0
Important Information and
                                                                                                ...
Controls, Indicators                                                                                                      ...
Main Icons
                   Introduction
                                              Contents
                        ...
Your Detector
                                Installation                                                     Your Detect...
Your Detector
                                Installation                                                                ...
Your Detector
                                    Settings                                                       Your Dete...
Your Detector
                                Settings                                                                  Yo...
Your Detector
                                                   Settings                                                 ...
Your Detector
                                           Settings                                                         ...
Your Detector
                                Settings                                                                 You...
Xrs9345 Manl
Xrs9345 Manl
Xrs9345 Manl
Xrs9345 Manl
Xrs9345 Manl
Upcoming SlideShare
Loading in...5
×

Xrs9345 Manl

569

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
569
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "Xrs9345 Manl"

  1. 1. Important Information and Introduction Customer Assistance Intro Operation Customer Warranty Important Information Assistance • Federal Laws Governing the Use of Radar Detectors It is not against federal law to receive radar transmissions with your Cobra radar/ laser detector. The Communications Act of 1924 guarantees your right to receive radio Secondary Icons transmissions on any frequency. Local laws that contravene this Act, while illegal, may be enforced by your local law enforcement officials until and unless they are prohibited from doing so by federal court action. Operating Instructions Safety Alert Use of this product is not intended to, and does not, ensure that motorists or passengers will not be involved in traffic accidents. It is only intended to alert Notice the motorist that an emergency vehicle equipped with a Cobra Safety Alert transmitter is within range as defined by that product. Please call local fire and police departments to learn if coverage exists in your area. The Cobra line of quality products includes: Safe Driving Motorists, as well as operators of emergency or service vehicles, are expected to exercise all due caution while using this product, and to obey all applicable traffic laws. Security of Your Vehicle Main Icons CB Radios Before leaving your vehicle, always remember to conceal your radar detector in order to reduce the possibility of break-in and theft. microTALK® Radios Radar/Laser Detectors Customer Assistance Intro Operation Customer Warranty Safety Alert® Traffic Warning Systems CustomerAssistance Assistance • Should you encounter any problems with this product, or not understand its many features, Mobile GPS Navigation Systems please refer to this owner’s manual. If you require further assistance after reading this manual, Cobra Electronics offers the following customer assistance services: HighGear® Accessories Secondary Icons For Assistance in the U.S.A. Automated Help Desk English only. 24 hours a day, 7 days a week 773-889-3087 (phone). ® CobraMarine VHF Radios Customer Assistance Operators English and Spanish. 8:00 a.m. to 6:00 p.m. Central Time Marine Chartplotters 14 BAND™ Mon. through Fri. (except holidays) 773-889-3087 (phone). HIGH-PERFORMANCE Questions English and Spanish. Faxes can be received at 773-622-2269 (fax). Power Inverters DIGITAL RADAR/LASER Notice DETECTOR WITH XTREME RANGE Technical Assistance English only. www.cobra.com (on-line: Frequently Asked Questions). English and Spanish. productinfo@cobra.com (e-mail). Accessories SUPERHETERODYNE® TECHNOLOGY For more information or to XRS 9345 order any of our products, For Assistance Outside the U.S.A. ©2009 Cobra Electronics Corporation please visit our website: Printed in China Contact Your Local Dealer 6500 West Cortland Street Chicago, Illinois 60707 USA Part No. 480-488-P www.cobra.com Version A www.cobra.com A1 English Nothing Comes Close to a Cobra® English Nothing Comes Close to a Cobra® English
