ROP SYSTEM WALL

835 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
835
On SlideShare
0
From Embeds
0
Number of Embeds
100
Actions
Shares
0
Downloads
3
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

ROP SYSTEM WALL

  1. 1. ROP Construction, Inc.ROP Wall System(Tilt-up Construction)<br />Better Wall System<br /> copyrighted 2007<br />
  2. 2. ROP Wall System<br />Interior and Exterior Walls of<br />2-1/4” to 2-3/4” <br />(ready to paint)<br /> copyrighted 2007<br />Better Wall System<br />
  3. 3. ROP Wall System<br />. Stronger. OPTIMIZED structure. Spacious. Faster. 50% - 75% Lighter<br />. Economical<br />. Proven<br />
  4. 4. ROP Wall System<br />STRONGER<br />. Stronger since ROP wall is<br /> SOLID like a vertical slab.<br />.ROP Wall may be inserted with<br /> the columns and beams before<br /> pouring, thus making the walls,<br /> columns, and beams monolithic or acting as a single unit, therefore stronger.<br />
  5. 5. ROP Wall System<br />OPTIMIZED STRUCTURE<br />.ROP Wall is Load Bearing up to 2,500 psi.<br />. ROP Wall can prop the beam and<br /> directly transfer the load to the columns<br /> using embedded truss system. This<br /> makes ROP Wall System much better.<br /> What used to be a simple partition is now<br /> optimized structurally in making the<br /> building stronger and more economical.<br />
  6. 6. ROP Wall System<br />Optimized Structure<br /> Embedded Truss System<br />Load<br />Load<br />Load = (floor loads, beam, wall)<br />Load may be 1 to 3 floors<br />Beam<br />COMPRESSION<br />COMPRESSION<br />column<br />column<br />Beam<br />TENSION<br />
  7. 7. ROP Wall System<br />Optimized Structure<br />Embedded Truss System <br /> (High Rise)<br />Earthquake<br />Load<br />A break in the truss system on every 3rd level minimizes the load transfer on the wall during wind and earthquake. Up to 67% of the load Is absorbed by the wall, thus relieving the columns and beams of stresses.<br />
  8. 8. ROP Wall System<br />Spacious<br />. Additional 2.75” to 4.75” more<br /> space on all walls.<br />. The columns and beams are<br /> smaller due to wall load reduction <br /> plus the wall can prop the beam and<br /> carry the load instead.<br />.<br />
  9. 9. ROP Wall System<br />Faster <br />.In 3 days the wall is tilted with<br /> all the jambs, electrical and<br /> plumbing fixtures already<br /> installed. <br />. When erected, the wall is ready<br /> to paint and serves as shoring<br /> for the beams.<br />
  10. 10. ROP Wall System<br />Lighter<br />. ROP wall system is very strong<br /> yet much lighter by 50% thus<br /> making the building safer<br /> during earthquake.<br />
  11. 11. ROP Wall System<br />ECONOMICAL<br />. ROP Wall system uses only 50% of the concrete used by<br /> CHB walls.<br />. The jambs, electrical and plumbing are<br /> embedded on the wall during casting unlike in<br /> CHB where the wall is chip off to provide <br /> electrical and plumbing lines.<br />. No need for heavy equipment like cranes which<br /> makes construction convenient and economical.<br />
  12. 12. ROP Wall System<br />Proven<br />. It’s more than 25 years in usage<br />. Over 1,000 units built<br />. NHA accredited<br />. Aitech accredited<br />. Registered Philippine Patent<br />. Used by Filinvest<br />

×