Modelling Renewables Resources and Storage in PowerFactory V15.2, 9 June 2015. Madrid Spain

772 views

Published on

Content:
Basic PowerFactory Concepts
Overview of System Analysis Functions
Dynamic Modelling with PowerFactory
Types of Wind Turbines Technologies
WTG Models for Load Flow and Short Circuit Calculation
Global “Templates” library
WTG Models for Dynamic Simulation
Fully Rated WTG Template
PV and Battery Energy Storing System (BESS)
The Book…

Published in: Engineering
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
772
On SlideShare
0
From Embeds
0
Number of Embeds
5
Actions
Shares
0
Downloads
81
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Modelling Renewables Resources and Storage in PowerFactory V15.2, 9 June 2015. Madrid Spain

  1. 1. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 1/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org Seminar: Modelling Renewables Resources and Storage in PowerFactory V15.2 @fglongatt
  2. 2. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 2/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org Copyright Notice Copyright Notice The documents are created by Francisco M. Gonzalez-Longatt and contain copyrighted material, trademarks, and other proprietary information. All rights reserved. No part of the documents may be reproduced or copied in any form or by any means - such as graphic, electronic, or mechanical, including photocopying, taping, or information storage and retrieval systems without the prior written permission of Francisco M. Gonzalez-Longatt . The use of these documents by you, or anyone else authorized by you, is prohibited unless specifically permitted by Francisco M. Gonzalez-Longatt. You may not alter or remove any trademark, copyright or other notice from the documents. The documents are provided “as is” and Francisco M. Gonzalez-Longatt shall not have any responsibility or liability whatsoever for the results of use of the documents by you. @fglongatt fglongatt.org
  3. 3. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 3/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org Agenda
  4. 4. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 4/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org Agenda • Basic PowerFactory Concepts • Overview of System Analysis Functions • Dynamic Modelling with PowerFactory • Types of Wind Turbines Technologies • WTG Models for Load Flow and Short Circuit Calculation • Global “Templates” library • WTG Models for Dynamic Simulation • Fully Rated WTG Template • PV and Battery Energy Storing System (BESS) • The Book…
  5. 5. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 5/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org Basic PowerFactory Concepts
  6. 6. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 6/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org I. Basic PowerFactory Concepts • The calculation program PowerFactory, as written by DIgSILENT. • It is a computer aided engineering tool for the analysis of industrial, utility, and commercial electrical power systems. • It has been designed as an advanced integrated and interactive software package dedicated to electrical power system and control analysis in order to achieve the main objectives of planning and operation optimization. http://www.digsilent.de/ Dr. Martin Schmieg
  7. 7. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 7/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org I. Basic PowerFactory Concepts • The name DIgSILENT stands for "DIgital SImuLation and Electrical NeTwork calculation program''. • DIgSILENT Version 7 was the world's first power system analysis software with an integrated graphical one-line interface. • That interactive one-line diagram included drawing functions, editing capabilities and all relevant static and dynamic calculation features.
  8. 8. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 8/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org I. Basic PowerFactory Concepts • DIgSILENT power system calculation package was designed as an integrated engineering tool. • It provides a complete 'walk-around' technique through all available functions, rather than a collection of different software modules. • PowerFactory Version 14, DIgSILENT represents a further step towards seamless integration of functionality and data management within a multi-user environment.
  9. 9. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 9/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org I. Basic PowerFactory Concepts • There are three basic integration characteristics that contribute to make PowerFactory a unique power system analysis tool: a) Functional integration c) Vertical integration b) Database integration
  10. 10. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 10/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org I.A. Functional Integration • DIgSILENT PowerFactory software is implemented as a single executable program, and is fully compatible with Windows 95/98/NT/2000/XP/Vista.
  11. 11. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 11/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org I. B. Vertical Integration • Vertically integrated power equipment model concept allowing models to be shared by all analysis functions DATA
