Prospekte remko smart-wp_2013_en
Upcoming SlideShare
Loading in...5
×
 

Prospekte remko smart-wp_2013_en

on

  • 346 views

 

Statistics

Views

Total Views
346
Views on SlideShare
346
Embed Views
0

Actions

Likes
0
Downloads
1
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

Prospekte remko smart-wp_2013_en Prospekte remko smart-wp_2013_en Document Transcript

  • REMKO Smart-WP The Heat Pump Generation of the Future nd telligent a In t hly efficien hig 1-2013 Cosy heat in the winter A pleasant climate in the summer Quality with systems
  • REMKO – THE CUSTOMER-ORIENTATED SYSTEM PROVIDER FOR THE WHOLE YEAR Quality with systems AIR CONDITIONING HEATING NEW ENERGIES Air conditioners Mobile air conditioners Comfort air conditioners Hot-air heating systems Mobile hot-air heating systems Stationary hot-air heating systems Heat pumps Inverter heat pumps Heat pump packages Chilled water systems Chillers Dehumidifiers Mobile dehumidifiers Pool dehumidifiers 2
  • Product overview Page Series 4-17 Heat pumps 4-11 Function WKF 12-13 The intelligent control Smart-Control 14-15 Technical data of Smart-WP WKF-compact 16-17 Technical data of Smart-WP WKF 18-35 Heat pump packages 18-29 Heat pump packages WKF 30-31 Solar collectors RSK 32-35 Heat pump solar packages WKF 36-37 Tank systems 38-41 Accessories TÜV-inspected heat pumps with EHPA quality seal of approval The Smart-WP intelligent heat pumps are listed by the European Heat Pump Association (EHPA – formerly D-A-CH) in its seal of approval list! REMKO's inverter heat pumps thus fulfil high international standards and guarantee performance numbers you can count on! 3
  • INDEPENDENT FROM OIL AND GAS Use energy from the air all year round 75%* 75%* of the heat comes from the air, free of charge free solar energy from the air 25%* Electrical drive energy Heating The advantages of a heat pump are clear In contrast to other heating systems, the acquisition costs for a heat pump in new or old buildings pays off relatively quickly. ■ Considerably lower consumption and operating costs ■ Hardly any maintenance costs ■ No costs for chimney and chimney sweep New dimensions in terms of independence The solar energy stored in the air is an inexhaustible source of emission-free power. Heat pumps draw the majority of the energy from the surrounding air. ■ No costs for a tank ■ No costs for a tank room ■ Simple installation * The ratio can vary depending on outdoor temperature and operating conditions. Precise data for the COP value can be found in the technical data. 4 This works even in winter with outside temperatures below zero. Only the drive energy has to be provided by electrical power.
  • MODERN INVERTER TECHNOLOGY Highly efficient and energy-saving The REMKO Smart-WP represents a decision for a state-of-the-art solution. Modern inverter technology makes this possible. This pioneering technology automatically adapts the condenser speed variably to the precise cooling or heating requirement. This exact and gentle regulation enables a particularly energy saving, efficient operation with a high seasonal performance factor in comparison to non-inverter systems. Temperature The REMKO inverter technology saves money. Conventional Inverter Minimal temperature fluctuations mean energy savings In summary: In the event of increased demand, the heat pump works more intensively, in the event of reduced demand the heat pump switches over to energy-saving mode. 1/3 The inverter requires only one-third of the time of conventional systems to start up Time This saves money. 5
  • FUNCTION REMKO Smart-WP Outdoor area Indoor area Functional diagram for heating Condensing Evaporation Condensation Decompression Heat pump outdoor unit Heat pump indoor unit Heat pump technology Function of outdoor unit The technology of the heat pump is similar to that of a refrigerator - only the principle is reversed. The heat extracted from the air is brought up to a higher temperature level in a refrigerant circuit and is then transferred to the indoor unit. 6 Function of indoor unit The indoor unit transfers the heat contained in the refrigerant to the floor heating elements or radiators installed in the building. In order to cool, the function of the heat pump is simply reversed. The outdoor unit extracts heat from the air. This heat is brought up to a higher temperature level in a refrigerant circuit and is then transferred to the heating water in the indoor unit. The condenser speed and fan speed adapt to the precise cooling or heating requirement.
  • VERSATILE Heat pumps in new buildings. Independent from oil and gas. Heat pumps for modernisation of existing buildings. Combination with existing heat generators. Heat pumps in industry. The factory floor is heated and cooled through concrete core activation. Heat pumps for the workshop office. The ideal space-saving solution. WKF series It couldn't be simpler. Everything is completely installed in a single enclosure. Highly efficient, regulated heating circuit pump, heat exchanger, various fittings, and the regulation Smart-Control. WKF-compact series With additional integrated 300-litre domestic water tank. All in one unit. 7
  • REMKO Smart-WP HEAT PUMPS THAT ADAPT TO THE SYSTEM Combination with floor heating, modern radiators, and wall-mounted heaters Heat pumps are able to achieve their highest level of efficiency when combined with floor heating. With conventional modern radiators, the operating costs are lower than for oil or gas heating appliances. This means that cosy heating is guaranteed even at lower outside temperatures. Effective domestic water preparation Outdoor sensor An integrated 300-litre domestic water tank with a large-dimension heat exchanger is built into the unit in the WKF-compact series. For the WKF series, external storage systems are available. Circulation Tanks are offered in various designs and capacities. With connection options for heat pump, solar plants, and domestic water preparation, the storage system is the interface and collection point. Hot water Chilled water Combination with storage systems. The interface and collection point for various energy systems Inverted rectifier Photovoltaic plant Solar station Outdoor Average temperatures in Germany unit Annual heating performance % 50 39% 40 REMKO 29% 30 18% 20 7% 10 0 1% 20 15 5% 10 5 0 -5 Outdoor temperature °C 8 1% -10 -15 Smart- WP ind oor un it
