1974'ten beri dünya çapında kalıp ve modelci reçineleri üretim ve tedarikinde uzmanlaşmıştır. Üstün Alman teknolojisi ile geliştirilmiş yüksek kaliteli model malzeme yelpazesi; poliüretan, epoksi ve silikon reçine sistemleri, sertleştiriciler, kalıp ayırıcılar ile blok malzeme opsiyonları. Ebalta ürünleri gemicilik, hava endüstrisi, vitrifiye, döküm, otomotiv ve benzeri birçok endüstride prototip, model ve kalıp üretimi, sıhhi tesisat teksir kalıp imalatı gibi bir çok yaygın kullanım imkanı sunmaktadır. Ürünlerimiz ile ilgili daha fazla bilgi alamak için lütfen EPOKS Kimyevi Ürünleri'nin sitesi olan http://www.epoks.com.tr adresini ziyaret ediniz.

1. Product overview
Tooling Resins Blocks Auxiliaries Silicones

2. Resin /
Hardener Properties + Applications Mixing Special mixtures
Color Pot life ratio Type Properties Mixing
approx.
min. p.b.w. ratio
OH 4/SR white versatile, very good spreadable, negatives, master 15-20 100 : 12.5 SL longer pot life 100 : 14
good grinding, models, jigs, foundry
impact resistant surface pattern
OH 6-1/ blue very abrasion resistant, foundry pattern, 15-20 100 : 9 CH-1 chemical 100 : 11
SR very hard, PU-foaming tools, resistant
fine structure polyester hand lay-up
mould, coping models
OH 11/ oxyde abrasion resistant, impact foundry pattern, 20-25 100 : 40 OH 11 very hard, 100 : 30
PUR 3 red resistant, excellent dissolving core boxes hard tough
properties of mould and core OH 11 sheet metal 100 : 20
sand, on polyurethane base steel forming
OH 12/AG beige very shock resistant, core boxes, pattern 20-25 100 : 17 OH good surface 100 : 15
abrasion resistant, plates, foundry 12-G slip, aluminium
resistant pattern, boards sheet forming
OH 20/ red fine structure, jointless surface, master models, 30-35 100 : 15 CH-2 well spread- 100 : 15
CH-2 gel brown well workable, well spreadable design models able, jointless
surface
Gel coats
OH 33/ black styrene resistant, RTM tools, 20-30 100 : 19 - - -
CH-1 resistant against solvent, polyester tools,
good grinding, hand lay-up models,
dense surface, PU-foaming tools
heat resistant
OH 35/ black chemical resistant, polishable, PU-foaming tools, 20-30 100 : 16 - - -
CH-1 grinding possible, RIM foam tools,
dense surface, polyester press forms,
heat resistant prepreg tools,
adhesive probes,
vacuum forming tools
OH 38/ alu-grey good grinding, aluminium-like, vacuum forming tools, 20-30 100 : 12 CH-1 chemical 100 : 15
SR polishable, PU-foaming tools, resistant
dense surface, prepreg tools,
good heat resistance adhesive probes
OH 48 green, very abrasion resistant, Shore core boxes, 25-30 100 : 75
beige hardness D approx. 65, non-toxic foundry patterns,
according to regulations for pattern plates
hazardous material
OH 50 black styrene resistant, chemical resis- RTM tools, 12-18 100 : 20 - - -
tant, very dense surface, polyester tools,
polishable, good heat resistance hand lay-up models
OH 82/ black very low thermal expansion, prepreg tool 220-260 100 : 31 - - -
TM very high heat resistance
dimensionally accurate
2

3. Resin /
Hardener Properties + Applications Mixing Special mixtures
Color Pot life ratio Type Properties Mixing
approx.
