• Like
MANUAL-BIOS 1
Upcoming SlideShare
Loading in...5
×
Uploaded on

 

More in: Technology
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
    Be the first to like this
No Downloads

Views

Total Views
14,620
On Slideshare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
48
Comments
0
Likes
0

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. Chapter 3: BIOS Setup Utility Chapter 3 BIOS Setup UtilityIntroductionThe BIOS Setup Utility records settings and information of your computer, such asdate and time, the type of hardware installed, and various configuration settings.Your computer applies the information to initialize all the components when boot-ing up and basic functions of coordination between system components.If the Setup Utility configuration is incorrect, it may cause the system to malfunc-tion. It can even stop your computer booting properly. If it happens, you can usethe clear CMOS jumper to clear the CMOS memory which has stored the configu-ration information; or you can hold down the Page Up key while rebooting yourcomputer. Holding down the Page Up key also clears the setup information.You can run the setup utility and manually change the configuration. You might needto do this to configure some hardware installed in or connected to the motherboard,such as the CPU, system memory, disk drives, etc.Running the Setup UtilityEvery time you start your computer, a message appears on the screen before theoperating system loading that prompts you to “Hit <DEL>if you want to runSETUP”. Whenever you see this message, press the Delete key, and the Mainmenu page of the Setup Utility appears on your monitor. CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc Standard CMOS Setup Frequency/Voltage Control Advanced Setup Load Default Settings Advanced Chipset Setup Supervisor Password Integrated Peripherals User Password Save & Exit Setup Power Management Setup Exit Without Saving PCI/PnP Setup PC Health Status : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default Settings V02.59 (C) Copyright 1985-2005, American Megatrends, Inc.You can use cursor arrow keys to highlight anyone of options on the main menupage. Press Enter to select the highlighted option. Press the Escape key to leavethe setup utility. Press +/-/ to modify the selected field’s values. 21
  • 2. Motherboard User’s GuideSome options on the main menu page lead to tables of items with installed valuesthat you can use cursor arrow keys to highlight one item, and press PgUp and PgDnkeys to cycle through alternative values of that item. The other options on the mainmenu page lead to dialog boxes requiring your answer OK or Cancel by selecting the[OK] or [Cancel] key.If you have already changed the setup utility, press F10 to save those changes andexit the utility. Press F1 to display a screen describing all key functions. Press F9to load optimal settings.Standard CMOS Setup PageThis page displays a table of items defining basic information of your system. CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Standard CMOS Setup Date Wed 11/24/2009 Help Item Time 16 : 02 : 00 Primary IDE Master Not Detected User [Enter], [TAB] Primary IDE Slave Not Detected or [SHIFT-TAB] to SATA1 Hard Disk select a field. SATA2 Not Detected Use [+] or [-] to configure system Date. IDE BusMaster Enabled : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default SettingsDate & TimeThe Date and Time items show the current date and time on the computer. If you arerunning a Windows OS, these items are automatically updated whenever you makechanges to the Windows Date and Time Properties utility.Primary IDE Master/Primary IDE SlaveUse these items to configure devices connected to the Primary IDE channels. Toconfigure an IDE hard disk drive, choose Auto. If the Auto setting fails to find a harddisk drive, set it to User, and then fill in the hard disk characteristics (Size, Cyls,etc.) manually. If you have a CD-ROM drive, select the setting CDROM. If youhave an ATAPI device with removable media (e.g. a ZIP drive or an LS-120), selectFloptical.SATA1/2These items display the status of auto detection of sata devices when “OnboardSATA-IDE” sets to “IDE”. 22
  • 3. Chapter 3: BIOS Setup UtilityIDE BusMasterThis item enables or disables the DMA under DOS mode. We recommend you toleave this item at the default value. IDE DevicesYour computer has one IDE channel which can be installed with one or two devices(Master and Slave). In addition, this motherboard supports two SATA channels and eachchannel allows one SATA device to be installed. Use these items to configure eachdevice on the IDE channel. CMOS SETUP UTILITY – Copyright (C) 1985-2005, American Megatrends, Inc. Primary IDE Master Primary IDE Master Help Item Device : ATAPI CDROM Select the type Vendor : DVD-ROM DDU1632 of device connected LBA Mode : Supported to the system. PIO Mode :4 Async DMA : MultiWord DMA-2 Ultra DMA : Ultra DMA-2 Type Auto PIO Mode Auto DMA Mode Auto : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default SettingsType (Auto)Use this item to configure the type of the IDE device that you specify. If the featureis enabled, it will enhance hard disk performance by reading or writing more data duringeach transfer.PIO ModeUse this item to set the PIO mode to enhance hard disk performance by optimizingthe hard disk timing.DMA ModeDMA capability allows user to improve the transfer-speed and data-integrity forcompatible IDE devices.Press <Esc> to return to the Standard CMOS Setup page.IDE BusMaster (Enabled)This item enables or disables the DMA under DOS mode. We recommend you to leavethis item at the default value.Press <Esc> to return to the main menu setting page. 23