  • Combination with a REMKO RSK solar plant for economic domestic water preparation and heating support An ideal combination for a maximum of economic efficiency and environmental protection. Direct solar energy delivers a high percentage of hot water preparation in annual average. lar So nt pla Optimized use of photovoltaic current The REMKO Smart-WP can preferably be operated using self-generated photovoltaic current. Less expensive current must be obtained from the mains. This saves money and decreases the dependency on current increases. aic olt ov ot Ph nt pla Combination with heat generator in bivalent operation The heat pump can be combined with a heat generator in order to cover peak loads. This appliance, for example, can be a gas or oil condensing boiler that can be directly connected to the WKF indoor unit. Air-conditioning unit Pleasant climate in the summer Floor h eating In hot weather the heat pump can be used for cooling. In order to so, the function of the heat pump is simply reversed. You will find air-conditioning units in the range of accessories. The air-conditioning units work on the convection principle. The technical principle of the air-conditioning units is simple: Air flows past the interior heat exchanger and is either heated up or cooled. Ceiling cassettes REMKO KWD-S series Wall-mounted units REMKO WLT-S series Wall-mounted chests REMKO KWK series 9
  • REMKO Smart-WP WKF-compact SERIES The heat pump with integrated 300-litre domestic water tank for high hot-water comfort The compact class saves space and installation effort The REMKO Smart-WP is perfectly suited for new buildings in combination with floor heating. The WKF-compact does not require much space due to its compact construction. This saves space. The costs for installation are reduced by the high proportion of premounted components. Profit from these advantages ■ Heating and cooling ■ Low investment costs ■ Power-modulated operation due to modern inverter mode ■ Low operating costs due to high COP value (see technical data) ■ Ready for connection of solar system to domestic water supply ■ Mounting-friendly installation. All connections are located at the top ■ High hot-water comfort through integrated, enamelled domestic water tank with a volume of 300 litres (BEVB 1.46 kWh/ day) ■ Intelligent Smart-Control control system. Use in intelligent Smart Grid power mains possible ■ Integrated heating circuit pump for the supply of the heating system ■ Integrated electronic bypass valve for guaranteeing the minimum medium flow rate ■ Intelligent defrost logic circuit Housing solution with EPP Through the consistent use of EPP moulded parts, insulation is increased and the loss of energy is minimized. In addition, considerable weight advantages result. The front consists of a lacquered design front panel. 10
  • Cosy heat in the winter, a pleasant climate in the summer Winters are getting warmer and summers hotter. Temperatures of over +30°C are no longer uncommon in summer. This means that in addition to heating, cooling is taking on an ever more important role. One more reason to install a REMKO heat pump. In winter, the heat pump operates as an efficient heating system, whilst, in summer, the water-bearing system ensures for comfortable air conditioning. Free choice when installing the outdoor units You save a lot of space when installing the outdoor units externally. You can use the basement space for other purposes such as a party room or sauna. Outdoor installation is ideal for buildings without a basement. WKF outdoor modules WKF-compact series with integrated 300-litre domestic water tank Output between 1.1 and 17.7 kW 11
  • REMKO Smart-Control The intelligent control system combines comfort and energy efficiency The multi-talented device assumes the complete energy management The Smart-Control system is an efficient overall system. Connection to all regenerative energies is possible. Whether heat pumps, solar energy, or photo-voltaics, anything can be integrated. Use in the Smart-Grid intelligent power mains is also possible. Flexible operation The colour display shows the respective operating status. This lets the user recognise the individual operating situations more easily. The multi-talented Smart-Control can be positioned anywhere in the building, even as a remote control. The Smart-Control software with plain-text menu and CheckServ wizard supports the service personnel during commissioning and maintenance. The multi-talented Smart-Control with its endless advantages Solar connection 12 Integration of photovoltaic current into the system Integration of air-conditioning function into the system Connection to several heat generators
  • The multi-talented Smart-Control is designed for use in the intelligent Smart-Grid power mains. Easy-to-survey, intuitive menu guidance ■ Basic screen for the fast check of all frequently used functions ■ Energy balance sheet, diagrams, and animations via the colour display ■ Constant function monitoring of all relevant parameters ■ Remote intervention via interface possible ■ The volume flow rate automatically adapts to the heating requirement and optimises efficiency Innovative operating concept Easy operation via softkeys and rotary knob Operating status via a central information button Software with plain-text menu and installation wizard External data memory 13
  • REMKO Smart-WP WKF-compact series EHPA / D-A-CH European uality Label for Heat Pumps The compact class saves space and installation effort WKF-compact series does not require much space due to its compact construction and integrated components. In connection with floor heating, this unit is perfectly suited for new buildings. This construction saves space in the mounting area. The costs for installation are reduced by the high proportion of premounted components. Profit from these advantages ■ Low investment costs ■ Power-modulated operation due to modern inverter mode ■ Low operating costs due to high COP value (see technical data) Scope of delivery ■ REMKO Smart-Control – the intelligent control system ■ Indoor unit with highly-efficient, enamelled, 300-litre domestic water tank ■ Outdoor unit with inverter technology ■ Highly efficient controlled heating circuit pump ■ Industrial water set, including 3-way changeover valve 14 ■ Dirt filter 1" ■ 2 shut-off valves 1" and thermometer ■ Safety group with SIV, automatic bleeding valve and pressure gauge ■ Outdoor sensor/immersion probe ■ Electrically controlled bypass mixer ■ Prepared for solar domestic water heating ■ Ready for connection of solar system to domestic water supply ■ Mounting-friendly installation. All connections are located at the top. ■ Heating and cooling ■ High hot-water comfort through integrated, enamelled domestic water tank with a volume of 300 litres ■ Extremely low radiation losses of the domestic water tank BEVB 1.46 kWh/day ■ Intelligent regulation SmartControl. Use in intelligent Smart Grid power mains is possible ■ Integrated heating circuit pump for the supply of the heating system ■ Integrated electronic bypass valve for guaranteeing the minimum medium flow rate ■ Intelligent defrost logic circuit ■ Monoenergetic operation possible through REMKO Smart-Serv or bivalent operation possible through REMKO Smart-BVT