min. p.b.w. ratio
LH 22/GL white dimensionally accurate, laminate moulds, 40-45 100 : 25 GR shorter potlife 100 : 23
long pot life, checking gauges,
low exothermic character master models,
fixtures
LH 25 white flammability classification S 4, laminate parts for rail 50-60 100 : 15 LH faster curing 100 : 15
smoke emission class SR-2, vehicles, 25/S
tear drops class ST-2, boatbuilding LH slower curing 100 : 15
Laminating and general purpose resins
dimensionally accurate 25/L
LH 28-1/ brown very high heat resistance, vacuum forming tools, 240-360 100 : 40 - - -
TM trans- long processing time, prepreg tool, heat
parent low exothermic character, solvent probes,
heat curing blow moulds,
polyester injection
moulds
AH 100/ yellow unfilled, binding resin for silica 40-50 100 : 20 D high filler con- 100 : 19
TG trans- low cost, sand auxiliary nega- tent possible
parent low viscosity tives, laminating resin GL versatile 100 : 29
for fabrics, binding
resin for fillers
AH 110/TL yellow unfilled, Laminating resin also 85-95 100 : 24 TGL good curing 100 : 22
trans- high strength, for heavy fabrics/ TGS fast curing 100 : 22
parent high heat resistance bonded fabrics, bind-
ing resin for fillers
AH 120/ whitish unfilled, high heat resistance, Laminating resin also 80-90 100 : 25 TGL good curing 100 : 22
TL trans- low viscosity, for heavy fabrics/ GLD low viscosity 100 : 30
parent high strength bonded fabrics,
vehicle construction,
aircraft construction
AH 140/ bluish unfilled, good curing at room hand laminating, va- 55-65 100 : 30 LI 20 shorter pro- 100 : 35
TC 60 trans- temperature, cuum infusion, carbon cessing time,
parent high heat resistance, fibre sight laminates, potlife 20 min
low viscosity, laminates for: boat- LI longer pro- 100 : 35
high strength, excellent wet- building, automotive 130-1 cessing time,
out characteristics industry, aeronautic potlife 130 min
GH 705/TL alu-grey high heat resistance, PU-foaming tools, 65-75 100 : 10 SR brushable, 100 : 9
aluminium-like RIM foaming tools, fast curing
vacuum forming tools,
heatable foundry
Epoxy casting resins
pattern
GH 706/ blue abrasion resistant, fine foundry pattern, 30-40 100 : 18 GL castable very 100 : 10
GLE structure, good compressive core boxes, thick
strength, very hard, wear re- pattern plates,
sistant, well castable, castable coping models
until 20 mm
GH 723/D green low viscosity, very well bonding resin for 55-65 100 : 7 - - -
castable, well workable fillers
GH 730/ black impact resistant, foundry pattern, 35-45 100 : 10 D thin liquid 100 : 5
BR versatile core boxes, GL longer pot life 100 : 8
pattern plates,
SR brushable 100 : 5
jigs
3

4. Resin /
Hardener Properties + Applications Mixing Special mixtures
Color Pot life ratio Type Properties Mixing
approx.
