Datasheet - Oil And Gas

  • 220 views
Uploaded on

Fine Tubes’ oil and gas tubing are used in the most challenging subsea and downhole conditions in seawater and sour oil well environments. Materials used are Austenitic, Super Austenitic, Duplex, …

Fine Tubes’ oil and gas tubing are used in the most challenging subsea and downhole conditions in seawater and sour oil well environments. Materials used are Austenitic, Super Austenitic, Duplex, Super Duplex, Titanium and Nickel Alloys. Seamless tubes are used for hydraulic tube and instrumentation tube applications, in onshore control panels, topside processing facilities, on subsea manifolds and templates up to 2,500m below the sea’s surface. Seam welded & redrawn tubes with orbital joints are used for subsea umbilicals, subsea control lines and chemical injection tubes. We can produce straight tubes or tube coils up to 10,000 m long. Coiled tubing is also used in onshore or topside hydraulic and instrumentation systems where the longer coils result in fewer connections and can increase the integrity of the overall system. These high pressure tubes need to be able to withstand huge amounts of pressure which is why our stainless steel coils for onshore applications are rated for use up to 60,000psi.

  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
    Be the first to like this
No Downloads

Views

Total Views
220
On Slideshare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
3
Comments
0
Likes
0

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. e 102 - September 2011 Datasheet Experience www.finetubes.comoil & gas The Oil & Gas sector represents one of Fine Tubes principal markets for supply of a wide range of tubular product forms and materials. Our products have been successfully applied in some of the most aggressive subsea and downhole conditions and we have a long proven track record of supplying products that meet the strict quality requirements of the oil and gas sector. Fine Tubes offers coiled and straight length tubing in a wide range of corrosion resistant stainless steels, titanium alloys and nickel alloys. We have extensive experience in product supply and innovation in this sector, from the technological advances required for subsea developments in the 1970s up to the deepwater challenges of the day. Applications Our products are used in the following applications: Coiled Tubing ● Steel tube umbilicals ● Downhole control lines ● Chemical injection lines ● Smooth bore tubing ● Flow line bundle control line tubing ● Downhole gauge cables with single and twisted pair conductors Straight Length Tubing ● Control & instrumentation - up to 150,000 psi service rating ● High strength pressure housings ● Hydraulic & chemical injection lines ● Stainless steel, nickel alloys and titanium seamless and seam welded tube Size Range SWG 6.35 0.25 3 4.77 0.188 6 Straight Lengths 3.25 0.125 10 1.63 0.064 16 coils & straight lengths 0.80 0.032 Coils & Straight Lengths 21 0.56 0.022 24 0.38 0.016 27 0.23 0.009 34 mm ins mm 0 0.4 1.6 3.2 4.8 6.4 8.0 12.7 19.0 25.4 27.0 30.0 35.0 45.5 50.4 55.6 63.2 wall OD ins 0 1/64 1/16 1/8 3/16 1/4 5/16 1/2 3/4 1 1 1/16 1 3/16 1 3/8 1 3/4 2 2 1/4 2 1/2 www.finetubes.com
  • 2. e 102 - September 2011 Datasheet Production Facilities www.finetubes.com ● Cold pilger millsoil & gas ● Cold draw benches ● Tube welding mills - In-line weld mills ● Controlled atmosphere heat treatment ● Bright anealing ● Pickling & passivation plant ● NDT ultrasonic & eddy current testing ● Hydrostatic testing ● Radiographic examination Supply Forms Coiled Tubing Coiled seam welded or welded and drawn tubing is available in standard materials including stainless steel 316L, lean and superduplex stainless steel and nickel alloys 825, 625 and 400. Other materials are also available on request. Information on burst, yield and collapse pressures for the various materials are also available on