  • Technical data Area of use: heating Series Design Operating mode Testing Inverter technology System Domestic water preparation Integrated domestic water tank Heating capacity min / max Heating capacity / COP for A7/W35 Heating capacity / COP for A2/W35 Heating capacity / COP for A-7/W35 Cooling capacity min / max Cooling capacity / EER for A35/W7 Cooling capacity / EER for A35/W18 Cooling capacity / EER for A27/W18 External pressure loss max. (heating system) Heat exchanger area, domestic water tank Service limits, heating Service limits, cooling Supply-temperature, heating water Refrigerant Refrigerant, basic capacity Refrigerant connections Max. refrigerant line length Max. refrigerant line height Voltage supply Rated power consumption for A7/W35 Rated current consumption for A7/W35 Customer's fuse protection (outdoor module) Nominal flow rate of water at ∆t 5 K Max. operating pressure, water Hydraulic connection, supply/return line Sound power level LwA (outdoor module) Sound-pressure level, LpA 1m (outdoor module) open air Outdoor module, standard colour Dimensions indoor module Height / width / depth Dimensions outdoor module Height / width / depth Weight indoor module / outdoor module Series Ref.no. 4-7 kW 8-11 kW WKF 180 compact Single split Heating / cooling EHPA Series Air / water Series 300 l 3.1 - 17.7 14.02 / 4.5 9.32 / 3.5 8.20 / 2.9 5.5 - 14.0 12.20 / 2.6 12.77 / 3.8 18.20 / 4.1 80 3.5 -20 to +45 +15 to +45 + 55 R 410A 2.85 3/8 / 5/8 75 30 400/3~/50 3.18 4.6 3x16 2.4 3.0 1“ AG 68.3 54/43/36 3) Grey-white 1928/800/790 1430/940/330 240/100 WKF 180 compact 255030 255025 255010 WKF 120 compact Single split Heating / cooling EHPA Series Air / water Series 300 l 2.5 - 12.5 9.86 / 4.4 6.95 / 3.6 6.14 / 2.9 3.3 - 11.9 6.79 / 2.3 5.30 / 3.7 9.46 / 3.6 80 3.5 -20 to +45 +15 to +45 + 55 R 410A 2.0 3/8 / 5/8 50 30 230/1~/50 2.26 9.8 20 1.7 3.0 1“ AG 67.9 53/42/36 3) Grey-white 1928/800/790 1010/940/330 238/74 WKF 120 compact 255020 WKF 85 compact Single split Heating / cooling EHPA Series Air / water Series 300 l kW 1.1 - 9.3 kW / -1) 7.97 / 4.4 kW / - 1) 4.87 / 3.3 kW / -1) 4.31 / 2.8 kW 1.6 - 9.5 kW / - 2) 5.60 / 3.0 kW / - 2) 7.47 / 3.9 kW / -2) 6.90 / 4.4 kPa 80 m² 3.5 °C -20 to +45 °C +15 to +45 °C + 50 R 410A kg 1.9 Inch 3/8 / 5/8 m 50 m 30 V/Hz 230/1~/50 kW 1.85 A 7.0 A slow-acting 16 m³/h 1.38 bar 3.0 Inch 1“ AG dB(A) 64.0 dB(A) 50/38/32 3) Grey-white mm 1928/800/790 mm 800/880/310 kg 236/57 WKF 85 compact 12-18 kW 255035 Serial colour of outdoor module: silver Ref.no. 255015 1) COP = coefficient of performance (heating capacity coefficient) according to EN 14511, TÜV-tested EN 14511 3) Specification per outdoor module: distance1m/5m/10m 2) EER = Energy efficiency ratio (cooling capacity coefficient) according to Accessories Series WKF 85 compact WKF 120 compact WKF 180 compact REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259011 259012 259013 259021 259022 259023 REMKO Smart-BVT BVT pipe assembly, 3-way changeover valve for the integration of a second heat generator (max. 20 kW) without a circulation pump, bivalently alternating operation Note: No combination with REMKO Smart-Serv possible. Only in combination with buffer tank. REMKO Smart-Serv Intelligent provision, installed heating rod 9kW for monoenergetic operation incl. Emergency-heat operation Note: No combination with REMKO Smart-BVT possible. For additional accessories, see page 38 15
  • REMKO Smart-WP WKF series EHPA / D-A-CH European uality Label for Heat Pumps It couldn't be simpler. Everything complete in an indoor unit Everything is installed in a single housing: Highly efficient circulation pump, heat exchanger, various fittings, and the SmartControl system. In connection with existing storage systems, the WKF is perfect for new buildings and renovations. Profit from these advantages ■ Low investment costs ■ Smart-Inverter power-modulated mode This saves money Scope of delivery ■ REMKO Smart-Control – the intelligent control system ■ Indoor unit ■ Outdoor unit with inverter technology ■ Highly efficient, controlled heating circuit pump ■ Dirt filter 1" ■ 2 shut-off valves 1" and thermometer 16 ■ Safety group with SIV, automatic bleeding valve and pressure gauge ■ Outdoor sensor/immersion probe ■ Electrically controlled bypass mixer ■ Prepared for solar domestic water heating ■ Low operating costs due to high COP value (see technical data) ■ Heating and cooling ■ Mounting-friendly installation, all connections are located at the top. ■ Intelligent Smart-Control control system. Use in intelligent Smart Grid power mains possible ■ Monoenergetic operation possible through REMKO Smart-Serv or bivalent operation possible through REMKO Smart-BVT
  • Technical data Area of use: heating 4-7 kW 8-11 kW 12-18 kW 18-30 kW Series Design Operating mode Testing Inverter technology System Buffer tank for hydraulic decoupling of volumetric flows 3-way valve for external domestic water tank Heating capacity min / max Heating capacity / COP for A7/W35 Heating capacity / COP for A2/W35 Heating capacity / COP for A-7/W35 Cooling capacity min / max Cooling capacity / EER for A35/W7 Cooling capacity / EER for A35/W18 Cooling capacity / EER for A27/W18 External pressure loss max. (heating system) WKF 85 Single split Heating/cooling EHPA Series Air / water optional optional 1.1 - 9.3 7.97 / 4.4 4.87 / 3.3 4.31 / 2.8 1.6 - 9.5 5.60 / 3.0 7.47 / 3.9 6.90 / 4.4 80 WKF 120 Single split Heating/cooling EHPA Series Air / water optional optional 2.5 - 12.5 9.86 / 4.4 6.95 / 3.6 6.14 / 2.9 3.3 - 11.9 6.79 / 2.3 5.30 / 3.7 9.46 / 3.6 80 WKF 180 Single split Heating/cooling EHPA Series Air / water optional optional 3.1 - 17.7 14.02 / 4.5 9.32 / 3.5 8.20 / 2.9 5.5 - 14.0 12.20 / 2.6 12.77 / 3.8 18.20 / 4.1 80 WKF 180 DUO Duo Split Heating/cooling EHPA Series Air / water optional optional 6.2 - 35.4 28.04 / 4.5 18.64 / 3.5 16.40 / 2.9 11.0 - 28.0 24.40 / 2.6 25.54 / 3.8 36.40 / 4.1 80 -20 to +45 +15 to +45 + 55 R 410A 2.0 3/8 / 5/8 50 30 230/1~/50 2.22 10.44 20 1.7 3.0 1" AG 67.9 53/42/36 Grey-white 500/800/500 1010/940/330 43/74 WKF 120 -20 to +45 +15 to +45 + 55 R 410A 2.85 3/8 / 5/8 75 30 400/3~/50 3.09 5.02 3x16 2.4 3.0 1" AG 68.3 54/43/36 Grey-white 500/800/500 1430/940/330 45/100 WKF 180 255040 255050 255060 255045 255055 255065 -20 to +45 +15 to +45 + 55 R 410A 2x2.85 2 x 3/8 / 5/8 75 30 230/3~/50 2x3.09 2x5.02 6x16 2x2.4 3.0 1/4" AG 68.3 54/43/36 Grey-white 500/800/500 1430/940/330 80/2 x 100 WKF 180 DUO Available from Nov. 2013 255070 Available from Nov. 2013 255075 Service limits, heating Service limits, cooling Max. supply line temperature, heating water Refrigerant Refrigerant, basic capacity Refrigerant connections Max. refrigerant line length Max. refrigerant line height Voltage supply Rated power consumption for A7/W35 Rated current consumption for A7/W35 Customer's fuse protection (outdoor module) Nominal flow rate of water at ∆t 5 K Max. operating pressure, water Hydraulic connection, supply/return line Sound power level LwA (outdoor module) Sound pressure level LpA (outdoor module) in open air3) Outdoor module, standard colour Dimensions indoor