunk capability on the Media Manager policy
    24. 24. DialplanDial String SIP endpoint Phone/Device3118255517X Sametime Sametime Softphone316XXXXXXXX FreePBX PBX (soft)phone@mcu.silverside.nl MCU Media Server Video Conferencing
    25. 25. Configure the SIP Proxy • In the System Console open the configuration of the SIP Proxies and Registrars of the Media Server • Open the Proxy Administration
    26. 26. Define the rules Configure the conditions
    27. 27. Define the rulesSet the destination
    28. 28. Define the rules Example: Route all calls where the SIP Request URI starts with “+316” to 192.168.0.214 via TCP
    29. 29. Define the rulesExample:Route all incoming calls from 192.168.0.214to the Media Manager via TCP.
    30. 30. ?
    1. A particular slide catching your eye?

      Clipping is a handy way to collect important slides you want to go back to later.

    ×