1. Recycling For Carnival

2. Recycled material Plastic Cardboard Spray Material That Was Not Recycled Thread Inch tape Star shapes Glue

3. The Goddess Of The Sea

4. step 1 It all started with a piece of plastic!!

5. Step 2: I Then Found a Design That Looked Approximately The Same Design i Wanted The pattern of the skirt sketched on plastic ...

6. Step 3: Was that when i cut the pattern i sawed the pieces together. The process of sawing

7. Step 4: “The spraying” The final process after sawing I then sprayed the plastic with spray that I found in my fathers garage

8. Step 5 “The frills” The frills were cut and sawed to the skirt too... The frills sawed to the skirt...

9. Step 6 “The stars” After the frills stars were cut... and sprayed And then stuck to the skirt...

10. “The top” A piece of plastic cut for the top... The top was then “shaped” with a recycled thread...

11. Step 6: “The Spraying” Before spaying.. The top painted in blue

12. Step 7:“The Decorations” The stars were stuck... The top was decorated with beads too... And other decorations were added

13. Step 8: “The Fastening” The top was fastened with Velcro

14. STEP 9:The headdress matching the costume

15. THE FINISHING PRODUCT

16. Age: 13 School: St.Dorothy’s Senior School Zebbug Teacher: Ms. Josianne Sacco