  • 4. Motherboard User’s GuideAdvanced Setup PageThis page sets up more advanced information about your system. Handle this pagewith caution. Any changes can affect the operation of your computer. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc. Advanced Setup Thermal Management Enabled Help Item TM Status TM1/TM2 Limit CPUID MaxVal Disabled For the processor its Enhanced Halt (C1E) Enabled CPUID belows 0F14h. Intel XD Bit Disabled TM2 only can be enable Intel EIST Enabled under below settings. Quick Power on Self Test Enabled 1.Freq.>=3.6GHz FSB800 Boot Up Numlock Status On 2.Freq.>=2.8GHz FSB533 APIC Mode Enabled 1st Boot Device Hard Drive 2nd Boot Device CD/DVD 3rd Boot Device Removable Dev. Hard Disk Drives Press Enter CD/DVD Drivers Press Enter Boot Other Device Yes : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default SettingsThermal ManagementThis item displays CPU’s temperature and enables you to set a safe temperatureto Prescott CPU.TM StatusThis item displays CPU Monitor status.Limit CPUID MaxVal (Disabled)Use this item to enable or disable the Max CPU ID value limit. When supportsPrescott and LGA775 CPUs, enables this to prevent the system from “rebooting”when trying to install Windows NT 4.0.Enhanced Halt (C1E)This item enables or disables enhanced halt (C1E).Intel XD BitThis item allows users to enable or disable the Intel XD bit.Intel EISTThis item allows users to enable or disable the EIST (Enhanced Intel SpeedSteptechnology).Quick Power On Self TestEnable this item to shorten the power on self testing (POST) and have your systemstart up faster. You might like to enable this item after you confident that yoursystem hardware is operating smoothly.Boot Up NumLock StatusThis item determines if the NumLock key is active or inactive at system start-uptime. 24
  • 5. Chapter 3: BIOS Setup UtilityAPIC ModeThis item allows you to enable or disable the APIC (Advanced ProgrammableInterrupt Controller) mode. APIC provides symmetric multi-processing (SMP) forsystems, allowing support for up to 60 processors.1st/2nd/3rd Boot DeviceUse these items to determine the device order the computer uses to look for anoperating system to load at start-up time. Hard Disk Drives (Press Enter)Scroll to this item and press <Enter> to view the following screen: CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Hard Disk Drives Hard Disk Drives Help Item 1st Drive ST3160023AS Specifies the boot sequence from the available devices. : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default Settings CD/DVD Drivers (Press Enter)Scroll to this item and press <Enter> to view the following screen: CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. CD/DVD Drivers Drives CD/DVD Drivers Help Item 1st Drive TSSTcorpDVD-ROM TS- Specifies the boot sequence from the available devices. : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default SettingsPress <Esc> to return to the Advanced Setup page.Boot Other DeviceWhen it is set to “Yes”, the system searches all other possible locations foroperating system if it fails to find one in the devices specified under the First,Second, and Third boot devices. 25
  • 6. Motherboard User’s GuidePress <Esc> to return to the main menu page.Advanced Chipset Setup PageThis page sets up more advanced chipset information about your system. Handlethis page with caution. Any changes can affect the operation of your computer. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc. Advanced Chipset Setup DRAM Frequency Auto Help Item Configure DRAM Timing by SPD Enabled Options Share Memory Size 64MB DVMT Memory 256MB Auto Memory Remap Feature Enabled 800 MHz HPET Enabled 1066 MHz : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default SettingsDRAM Frequency (Auto)This item enables users to adjust the DRAM frequency. The default setting is autoand we recommend users leave the setting unchanged. Modify it at will may causethe system to be unstable.Configure DRAM Timing by SPD (Enabled)When this item is set to enable, the DDR timing is configured using SPD. SPD(Serial Presence Detect) is located on the memory modules, BIOS reads informa-tion coded in SPD during system boot up.Share Memory Size (64MB)This item lets you allocate a portion of the main memory for the onboard VGAdisplay application.DVMT Memory (256MB)When set to Fixed Mode, the graphics driver will reserve a fixed portion of thesystem memory as graphics memory, according to system and graphics requirements.Memory Remap Feature (Enabled)This item allows you to remap the overlapped PCI memory above the total physicalmemory if you have a 64 bit OS and 8 GB of RAM.HPET (Enabled)This item enables or disables HPET (High Precision Event Timer) support.Press <Esc> to return to the main menu setting page. 26