module Height / width / depth Dimensions outdoor module Height / width / depth Weight indoor module / outdoor module Series Ref.no. kW kW / -1) kW / -1) kW / -1) kW kW / - 2) kW / - 2) kW / -2) kPa °C °C °C -20 to +45 +15 to +45 + 50 R 410A kg 1.9 Inch 3/8 / 5/8 m 50 m 30 V/Hz 230/1~/50 kW 1.82 A 8.58 A slow-acting 16 m³/h 1.38 bar 3.0 Inch 1" AG dB(A) 64.0 dB(A) 50/38/32 Grey-white mm 500/800/500 mm 800/880/310 kg 41/57 WKF 85 Serial colour of outdoor module: silver Ref.no. 1) COP = coefficient of performance (heating capacity coefficient) according to EN 14511, TÜV-tested 2) 3) EER = Energy efficiency ratio (cooling capacity coefficient) according to EN 14511 Specification per outdoor module: distance 1m/5m/10m Accessories Series WKF 85 WKF 120 WKF 180 WKF 180 DUO REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259010 259014 259015 259016 259017 259024 259025 259026 259027 REMKO Smart-BVT BVT pipe assembly, 3-way changeover valve for the integration of a second heat generator (max. 20 kW) without a circulation pump, bivalently alternating operation Note: No combination with REMKO Smart-Serv possible. Only in combination with buffer tank. REMKO Smart-Serv Intelligent provision, installed heating rod 9kW for monoenergetic operation, incl. Emergency-heat operation Note: No combination with REMKO Smart-BVT possible. For additional accessories, see page 38 17
  • HEAT PUMP PACKAGES Type: Stuttgart Heat pump package type Stuttgart for WKF 85-180 compact appliance series If the heat pump is intended to serve as a sole heat generator, this heat pump package is the ideal solution. In connection with underfloor heating, this unit is perfectly suited for new buildings. In addition to the heating function, a cooling function can be provided when necessary. In this package, the domestic water preparation takes place in an enamelled, 300-litre domestic water tank integrated into the indoor module. Due to the compact construction, the installation effort is extremely low. The highly efficiently controlled heating circuit pump in the indoor module can supply the heating circuits directly with water. Package comprising: Information about government subsidies can be found under: www.bafa.de www.kfw.de www.foerderdata.de Package comprising: ■ Indoor module with integrated 300-litre domestic water tank (BEVB 1.46 kWh/day) and outdoor module For scope of supply, see p.14 Condensate catch pan for outdoor module with oil separator 18 ■ Condensation catch pan, including oil separator for outdoor module
  • Hydraulic diagram for Stuttgart (example for monoenergetic operation) Cold water Circulation Hot water Cooling circuit Floor heating circuit Indoor module Outdoor module Heating Hot water Surface cooling / surface heating Cooling Technical data Heat pump package, Type Stuttgart Heating capacity min / max WKF 85 compact 1.1 - 9.3 WKF 120 compact 2.5 - 12.5 WKF 180 compact 3.1 - 17.7 1.6 - 9.5 80 WKF 85 compact 3.3 - 11.9 80 WKF 120 compact 5.5 - 14.0 80 WKF 180 compact 256010 256015 256020 Series WKF 85 compact WKF 120 compact WKF 180 compact REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259020 259020 259020 Cooling capacity min / max External pressure loss Series Ref.no. kW kW kPa Accessories REMKO Smart-Serv Intelligent provision for malfunctions, installed heating rod 9kW for monoenergetic operation For additional accessories, see pageon page 38 19
  • HEAT PUMP PACKAGES Type: Mannheim Heat pump package type Mannheim for WKF 85-180 compact appliance series This heat pump package is designed for users who would like to operate the heat pump in combination with a conventional heat generator (bivalently alternating). The additional KPS 300 storage is used for the hydraulic decoupling of large medium flow rates. A cooling function for the summer can also be activated, if necessary. In this package, the domestic water preparation takes place in the 300-litre domestic water tank integrated into the indoor module. Through the compact design, installation expenses are extremely low. The separate pump assemblies (can be ordered separately) for the HGU/HGM heating circuits are equipped with a high-efficiency pump (0-10 V) regulated in a needs-based manner. Information about government subsidies can be found under: www.bafa.de www.kfw.de www.foerderdata.de Package comprising: ■ Indoor module with integrated 300-litre domestic water tank (BEVB 1.46 kWh/day) and outdoor module For scope of supply, see p.14 Package comprising: ■ Condensation catch pan, including oil separator for outdoor module ■ Buffer tank for cooling and heating water KPS 300 (300 litres) Condensate catch pan for outdoor module with oil separator 20 Buffer tank for cooling and heating water KPS 300 (300 l)
  • Hydraulic diagram for Mannheim (example for monoenergetic operation) Second heat generator max. 20 kW Cold water Circulation Hot water Cooling circuit Heating circuit Floor heating circuit Indoor module Outdoor module Hot water Heating Cooling Technical data Heat pump package, Type Mannheim Heating capacity min / max Surface cooling / surface heating WKF 85 compact 1.1 - 9.3 WKF 120 compact 2.5 - 12.5 WKF 180 compact 3.1 - 17.7 1.6 - 9.5 80 WKF 85 compact 3.3 - 11.9 80 WKF 120 compact 5.5 - 14.0 80 WKF 180 compact 256025 256030 256035 Series WKF 85 compact WKF 120 compact WKF 180 compact REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259011 259012 259013 259025 259025 259025 259026 259026 Bivalent 259026 Cooling capacity min / max External pressure loss Series Ref.no. kW kW kPa Accessories REMKO Smart-BVT BVT pipe assembly, 3-way changeover valve for the integration of a second heat generator (max. 20 kW) without a circulation pump, bivalently alternating operation Note: No combination with REMKO Smart-Serv possible. Only in combination with buffer tank. Heating circuit pump set HGU Speed-controlled heating circuit pump group (0-10 V)/unmixed Heating circuit pump set HGM Speed-controlled heating circuit pump group (0-10 V)/mixed For additional accessories, see page 38 21
  • HEAT PUMP PACKAGES Type: Cologne Heat pump package type Cologne for WKF 85-180 appliance series This heat pump package is designed for users who want heating first and foremost. The additional KPS 300 buffer tank is used for the hydraulic decoupling of large medium flow rates. A cooling function for the summer can also be activated, if necessary. Ddomestic water preparation takes place separately. With this heat pump package, both monoenergetic and bivalently alternating systems can be accommodated. A second heat generator (oil/gas boiler without pump) can be connected directly to the indoor module. The separate pump assemblies HGU/HGM (can be ordered separately) for the heating circuits are equipped with a high-efficiency pump (0-10 V) regulated in a needs-based manner. Information about government subsidies can be found under: www.bafa.de www.kfw.de www.foerderdata.de Package comprising: ■ Indoor module and outdoor module For scope of supply, see p.16 Package comprising: ■ Condensation catch pan, including oil separator for outdoor module ■ Buffer tank for cooling and heating water KPS 300 (300 litres) Condensate catch pan for outdoor module with oil separator 22 Buffer tank for cooling and heating water KPS 300 (300 l)
