Your SlideShare is downloading. ×
0
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Skill final-resuelto
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×
Saving this for later? Get the SlideShare app to save on your phone or tablet. Read anywhere, anytime – even offline.
Text the download link to your phone
Standard text messaging rates apply

Skill final-resuelto

2,113

Published on

ejercio practico de redes en packet trace

ejercio practico de redes en packet trace

Published in: Technology
1 Comment
0 Likes
Statistics
Notes
  • Be the first to like this

No Downloads
Views
Total Views
2,113
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
187
Comments
1
Likes
0
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. Caso Final CCNA 1RED: 172.20.0.0 /21Centro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 2. REPRESENTACIÓN GRÁFICACentro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 3. 1. SUBNETEO DE RED: 172.20.0.0 /21 Red Direccion de Red Rango BroadCast Mascara LAN1 172.20.0.0 /21 172.20.0.0 172.20.0.1 - 172.20.7.254 172.20.7.255 255.255.248.01.1 172.20.0.0 /22 172.20.0.0 172.20.0.1 - 172.20.3.254 172.20.3.255 255.255.252.0 RED A1.2 172.20.4.0 /22 172.20.4.0 172.20.4.1 - 172.20.7.254 172.20.7.255 255.255.252.01.2.1 172.20.4.0 /23 172.20.4.0 172.20.4.1 - 172.20.5.254 172.20.5.255 255.255.254.0 RED B1.2.2 172.20.6.0 /23 172.20.6.0 172.20.6.1 - 172.20.7.254 172.20.7.255 255.255.254.01.2.2.1 172.20.6.0 /24 172.20.6.0 172.20.6.1 - 172.20.6.254 172.20.6.255 255.255.255.01.2.2.2 172.20.7.0 /24 172.20.7.0 172.20.7.1 - 172.20.7.254 172.20.7.255 255.255.255.01.2.2.2.1 172.20.7.0 /25 172.20.7.0 172.20.7.1 - 172.20.7.126 172.20.7.127 255.255.255.128 RED D1.2.2.2.2 172.20.7.128 /25 172.20.7.128 172.20.7.129 - 172.20.7.254 172.20.7.255 255.255.255.1281.2.2.2.2.1 172.20.7.128 /26 172.20.7.128 172.20.7.129 - 172.20.7.190 172.20.7.191 255.255.255.1921.2.2.2.2.2 172.20.7.192 /26 172.20.7.192 172.20.7.193 - 172.20.7.254 172.20.7.255 255.255.255.1921.2.2.2.2.2.1 172.20.7.192 /27 172.20.7.192 172.20.7.193 - 172.20.7.222 172.20.7.223 255.255.255.224 RED C1.2.2.2.2.2.2 172.20.7.224 /27 172.20.7.224 172.20.7.225 - 172.20.7.254 172.20.7.255 255.255.255.2241.2.2.2.2.2.2.1 172.20.7.224 /28 172.20.7.224 172.20.7.225 - 172.20.7.238 172.20.7.239 255.255.255.2401.2.2.2.2.2.2.2 172.20.7.240 /28 172.20.7.240 172.20.7.241 - 172.20.7.254 172.20.7.255 255.255.255.2401.2.2.2.2.2.2.2.1 172.20.7.240 /29 172.20.7.240 172.20.7.241 - 172.20.7.246 172.20.7.247 255.255.255.2481.2.2.2.2.2.2.2.1.1 172.20.7.240 /30 172.20.7.240 172.20.7.241 - 172.20.7.242 172.20.7.243 255.255.255.252 RED G1.2.2.2.2.2.2.2.1.2 172.20.7.244/30 172.20.7.244 172.20.7.245 - 172.20.7.246 172.20.7.247 255.255.255.2521.2.2.2.2.2.2.2.2 172.20.7.248 /29 172.20.7.248 172.20.7.249 - 172.20.7.254 172.20.7.255 255.255.255.2481.2.2.2.2.2.2.2.2.1 172.20.7.248 /30 172.20.7.248 172.20.7.249 - 172.20.7.250 172.20.7.251 255.255.255.252 RED E1.2.2.2.2.2.2.2.2.2 172.20.7.252 /30 172.20.7.252 172.20.7.253 - 172.20.7.254 172.20.7.255 255.255.255.252 RED FCentro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 4. 2. SERVIDORES CAMPUS USS:  MAIL  DHCP Centro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 5. CAMPUS UCV  DHCP-UCVMAESTRÍA:  DHCP-MaestríaCentro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 6. CENTRO DE IDIOMAS  WEB  DNSCentro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 7. 