  2. 2. Controls, Indicators Accessories Order Info and Introduction and Connections Introduction Display and Product Features Customer Assistance Trademark Acknowledgement Secondary Icons Intro Operation Customer Warranty Intro Operation Customer Warranty Intro Operation Customer Warranty Assistance Controls, Indicators and Connections Assistance • Display Assistance • Ordering From U.S.A. Call 773-889-3087 for pricing or visit www.cobra.com. NOTE: In This Manual For Credit Card Orders Secondary Icons Windshield Bracket Windshield Bracket X K Ka V S Secondary Icons L Notice When steady, the display will X K Ka V S c Secondary Icons Call 773-889-3087 [Press one from the main menu] 8:00 a.m. to 6:00 p.m. Central Time, Monday through Friday. Release Button Mount be shown: Make Check or Money Order Payable To Cobra Electronics, Attn: Accessories Dept., Radar, VG-2, Signal IntelliMute When blinking, 6500 West Cortland Street, Chicago, IL 60707 U.S.A. LaserEye Spectre I & IV+ and Strength, Indicator the display will X K Ka V S c For 360° detection Safety Indicators Pop, Laser, be shown: To Order Online of laser signals. City/Highway and Please visit our website: www.cobra.com. Notice Notice IntelliMute Pro Notice X & K will light Mode Indicators simultaneously X K Ka V S c Audio Jack Signal Strength: 1 (weakest) to 5 (strongest) Item # Description when indicating Ku detection: 420-030-N-001 Straight 12V Power Cord Speaker Product Features • 420-026-N-001 Coiled 12V Power Cord Congratulations! You’ve made a smart choice by purchasing a high 545-159-N-001 Windshield Mounting Bracket performance radar/laser detector from Cobra. Just look at some of the CLP-2B Dual Port Power Adapter sophisticated features and capabilities your new unit includes: Xtreme Range UltraBright Data Display Superheterodyne Technology Easy-to-read with adjustable brightness 12V DC With super-fast sweep circuitry, City or Highway Power Jack XRS provides extra detection range Modes to reduce false alerts and the best possible advance warning Trademark Acknowledgement to even the fastest radar guns Alert Programming • On-Off/ Volume Control Easy setting of radar bands to be monitored Cobra®, DigiView®, EasySet®, Extra Sensory Detection®, IntelliMute®, IntelliMute Pro®, Detection and Separate Alerts For: IntelliShield , LaserEye , Nothing Comes Close to a Cobra , Safety Alert Traffic Warning ® ® ® ® Allows you to adjust the Main Icons Safety Alert volume of the tone alerts. City Button Radar signals (X, K, Ka and Ku bands, System, Strobe Alert®, VG-2 Alert®, Xtreme Range Superheterodyne® and the snake design with signal strength indicated), Laser Traffic warning system distinguishes are registered trademarks of Cobra Electronics Corporation, USA. Dim Button For City or Highway important safety alerts from other modes to reduce signals, Safety Alert signals, VG-2 Cobra Electronics Corporation™, 14 Band™, 15 Band™, Extreme Bright DataGrafix™, Allows you to adjust the UltraBright K band signals Data Display brightness for easy false alerts. (Also signals, Spectre I & IV+ signals IntelliLink™, Revolution™ Series, SmartPower™, Spectre Alert™, Super-Xtreme Range reading. (Also turns VG-2 and turns Ku alerts On LaserEye Manual Mute or Auto Mute Superheterodyne™, S-XRS™, UltraBright™, and Voice Alert™ are trademarks of Cobra Spectre I & IV+ alerts On and Off.*)Intro and Off.*) A mute function of audio alerts Electronics Corporation, USA. Operation Customer Assistance Warranty For 360° detection of laser signals IntelliMute Button Mute Button Instant-On Ready IntelliMute Opticom™ is a trademark of 3M Corporation. Instaclear® for Ford is a registered Engine RPM sensing mute function For manual mute or Detects radar guns with “instant-on” A mute function reduces false audio alerts trademark of Ford Motor Company, Inc. Electriclear® for GM is a registered trademark of which reduces false alerts. Button auto mute of audio alerts. by sensing engine RPMs General Motors Corporation. 20-20™ and Ultra-Lyte™ are trademarks of Laser Technology, turns IntelliMute On and Off. (Also (very fast) speed monitoring capabilities Inc. ProLaser™ and ProLaser III™ are trademarks of Kustom Signals, Inc. Bee III™ and enters IntelliMute setting mode. ) Secondary Icons * Pop Detection IntelliMute Pro Pop™ are a trademarks of MPH Industries. Stalker™ LIDAR is a trademark of Applied Detects the latest super-fast instant-on Prevents detection by radar detector detectors Concepts, Inc. Spectre I™ and Spectre IV+™ are trademarks of Stealth Micro Systems Pty. Ltd. single pulse radar guns (RDDs) when traveling at slower speeds SpeedLaser™ is a trademark of Laser Atlanta, LLC. Interceptor VG-2™ is a trademark of WARNING Tone Alerts Mounting TechniSonic Industries LTD. Tomar® is a registered trademark of TOMAR Electronics, Inc. * Press and hold for four seconds Modifications or parts substitutions not approved Mounts easily on windshield or dashboard to access these functions. by Cobra Electronics Corporation may violate With adjustable volume Notice FCC Rules and void your authority to operate This booklet describes the simple steps for mounting and setting up your detector. It also provides helpful this equipment. information about how radar and laser guns are used and how you can interpret the alerts you receive. A2 English Nothing Comes Close to a Cobra® A3 Nothing Comes Close to a Cobra® 25