  12. 12. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 12/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org II.C. Database Integration • DIgSILENT PowerFactory provides optimal organization of data and definitions required to perform any type of calculation, memorization of settings or software operation options.
  13. 13. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 13/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org II.C. Database Integration • The PowerFactory database environment fully integrates all data required for defining cases, operation scenarios, single-line graphics, outputs, run conditions, calculation options, graphics, user- defined models, etc. Project Manager Visioning and Publishing Master and Device Compare and Merge Single Database Concepts: all data for standard and advanced functions are organized in a single, integrated database.
  14. 14. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 14/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org II.C. Database Integration • Project Management: All the data that defines a power system model and allows its calculation is stored in so called 'Project' folders within the database. • Inside a 'Project', folders called 'Study Cases' are used to define different studies of the system considering the complete network, only parts of it or variations on its current state.
  15. 15. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 15/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org II.C. Database Integration • This 'project and study case' approach to define and manage power system studies is a unique application of the object-oriented software principle. • Standard software packages often require the user to create a large number of similar saved cases, with multiple nested directories for large complex networks and studies. • This approach of the structure is both easy to use while avoiding redundancy.
  16. 16. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 16/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org Overview of System Analysis Functions This Section Presents a General Overview of the Supported PowerFactory Functions
  17. 17. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 17/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org I. General Overview OHL parameter calculation Cable parameter calculation Asynchronous Machine parameter estimation Reliability analysis Optimal Power flow Economic Dispatch Power Flow AC/DC Powerflow Balanced/un- balanced Active power and reactive power controls Fault Analysis IEC 60909 IEC 61363 ANSI C37.4 G74 Complete method General faults/Multiple faults State Estimation Protection Functions Protection Simulation Network reduction Contingency Analysis Voltage Stability Analysis Power Flow Sensitivities Distribution Network Analysis Harmonic Analysis Ripple Control Distribution Network Optimization Flexible DSL – Modelling DIgSILENT Simulation Language RMS Simulation with abc Phase Representation Long-Term Stability Transient Motor Starting Real-Time Simulation Electromagnetic transient (EMT) System Parameter identification Radial and Meshed 1-4 Phase AC grids and DC Grids Transmission and Distribution Industry Wind Power PV System Railway Smart Grid ApplicationsGridPowerSystemAnalysisFunctions Source: DigSILENT PowerFactory http://www.digsilent.de/images/Software/DIgSILENT_PowerFactory/overview150.png @fglongatt
  18. 18. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 18/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org • PowerFactory offers a wide variety of calculation commands, of which the: – Load Flow Analysis – Short-Circuit Analysis – Harmonics Analysis – Stability and EMT Simulations – Modal Analysis / Eigenvalue Calculation – Model Parameter Identification – Contingency Analysis – Reliability Assessment – Optimal Power Flow – Optimization Tools for Distribution Networks – Protection – Network Reduction – State Estimation Calculation Commands in PowerFactory
  19. 19. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 19/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org Different Types of Simulations • DigSILENT PowerFactory, NetomacTM and SimpowTM, offer both dynamic and instantaneous value modes of simulation. @fglongatt
  20. 20. Seminar:ModellingRenewablesResourcesandStorageinPowerFactoryV15.2 Prof Francisco M. Gonzalez-Longatt PhD | fglongatt@fglongatt.org | Copyright © 2015, Madrid, Spain, 8 June 2015 119/119 Allrightsreserved.Nopartofthispublicationmaybereproducedordistributedinanyformwithoutpermissionoftheauthor.Copyright©2015.http:www.fglongatt.org Visit: http://www.fglongatt.org Any questions or suggestions are welcome fglongatt@fglongatt.org @fglongatt Copyright Notice The documents are created by Francisco M. Gonzalez-Longatt and contain copyrighted material, trademarks, and other proprietary information. All rights reserved. No part of the documents may be reproduced or copied in any form or by any means - such as graphic, electronic, or mechanical, including photocopying, taping, or information storage and retrieval systems without the prior written permission of Francisco M. Gonzalez-Longatt . The use of these documents by you, or anyone else authorized by you, is prohibited unless specifically permitted by Francisco M. Gonzalez-Longatt. You may not alter or remove any trademark, copyright or other notice from the documents. The documents are provided “as is” and Francisco M. Gonzalez-Longatt shall not have any responsibility or liability whatsoever for the results of use of the documents by you.

×