request. Tubing can be supplied in the annealed or cold worked condition. ● Seamless and welded, welded and drawn tubing ● Welded floating plug drawn for higher quality tube ● Diameters from 3 mm (0.118") to 25.4 mm (1") OD ● Wall thicknesses from 0.5 mm (0.020") to 3 mm (0.118") ● Coils up to 1,500 m (5,000 ft) without orbital joints ● Coils up to 13,500 m (45,000 ft) with orbital joints ● Encapsulated, PVC coated or bare line tubing ● Gauge cable - TEC ● Impulse lines ● Available on wooden or steel drums Straight Lengths Straight length tubing can be manufactured in a wide range of stainless steels, superduplex stainless steels, titanium grades and nickel alloys. The tubing can be supplied in a range of conditions including annealed, age hardened, cold worked or stress relieved. ● Seamless tubes up to 11 m (36 ft) long ● Outside diameters from 0.3 mm (0.01") to 63.5 mm (2.5") ● Controlled wall, OD/ID precision tolerances ● Manufactured to industry or customer specifications ● High / Super pressure tubing ● Surface conditions include bright annealed, pickled, passivated, polished or ground ● PVC coated tubing www.finetubes.com
  • 3. Chemical Analysis % Density Tensile Rm (min) Yield Rp 0.2% (min) Elong. ALLOY Werk- Hardness Temper % Application UNS No. stoffe HV C Mn Ni Cr Fe Mo Ti Nb N Al Other g/cm³ lb/in³ ksi MPa ksi MPa min 2.0- 316L 1.4404 0.035 2.0 10.0- 16.0- Standard oil and gas CRA. bal 2.5 7.93 0.286 ANN 70 485 25 170 35 200 max S31603 max max 13.0 18.0 1.4435 2.5-3 316L with minimum olybdenum content of 2.5%. m Austentitic stainless steel with addition of 0.5% Ti 316Ti 0.080 2.0 10.0- 16.0- 2.0- 5XC+N 0.10 1.4571 bal 7.93 0.286 ANN 70 485 25 170 35 200 max to mprove alloy stability at temperatures above i S31635 max max 14.0 18.0 3.0 -0.700 max 800°C. 317L 0.035 2.0 11.0- 18.0- 3.0- Austentic stainless steel with higher corrosion 1.4438 bal 7.9 0.29 ANN 75 515 30 205 35 200 max S31703 max max 15.0 20.0 4.0 resistance then 316L. 904L 0.020 2.0 23.0- 19.0- 4.0- Cu Stainless steel with higher resistance to general, 1.4539 bal 8 0.289 ANN 70 485 40 275 35 200 max N08904 max max 28.0 23.0 5.0 1.0-2.0 pitting & crevice corrosion than 316L. 6Mo 0.020 1.0 17.5- 19.5- 6.0- 0.18- Cu Super-austenitic stainless steel with good resistance 1.4547 bal 8 0.289 ANN 98 675 45 310 35 230 max S31254 max max 18.5 20.5 6.5 0.22 0.5-1.0 to pitting and crevice corrosion. Duplex 0.030 2.0 4.5- 21.0- 2.5- 0.08- High mechanical strength and good resistance to 1.4462 bal 7.8 0.281 ANN 90 620 65 450 25 290 max S31803 max max 6.5 23.0 3.5 0.20 localised cracking & chloride stress corrosion. Super Duplex 0.030 1.2 6.0- 24.0- 3.0- 0.24- Cu 0.5 1.441 bal 7.79 0.28 ANN 116 800 80 550 15 310 max S32750 max max 8.0 26.0 5.0 0.32 max Superduplex alloy combining excellent strength with good corrosion resistance in high chloride and Super Duplex 1.0 6.0- 24- 3.0- 24- Cu 0.50 seawater environments. 1.4501 0.020 bal 7.70 0.278 ANN 109 750 73.5 507 35 310 max S32760 max 8.0 26 4.0 32 W 0.50 7.880 0.285 ANN 100 690 55 380 35 285 max Nitrogen strengthened austenitic grade with N50 0.060 4.0- 11.5- 20.5- 1.5- 0.1- 0.2- V 0.1- 1.3964 bal exceptional strength in the cold worked condition & S20910 max 6.0 13.5 23.5 3.0 0.3 0.4 0.3 low magnetic permeability. 7.450 0.270 CW 170 1170 150 1034 20 528 max Alloy 800H 0.05- 1.5 30.0- 19.0- 39.5 0.15- 0.15- Cu 0.75 High temperature strength and excellent corrosion 1.4876 8.08 0.292 ANN 75 517 30 207 30 200 max N08810 0.10 max 35.0 23.0 min 0.60 0.60 max resistance in petrochemical environments. Alloy 825 0.05 1.0 38.0- 19.5- 2.5- 0.6- 0.20 Cu Very good sour well and chloride stress corrosion 2.4858 bal 8.1 0.292 ANN 85 586 35 241 30 209 max N08825 max max 46.0 23.5 3.5 1.20 max 1.5-3.0 cracking resistance. Alloy 718 0.08 0.4 50 .0- 17.0- 2.80- 0.65- 4.75- 0.20- Co 1.0 Age hardenable, high strength nickel alloy with 2.4668 bal 8.19 0.296 HT 150 1084 120 