20110402 nadzab modular housing

379 views
254 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
379
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
16
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

20110402 nadzab modular housing

  1. 1. NADZAB COMMUNITY DEVELOPMENTMODULAR CONSTRUCTION 2 April 2011
  2. 2. INTRODUCTIONThe purpose of this document is to assist in deriving pricing for the Modular aspectsof 5 No. purpose designed houses and Hotel components for the Papua New Guineamarket.The pricing exercise covers the modular aspects of the construction only. All otheraspects are not intended to be covered in this document which would include thefollowing; • Foundation Works. • Roofing. • External Works.The design and specification contained within this document assumes compliance isrequired to Australian Standards and local Papua New Guinea building codes.These buildings are to be designed and constructed in keeping with sustainabledesign principles. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  3. 3. HOUSE TYPE A NADZAB COMMUNITY DEVELOPMENT
  4. 4. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE A – PERSPECTIVE
  5. 5. AA NADZAB COMMUNITY DEVELOPMENT
  6. 6. 6100 X 40006100 X 3600 12200 122006100 X 3600 X 4000 X 4000 6100 X 4000 6100 X 4000 NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE A – PREFABRICATION MODULES
  7. 7. Note: All External Walls to be Rendered Masonry Finish as per specifications. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE A – ELEVATIONS
  8. 8. Note: All External Walls to be Rendered Masonry Finish as per specifications. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE A – ELEVATIONS
  9. 9. Note: All External Walls to be Rendered Masonry Finish as per specifications. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE A – ELEVATIONS
  10. 10. HOUSE TYPE B NADZAB COMMUNITY DEVELOPMENT
  11. 11. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE B – PERSPECTIVE
  12. 12. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE B – LOWER FLOOR PLAN
  13. 13. 6100 x 40006100 x 36006100 x 3600 12200 x 4000 12200 x 4000 Lower Level Floor Plan NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE B – PREFABRICATED MODULES
  14. 14. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE B – UPPER FLOOR PLAN
  15. 15. 12200 x 12200 x 4000 4000 6100 x 4000 Upper Level Floor Plan NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE B – PREFABRICATED MODULES
  16. 16. Note: All Lower Level External Walls to be Rendered Masonry Finish. All Upper level external walls to be metal sheet finish. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE B – ELEVATIONS
  17. 17. Note: All Lower Level External Walls to be Rendered Masonry Finish. All Upper level external walls to be metal sheet finish. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE B – ELEVATIONS
  18. 18. HOUSE TYPE C NADZAB COMMUNITY DEVELOPMENT
  19. 19. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE C - PERSPECTIVE
  20. 20. NADZAB COMMUNITY DEVELOPMENT
  21. 21. 6100 x 36006100 x 3600 12200 x 4000 12200 x 4000 12200 x 4000 House Area: 147 sqm Garage Area: 45 sqm NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE C – PREFABRICATED MODULES
  22. 22. Note: All External Walls to be Rendered Masonry Finish as per specifications. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE C – ELEVATIONS
  23. 23. Note: All External Walls to be Rendered Masonry Finish as per specifications. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE C – ELEVATIONS
  24. 24. HOUSE TYPE D NADZAB COMMUNITY DEVELOPMENT
  25. 25. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE D – PERSPECTIVE
  26. 26. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE D – GROUND FLOOR PLAN
  27. 27. 6100 X 3600 6100 X 3600 NADZAB COMMUNITY DEVELOPMENTHOUSE TYPE D – GROUND FLOOR - MODULES
  28. 28. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE D – FIRST FLOOR PLAN
  29. 29. 12200 12200 14200 14200X 3600 X 3600 6100 X 4000 X 4000 X 4000 NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE D – FIRST FLOOR - MODULES
  30. 30. Note: All External Walls to be Rendered Masonry Finish as per specifications. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE D – ELEVATIONS
  31. 31. Note: All External Walls to be Rendered Masonry Finish as per specifications. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE D – ELEVATIONS
  32. 32. HOUSE TYPE E NADZAB COMMUNITY DEVELOPMENT
  33. 33. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE E – PERSPECTIVE
  34. 34. AA NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE E– GROUND FLOOR PLAN
  35. 35. 14200 X 400014200 X 4000 NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE E– GROUND FLOOR - MODULES
  36. 36. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE E – FIRST FLOOR PLAN
  37. 37. 14200 X 400014200 X 400014200 X 4000 NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE E – FIRST FLOOR - MODULE
  38. 38. Note: All External Walls to be Rendered Masonry Finish. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE E – ELEVATIONS
  39. 39. Note: All External Walls to be Rendered Masonry Finish. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE E – ELEVATIONS
  40. 40. NADZAB COMMUNITY DEVELOPMENT HOUSE TYPE E – ELEVATIONS
  41. 41. MATERIAL SPECIFICATIONS NADZAB COMMUNITY DEVELOPMENT
