Micro MATE-N-LOK 3mm Connector System <ul><li>Source: Tyco Electronics </li></ul>
Introduction <ul><li>Purpose </li></ul><ul><ul><li>This training module covers the performance and requirements for applic...
Low Profile Micro MATE-N-LOK  Connector System <ul><li>Features </li></ul><ul><li>New Side Latch Feature allows for an ult...
Product Description <ul><li>Wire-to-board connector system </li></ul><ul><li>High density 3mm centerline </li></ul><ul><li...
Applications <ul><li>Instrumentation </li></ul><ul><li>Industrial machinery </li></ul><ul><li>Home equipment </li></ul><ul...
Wire-to-Wire   and   Wire-to-Panel   Applications Single Row Dual Row Free-hanging Free-hanging Panel Mount Panel Mount
Wire-to-Board Application Single Row Dual Row
Crimp, Snap-In Contacts Material and Finish Receptacle  — Phosphor Bronze Plug  — Brass Plating A  — .00006 - .00016 [0.00...
Receptacle Housings Single row Dual row
Plug Housings Single Row, Free Hanging Single Row, Panel Mount Dual Row, Free Hanging
Pin Header Connector
Wire Selection and Preparation <ul><li>The contacts will accept stranded wire sizes 30 through 20 AWG with an insulation d...
Additional Resource <ul><li>For ordering the Micro Mate-N-LOK connector system, please click the  part list  or </li></ul>...
Upcoming SlideShare
Loading in …5
×

Micro MATE-N-LOK 3mm Connector System

878 views
767 views

Published on

Introduction of the performance and requirements for application of Micro MATE-N-LOK connector family

Published in: Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
878
On SlideShare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • Welcome to the training module on Micro MATE-N-LOK 3mm Connector System. This training module covers the performance and requirements for application of Micro MATE-N-LOK connector family.
  • The connector has an integral positive latching housing to prevent connector unmating. The polarized housings help to prevent connector mismating. The connector utilizes standard micro MATE-N-LOK contacts. The side latch design allows for an ultra-low profile.
  • The Micro MATE-N-LOK 3mm connector system is a wire-to-wire and wire-to board connector system with contacts on a 3mm [.118] centreline. Both single-row and dual-row configurations are available. Crimp, snap-in pin and receptacle contacts are used to terminate 24-20 [0.2-0.6] and 30-26 [0.05-0.15] AWG wire. Plug and receptacle housings allow wire-to-wire and wire-to-panel configurations. Header assemblies for wire- to-board interconnections include vertical and right angle components. IR reflow, process-compatible headers are available in through-hole and surface mount configurations.
  • Typical uses of the Micro MATE-N-LOK 3mm connector system include the appliance, instrumentation, industrial machinery, home equipment, security system, and LED lighting applications.
  • Here shows the micro MATE-N-LOK connectors for wire-to-wire and wire-to-panel applications.
  • Here shows the micro MATE-N-LOK connectors for wire-to-board applications.
  • The contacts are available in loose–piece for terminating with manual hand–held tools, and in strip form for terminating with semi–automatic or automatic electrically–powered machines. The contacts have locking lances that will engage the housing retention shoulder in either contact orientation and prevent backing out during mating of the connector. Receptacle contacts are for use with receptacle housings only. Do not insert receptacle contacts into plug housings. Plug contacts are for use with plug housings only. Do not insert plug contacts into receptacle housings.
  • The receptacle housings are available for panel mount, free–hanging wire–to–wire, and wire-to-board applications. The receptacle housing accepts only Micro MATE–N–LOK receptacle contacts sizes for 30–26 or 24–20 AWG wire. They are made of flame–retardant black thermoplastic. To ensure proper placement, the contact orientation barrel aligns with an orientation feature on the receptacle contact cavity. The contact must be inserted into the housing contact cavity and snapped into place. When fully inserted, the contact locking lance will engage the receptacle contact retention shoulder and prevent backing out during mating of the connectors.
  • The plug housings are available for panel mount or free–hanging wire–to–wire applications. The plug housing accepts only Micro MATE–N–LOK plug contacts sizes for 30–26 or 24–20 AWG wire. The plug contact can be inserted into the plug housing in one of two orientations 180° opposite of each other.
  • The pin header is available, for wire–to–board applications, in vertical or right angle configurations for through hole mount application or surface mount technology (SMT). The pin header contains pre–installed solder type contacts with precision formed solder tines. The pin header is available with integral boardlocks (mechanical or plastic) or surface mount boardlocks (contacts with a board retention feature). These boardlocks provide stability for connector placement on the pc board. The connectors are placed on the PCB by hand application tooling or electrically–powered machines. The pin header housings are made of flame retardant high–temperature black thermoplastic to facilitate the soldering process. The mechanical boardlocks are made of phosphor bronze plated with tin and the plastic boardlocks are made of plastic.
  • The contacts will accept stranded wire sizes 30 through 20 AWG with an insulation diameter range of 0.89 to 1.53. Proper strip length is necessary to properly insert the wire into the contact. The strip length of the wire is shown in the figure. Reasonable care must be taken not to nick, scrape, or cut any strands during the stripping operation.
  • Thank you for taking the time to view this presentation on “ Micro MATE-N-LOK 3mm Connector System ” . If you would like to learn more or go on to purchase some of these devices, you may either click on the part list link, or simple call our sales hotline. For more technical information you may either visit the Tyco Electronics site, or if you would prefer to speak to someone live, please call our hotline number, or even use our ‘live chat’ online facility.
  • Micro MATE-N-LOK 3mm Connector System