  • Hydraulic diagram for Cologne (example for monoenergetic operation) Second heat generator max. 20 kW Cooling circuit Heating element heating circuit Floor heating circuit Indoor module Buffer tank Outdoor module Heating Cooling Technical data Heat pump package, Type Cologne Heating capacity min. / max Cooling capacity min / max External pressure loss Series Surface cooling / surface heating WKF 85 1.1 - 9.3 1.6 - 9.5 80 WKF 85 WKF 120 2.5 - 12.5 3.3 - 11.9 80 WKF 120 WKF 180 3.1 - 17.7 5.5 - 14.0 80 WKF 180 256040 256045 256050 Series WKF 85 WKF 120 WKF 180 REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259014 259015 259016 259024 259025 259026 Heating circuit pump set HGU Speed-controlled heating circuit pump group (0-10 V)/unmixed 259025 259025 259025 Heating circuit pump set HGM Speed-controlled heating circuit pump group (0-10 V)/mixed 259026 259026 Bivalent 259026 Ref.no. kW kW kPa Accessories REMKO Smart-BVT BVT pipe assembly, 3-way changeover valve for the integration of a second heat generator (max. 20 kW) without a circulation pump, bivalently alternating operation Note: No combination with REMKO Smart-Serv possible. Only in combination with buffer tank. REMKO Smart-Serv Intelligent provision for malfunctions, installed heating rod 9kW for monoenergetic operation Note: No combination with REMKO Smart-BVT possible. For additional accessories, see page 38 23
  • HEAT PUMP PACKAGES Type: Dortmund Heat pump package type Dortmund for WKF 85-180 appliance series This heat pump package is for users who, in addition to the heating function, also want domestic water preparation from their heat pump system. A cooling function for the summer can also be activated, if necessary. In this package, the domestic water preparation takes place in an enamelled 300-litre domestic water tank. The high-efficiency pump in the indoor module can supply the heating circuits directly with water. Information about government subsidies can be found under: www.bafa.de www.kfw.de www.foerderdata.de Package comprising: Package comprising: ■ Indoor module and outdoor module For scope of supply, see p.16 ■ Buffer tank for domestic water, enamelled EWS 300 (300 litres) 3-way changeover valve, 5/4" ■ 3-way changeover valve ■ Condensate catch pan, including oil separator for outdoor module Condensate catch pan for outdoor module with oil separator 24 Tank for domestic water heating, enamelled EWS 300 (300 litres) ■ Smart-Control control system installed at the factory
  • Hydraulic diagram for Dortmund (example for monoenergetic operation) Indoor module Hot water Cooling circuit Floor heating circuit Domestic water tank Cold water Outdoor module Heating Surface cooling / surface heating Hot water Cooling Technical data Heat pump package, Type Dortmund Heating capacity min / max Cooling capacity min / max External pressure loss Series WKF 85 1.1 - 9.3 1.6 - 9.5 80 WKF 85 WKF 120 2.5 - 12.5 3.3 - 11.9 80 WKF 120 WKF 180 3.1 - 17.7 5.5 - 14.0 80 WKF 180 256055 256060 256065 Series WKF 85 WKF 120 WKF 180 REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259024 259025 259026 Ref.no. kW kW kPa Accessories REMKO Smart-Serv Intelligent provision for malfunctions, installed heating rod 9kW for monoenergetic operation For additional accessories, see page 38 25
  • HEAT PUMP PACKAGES Type: Düsseldorf Heat pump package type Düsseldorf for WKF 85-180 appliance series This heat pump package is the ideal solution for users who, in addition to the heating function, also want domestic water preparation from their heat pump system. A cooling function for the summer can also be activated, if necessary. The domestic water preparation takes place very efficiently with a 500 litre buffer tank and electronically regulated fresh water station using the hygienic flow method. The high-efficiency pump in the indoor module can supply the heating circuits directly with water. Information about government subsidies can be found under: www.bafa.de / www.kfw.de / www.foerderdata.de Package comprising: Package comprising: ■ Indoor module and outdoor module For scope of supply, see p.16 ■ Buffer tank for domestic water HPS 500 (500 litres) 3-way changeover valve, 5/4" ■ Electrically regulated fresh water station EFS 25 (for connection sets, see p.39) For connection sets, see p.39 Condensate catch pan for outdoor module with oil separator 26 Buffer tank for domestic water HPS 500 (500 litres) Fresh water station, complete with pump and flow switch ■ 3-way changeover valve ■ Condensate catch pan, including oil separator for outdoor module
  • Hydraulic diagram for Düssedorf (example for monoenergetic operation) Indoor module Cold water Hot water Cooling circuit Floor heating circuit Buffer tank Outdoor module Heating Surface cooling / surface heating Hot water Cooling Technical data Heat pump package, Type Düsseldorf Heating capacity min. / max Cooling capacity min / max External pressure loss Series WKF 85 1.1 - 9.3 1.6 - 9.5 80 WKF 85 WKF 120 2.5 - 12.5 3.3 - 11.9 80 WKF 120 WKF 180 3.1 - 17.7 5.5 - 14.0 80 WKF 180 256070 256075 256080 Series WKF 85 WKF 120 WKF 180 REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259024 259025 259026 Ref.no. kW kW kPa Accessories REMKO Smart-Serv Intelligent provision for malfunctions, installed heating rod 9kW for monoenergetic operation For additional accessories, see page 38 27
  • HEAT PUMP PACKAGES Type: Frankfurt Heat pump package type Frankfurt for WKF 85-180 appliance series The energy-saving package is prepared for the integration of solar thermal plants or combustible solid fuel burner. With the fin-tube heat exchanger (special accessory) RWT31, collector surfaces from approx. 8 to 15 m² can be connected. The domestic water preparation takes place with a 800 litre or 1000 litre buffer tank and electronically regulated fresh water station using the hygienic flow method. With this heat pump package, both bivalent and single energy source systems can be accommodated. The separate pump assemblies HGM (can be ordered separately) for the heating circuits are equipped with a high-efficiency pump (0-10 V) regulated in a needs-based manner. Package comprising: Package comprising: ■ Indoor module and outdoor module For scope of supply, see p.16 2 x 3-way changeover valve, 5/4" ■ Multifunctional buffer tank MPS 800 (800 litres) or MPS 1000 (1000 litres) ■ Electrically regulated fresh water station EFS 25 (for connection sets, see p.39) Immersion probe and solar sensor ■ 2 x 3-way changeover valve For connection sets, see p.39 Condensate catch pan for outdoor module with oil separator 28 Multifunction buffer tank MPS 800 (800 litres) or MPS 1000 (1000 litres) Fresh water station, complete with pump and flow switch ■ Immersion probe and collector sensor ■ Condensate catch pan, including oil separator for outdoor module