min. p.b.w. ratio
GH 754 alu-grey heat resistant, vacuum forming tools, 100-120 100 : 10 - - -
very thick castable, PU-foaming tools
Epoxy casting resins
well workable, aluminium-like
GH 760/GL grey dimensionally accurate, foundry pattern, 45-55 100 : 10 SR brushable 100 : 7
abrasion resistant, high strength, core boxes, boards
castable until 40 mm,
very good sliding properties
GH 761/D black low viscosity, well castable foundry pattern, 50-60 100 : 5 GL castable in 100 : 8
pattern plates, bigger wall-
negatives thicknesses
GH 767/GL green workable, castable up to 50 mm foundry pattern, core 25-35 100 : 8 BR impact 100 : 10
boxes, pattern plates resistant
GH 781/ grey heat resistant, short curing PU-foaming tools, 90-110 100 : 5 GH longer pro- 100 : 5
GH 781 S time, high strength, heatable foundry 781 cessing time
low thermal expansion pattern
PS 02/ grey glassfiber-filled, foundry pattern, core 50-60 100 : 12 BRI fast curing 100 : 12
BRIL soft boxes, negatives,
mould constructions
PS 03-1 blue glassfiber-filled, heat resistant core boxes, negatives, 40-50 100 : 11 - - -
grey foundry pattern
PS 05/TLB grey glassfiber-filled, vacuum forming tools, 50-60 100 : 13 - - -
low shrinkage, PU-foaming tools,
heat resistant polyester press forms,
prepreg tools,
adhesive probes
PS 06/TL alu-grey heat resistant, good conductivity, vacuum forming tools, 50-60 100 : 4 - - -
good compressive strength, foam tools,
glassfiber-filled, polyester press tools
aluminium filled
Pastes
PS 07-1/ alu-grey heat resistant, vacuum forming tools, 70-80 100 : 6 - - -
TM glassfiber-filled, press tools, prepreg
aluminium filled tools, polyester press
tools, adhesive probes
PS 08/TL alu-grey aluminium filled, glassfiber- bulking material for 45-60 100 : 3 - - -
filled, air permeable vacuum forming tools
P 22 red good manual modelling, di- in the automotive field, 40-50 100 : 100 - - -
brown mensionally accurate, very well aircraft construction,
workable, long processing time industrial design
P 26 red seamless modelling EP paste close to final shape 45-60 100 : 100 - - -
brown (SMP), jointless, 30-50 mm models in the auto-
layer possible in one step, motive industry, for
low exothermic, boat building, in the
very well workable, aircraft industry,
dense surface, in the wind energy
no sagging at vertical surfaces industry
4

5. Resin /
Hardener Properties + Applications Mixing Special mixtures
Color Pot life ratio Type Properties Mixing
approx.
min. p.b.w. ratio
KP 6/TGL grey aluminium filled, couplingpaste EP resin/ 30-40 100 : 18 - - -
heat resistant backfilling
KP 7-1/TM grey high heat resistant, couplingpaste for 240-360 100 : 32 - - -
Pastes
aluminium filled OH 33/HM, OH 35/HM,
OH 38/HM, LH 28-1/TM
KP 8 grey well spreadable, couplingpaste for 20-25 100 : 28 - - -
good bonding agent hard elastic PU resin,
couplingpaste for
aluminium carrier in
front layer casting
SG 130/ ivory unfilled, foundry pattern, core 2.5-3.5 100 : 100 SG pot life 100 : 100
PUR 11 impact resistant, boxes, pattern plates, 130 L 5-7 min.
high strength negatives, prototypes, SG pot life 100 : 100
vacuum forming tools, 131 9-15 min.
coping models, mould
probes for trimming of
prototypes
SG 140/ beige high filler content possible, foundry pattern, core 4-5 100 : 100 SG pot life 100 : 100
PUR 12 unfilled, high strength boxes, negatives, 140 L 7-9 min.
control castings,
coping models, vacuum
forming tools
SG 150 grey highly heat resistant, vacuum forming tools, 18-22 100 : 200 : - - -
fast curing foam tools, 450 : 9
Fast casting resins
polyester press tool
SG 600/ red fine structure, foundry pattern, core 4-6 100 : 15 - - -
PUR 4 well workable, boxes, checking casts,
very well castable negatives,
prototypes, mould
probes for trimming of
prototypes
SG 700/ blue well castable, fine structure, foundry pattern, core 5-6 100 : 15 SG abrasion 100 : 15
PUR 5 dimensionally accurate, boxes, jigs, negatives, 700 A resistant,
fast curing, checking casts, pot life
versatile prototypes 5-7 min.