  • 7. Chapter 3: BIOS Setup UtilityIntegrated Peripherals PageThis page sets up some parameters for peripheral devices connected to the system. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc. Integrated Peripherals Onboard IDE Controller Enabled Help Item OnBoard SATA Controller Enhanced Onboard AUDIO Function Enabled DISABLED: disables the Onboard LAN Function Enabled integrated IDE Onboard LAN Boot ROM Disabled Controller. Serial Port1 Address 3F8/IRQ4 ENABLED: enables both Parallel Port Address 378 Controllers. Parallel Port Mode ECP ECP Mode DMA Channel DMA3 Parallel Port IRQ IRQ7 USB Functions Enabled Legacy USB Support Enabled : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default SettingsOnboard IDE ControllerUse this item to enable or disable the onboard IDE interface.Onboard SATA ControllerThis item allows you to enable or disable the onboard SATA controller.Onboard AUDIO FunctionUse this item to enable or disable the onboard audio device.Onboard LAN FunctionUse this item to enable or disable the onboard LAN function.Onboard LAN Boot ROMUse this item to enable or disable the booting from the onboard LAN or a networkadd-in card with a remote boot ROM installed.Serial Port1 AddressUse this item to enable or disable the onboard COM1 serial port, and to assign aport address.Parallel Port AddressUse this item to enable or disable the onboard Parallel port, and to assign a portaddress.Parallel Port ModeUse this item to select the parallel port mode. You can select Normal (StandardParallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), orBPP (Bi-Directional Parallel Port).ECP Mode DMA ChannelUse this item to assign the DMA Channel under ECP Mode function. 27
  • 8. Motherboard User’s GuideParallel Port IRQUse this item to assign IRQ to the parallel port.USB FunctionsUse this item to enable or disable the USB function.Legacy USB SupportUse this item to enable or disable support for legacy USB devices. Setting to Autoallows the system to detect the presence of USB device at startup. If detected, theUSB controller legacy mode is enabled. If no USB device is detected, the legacyUSB support is disabled.Press <Esc> to return to the main menu setting page.Power Management Setup PageThis page sets some parameters for system power management operation. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc. Power Management Setup ACPI Suspend Type S3 Help Item PWRON After PWR-Fail Power Off Resume By RING Disabled Select the ACPI Resume By PCI/PCI-E/Lan PME Disabled state used for Resume By PS2 KB (S3) Disabled System Suspend. Resume By PS2 MS (S3) Disabled Resume on RTC Alarm Disabled : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default SettingsACPI Suspend TypeUse this item to define how your system suspends. In the default, S3 (STR), thesuspend mode is a suspend to RAM, i.e., the system shuts down with the excep-tion of a refresh current to the system memory.PWRON After PWR-FailThis item enables your computer to automatically restart or return to its operatingstatus.Resume By RINGAn input signal on the serial Ring Indicator (RI) line (in other words, an incomingcall on the modem) awakens the system from a soft off state. 28
  • 9. Chapter 3: BIOS Setup UtilityResume By PCI/PCI-E/Lan PMEThese items specify whether the system will be awakened from power savingmodes when activity or input signal of the specified hardware peripheral or compo-nent is detected.Resume By PS2 KB (S3)This item enable or disable you to allow keyboard activity to awaken the systemfrom power saving mode.Resume By PS2 MS (S3)This item enable or disable you to allow mouse activity to awaken the system frompower saving mode.Resume on RTC AlarmThe system can be turned off with a software command. If you enable this item, thesystem can automatically resume at a fixed time based on the system’s RTC (realtimeclock). Use the items below this one to set the date and time of the wake-up alarm.You must use an ATX power supply in order to use this feature.Press <Esc> to return to the main menu setting page.PCI / PnP Setup PageThis page sets up some parameters for devices installed on the PCI bus and thoseutilizing the system plug and play capability. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc. PCI / PnP Setup Init Display First PCI Help Item Select which graphics controller to use as the primary boot device. : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default SettingsInit Dispaly FirstThis item allows you to choose the primary display card.Press <Esc> to return to the main menu setting page. 29