  3. 3. Main Icons Introduction Contents Intro Operation Customer Warranty Assistance Introduction Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1 Intro Customer Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1 Operation Customer Warranty Assistance SecondaryControls, Indicators and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2 Icons Main Icons Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3 Your Detector Secondary Icons Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Notice Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Intro Operation Customer Warranty Auxiliary Audio Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Assistance Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Highway/City Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 UltraBright Data Display Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Notice Muting an Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Secondary Icons Auto Mute Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 IntelliMute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 IntelliMute Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 VG-2 and Spectre I & IV+ Alert Settings . . . . . . . . . . . . . . . . . . . . . . . . . 13 Pop Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Notice Radar Alert Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Signals Detected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Audio Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Visual Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Instant-On Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Responding to Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Understanding Radar and Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Warranty Limited 1-Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Customer Warranty Assistance Customer Assistance Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Operation Customer Warranty Assistance Accessories Order Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Trademark Acknowledgement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Nothing Comes Close to a Cobra® 1
  4. 4. Your Detector Installation Your Detector Installation Intro Operation Customer Warranty Intro Operation Customer Warranty Installation Assistance • Windshield Mounting Assistance Where to Mount Your Unit You will get optimum performance from your detector if you Mount it at a 1. Attach the rubber point approximately in the center of the vehicle, as low as possible on the Secondary Icons Secondary Icons cups to the bracket. front windshield without obstructing the unit’s view of the road either to the front or rear. Make sure unit is level with the road. You can also mount it directly on the dashboard. 2. Make sure the rubber cups and your windshield are clean. Windshield Mounting Dashboard Mounting 3. Push the bracket firmly Notice Notice onto the windshield. 4. Attach the detector to the bracket. Check the angle of the unit. The unit’s lens must not be blocked and the LaserEye should have a clear view out the back window to allow 360° detection. 5. To adjust the angle if necessary, gently push or The LaserEye Should Have a Clear View pull on the bracket to bend it. DO NOT use the detector to bend the bracket. 6. Plug the power cord into the detector. Radar and laser signals pass through glass but not through other materials 7. Plug the cigarette lighter and objects. Objects that can block or weaken incoming signals include: adapter on the power cord into your vehicle’s s Windshield wiper blades cigarette lighter. s Mirrored sun screens 8. You can temporarily remove the detector whenever you s Dark tinting at the top of the windshield wish by pressing the bracket release button and sliding s Heated windshields currently available on some vehicles it off the bracket. (Instaclear for Ford, Electriclear for GM.) Consult your dealer to see if you have this option. 2 English Nothing Comes Close to a Cobra® 3