SG 2000 ivory unfilled, very thin liquid, foundry pattern, core 2.5-3.5 100 : 100 SG pot life 100 : 100
high filler content possible, boxes, negatives, 2000 S 1.5-2.5 min.
good curing, pattern plates, checking SG pot life 100 : 100
very high strength, casts, coping models, 2000 L 7-8 min.
very heat resistant vacuum forming tools,
SG pot life 100 : 100
mould probes for trim-
2015 14-18 min.
ming of prototypes
ebatemp/ alu-grey very smooth surface, polishable, vacuum forming tools, 4.5-5.5 100 : 16 - - -
PUR 5 well castable, well workable, foundry pattern,
aluminium filled negatives
5

6. Resin /
Hardener Properties + Applications Mixing Special mixtures
Color Pot life ratio Type Properties Mixing
approx.
min. p.b.w. ratio
GM 708/ brown unfilled, sheet metal forming, 45-60 100 : 75 - - -
PUR 4 slow curing foundry pattern,
negatives, jigs
GM 714/ grey very thick castable, wear resistant, sheet metal forming, 40-45 100 : 15 - - -
PUR 4 dimensionally accurate, abrasion foundry pattern,
resistant, versatile pattern plates
GM 725-7/ beige thick castable, dimensionally accu- sheet metal forming, 40-50 100 : 15 PUR 4 high 100 : 15
PUR 13 rate, excellent flow properties, well negatives, foundry strength
workable, long potlife, hight strength pattern, checking casts,
pattern plates, jigs
GM 900 black Shore A hardness 10, casting mould for 50-60 100 : 10 - - -
highly flexible, gypsum, plastic,
good tear propagation resistance wax and for ceramic
materials
GM 951 black Shore A hardness 47, casting mould for 25-30 100 : 10 - - -
high tear strength, gypsum, plastic,
well castable wax, ceramic
Polyurethane casting resins
materials, PU-foam,
cement and for
gaskets
GM 958 red Shore A hardness 60, very low water casting moulds for 20-30 100 : 100 - - -
brown absorbtion, excellent flow properties, concrete industry,
good tear propagation resistance cement, ceramic
materials, fwax,
gypsum and for plastic
GM 959 amber Shore A hardness 45, casting moulds for 22-28 100 : 150 GM Shore A 100 : 50
Shore hardness (flexibility) varia- concrete industry, 959-1 hardness 80
ble, excellent flow properties, good cement, wax, ceramic comp.
degasing, easily dyeable, good tear materials, gypsum B
propagations resistance and for plastic, proto-
types with rubberlike
properties
GM 972 beige Shore A hardness 86, casting moulds for 6-8 100 : 45 PUR Shore A 100 : 60
well castable, gypsum,plastic, wax, 11 hardness 75
high strength, PU-foam, cement
cold flexible and for ceramic
materials
GM 973 beige Shore A hardness 90, high tear flexible parts, 12-15 100 : 15 - - -
strength, well castable, flexible, jigs
dyeable
GM 983 reddish very abrasion resistant, Shore hardness core boxes, 35-45 100 : 150 - - -
trans- D approx. 60, non-toxic according to foundry patterns,
parent regulations for hazardous material pattern plates
GM 984-1 reddish very abrasion resistant, Shore hardness core boxes, 30-45 100 : 130 - - -
trans- D approx. 65, non-toxic according to foundry patterns,
parent regulations for hazardous material pattern plates
GM 985-1 grey very abrasion resistant, Shore hardness core boxes, 11-16 100 : 50 - - -
D approx. 68, non-toxic according to foundry patterns,
regulations for hazardous material pattern plates
6

7. Resin /
Hardener Properties + Applications Mixing Special mixtures
Color Pot life ratio Type Properties Mixing
approx.