  • 10. Motherboard User’s GuidePCI Health Status PageThis page helps you monitor the parameters for critical voltages, temperatures andfan speeds. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc. PC Health Status Help Item -=- System Hardware Monitor-=- Smart Fan Function Press Enter CPU Fan Speed : 1134 RPM CPU Vcore : 1.216 V VDIMM : 1.472 V Case Open Warning Disabled Chassis Opened No -=- PECI Mode-=- Offset to TCC Activation Temp.: -56 : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default Settings Smart Fan FunctionScroll to this item and press <Enter> to view the following screen: CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item Smart Fan Function Enabled SMART Fan Mode Normal Options SMART Fan start PWM value 28 Disabled CPU DeltaT +3 Enabled SMART Fan start Offset (-) 32 Fan1 Slope PWM value/1 Unite 5 Fan1 Full Speed Offset(-) 7 : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default SettingsSMART Fan Control (Enabled)This item allows you to enable/disable the control of the CPU fan speed bychanging the fan voltage.SMART Fan Mode (Normal)This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) fora better operation environment. If you choose Normal mode, the fan speed will beauto adjusted depending on the CPU temperature. If you choose Quite mode, thefan speed will be auto minimized for quiet environment. If you choose Silentmode, the fan speed will be auto restricted to make system more quietly. If youchoose Manual mode, the fan speed will be adjust depending on users’ parameters.Press <Esc> to return to the PC Health Status page. 30
  • 11. Chapter 3: BIOS Setup Utility CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item Smart Fan Function Enabled SMART Fan Mode Normal Options SMART Fan start PWM value 28 Normal: auto adjusts CPU DeltaT +3 depending on the CPU SMART Fan start Offset (-) 32 temperature. Fan1 Slope PWM value/1 Unite 5 Quiet: auto minimizes fan Fan1 Full Speed Offset(-) 7 speed for quiet environment operation. Silent: auto restricts fan speed to make system more quietly. Manual: the fan adjust depending on user’s parameter. : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default SettingsPress <Esc> to return to the Smart Fan Function page. CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item Smart Fan Function Enabled SMART Fan Mode Normal Options SMART Fan start PWM value 28 Normal: auto adjusts CPU DeltaT +3 depending on the CPU SMART Fan start Offset (-) 32 temperature. Fan1 Slope PWM value/1 Unite 5 Quiet: auto minimizes fan Fan1 Full Speed Offset(-) 7 speed for quiet environment operation. Silent: auto restricts fan speed to make system more quietly. Manual: the fan adjust depending on user’s parameter. : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default SettingsPress <Esc> to return to the Smart Fan Function page. 31
  • 12. Motherboard User’s Guide CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item Smart Fan Function Enabled Options SMART Fan Mode Quiet Normal: auto adjusts SMART Fan start PWM value 28 depending on the CPU CPU DeltaT +3 temperature. SMART Fan start Offset (-) 32 Fan1 Slope PWM value/1 Unite 5 Quiet: auto minimizes fan Fan1 Full Speed Offset(-) 7 speed for quiet environment operation. Silent: auto restricts fan speed to make system more quietly. Manual: the fan adjust depending on user’s parameter. : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default SettingsPress <Esc> to return to the Smart Fan Function page. CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item Smart Fan Function Enabled Options SMART Fan Mode Silent Normal: auto adjusts SMART Fan start PWM value 28 depending on the CPU CPU DeltaT +3 temperature. SMART Fan start Offset (-) 32 Fan1 Slope PWM value/1 Unite 5 Quiet: auto minimizes fan Fan1 Full Speed Offset(-) 7 speed for quiet environment operation. Silent: auto restricts fan speed to make system more quietly. Manual: the fan adjust depending on user’s parameter. : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default SettingsPress <Esc> to return to the Smart Fan Function page. 32
  • 13. Chapter 3: BIOS Setup Utility CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item Smart Fan Function Enabled Options SMART Fan Mode Manual Normal: auto adjusts SMART Fan start PWM value 28 depending on the CPU CPU DeltaT +3 temperature. SMART Fan start Offset (-) 32 Fan1 Slope PWM value/1 Unite 5 Quiet: auto minimizes fan Fan1 Full Speed Offset(-) 7 speed for quiet environment operation. Silent: auto restricts fan speed to make system more quietly. Manual: the fan adjust depending on user’s parameter. : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default SettingsPress <Esc> to return to the Smart Fan Function page. Supports the latest PECI host technology. While using CoreTM 2 Quad or CoreTM 2 Duo CPU which supports PECI, the original images of the BIOS item “PC Health Status” and “Smart FAN Function” will be replaced by PECI mode and negative number. (The max data from PECI is zero.) CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. PC Health Status Help Item -=- System Hardware Monitor-=- Smart Fan Function Press Enter CPU Fan Speed : 2509 RPM CPU Vcore : 1.088 V VDIMM : 1.824 V -=- PECI Mode -=- Offset to TCC Activation Temp. : -60 : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default Settings CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Smart Fan Function Help Item SMART Fan Control Disabled Options Disabled Enabled : Move Enter : Select +/-/: Value F10: Save ESC: Exit F1: General Help F9: Load Default SettingsPress <Esc> to return to the PC Health Status page. 33