3. ROUTER: ROUTER 0: Press RETURN to get started. Router>enable Router#conf term Enter configuration commands, one per line. End with CNTL/Z. Router(config)#inter seri 0/0/0 Router(config-if)#ip add 172.20.7.249 255.255.255.252 Router(config-if)#clock rate 56000 Router(config-if)#no shutdown %LINK-5-CHANGED: Interface Serial0/0/0, changed state to down Router(config-if)#exit Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#show running-config Building configuration... Current configuration : 594 bytes version 12.4 no service timestamps log datetime msec no service timestamps debug datetime msec no service password-encryption hostname Router --More-- Router con0 is now available Press RETURN to get started. %LINK-5-CHANGED: Interface Serial0/0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up interface FastEthernet0/0 ip address 172.20.0.1 255.255.252.0 duplex auto speed auto interface FastEthernet0/1 no ip address duplex auto speed auto shutdown interface Serial0/0/0 ip address 172.20.7.249 255.255.255.252 clock rate 56000 interface Serial0/0/1 --More-- no ip address shutdown interface Vlan1 no ip address shutdown ip classless line con 0 line vty 0 4 login end Router>enable Router#conf term Enter configuration commands, one per line. End with CNTL/Z. Router(config)#router rip Router(config-router)#version 2 Centro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 8. Router(config-router)#network 172.20.0.0Router(config-router)#network 172.20.7.248Router(config-router)#exitRouter(config)#exitRouter#%SYS-5-CONFIG_I: Configured from console by consoleRouter#enableRouter#show ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static routeGateway of last resort is not set 172.20.0.0/16 is variably subnetted, 7 subnets, 5 masksC 172.20.0.0/22 is directly connected, FastEthernet0/0R 172.20.4.0/23 [120/1] via 172.20.7.250, 00:00:12, Serial0/0/0R 172.20.7.0/25 [120/2] via 172.20.7.250, 00:00:12, Serial0/0/0R 172.20.7.192/27 [120/2] via 172.20.7.250, 00:00:12, Serial0/0/0R 172.20.7.240/30 [120/1] via 172.20.7.250, 00:00:12, Serial0/0/0C 172.20.7.248/30 is directly connected, Serial0/0/0R 172.20.7.252/30 [120/1] via 172.20.7.250, 00:00:12, Serial0/0/0ROUTER 01:--- System Configuration Dialog ---Continue with configuration dialog? [yes/no]: nPress RETURN to get started!Router>enableRouter#conf termEnter configuration commands, one per line. End with CNTL/Z.Router(config)#inter fas 0/0Router(config-if)#ip add 172.20.4.1 255.255.254.0Router(config-if)#no sh%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upRouter(config-if)#exitRouter(config)#inter ser 0/0/0Router(config-if)#ip add 172.20.7.250 255.255.255.252Router(config-if)#no sh%LINK-5-CHANGED: Interface Serial0/0/0, changed state to upRouter(config-if)#%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to upRouter(config-if)#exitRouter(config)#inter ser 0/1/0Router(config-if)#ip add 172.20.7.253 255.255.255.252Router(config-if)#clock rate 56000Router(config-if)#no sh%LINK-5-CHANGED: Interface Serial0/1/0, changed state to downRouter(config-if)#exitRouter(config)#inter ser 0/0/1Router(config-if)#Router(config-if)#ip add 172.20.7.241 255.255.255.252Centro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 9. Router(config-if)#clock rate 56000Router(config-if)#no sh%LINK-5-CHANGED: Interface Serial0/0/1, changed state to downRouter(config-if)#exitRouter(config)#exitRouter#%SYS-5-CONFIG_I: Configured from console by consoleRouter#Router con0 is now availablePress RETURN to get started.%LINK-5-CHANGED: Interface Serial0/1/0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up%LINK-5-CHANGED: Interface Serial0/0/1, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to upRouter>enableRouter#conf termEnter configuration commands, one per line. End with CNTL/Z.Router(config)#route ripRouter(config-router)#version 2Router(config-router)#network 172.20.7.248Router(config-router)#network 172.20.4.0Router(config-router)#network 172.20.7.252Router(config-router)#network 172.20.7.240Router(config-router)#Router#%SYS-5-CONFIG_I: Configured from console by consoleRouter#show ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static routeGateway of last resort is not set 172.20.0.0/16 is variably subnetted, 5 subnets, 3 masksR 172.20.0.0/22 [120/1] via 172.20.7.249, 00:00:06, Serial0/0/0C 172.20.4.0/23 is directly connected, FastEthernet0/0C 172.20.7.240/30 is directly connected, Serial0/0/1C 172.20.7.248/30 is directly connected, Serial0/0/0C 172.20.7.252/30 is directly connected, Serial0/1/0Router#ROUTER 2:--- System Configuration Dialog ---Continue