min. p.b.w. ratio
Polyurethane casting resins
GM 978/D black very shock resistant, well foundry pattern, core 35-45 100 : 17 GL thicker 100 : 25
castable, boxes, prototypes with castable
castable until 8 mm thermoplastic like
properties
GM 979/ green wear resistant, good com- foundry pattern, 25-35 100 : 25 - - -
PUR 1 pressive strength, impact core boxes,
resistant, heat resistant, ex- pattern plates,
cellent dissolving of mould negatives
and core sand properties
HFG/ grey very thick castable, backfillings for core 7-9 100 : 33 HFG-plus filled, for 100 : 22
PUR 11 fast curing, boxes, backfillings large volume
impact resistant, for negatives back fillings,
dimensionally accurate, low price
for large volume back fillings
Silicone light condensation curing, flexible parts, casting 20-30 100 : 2 thin condensation 100 : 2
high solid grey high strength, moulds for gypsum, liquid curing,
in-mould releasing, plastic, wax, ceramic well castable,
flexible, materials, flexible low viscosity,
28 Shore A gaskets, cast-in of in-mould
electrical parts releasing,
28 Shore A
Silastic® red- condensation curing, elastic casting moulds 120- 100 : 10 - - -
3120 brown excellent heat resistance, for lowmelting blends, 180
60 Shore A tin
Silastic® white condensating curing, flexible moulds for 90-120 100 : 5 81 F NW fast 100 : 5
3481 21 Shore A, vacuum forming 81 VF NW very fast 100 : 5
universal
81 R NW resin resistant 100 : 5
Casting silicones
Silastic® M blue addition curing, 59 Shore A flexible moulds for 60 100 : 10 - - -
vacuum forming,
gypsum, wax, plastic,
casting of electrical
parts
Silastic® S green addition curing, flexible moulds for 40-60 100 : 10 - - -
very good tear strength, casting, vacuum
25 Shore A casting, gypsum,
wax and for plastics
Silastic® trans- addition curing, flexible moulds for 90 100 : 10 T-4 0 oil bleeded 100 : 10
T-4 lucent demouldable after 5-6 h, casting, vacuum
oil bleeding, casting, gypsum, wax,
40 Shore A plastics, encasing of
electrical oil bleeding
components
Silastic® V purple addition curing, 38 Shore A, flexible moulds for 60-90 100 : 10 - - -
long mould working life vacuum forming,
gypsum, wax, plastic,
casting of electrical
parts
7

8. Color Properties Applications
ebablock® M 007 brown dense surface, fine structure, very well workable cubing/master/ design models
ebablock® EP 138 mint heat resistant till 140 °C, low coefficient to linear expansion tools for prepregs
ebablock® 105 light well working, fine structure foundry pattern,
ebaboard 105 grey core boxes, jigs
ebablock® 920 new green high quality surface, high abrasion resistant, good edge strength foundry pattern, core boxes,
ebaboard PW 920 new pattern plates
ebablock® 1200 beige low thermal expansion, good edge strength, high quality surface jigs, fixtures,
ebaboard 1200 moulding tools
ebablock® K 08 salmon very high abrasion resistant, very shock resistant, dense surface core boxes
ebablock® 140 blue low thermal expansion, high abrasion resistance, foundry pattern,
ebaboard 140 fine structure core boxes,
pattern plates
ebablock® Alu alu- dense surface, data control models,
grey well workable inspection models,
design models
Boards and blocks
ebablock® 170 grey good heat resistance, jigs, moulding tools,
ebaboard 170 low thermal expansion vacuum forming tools
ebablock® LX-1 beige low coefficient of linear expansion, jig construction, moulding tools
ebaboard LX-1 good edge strength
ebablock® W grey high strength, wear resistant, sheet metal forming, hammer form
ebaboard W low thermal expansion tools, jigs, mould constructions