  5. 5. Your Detector Installation Your Detector Getting Started Intro Operation Customer Warranty Intro Operation Customer Warranty Dashboard Mounting Assistance Getting Started Assistance • Power On 1. Place the detector on the dashboard to find a location Secondary Icons where the unit has a clear, level view of the road. X K Ka V S Secondary Icons h The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one side of the hook- and-loop fastener. On-Off/ W arn ing Main Icons Notice Volume Control Notice Ca uti on Rotate clockwise No tic e 3. Attach the pad to the (away from you) ce tan r sis me As sto dashboard at your chosen ty W arr an Cu tall ati on ns location and remove the ce Ins Ico tan r nd ary sis me co As sto Se Cu other paper backing. Intro Operation To Turn On the Warranty and Adjust the Audio Volume Customer Assistance Unit Op era tio n o Intr Rotate the On-Off/ Tone Visual Display Volume control clockwise (away Three beeps ns h appears in the display indicating that the power Ico in Ma Secondary Icons from you). is On 4. Attach the detector to the NOTE hook-and-loop fastener. You can remove and In some vehicles, power is supplied to the cigarette lighter even while the reattach the unit as Notice ignition is Off. If this is the case with your vehicle, you should turn Off often as you like. or unplug your detector when parking for lengthy periods. 6. Plug the power cord into the detector. Auxiliary Audio Jack • The Auxiliary Audio Jack can be used to connect external speakers in environments with high ambient noise levels. The internal speaker will be disconnected. (This uses a mini stereo audio connector.) 7. Plug the cigarette lighter adapter on the power cord into your vehicle’s cigarette lighter. Auxiliary Audio Jack 4 English Nothing Comes Close to a Cobra® 5
  6. 6. Your Detector Settings Your Detector Settings Intro Operation Customer Warranty Intro Operation Customer Warranty Settings Assistance • UltraBright Data Display Brightness Assistance When changing the Settings on your detector, please keep in mind: You can choose from three settings for Brightness of the display. You can cycle through the settings by repeatedly pushing the Dim button. s Buttons can have multiple functions. The factory setting is Bright. Secondary s Icons All settings will be stored in memory when the power is Secondary Icons turned Off and recalled when the power is turned back On. Highway/City Mode Bright Setting your detector to City mode delays all X band audio alerts until the signal Notice strength reaches Level 3. (A single beep will sound when the Press and Notice signal is first detected.) This will reduce false alerts while you are driving Dark release Dim button in, or near, urban areas where there are many sources for conflicting X band signals such as microwave towers and automatic door openers. Dim To change settings, follow the procedure listed below, which indicates Dim Button what you will see and hear as you complete each step. The factory setting Press and release is Highway mode. City Button Press and To Change the Brightness to Dim Highway Mode release Press and release Tone Visual Display the Dim button X K Ka V S h once. One beep Display dims City Mode To Change the Brightness to Dark X K Ka V S c Press and release Tone Visual Display the Dim button One beep Display remains dim again. (no visual alerts will be seen) To Change From Highway Mode to City Mode Press and release Tone Visual Display To Change the Brightness to Bright the City button. One beep c appears in the display Press and release Tone Visual Display the Dim button a Two beeps Display returns third time. to full brightness To Change From City Mode Back to Highway Mode Press and release Tone Visual Display the City button again. Two beeps h appears in the display 6 English Nothing Comes Close to a Cobra® 7
  7. 7. Your Detector Settings Your Detector Settings Main Icons Intro Operation Customer Warranty Intro Operation Customer Warranty Muting an Alert Assistance IntelliMute Assistance Your detector allows you to quickly turn Off an audio Alert by momentarily IntelliMute is a unique feature that allows you to avoid alerts you don’t need pressing the Mute button. If you press the Mute button a second time to hear because you are stopped or moving slowly. By sensing the “revs” during the Alert, the audio Alert will be turned back on. Intro (RPMs) Assistance engine, IntelliMute knows when you are at low speed and Operation of your Warranty Customer Secondary Icons automatically mutes audio radar alerts. Secondary Icons Auto Mute Mode Before IntelliMute will work, you must set an activation point for your engine’s Auto Mute will automatically reduce the audio volume of all alerts revs (see page 10). Whenever the revs are below that point, IntelliMute will after four seconds for as long as the signal is detected. The factory Secondary Icons begin muting. The activation point will be stored in memory and recalled setting for Auto Mute is on. each time the power is turned on. The factory setting is IntelliMute Off. Notice Notice NOTE Notice IntelliMute may not work with some vehicles because it cannot sense the engine’s revs. In such cases, you can reduce unwanted audio alerts by using Auto Mute and City mode when appropriate. Mute Button Press and release IntelliMute Button To Turn Auto Mute On Press and release Press and release Tone Visual Display the Mute button Two beeps None To Turn IntelliMute On again while no alert is occurring. Press and release Tone Visual Display the IntelliMute Two beeps Dot appears next to the large button. To Turn Auto Mute Off character on the right Press and release Tone Visual Display the Mute button To Turn IntelliMute Off One beep None while no alert is occurring. Press and release Tone Visual Display the IntelliMute One beep None button again. 