with configuration dialog? [yes/no]: noPress RETURN to get started!Router>enableRouter#conf termEnter configuration commands, one per line. End with CNTL/Z.Router(config)#inter fas 0/0Router(config-if)#ip add 172.20.7.1 255.255.255.128Router(config-if)#no sh%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upRouter(config-if)#exitCentro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 10. Router(config)#inter serial 0/0/1Router(config-if)#ip add 172.20.7.242 255.255.255.252Router(config-if)#no sh%LINK-5-CHANGED: Interface Serial0/0/1, changed state to upRouter(config-if)#%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to upRouter con0 is now availablePress RETURN to get started.Router>enableRouter#conf termEnter configuration commands, one per line. End with CNTL/Z.Router(config)#router ripRouter(config-router)#version 2Router(config-router)#network 172.20.7.0Router(config-router)#network 172.20.7.240Router(config-router)#exitRouter(config)#exitRouter#%SYS-5-CONFIG_I: Configured from console by consoleRouter#show ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static routeGateway of last resort is not set 172.20.0.0/16 is variably subnetted, 7 subnets, 5 masksR 172.20.0.0/22 [120/2] via 172.20.7.241, 00:00:13, Serial0/0/1R 172.20.4.0/23 [120/1] via 172.20.7.241, 00:00:13, Serial0/0/1C 172.20.7.0/25 is directly connected, FastEthernet0/0R 172.20.7.192/27 [120/2] via 172.20.7.241, 00:00:13, Serial0/0/1C 172.20.7.240/30 is directly connected, Serial0/0/1R 172.20.7.248/30 [120/1] via 172.20.7.241, 00:00:13, Serial0/0/1R 172.20.7.252/30 [120/1] via 172.20.7.241, 00:00:13, Serial0/0/1Router#Router con0 is now availablePress RETURN to get started.ROUTER 3 --- System Configuration Dialog ---Continue with configuration dialog? [yes/no]: nPress RETURN to get started!Router>enableRouter#conf termEnter configuration commands, one per line. End with CNTL/Z.Router(config)#inter fas 0/0Router(config-if)#^ZRouter#%SYS-5-CONFIG_I: Configured from console by consoleRouter#conf termEnter configuration commands, one per line. End with CNTL/Z.Router(config)#inter fas 0/0Centro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 11. Router(config-if)#ip add 172.20.7.193 255.255.255.224Router(config-if)#no sh%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upRouter(config-if)#exitRouter(config)#inter serial 0/1/0Router(config-if)#ip add 172.20.7.254 255.255.255.252Router(config-if)#no sh%LINK-5-CHANGED: Interface Serial0/1/0, changed state to upRouter(config-if)#exitRouter(config)#%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to upRouter(config)#exitRouter#%SYS-5-CONFIG_I: Configured from console by console%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upRouter con0 is now availablePress RETURN to get started.Router>Router>enableRouter#conf termEnter configuration commands, one per line. End with CNTL/Z.Router(config)#router ripRouter(config-router)#version 2Router(config-router)#network 172.20.7.192Router(config-router)#network 172.20.7.252Router(config-router)#exitRouter#show ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static routeGateway of last resort is not set 172.20.0.0/16 is variably subnetted, 6 subnets, 4 masksR 172.20.0.0/22 [120/2] via 172.20.7.253, 00:00:20, Serial0/1/0R 172.20.4.0/23 [120/1] via 172.20.7.253, 00:00:20, Serial0/1/0C 172.20.7.192/27 is directly connected, FastEthernet0/0R 172.20.7.240/30 [120/1] via 172.20.7.253, 00:00:20, Serial0/1/0R 172.20.7.248/30 [120/1] via 172.20.7.253, 00:00:20, Serial0/1/0C 172.20.7.252/30 is directly connected, Serial0/1/0Router#writerTranslating "writer"...domain server (255.255.255.255)% Unknown command or computer name, or unable to find computer addressRouter#conf termEnter configuration commands, one per line. End with CNTL/Z.Router#wrBuilding configuration...[OK]Router#Centro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz
  • 12. 4. SERVIDORES  MAIL  DNS Centro de Informática y Sistemas Computación III Ing. Carlos Rojas Ortiz

×