  • Hydraulic diagram for Frankfurt (example for monoenergetic operation for on-site integration into a solar plant) Indoor module Second heat generator max. 20 kW Cold water Hot water Floor heating circuit (optional) Outdoor module Solar connection Hot water Heating or surface heating Technical data Heat pump package, Type Frankfurt Heating capacity min. / max Cooling capacity min / max External pressure loss Series with MPS 800 Ref.no. with MPS 1000 Ref.no. WKF 85 1.1 - 9.3 1.6 - 9.5 80 WKF 85 WKF 120 2.5 - 12.5 3.3 - 11.9 80 WKF 120 WKF 180 3.1 - 17.7 5.5 - 14.0 80 WKF 180 256085 256090 256095 256086 256091 256096 Series WKF 85 WKF 120 WKF 180 REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259014 259015 259016 259024 259025 259026 259026 259026 Bivalent 259026 kW kW kPa Accessories REMKO Smart-BVT BVT pipe assembly, 3-way changeover valve for the integration of a second heat generator (max. 20 kW) without a circulation pump, bivalently alternating operation Note: No combination with REMKO Smart-Serv possible. Only in combination with buffer tank. REMKO Smart-Serv Intelligent provision for malfunctions, installed heating rod 9kW for monoenergetic operation Note: No combination with REMKO Smart-BVT possible. Heating circuit pump set HGM Speed-controlled heating circuit pump group (0-10 V)/mixed For additional accessories, see page 38 29
  • HEAT PUMP SOLAR PACKAGES Solar collector RSK 25 Solar collector RSK 25 With the thermal high-performance solar collectors Type RSK 25, you can operate your heating system with even greater efficiency in combination with the inverter heat pump from REMKO. With the refined workmanship and specially developed heat conducting technology, a maximum amount of solar energy is utilised. The RSK 25-5 solar set with two solar collectors utilises solar energy for hot-water preparation. The RSK 25-10 solar set with four solar collectors utilises solar energy for hot-water preparation and heating support. The REMKO solar sets provide unsurpassed performance in a perfectly attuned system configuration with the well-known inverter heat pump. Cross-section of solar collector RSK 25 Depending on the solar set, the heat pump can be used for air conditioning during the summer, whereas the thermal solar system assumes the hot water preparation. The complete system is controlled via the REMKO Smart-Control intelligent control system. Almost every desire can be fulfilled by the REMKO heat pump solar packages. KEYMARK DIN-tested REMKO 011-7S1695 F Technical data Series Domestic water heating/heating support Rooftop installation Flat roof installation Awning/façade installation Installation type 1 1 Highly selective absorber layer 2 2 4mm glass 3 5 3 Absorber sheet, aluminium 4 4 Absorber tube 6 7 5 Mineral wool 6 Bronze-coloured, anodised aluminium frame 7 Assembly system 30 Piping Absorber coating Max. number of collectors in series Nominal heat capacity Efficiency Total collector surface area Absorber surface area Aperture surface area Heat carrier content Permissible operating pressure Max. corrugated pipe length Dimensions - height/width/depth Weight kW % m² m² m² l bar m mm kg RSK 25 Yes Yes Yes no vertical, side-by-side horizontal, stacked (upon request) meandering highly selective 4 1.9 79.7 2.53 2.35 2.35 1.7 10 25 2102/1202/80 44
  • Solar set RSK 25-5 Solar set RSK 25-10 The solar set consisting of two solar collectors type RSK 25 is an efficient supplement to hot-water preparation. The solar set consisting of four solar collectors type RSK 25 is an efficient supplement to hot-water preparation and heating support. Solar set consisting of: Solar set consisting of: ■ 2x collectors type REMKO RSK 25 (5.06 m²) ■ Straight collector connector ■ Solar station ■ MAG 18, expansion vessel ■ Wall mount for MAG ■ Premixed glycol, 10 l ■ Basic mounting set ■ Fin-tube heat exchanger RWT 18 ■ Immersion probe and collector sensor ■ 4x collectors type REMKO RSK 25 (10.12 m²) ■ Straight collector connector ■ Solar station ■ MAG 25, expansion vessel ■ Wall mount for MAG ■ Basic mounting set ■ Expanded mounting set ■ Fin-tube heat exchanger RWT 31 ■ Immersion probe and collector sensor ■ Connecting hose for MAG ■ Connecting hose for MAG ■ Premixed glycol, 20 l (additional accessories can be found on page 31) Accessories included in the solar set: Solar station Diaphragm expansion vessel Glycol, premixed Basic mounting set Fin-tube heat exchanger Immersion probe and collector sensor 31
  • HEAT PUMP SOLAR PACKAGES Type Frankfurt Solar Heat pump package type Frankfurt Solar for WKF 85-180 appliance series The energy-savings package is prepared for the integration of the solar-thermal plant REMKO RSK 25-10 to the fin-tube heat exchanger RWT 31. The domestic water preparation takes place with a 800 litre or 1000 litre multifunction buffer tank and fresh water station using the hygienic flow method. With this heat pump package, both bivalent and single energy source systems can be accommodated. The solar set included in this package, type RSK 25-10, with a col- lector surface of 10.12 m² provides household water and heating support. The separate pump assemblies HGM (can be ordered separately) for the heating circuits are equipped with a high-efficiency pump (0-10 V) regulated in a needs-based manner. Information about government subsidies can be found under: www.bafa.de / www.kfw.de www.foerderdata.de Package comprising: Package comprising: ■ Indoor module and outdoor module For scope of supply, see p.16 ■ Solar set RSK 25-10 Solar set RSK 25-10 ■ Multifunctional buffer tank MPS 800 (800 litres) or MPS 1000 (1000 litres) 2 x 3-way changeover valve, 5/4" ■ Electrically regulated fresh water station EFS 25 (for connection sets, see p.39) ■ 2 x 3-way changeover valve For connection sets, see p.39 Condensate catch pan for outdoor module with oil separator 32 Multifunction buffer tank MPS 800 (800 litres) or MPS 1000 (1000 litres) Fresh water station, complete with pump and flow switch ■ Condensate catch pan, including oil separator for outdoor module
  • Hydraulic diagram for Frankfurt Solar (example for monoenergetic operation with integration of the REMKO solar set RSK 25-10) Indoor module Second heat generator max. 20 kW Cold water Hot water Floor heating circuit (optional) Outdoor module Heating or surface heating Solar connection Hot water Bivalent Technical data Heat pump package, Type Frankfurt Solar Heating capacity min. / max Cooling capacity min / max External pressure loss Series with MPS 800 Ref.no. with MPS 1000 Ref.no. WKF 85 1.1 - 9.3 1.6 - 9.5 80 WKF 85 WKF 120 2.5 - 12.5 3.3 - 11.9 80 WKF 120 WKF 180 3.1 - 17.7 5.5 - 14.0 80 WKF 180 256210 256215 256220 256211 256216 256221 Series WKF 85 WKF 120 WKF 180 REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259014 259015 259016 259024 259025 259026 259026 259026 259026 kW kW kPa Accessories REMKO Smart-BVT BVT pipe assembly, 3-way changeover valve for the integration of a second heat generator (max. 20 kW) without a circulation pump, bivalently alternating operation Note: No combination with REMKO Smart-Serv possible. Only in combination with buffer tank. REMKO Smart-Serv Intelligent provision for malfunctions, installed heating rod 9kW for monoenergetic operation Note: No combination with REMKO BVT possible. Heating circuit pump set HGM Speed-controlled heating circuit pump group (0-10 V)/mixed For additional accessories, see page 38 33
