YERKON MENTALITY: HIGHER CAPACITY As a result of gravity effect, waste get pressed by itself. Old waste is covered by the new ones. It can contain 3 times more waste compared to the surface bins. Vertical construction has an advantage of placing 60% of the container in underground. The total height of underground part is 1.5 meters. HYGIENIC Coolness of the ground keeps the bacterial development slow and it prevents bad smell problem. Filling lid closed by itself prevents unpleasant view of the waste. In addition, animals can’t take the garbage out. ECONOMICAL Higher capacity makes emptying operation in longer periods which as a result decreases the collection costs. SECURITY Manual and Mechanical Emptying makes YERKON safe, easy and fast.
YERKON MENTALITY: LONG-LIFE Composite material used in YERKONs structure does not get affected by atmospheric conditions and keeps its own structure. All components in its structure is steamed up against vandalism. EASY TO EMPTY No special vehicle is needed for emptying, wastes are easily picked up even with open body trucks. Since existing garbage trucks are easily equipped with crane, they do not remain idle. RECYCLE While too many container is needed for Recycling, this is done with minimum YERKON container needed. Therefore, using less space. CLEAN AIR The time period between the two collections is much longer compared to the existing containers which leads to less travel of garbage trucks. The CO2 emission to the environment visibly decreasing and the air we breathe stays clean.
TECHNICAL DETAILS: MAIN BODY It’s produced of two main composite parts into one piece product by special combined technology. Total length is 2,4 meter. MAIN LID Since It’s made of high resistance composite material and special design, makes it more resistible. Its Filling lid is long lasting, easy to use and automatically closed HARD LIFTING CONTAINERS This is where wastes are stored in YERKON containers. Solid wastes are preferred since they involve more water content. Conveyance container consists of three parts; waste tank, leakage water tank and lock mechanism. Waste tank is made of special composite material and its thickness is 6 mm. Leakage water tank, with its special double base system, while storing the water in the solid waste, slows down the organic dissolution.
MODELS 3,0 m3 Yerkon-Smile 5, 0 m3 Yerkon-Smile Outer diameter: 1350 mm Outer diameter: 1700 mmDimensions and Weight Body height: 2400 mm Body height: 2400 mm Weight: 200 kg Weight: 300 kgSize 3000 liter 5000 liter Composite CTP (Flame retardant polyester based gum)Material Metal parts hot dip galvanicProduct Thickness 6 mm - 10 mm 6 mm - 10 mmMain Lid Net openning: 500 mm Net openning: 600 mmCarriage Container Max waste capacity: 1000 kgSeparator Available AvailableLeachate Volume 250 liter 400 liter Manual ManualEmptyingh Type Mechanic Mechanic Domestic waste Packing wasteWaste Type Paper & Carton Medical waste
DIMENSIONS: Hard Lifting Container: The main cylinder is one piece molded composites. • Special double bottom system allows liquids separate to liquid bottom so there is possibility to take liquids away before emtying to truck ( normally liquids go to the truck with waste and thus truck body has to be tight). • Safe and easy to use remote trigger system allows opening of the container with light pull of the rope and from safe distance. • One hook lifting does emptying operation quick. Hard Lifting Container 3,0 m3 5,0 m3 Diameter 1200 mm 1500 mm Length 2300 mm 2300 mm Volume 2200 liter 3500 liter Leachate Volume 250 liter 400 liter Waste Capacity (SWL) 1000 kg 1000 kg
EMPTYING: EMPTYING of Yerkon happens using hydraulic lifting arm TRUCK can have closed body, compacting body (see picture) or even normal open body (then You need disposable liner to avoid littering when driving). QUICK YERKON system will let You lift lid and container same time. Emptying is quick, only 2-3 minutes. THE BOTTOM OPENING is the way to empty the hard lifting container. Special design rope lock is both safe, easy and light to use.