ebablock® 1820 beige low thermal expansion, high heat resistance foundry pattern, jigs,
mould constructions
ebablock® P 185 beige low thermal expansion, high heat resistance galvano bath models, tools for low
temperature prepreg
ebaboard L-1 ochre very well workable, good edge strength, good compressive strength master/design models, laminating tools
ebaboard 60-1 red- dense surface, fine structure, master models, design models,
brown very well workable foundry pattern
ebaboard S-1 red- dense surface, fine structure, master models, foundry pattern,
brown very well workable design models
ebazell 50 light very low weight, styling models, negatives,
beige very well workable base construction
ebazell 80 light fine structure, styling models,
beige very well workable master models,
design models
ebazell 160 light very fine structure, master models, design models,
green very well workable arts and crafts
ebazell 260 light very fine structure, master models, design models,
grey very well workable, arts and crafts
dimensionally stable
8

9. Linear thermal
Density expansion coefficient Hardness Temperature resistance
[g/cm³] [10¯6K¯¹] 20-50 °C [Shore D] Martens [°C] Available sizes [mm]
0.80 ± 0.02 approx. 58 73 ± 3 81 ± 3 block material, dimensions variable
0.82 ± 0.02 approx. 49 75 ± 3 140 ± 3 block material, dimensions variable
1.05 ± 0.02 approx. 60 78 ± 2 98 ± 3 block material, dimensions variable
board material ebaboard 105
1000 x 500 x 50 / 1000 x 500 x 75 / 1000 x 500 x 100
1.22 ± 0.03 approx. 87 85 ± 3 80 ± 3 block material, dimensions variable
board material ebaboard PW 920 new
1000 x 500 x 30 / 1000 x 500 x 50 / 1000 x 500 x 75
1000 x 500 x 100
1.25 ± 0.02 approx. 54 82 ± 2 97 ± 3 block material, dimensions variable
board material ebaboard 1200
1000 x 500 x 50 / 1000 x 500 x 75 / 1000 x 500 x 100
1.35 ± 0.04 approx. 150 74 ± 3 - block material, dimensions variable
1.38 ± 0.03 approx. 69 85 ± 3 87 ± 2 block material, dimensions variable,
board material ebaboard 140
1000 x 500 x 30 / 50 / 75 / 100
1.55 ± 0.03 approx. 64 78 ± 2 78 ± 2 block material, dimensions variable
standard blocks
1000 x 500 x 26 / 1000 x 500 x 52 / 1000 x 500 x 104
Boards and blocks
1.70 ± 0.02 approx. 55 88 ± 3 85 ± 2 block material, dimensions variable
board material ebaboard 170
1000 x 500 x 50 / 1000 x 500 x 75 / 1000 x 500 x 100
1.75 ± 0.05 approx. 43 89 ± 3 90 ± 3 block material, dimensions variable
board material ebaboard LX-1
1000 x 500 x 50 / 1000 x 500 x 75 / 1000 x 500 x 100
1.76 ± 0.03 approx. 51 90 ± 3 76 ± 2 block material, dimensions variable
board material ebaboard W
1000 x 500 x 50 / 1000 x 500 x 75 1000 x 500 x 100
1.60 ± 0.03 approx. 53 90 ± 3 90 ± 5 block material, dimensions variable
1.86 ± 0.05 approx. 39 90 ± 3 115 ± 5 block material, dimensions variable
0.45 ± 0.02 approx. 66 45 ± 2 92 ± 2 1500 x 500 x 50 / 75 / 100 / 200
0.60 ± 0.02 approx. 64 57 ± 3 87 ± 3 1500 x 500 x 30 / 1500 x 500 x 50 / 1500 x 500 x 75
1500 x 500 x 100 / 1500 x 500 x 150 / 1500 x 500 x 200
0.70 ± 0.02 approx. 62 65 ± 4 87 ± 3 1500 x 500 x 30 / 1500 x 500 x 50 / 1500 x 500 x 75
1500 x 500 x 100 / 1500 x 500 x 150
0.05 ± 0.005 approx. 41 10 A - 2000 x 1000 x 100 / 2000 x 1000 x 150 / 2000 x 1000 x 200
further dimensions on request
0.08 ± 0.007 approx. 31 30 A - 2000 x 1250 x 100 / 2000 x 1250 x 200
2000 x 1250 x 300 / 2000 x 1250 x 400
further dimensions on request
0.163 ± 0.012 approx. 60 70 A - 2000 x 1000 x 100 / 2000 x 1000 x 150 / 2000 x 1000 x 200
2000 x 1000 x 300 / 2000 x 1000 x 400