8 English Nothing Comes Close to a Cobra® 9
  8. 8. Your Detector Settings Your Detector Settings Intro Operation Customer Warranty Intro Operation Customer Warranty What to Remember While Using IntelliMute Assistance Assistance IntelliMute Button IntelliMute works with both City and Auto Mute modes. Press and hold for Whenever your engine revs are below the activation point, the dot next two seconds in Icons to the large character on the right side of the display will remain lit. Secondary Icons Secondary Icons Above the activation point, the dot will blink twice every two seconds. To Set the IntelliMute Activation Point Below Activation Point Above Activation Point Press and hold Tone Visual Display in Icons the IntelliMute Two beeps None Main Icons X K Ka V S c X K Ka V S c button for two Main Icons Intro Operation Customer Warranty Assistance Notice seconds. Notice Intro Operation Customer Warranty Assistance If, for any reason, the unit stops sensing your engine’s revs, Rev yourMain Icons to engine None Three bars will Intro Operation Customer Assistance Warranty IntelliMute will indicate an error and automatically turn Off. the level you wish flash in succession Customer Installation Intro Operation Customer Warranty to set (recommend Assistance condary Icons The rev Assistance you set will be stored in the unit’s memory when point slightly above idle) 1 Secondary Icons 2 Installation Customer Assistance Secondary Icons 3 power is turned Off and recalled each time the power is turned On. and hold revs steady Main Icons Main Icons Notice Caution Warning for two seconds. Notice Caution Warning Intro Operation Customer Warranty NOTE At the desired Three beeps Assistance All three bars flash Intro Operation Customer Intro Assistance Warranty Operation Customer Assistance Warranty condary Icons The rev point must be reset if you use your detector in a different vehicle. rev level, press three times Notice and release the 1 2 Installation Customer Assistance 3 Installation Customer Assistance NOTE IntelliMute Secondary Icons Secondary Icons button. Secondary Icons When initially choosing your IntelliMute activation point, a setting Notice Caution Warning Notice Caution Warning Notice of approximately 300 to 600 RPMs above idle is recommended. Operation Customer Warranty Assistance You can reset the activation point at any time to fit your individual preferences and driving style. NOTE Notice If the unit is unable to sense usable pulses within Setting the IntelliMute Activation Point three seconds or if you do not set a rev point within Customer Installation Assistance 20 seconds of beginning these steps, IntelliMute will Your detector must be installed in your vehicle. indicate an error and automatically turn Off. CAUTION Tone Visual Display Do not attempt to set the rev point while driving. Notice Caution Your vehicle should be parked and idling. Warning Four beeps E appears IntelliMute must be turned on before setting the activation point. You will hear a series of beeps as you follow the steps on the next page. X K Ka V S E 10 English Nothing Comes Close to a Cobra® 11
  9. 9. Your Detector Settings Your Detector Settings Intro Operation Customer Warranty Intro Operation Customer Warranty IntelliMute Pro Assistance VG-2 and Spectre I & IV+ Alert Settings Assistance IntelliMute Pro prevents detection by radar detector detectors (RDDs) such as Police use radar detector detectors (RDDs) to spot users of radar detectors. VG-2, Spectre I and Spectre IV+ when traveling at slower speeds. It is intended Your detector is able to identify signals from VG-2, Spectre I and Spectre IV+ for use by experienced users only. RDDs and can provide alerts when any of these or similar devices are in use OperationSecondary Icons Customer Warranty Secondary Icons your vehicle. near When IntelliMute Pro is turned On, and engine RPMs are below the IntelliMute Assistance activation point, your detector’s radar detection circuits are turned Off to prevent Your detector can be spotted by Spectre IV+ RDDs, but is invisible to VG-2 and detection by