CLOSED TRAY IMPRESSION TECHNIQUE FOR BONE LEVEL IMPLANTS




1. Place the impression post         2. Place the polymer imp...
Upcoming SlideShare
Loading in...5
×

Straumann Bone Level Closed Tray Impression

12,851

Published on

Step by step impression taking when using a closed tray approach

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
12,851
On Slideshare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
197
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "Straumann Bone Level Closed Tray Impression"

  1. 1. CLOSED TRAY IMPRESSION TECHNIQUE FOR BONE LEVEL IMPLANTS 1. Place the impression post 2. Place the polymer impression 3. Push the impression cap in 4. Apply impression material around into the implant and tighten the cap on top of the fixed impression an apical direction until it clicks. the impression post. This ensures that guide screw using the SCS post. The color of the cap must The impression cap is now firmly a complete impression is taken. screwdriver. correspond to the color of the seated on the impression post. positioning screw in the post and the arrows must align in a buccal- lingual direction. 5. Fill tray with impression 6. Once the material is cured, 7. The impression cap remains 8. Unscrew and remove the material and take the impression. carefully remove the tray. in the impression material and impression post from the patient's is automatically pulled off from mouth. Mount the impression post the impression post with the onto the analog using the guide screw. Straumann® is a registered trademark of Straumann Holding AG, or its affiliates. All rights reserved. removal of the tray. 2/09 USLIT 267 Straumann products are CE marked 9. Ensure the color code of the 10. Reposition the impression post 11. Gently push the impression 12. The impression is now ready analog corresponds to the color in the tray. post until you feel a tactile response to be used to create a model. code of the polymer cap in the of engagement. impression material. Procedure for NC and RC closed tray impression taking is the same. RC COMPONENTS NC COMPONENTS 025.4201 RC Impression post, 025.2201 NC Impression post, © Straumann USA, LLC 2009 with guide screw and cap with guide screw and cap 025.4101 RC Implant analog 025.2101 NC Implant analog 046.401 SCS screwdriver

×