further dimensions on request
0.25 ± 0.01 approx. 72 70 A - 2000 x 1000 x 50 / 2000 x 1000 x 100
2000 x 1000 x 150 / 2000 x 1000 x 200
further dimensions on request
9

10. Adhesive, repair paste and casting compound for blocks and boards
Properties Properties
Adhesive and Bonding and repairing of Adhesive and Bonding and repairing of
repair putty ebaboard PW 920 new and repair putty ebaboard 60-1 and ebaboard S-1,
green ebablock® 920 new, brown adhesive and repair putty can be mixed
adhesive and repair putty can be mixed among each other
among each other (potlife can be adjusted) (potlife can be adjusted)
Casting Changes of Adhesive and Bonding and repairing of
compound ebaboard PW 920 new and repair putty ebaboard 105 and ebablock® 105,
green ebablock® 920 new, light grey adhesive and repair putty can be mixed
well castable among each other
(potlife can be adjusted)
Adhesive and Bonding and repairing of Adhesive and Bonding and repairing of
repair putty ebaboard 140 and ebablock® 140, repair putty ebaboard 1200 and ebablock® 1200,
blue adhesive and repair putty can be mixed beige ebaboard LX-1 and ebablock® LX-1,
among each other (potlife can be adjusted) ebablock® 1820, adhesive and repair
putty can be mixed among each other
(potlife can be adjusted)
Casting Changes of Adhesive for alu grey,
compound ebaboard 140 and ebablock® 140, alu boards bonding of
blue well castable slow/fast ebaboard W and ebablock® Alu,
high strength, very excellent filling
and flow properties
Adhesive for Bonding of ebaboard L-1 Adhesive for grey,
boards ebazell boards bonding of ebazell boards,
ochre very excellent filling and flow properties,
very well workable
10

11. Release agents Polyester fillers Sheet wax
T 1-1 liquid, ebalta-plast white or mahagony, Special light brown, 305 x 610 mm,
fast drying, very dense structure, sheets self adhesive,
polishable, free of pores smooth, 0.25-7 mm,
also available as spray 130 °C
T2 pasty, ebalta-lastic grey, high filling properties, Standard lemon yellow, 305 x 610 mm,
soft, easy to sand sheets self adhesive,
polishable soft, 1-6 mm, 64 °C
T7 pasty, well polishable, Fast curing brown,
resistant up to 130 °C modelpaste easy to work and sand Color pastes
Honey-Wax pasty, very well polishable, Repair- silver coloured, heat resistant, Colors red, blue, green, yellow,
resistant up to 160 °C paste repair metal or plastic white, black, brown
1711 Aerosol, contains silicone, Fibre- contains glass fibres,
resistant up to 125 °C polyester reinforcing Synthetic gypsum
Auxiliaries
PTFE Aerosol, contains teflon, Polyester unfilled, addition of various ebacryl L-1-Laminating-System
non-sticking, liquid fillers possible
heat and chemical resistant
PVA liquid, builds a shiny heat
and chemical resistant film,
removable with water Glass and carbon fibres Fillers
Stapel easy to drape, 170 g/m², Light fillers, filler F-A, F-B, F-alu, F-iron, F-G,
fibre cloth 280 g/m², 445 g/m² MF-paste, alu-granules, alu-powder, slate pow-
der, plastic granules, thixo 200, thixo 01,
Tooling aids cotton flocks, steel powder
Mould liquid, fast drying, sandable Glass fila- high strength, 163 g/m²,
sealer and sprayable, ment fabrics 280 g/m², 445 g/m²
seals rough surfaces such as
wood or gypsum Others
Sealer for liquid, Chopped length of fibre 6 mm Solvent cleaners, plastiline,
sheet wax fast drying, glass strands brushes, mixing pots,
prevents PVA-film from spray adhesive, hand cream,
sagging gloves, taps
Sealer liquid, fast drying, Carbon 93 g/m², 160 g/m², -
G1 sealing of ebazell-boards fibres 200g/m², 245 g/m²
11