  42. 42. MATERIAL SPECIFICATIONS INTRODUCTIONThe following material specifications are intended for pricing purposes and are notthe final specification for construction.The specifications cover the pre-fabricated aspects of the housing only. The otheraspects are not covered in this specification and are to be priced separately.The specification details branded products that may be substituted with equivalentstandard products sourced in China or elsewhere.The design and specification assumes compliance is required to Australian Standardsand local building codes. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  43. 43. EXTERNAL WALL(Rendered Masonry appearance)1 layer of 12.5mm Exterior Cement Board, taped and jointed using Exterior Joint Fillerand Exterior Tape 10cm, with Breather Membrane behind. Render Finish to exteriorwall using 7mm Exterior Basecoat with embedded reinforcing mesh / Exterior gradeprimer / Coloured Exterior Mineral Finish Plaster. (External wall system to be KnaufAquapanel system or approved equivalent).http://manual.knaufdrywall.co.uk/knauf-systems/page_670/page_740/page_743.htmlMin 75mm Steel studs at 600mm maximum centres to manufacturers specification.Cavity insulation with R2.5 Rockwool.Internal wall lining to be 16mm Plasterboard (CSR “Gyprock” or approvedequivalent).100mm MDF Moulded Skirting.Finish Internal Plasterboard walls and skirting painted with low sheen wash and wearacrylic. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  44. 44. EXTERNAL WALL(Metal Sheeting finish)1 x layer of 0.48 mm aluminium/zinc alloy-coated steel sheet with Colourbond pre-applied finish in “Mini-orb” profile. Install sheets horizontally with lapped joints tomanufacturers specification. Adopt external valley fixings. (Lysaught ColourbondMiniorb sheeting or approved equivalent).Min 75mm Steel studs at 600mm maximum centres to manufacturers specification.Cavity insulation with R2.5 Rockwool.Internal wall lining to be 16mm Plasterboard (CSR “Gyprock” or approvedequivalent).100mm MDF Moulded Skirting.Finish Internal Plasterboard walls and skirting painted with low sheen wash and wearacrylic. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  45. 45. WINDOWS & SLIDING DOORS(As per external elevations)24mm double glazed windows and sliding doors.2400mm high unless shown otherwise.Glass to be tinted to assist sun reflection.All windows and sliding doors to be designed to withstand the local wind loadingcodes.Powder coated aluminium frames. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  46. 46. INTERNAL PARTITION WALLS(Standard Internal Walls)1 layer x 16mm Plasterboard (CSR “Gyprock” or approved equivalent)Steel studs at 600mm maximum centres to manufacturers specification.1 layer x 16mm Plasterboard (CSR “Gyprock” or approved equivalent)100mm MDF Moulded Skirting.Plasterboard walls and skirting painted with low sheen wash and wear acrylic. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  47. 47. INTERNAL PARTITION WALLS(Wet Area Internal Walls: Laundry/Kitchen/Bathrooms)1 layer x 13mm Water-resistant Plasterboard (Gyprock Aquachek or approvedequivalent)Steel studs at 600mm maximum centres to manufacturers specification.1 layer x 13mm Plasterboard (CSR “Gyprock” or approved equivalent)100mm MDF Moulded Skirting.Dry side Plasterboard walls finished with walls and skirting painted with low sheenwash and wear acrylic.Dry side Plasterboard walls and skirting finished with water resistant low sheen washand wear acrylic. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  48. 48. CEILINGS1 x layer x 13mm Plasterboard (CSR “Gyprock ” or approved equivalent)Steel joists to manufacturers specification. Insulated with R 1.5 Rockwool fullyencapsulated batts (CSR Bradford or approved equivalent)10mm Shadowline joints at cornice.Plasterboard and Plaster Covered Cornice painted with low sheen wash and wearacrylic NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  49. 49. TIMBER FLOORSSteel joists to structural engineers specification, with 12mm Acoustic Pad Lininginsulated with 75mm Glasswool fully encapsulated partition batts.1 x layer x 18mm of Compressed Fibre Cement sheeting.Floor finish with Solid Strand Woven Bamboo Flooring planks (Planks 1830 x 130 x12mm) fastened with Uniclic system. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  50. 50. GRANITE FLOORSSteel joists to structural engineers specification, with 12mm Acoustic Pad Lininginsulated with 75mm Glasswool fully encapsulated partition batts.1 x layer x 18mm of Compressed Fibre Cement sheeting.Floor finished with 16mm Granite floor panels in 600 x 2100 modules. All joints to beflush. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  51. 51. TILED FLOORS(Toilet/Bathrooms/Laundry)Steel joists to structural engineers specification, with 12mm Acoustic Pad Lininginsulated with 75mm Glasswool fully encapsulated partition batts.1 x layer x 18mm of Compressed Fibre Cement sheeting.Floors finished with high grade floor tiles to future specification. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  52. 52. HOTEL ASPECTS NADZAB COMMUNITY DEVELOPMENT
  53. 53. NADZAB COMMUNITY DEVELOPMENT MATERIAL SPECIFICATIONS
  54. 54. NADZAB COMMUNITY DEVELOPMENT HOTEL BLOCK PLANS
  55. 55. NADZAB COMMUNITY DEVELOPMENT HOTEL BLOCK PLANS
  56. 56. 12200 x 4000 14200 x 4000 NADZAB COMMUNITY DEVELOPMENT HOTEL MODULE STRATEGY
  57. 57. NADZAB COMMUNITY DEVELOPMENT HOTEL SECTION
  58. 58. 12200 x 4000 14200 x 4000 12200 x 4000 14200 x 4000Note: Masonry Wall to be part of the foundations contract. NADZAB COMMUNITY DEVELOPMENT HOTEL MODULE STRATEGY
  59. 59. HOTEL VILLA NADZAB COMMUNITY DEVELOPMENT HOTEL VILLA SITE PLAN
  60. 60. NADZAB COMMUNITY DEVELOPMENT HOTEL VILLA - PERSPECTIVE
  61. 61. NADZAB COMMUNITY DEVELOPMENT HOTEL VILLA - PLAN
  62. 62. 4000 4000 Each Villa comprises two 12,200 x 4,000 mm prefabricated units.12,200 NADZAB COMMUNITY DEVELOPMENT HOTEL VILLA – PREFABRICATION
  63. 63. NADZAB COMMUNITY DEVELOPMENTMODULAR CONSTRUCTION 2 April 2011

×