827 20 382 max N07718 max max 55.0 21.0 3.30 1.15 5.50 0.80 max good sour well corrosion resistance. Fine Tubes Grade Chart Gr 1 ANN 120 827 60 414 30 260 maxAlloy 625 0.10 0.5 20.0- 5.0 8.0- 0.40 3.15- 0.40 Nickel alloy with very good resistance to pitting, 2.4856 bal 8.44 0.305 SLN N06625 Gr 2 max max 23.0 max 10.0 max 4.15 max 100 690 40 276 30 222 max crevice corrosion & sour well environments. ANN Alloy 276 0.02 1.0 14.5- 4.0- 15.0- W 3.0- 2.4819 bal 8.9 0.321 ANN 100 690 41 283 40 210 max Excellent sour service corrosion resistance. N10276 max max 16.5 7.0 17.0 4.5 Alloy 22 0.015 0.5 20- 2.0- 12.5- W 2.5- Excellent sour service corrosion resistance 2.4602 bal 8.61 0.311 ANN 100 690 45 310 45 270 max N06022 max max 22.5 6.0 14.5 3.5 combined with a very high pitting index. Alloy 59 0.010 0.5 22.0- 1.5 15.0- 0.10- Co 0.3 Excellent in Sour Service Environments. Highly e 102 - oil & gas 2.4605 bal 8.60 0.311 ANN 100 690 45 310 45 270 max N06059 max max 24.0 max 16.5 0.40 max resistant to Chloride, Sea Waters and Acids. MP35N 0.03 0.2 33.0- 19.0- 1.0 9.0- 1.0 Nickel cobalt alloy with very high strength, Co bal 8.43 0.304 HT 220 1514 200 1380 10 528 max R30035 max max 37.0 21.0 max 10.5 max toughness and outstanding corrosion resistance. Alloy 400 0.30 2.0 63.0- 2.5 General purpose Ni alloy with a good combination 2.436 Cu bal 8.83 0.319 ANN 70 480 28 195 35 180 max N04400 max max 70.0 max of strength, ductility & corrosion resistances. CP Grade 2 0.08 0.30 0.03 O 0.25 Very high strength to weight atio combined with r 3.7035 bal 4.51 0.163 ANN 50 345 40-65 275-450 20 R50400 max max max max excellent seawater corrosion resistance. Ti 3Al/2.5V 0.08 0.25 0.03 2.5- V 2.0- High strength to weight atio. Excellent corrosion r Grade 9 3.7194 bal 4.48 0.162 CWSR 125 860 105 725 10 max max max 3.50 2.5 resistance. R56320 Ti 6Al/4V Grade 5 3.7165 bal 6.0 V 4.0 4.33 0.156 CWSR 159 1100 141 980 8 Very high strength o weight ratio. t R56401
  • 4. e 102 - September 2011 Datasheet www.finetubes.comoil & gas Quality Assurance Process and quality Control of Fine Tubes products is critical in respect of consistently achieving the highest standards in the Chemical Process Industry for all applications. Strict quality Controls are applied at every stage of the processing operations. We have BS EN ISO 9001 and BS EN ISO 14001 approvals as well as individual client approvals. Fine Tubes also has First Point Approval and can supply to NACE MR-0175 and P.E.D. Reference lists and individual client approvals are available on request. Fine Tubes also have Nadcap approvals for their most critical operations: ISO 9001: 2008 / AS EN 9100 by BSI. Nadcap (Heat Treatment) reaccredited at Merit Status by P.R.I. Nadcap (NDT) reaccredited at Merit Stautus by P.R.I. AD2000 Merkblatt W0/TRD100 – TÜV 97/23/EC (PED) – TÜV Fine Tubes also has First Point Approval and can supply to NACE MR-0175 and NORSOK M-650 requirements. Project reference lists and individual client approvals are available on request. Information on the pressure ratings of tubing is available upon request. Fine Tubes Ltd. Fine Tubes Fine Tubes Fine Tubes Plymbridge Road, Estover Sales Office Europe Sales Office Western Europe Sale Office India Plymouth Zeppelinstr. 73 23, Rue Antigna Eros Corporate Towers Devon, PL6 7LG D-81669 Munich F-45000 Orléans Level 15, Nehru Place UK FRANCE - 110019 New Delhi GERMANY INDIA Sales Tel: +44 (0)1752 697216 Tel: +49 (0) 89 458355-43 Tel: +33 (0) 238775-702 Tel: +91 (0) 114223 5118 General Tel: +44 (0)1752 735851 Fax: +49 (0) 89 458355-53 Fax: +33 (0) 238812-407 Fax: +91 (0) 114223 5222 Fax: +44 (0)1752 733301 Email: sales@finetubes.de Email: sales@finetubes.fr E-mail: sales@finetubes.in Email: sales@finetubes.co.uk www.finetubes.com Disclaimer: The information contained within this data sheet is for guidance only and is not intended for warranty of individual application - express or implied.