Page 1
Nu-Glaze Specifications – Technical data
Product Specifications:
DESCRIPTION: RX320 is an unplasticised UV resistan...
Property Unit Value
Colours Visual Clear, white, black, grey & bronze
Hardness Shore A 20
Tensile strength MPa 1.0
Density...
Upcoming SlideShare
Loading in …5
×

Nu glaze specifications – technical data

699 views
634 views

Published on

http://www.nu-glaze.co.za/ Technical specifications for Nu-Glaze product

Published in: Devices & Hardware
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
699
On SlideShare
0
From Embeds
0
Number of Embeds
499
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Nu glaze specifications – technical data

  1. 1. Page 1 Nu-Glaze Specifications – Technical data Product Specifications: DESCRIPTION: RX320 is an unplasticised UV resistant PVC compound and will be supplied as a standard formulation as confirmed by infra-red spectroscopy. This grade is designed for the production of Rigid Profiles and depending on the processing, installation and environmental conditions could last up to 5 years. However, should these profiles be exposed to certain gasses and chemicals premature cracking and discoloration could occur. APPLICATION: Outdoor Profiles PHYSICAL PROPERTIES PROPERTY TYPICAL VALUE UNITS Density 1.47 g/cm³ Shore D 84 - Tensile strength 40 Mpa Elongation 25 % Impact strength 220 KJ/m² Softening point 84 °C
  2. 2. Property Unit Value Colours Visual Clear, white, black, grey & bronze Hardness Shore A 20 Tensile strength MPa 1.0 Density g/cm³ 0.99 Tooling time Minutes 8 Tack free time Minutes 15 (23°C @ 50% humidity) Elongation at break % 500 (glass substrate) Application temperature °C +5 to +40 Temperature resistance °C -50 to +100 Sag mm <2 (ISO 7390) Application rate g/minute 230 (6mm orifice, 2 Bar pressure) Values listed are indicative and should not be used as specifications  Low modulus  Fast curing  Excellent adhesion to vinyl, wood, steel and aluminum  Superior back bedding sealant as well as cap, toe or heel beads for doors or windows  Tested in accordance with ISO11.600F + G25LM specifications Page 2 Specifications for Silicone sealer to be used: NU-GLAZE 600 is a fast cure, low modulus silicone sealant which cures with atmospheric moisture to form a highly elastic rubber seal providing excellent performance in glazing and construction applications. NU-GLAZE 600 is unaffected by high or low temperatures and has outstanding weathering and UV resistance. It is recommended for use in building joints and glazing applications.

×