  • HEAT PUMP SOLAR PACKAGES Type: Stuttgart Solar Heat pump package type Stuttgart Solar for WKF 85-180 appliance series If the heat pump is intended to serve as a sole heat generator, this heat pump package is the ideal solution. In addition to the heating function, a cooling function can be provided when necessary. In this package, the domestic water preparation takes place in an enamelled, 300-litre domestic water tank integrated into the indoor module. In addition, a cooling function can be provided as necessary while the thermal solar plant heats the domestic water. Through the compact design, installation expenses are extremely low. The solar set included in this package, type RSK 25-5, with a collector surface of 5.06 m², is ideal for effective domestic water preparation. Package comprising: Package comprising: Solar set RSK 25-5 ■ Solar set RSK 25-5 ■ Condensate catch pan, including oil separator for outdoor module Condensate catch pan for outdoor module with oil separator 34 ■ Indoor module with integrated 300-litre domestic water tank (BEVB 1.46 kWh/day) For scope of supply, see p.14 ■ Smart-Control control system installed at the factory
  • Hydraulic diagram for Stuttgart Solar (example for monoenergetic operation with integration of the REMKO solar set RSK 25-5) Cold water Circulation Hot water Cooling circuit Floor heating circuit Indoor module Outdoor module Heating Surface cooling / surface heating Cooling Hot water Solar connection Technical data Heat pump package, Type Stuttgart Solar Heating capacity min. / max WKF 85 compact 1.1 - 9.3 WKF 120 compact 2.5 - 12.5 WKF 180 compact 3.1 - 17.7 1.6 - 9.5 80 WKF 85 compact 3.3 - 11.9 80 WKF 120 compact 5.5 - 14.0 80 WKF 180 compact 256225 256230 256235 Series WKF 85 compact WKF 120 compact WKF 180 compact REMKO Smart-Count Factory-installed calorimeter 259010 259010 259010 259021 259022 259023 Cooling capacity min / max External pressure loss Series Ref.no. kW kW kPa Accessories REMKO Smart-Serv Intelligent provision for malfunctions, installed heating rod 9kW for monoenergetic operation For additional accessories, see page 38 35
  • TANK SYSTEMS Heating water buffer tank ■ Universally usable as parallel buffer (hydraulic switch) or series-connected buffer ■ With dummy flange cover D240 for retrofitting a fin-tube heat exchanger RWT 31 ■ Electrical immersion heating element, screw-in 6/4" ■ Max. operating temperature 95°C ■ Max. operating pressure 3 bar ■ External anti-rust coating ■ 9 connecting thread (11 for MPS800/MPS1000) 6/4" IG with inflow restrictors ■ 4 socket screw threads 1/2" for sensor/thermometer immersion sleeves ■ From quality steel S235 according to DIN EN 10 025/10 111 ■ High-efficiency, double-shell heat insulation, 100 mm, silver grey ■ Test pressure 4.5 bar Unit type HPS 500 MPS 800 Storage type Buffer tank Stratified storage MPS 1000 Height with insulation mm 1725 1785 2135 Diameter with insulation mm 850 990 990 Diameter without insulation mm 650 790 790 Tilt height without insulation mm 1670 1750 2090 Weight kg 113 157 176 270300 270380 270400 Ref.no. Hot / cold water storage tanks ■ Universally usable as parallel buffer (hydraulic switch) or serial buffer ■ With cleaning flange lid D180 for retrofitting ■ Fin-tube heat exchanger RWT 18, can be retrofitted ■ 4 connecting threads AG 5/4" ■ Powder-coated steel sheet outer casing in silver-grey ■ Outer casing reinforced by beading ■ High-quality PUR insulation 50 mm (CFC, HCFC and HFC-free), water vapour diffusion tight ■ Sensor conduct for variable sensor positioning ■ Electrical immersion heating element, screw-in 6/4" ■ Operating temperature: min. 0°C, max. 95°C ■ Max. operating pressure 3 bar ■ Steel sheet inner boiler S235 according to DIN EN 10 025/10 111 36 Unit type KPS 300 Height with insulation mm 1797 Diameter mm 600 Tilt height without insulation mm 1835 Weight kg 125 Ref.no. 270250
  • TION W INSULA NE UP TO 21% VINGS NERGY SA E Storage tank for domestic water heating ■ Enamelled with double-coiled smooth-tube heat exchanger and particularly large heat exchanger surface of 3.5 m² ■ Inner container with magnesium protection anodes according to DIN 4753 ■ PUR insulation 50 mm (CFC, HCFC and HFC-free) ■ Max. operating pressure 10 bar ■ Max. operating temperature 95°C ■ Connection possibilities for circulation 3/4" AG ■ Built-in flange heating (legionella protection) or fin-tube heat exchanger RWT 18 can be retrofitted ■ Cold water supply and hot water outlet 1" IG ■ With cleaning flange cover D180 Unit type Height Diameter Tilt height Weight mm mm mm kg Ref.no. EWS 300 1435 680 1595 170 270100 STORAGE TANK SYSTEM - ACCESSORIES Tank systems Fin-tube heat exchanger Electrical booster heating 6 kW for KPS/MPS/HPS storage tank Electrical auxiliary heater 6/4" for installation in a buffer tank. Including temperature regulator and safety temperature limiter. 2, 4 or 6 kW can be optionally connected. Ref.no. 260063 Built-in flange heating for EWS 300 Consisting of a high-quality tubular heating element fitted onto an insulated flange plate. A protective current discharge resistor, thermal sensor, and safety temperature limiter are included. Max. operating pressure 10 bar. Heating capacity 6 kW. Note: Not suited for buffer tanks of the HPS/ MPS/KPS series. Ref.no. 260160 For additional indirect heating, e.g. with a solar thermal system Unit type Suitable for buffer tanks RWT 18 RWT 31 Heat exchanger surface m² 1.40 HPS 500 MPS 800 MPS 1000 3.10 Installation length in mm 440 530 Connection G Inch 3/4 1 Volume l 1.50 2.50 Flange Ø 180 / 8-hole 240 / 12-hole Ref.no. Type EWS 300 KPS 300 260200 260210 37
