Ride the Storm: Navigating Through Unstable Periods / Katerina Rudko (Belka G...
Tips on Gas Powered Bicycle Installation
1. Tips on Gas Powered Bicycle Installation
Are you a bicyclist who's in need of a rush but can't afford a motorcycle? Then, a gas powered bicycle is an
option that you should take into consideration. A gas powered bicycle can give you that extra boost in speed
that you’re looking for. A gas powered motor is not very difficult to install as long as you follow the instructions
and bear in mind certain tips, common pitfalls and things to remember and avoid. A typical gas powered
bicycle kit can be assembled in about two hours and if you are not the most mechanically inclined individual,
you can take it over to a mechanic and he can install it for you. In this article, we will give you a few tips on how
one can install a gas powered bicycle kit.
Before you start with the installation of the gas powered bicycle kit, you need to check and verify the
installation manual along with the sizes and specifications of all the major parts and components including the
motor, brackets and the exhaust. You need to make sure that each component is suitable for the bike and will
fit properly. One must ensure that the brackets will mount properly and the engine fits along with the exhaust
will have the required clearance from both the bicycle’s components as well as the rider in order that the gas
powered bicycle is functional and safe.
There are a number of things that you need to keep in mind when installing a gas powered bicycle kit. It is
essential to remember never to modify the mounting equipment or mounting angles for the motor. Any changes
will cause the motor to go off balance and lead to a very unstable and wobbly ride and can even throw an
individual from the gas powered bicycle completely. If your gas powered bicycle kit has a kill switch, this
particular component needs to be grounded properly which entails taking off a small amount of paint from
your gas powered bicycle where the kill switch is located. It is very important for one to check and confirm the
clearance and mounting of all the moving parts which includes the belts and gears. Finally, feel free to take
your time and carry out the installation with the help of the suitable tools. A rushed assembly or installation on
your gas powered bicycle can lead to a dangerous situation and using incorrect tools for the job can damage
certain parts and make the installation job unnecessary difficult.
For more information on Motorized Bicycles, including other interesting and informative articles and
photos, please click on this link: Tips on Gas Powered Bicycle Installation