RDDs. Spectre I RDDs. You can choose whether you want to be alerted to VG-2 and Installation Customer Before IntelliMute Pro can be turned On, you must have turned On and Set the Assistance Spectre I & IV+ RDD signals. The factory setting for VG-2 and Spectre I & IV+ IntelliMute activation point. (See pages 9 through 11.) alerts is Off. Notice Notice On/Off Indicator CAUTION Dim Button When IntelliMute Pro is On, NO radar signals will be detected and X K Ka V S c Press and hold Notice Caution NO alerts will be given at RPMs below the IntelliMute activation point. Warning for four seconds To Turn VG-2 and Spectre I & IV+ Alerts On and Off IntelliMute Button City Button While no signal is being Tone Visual Display Press and hold both detected, press and buttons simultaneously On = Two beeps V will blink twice in the display hold the Dim button IntelliMute Pro On for four seconds. Off = One beep V will blink once in the display X K Ka V S c Pop Alert The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses To Turn IntelliMute Pro On a single, short-time pulse to measure the target vehicle’s speed. While no signal Tone is being detected, Visual Display The Pop mode receiver senses Pop singles beyond the effective range of press and hold both Pop radar guns. As the Pop mode receiver is so sensitive, you should limit Two beeps c or h will blink the use of Pop Detect mode to highway and rural driving. the IntelliMute and City buttons for Pop Alert will alert you to Pop radar signals. During the alert, the unit four seconds. continues to detect other signals. The factory setting is Pop Detect Off. To Turn IntelliMute Pro Off To Turn Pop Alert On and Off Press and hold both Tone Visual Display While no signal is Tone Visual Display the IntelliMute and being detected, press One beep c or h will show steady Pop On = Two beeps P will blink twice in the display City buttons for and hold both the four seconds. Dim and City buttons for four seconds. Pop Off = One beep P will blink once in the display 12 English Nothing Comes Close to a Cobra® 13
  10. 10. Your Detector Settings Your Detector Detection Intro Operation Customer Warranty Intro Operation Customer Warranty Radar Alert Settings Assistance Detection Assistance • The detector allows you to choose whether it will show alerts on the X, K and Signals Detected Ku bands. The factory settings are: X Band and K Band On; Ku Band Off. The tables on the following pages show you the types of Signals your To Turn X Band On and Off Secondary Icons detector will detect, as well as the visual alerts it provides for each of them. Secondary Icons While no signal is Tone Visual Display being detected, press Audio Alerts and hold both the X On = Two beeps X will blink twice in the display A distinctly different Alert tone is used for each type of signal detected Dim and Mute buttons (including separate tones for each laser signal). For X, K, Ka and Ku band for four seconds. X Off = One beep X will blink once in the display radar signals, the tones will repeat faster as you approach the signal Notice Notice source. The repeat rate of the tones gives you useful information about To Turn K Band On and Off the signal detected. (See responding to alerts on page 18.) While no signal is Tone Visual Display being detected, press Visual Display and hold both the K On = Two beeps K will blink twice in the display An indication of the type of signal detected will appear in the UltraBright Mute and City buttons for four seconds. K Off = One beep K will blink once in the display data Display. During X, K, Ka and Ku alerts, a number will also appear, indicating the strength of the signal detected. (1 = weakest, 5 = strongest) To Turn Ku Band On and Off X Signal Detected K Signal Detected Ka Signal Detected Ku Signal Detected While no signal is Tone Visual Display being detected, press X K Ka V S 2 X K Ka V S 3 X K Ka V S 5 X K Ka V S 4 and hold the City Ku On = Two beeps X and K will blink twice in the display button for four seconds. Ku Off = One beep X and K will blink once in the display POP Signal Detected Laser Signal Detected During pop alerts, the letter P will appear; and during laser alerts, the letter L will appear, instead of X K Ka V S P X K Ka V S L the signal strength indication. VG-2 Alert Signal Spectre I or IV+ Alert During VG-2 or Spectre I or IV+ Detected Signal Detected alerts, the letter V will appear. It will be steady during VG-2 X K Ka V S c X K Ka V S c and blink during Spectre I or IV+. Safety Alert Signal Detected During Safety Alert the letter S will appear. X K Ka V S c 14 English Nothing Comes Close to a Cobra® 15
  1. A particular slide catching your eye?

    Clipping is a handy way to collect important slides you want to go back to later.

×