    1. 1. Micro MATE-N-LOK 3mm Connector System <ul><li>Source: Tyco Electronics </li></ul>
    2. 2. Introduction <ul><li>Purpose </li></ul><ul><ul><li>This training module covers the performance and requirements for application of Micro MATE-N-LOK connector family. </li></ul></ul><ul><li>Outline </li></ul><ul><ul><li>Product Features </li></ul></ul><ul><ul><li>Target applications </li></ul></ul><ul><ul><li>Different parts in Micro MATE-N-LOK connector family </li></ul></ul><ul><ul><li>Requirements for handling this connector family </li></ul></ul><ul><li>Content </li></ul><ul><ul><li>13 pages </li></ul></ul>
    3. 3. Low Profile Micro MATE-N-LOK Connector System <ul><li>Features </li></ul><ul><li>New Side Latch Feature allows for an ultra-low profile (less than 4.7mm). </li></ul><ul><li>Positive latching housings help prevent connector unmating </li></ul><ul><li>Polarized housings help prevent connector mismating </li></ul><ul><li>Surface mount hold-downs provide robust header support </li></ul><ul><li>Utilizes standard Micro MATE-N-LOK contacts </li></ul>Standard Micro MATE-N-LOK Top Latch Receptacle Low Profile Side Latch Design 45% Reduction 4.7mm
    4. 4. Product Description <ul><li>Wire-to-board connector system </li></ul><ul><li>High density 3mm centerline </li></ul><ul><li>Side latch housings </li></ul><ul><li>Right angle surface mount headers </li></ul><ul><li>2, 3, or 4 circuit positions </li></ul><ul><li>Rated for 5A and 250 V </li></ul><ul><li>Black and natural colors available </li></ul><ul><li>24-20 and 30-26 AWG wire range </li></ul>
    5. 5. Applications <ul><li>Instrumentation </li></ul><ul><li>Industrial machinery </li></ul><ul><li>Home equipment </li></ul><ul><li>Security system </li></ul><ul><li>LED lighting Applications </li></ul><ul><ul><li>Consumer Lighting </li></ul></ul><ul><ul><ul><li>Shelf / Cabinet Lighting </li></ul></ul></ul><ul><ul><ul><li>Under-Counter Illumination </li></ul></ul></ul><ul><ul><ul><li>Cove Lighting </li></ul></ul></ul><ul><ul><li>Commercial Lighting </li></ul></ul><ul><ul><ul><li>Signage </li></ul></ul></ul><ul><ul><ul><li>Freezer / Refrigerator </li></ul></ul></ul><ul><ul><li>Display Case </li></ul></ul>
    6. 6. Wire-to-Wire and Wire-to-Panel Applications Single Row Dual Row Free-hanging Free-hanging Panel Mount Panel Mount
    7. 7. Wire-to-Board Application Single Row Dual Row
    8. 8. Crimp, Snap-In Contacts Material and Finish Receptacle — Phosphor Bronze Plug — Brass Plating A — .00006 - .00016 [0.0015- 0.0040] tin-lead Plating B — .000015 [0.00038] gold in mating area, tin-lead on termination end, with entire contact nickel underplated Plating C — .000030 [0.00076] gold in mating area, tin-lead on termination end, with entire contact nickel underplated.
    9. 9. Receptacle Housings Single row Dual row
    10. 10. Plug Housings Single Row, Free Hanging Single Row, Panel Mount Dual Row, Free Hanging
    11. 11. Pin Header Connector
    12. 12. Wire Selection and Preparation <ul><li>The contacts will accept stranded wire sizes 30 through 20 AWG with an insulation diameter range of 0.89 to 1.53. </li></ul><ul><li>Proper strip length is necessary to properly insert the wire into the contact. </li></ul><ul><li>Reasonable care must be taken not to nick, scrape, or cut any strands during the stripping operation. </li></ul>The strip length of the wire
    13. 13. Additional Resource <ul><li>For ordering the Micro Mate-N-LOK connector system, please click the part list or </li></ul><ul><li>Call our sales hotline </li></ul><ul><li>For additional inquires contact our technical service hotline </li></ul><ul><li>For more product information go to </li></ul><ul><ul><li>http://www.tycoelectronics.com/industry/appliance/pdf/catalogs/82181_SoftShell.pdf </li></ul></ul>

    ×