  • 14. Motherboard User’s GuideShutdown TemperatureEnable you to set the maximum temperature the system can reach before poweringdown.System Component CharacteristicsThese items display the monitoring of the overall inboard hardware health events,such as System & CPU temperature, CPU & DIMM voltage, CPU & system fanspeed,...etc. • CPU Temperature • CPU Fan Speed • CPU Vcore • VDIMM • VBATCase Open Warning (Disabled)This item enables or disables the warning if the case is opened up, and the itembelow indicates the current status of the case.Chassis Opened (No)This item indicates whether the case has been opened.Press <Esc> to return to the main menu setting page.Frequency/Voltage Control PageThis page helps you to set the clock speed and system bus for your system. Theclock speed and system bus are determined by the kind of processor you haveinstalled in your system. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc. Frequncey/Voltage Control Manufacturer : Intel Help Item Ratio Actual Value : 7 CPU Frequency : 333MHz Options Auto Detect DIMM/PCI CIK Enabled Disabled Spread Spectrum Enabled Enabled : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default SettingsManufacturerThis item indicates the brand of the CPU installed in your system.Ratio Actual ValueThis item shows the actual ratio of the CPU installed in your system. 34
  • 15. Chapter 3: BIOS Setup UtilityCPU FrequencyThis item indicates the current CPU frequency. Users can not make any change tothis item. Please noted that the frequency will be varied with different CPU.CPU Frequency Setting (333MHz)This item is used to set the CPU Frequency.Auto Detect DIMM/PCI Clk (Enabled)When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.Spread Spectrum (Enabled)If you enable spread spectrum, it can significantly reduce the EMI (Electro-MagneticInterference) generated by the system.Press <Esc> to return to the main menu setting page.Load Default SettingsThis option opens a dialog box that lets you install stability-oriented defaults forall appropriate items in the Setup Utility. Select <OK> and then press <Enter> toinstall the defaults. Select <Cancel> and then press <Enter> to not install thedefaults.Supervisor Password PageThis page helps you set up some parameters for the hardware monitoringfunction of this motherboard. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc. Supervisor Password Supervisor Password : Not Installed Help Item Change Supervisor Password Press Enter Installed or Change the password. : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default SettingsSupervisor PasswordThis item indicates whether a supervisor password has been set. If the passwordhas been installed , Installed displays. If not, Not Installed dispalys.Change Supervisor PasswordYou can select this option and press<Enter> to access the sub menu. You can usethe sub menu to change the supervisor password.Press <Esc> to return to the main menu setting page. 35
  • 16. Motherboard User’s GuideUser Password PageThis page helps you set up some parameters for the hardware monitoringfunction of this motherboard. CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc. User Password User Password : Not Installed Help Item Change User Password Press Enter : Move Enter: Select +/-/: Value F10: Save Esc: Exit F1: General Help F9: Load Default SettingsUser Password (Not Installed)This item indicates whether a user password has been set. If the password has beeninstalled, Installed displays. If not, Not Installed displays.Change User Password (Press Enter)You can select this option and press <Enter> to access the sub menu. You can usethe sub menu to change the user password.Press <Esc> to return to the main menu setting page.Save & Exit SetupHighlight this item and press <Enter> to save the changes that you have made in theSetup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,press [OK] to save and exit, or press [Cancel] to return to the main menu.Exit Without SavingHighlight this item and press <Enter> to discard any changes that you have made inthe Setup Utility and exit the Setup Utility. When the Exit Without Saving dialogbox appears, press [OK] to discard changes and exit, or press [Cancel] to return tothe main menu.Note: If you have made settings that you do not want to save, use the “Exit Without Saving” item and presst [OK] to discard any changes you have made. 36