  • THE FINELY-MATCHED ACCESSORY RANGE FOR INVERTER HEAT PUMPS Outdoor module Connecting line between outdoor and indoor module 3 5 for WKF 85-180, 8 8" Ø 180 Duo Floor bracket Ref.no. 260010 Ref.no. 260020 /m Electrical condensation drainage - heating Electrical condensate drainage heating, temperature-regulated for the safe discharge of defrost water with outside temperatures below the freezing point. Ref.no. 260045 Floor bracket with vibration damper for outdoor module, length 1 m WKF 85-180, WKF 180 Duo (2x) For model Type Ref.no. WKF85, WKF85 WKM560 260085 WKF120, WKT120 WKM560 260085 WKF180, WKT180 WKM560+ 260078 CMF180 Duo (2x) WKM560+ 260078 Sound insulation set 1613900 Condenswater drip tray including oil separator Condensate catch pan made of stainless steel for outdoor module, including temperaturecontrolled electronic condensate catch pan heating, leaf guard grating, and oil separator. Ref.no. 260125 Indoor module REMKO Smart-Control remote control With the cabled remote control, all functions of the heat pump and heating circuits can be set. A room temperature controlled regulation of the heating circuits (FBH or radiators) can be realised. In addition, dew point control is integrated. Ref.no. 248105 38 Wall bracket set for the wall mounting of the outdoor module
  • Fresh water systems Return layering set RES for EFS 25 for connection to the buffer tank Tank connection set for buffer tanks RES including tank connection pipes and 3-way changeover valve for temperaturedependent layering in the buffer tank. For the direct connection of the fresh water station EFS 25 to the buffer tank. For buffer tank HPS 500 MPS 800 MPS 1000 For buffer tank HPS 500 MPS 800 MPS 1000 Ref.no. 259030 259031 259032 Ref.no. 259040 259041 259042 Pump with tube assembly Adjustable high-efficiency circulation pump including tube assembly for direct connection to the EFS 25. Pulse generator Pulse generator for the realisation of a pulse-controlled circulation pump via REMKO Smart-Control. Ref.no. 259052 Ref.no. 259045 Electronically regulated fresh water station EFS 25 For hygienic domestic water preparation in combination with buffer tanks. Complete with electronic control, speed-controlled high-efficiency pump, flow switch, and plate heat exchanger. Heat exchanger for high flow rate of 25 l/min., ready for mounting with EPP housing. Suited for mounting to the buffer tank or wall. Ref.no. 260155 EFS 25 39
  • THE FINELY-MATCHED ACCESSORY RANGE FOR INVERTER HEAT PUMPS Hydraulics 3-way changeover valve, 5/4" 3-way changeover valve, 6/4" Electrical changeover valve/3-way valve 5/4" for domestic water preparation and separate cooling circuit (four-tube system). Electrical changeover valve/3-way valve 6/4" for domestic water preparation and separate cooling circuit (four-tube system) for WKF 180 DUO Ref.no. 260072 Ref.no. 259055 Overflow protection valve Contact probe Overflow protection valve 1" for ensuring that the minimum medium flow rate is maintained. Contact probe for the integration of the following: - a temperature-controlled circulation pump via Smart-Control - a heating circuit with mixer (2 pcs. required) Ref.no. 260080 Ref.no. 259060 Heating circuit pump set HGM Consisting of a speed-controlled (0-10 V) heating circuit pump with mixer, ball valves with thermometer, 2x contact sensors Immersion probe Collector sensor Immersion probe for integrating the following: - solar reference sensor for buffer tank - domestic water tank EWS 300 - general buffer sensor Immersion probe for the integration of solar thermal plants Ref.no. 259036 Ref.no. 259062 Ref.no. 260102 Heating circuit pump set HGU Consisting of a speed-controlled (0-10 V) heating circuit pump without mixer, ball valves with thermometer Ref.no. 259035 40
  • RANGE OF ACCESSORIES FOR SOLAR COLLECTORS Solar 3-way changeover valve Solar, 1" Glycol Collector connector, straight Electrical changeover valve/3-way valve 1" for thermal solar plants (included in the heat pump solar package) Heat transfer medium with corrosion protection for solar plants (included in the REMKO solar set) For the connection of the solar collectors RSK 25 (included in the REMKO solar set) Ref.no. 260800 Ref.no. 260805 Ref.no. 260806 Ref.no. 260810 Installation coupling for the collector line Flat roof installation set for solar collectors For the connection of the corrugated solar pipe to the RSK 25 solar collectors (included in the corrugated pipe mounting set) RSK 25-5, consisting of: 3x flat roof brackets, 1x safety support Ref.no. 260842 Ref.no. 260865 RSK 25-10, consisting of: 5x flat roof brackets, 1x safety support Ref.no. 260843 10 L 20 L Corrugated pipe for solar collectors with Aerogel insulation for RSK 25-5 and RSK 25-10 Design Ref.no. 10 m roll, incl. installation set 260866 15 m roll, incl. installation set 260867 20 m roll, incl. installation set 260868 Corrugated pipe, m (max. 25 m) 260869 Installation set, loose 260870 Complete rooftop anchor set for solar collectors For solar package RSK 25-5 RSK 25-10 RSK 25-5 RSK 25-10 RSK 25-5 RSK 25-10 RSK 25-5 RSK 25-10 For tile type Frankfurter tile Frankfurter tile Crown tile Crown tile Slate Slate Rafter-independent Rafter-independent Ref.no. 260850 260855 260851 260856 260852 260857 260853 260858 Frankfurter tile Crown tile Slate tile 41
  • THE NEW ONLINE HYDRAULICS SYSTEM CONFIGURATOR The planning of REMKO heat pumps made easy The hydraulics configurator, a simple and free tool for generating an individual hydraulic diagram for heat pumps in only five steps, is available on www.REMKO.de. Test it... rator likkonfigu /hydrau .de ww.remko w 42
  • NOTES General terms and conditions of business and delivery All deliveries are subject to our general terms and conditions of business and delivery. We cannot recognise regulations of the customer that deviate from these conditions, even if we do not reject them outright. Price All of the s given in this list are subject to the statutory value added tax. The listed s are nonbinding guideline s. We reserve the right to make changes to our product range as well as the design, construction and s of our products. All previous lists are invalidated by this list. Copyright To be reproduced only with written permission. For orders under 50.00, there is an additional processing surcharge of 5.00. Please understand that we must calculate a processing surcharge of 5.00 for an order value under 50.00. Orders Packaging Telephone orders +49-5232606-0 We use environmentally friendly packaging. This package can be returned without a problem to all waste disposal companies connected to INTERSEROH. We can inform you of a waste disposal company near you. One of our employees will be pleased to take your order. After business hours, you can leave orders on our answering machine. Fax orders +49-5232-606-260 E-mail: info@remko.de URL: www.remko.de Disposal costs are not included in our s. These costs must be borne by the purchaser. Please do not forget your address and customer number. Payment Returns / exchange Exchanges and returns are not possible. Delivery The delivery takes place ex works or freight collect, including packaging. We reserve the right to make a partial delivery, insofar as it seems advantageous for fast settlement. Payment within 8 days of the invoicing date with 2% discount or net within 30 days. Payment for initial delivery (for new customers) is subject to a 3% discount upon delivery. Pickup Im Seelenkamp 12, 32791 Lage Monday through Thursday 8:00 am to 12:00 pm and 1:00 pm to 5:00 pm Friday 8:00 am to 3:30 pm 43
  • REMKO INTERNATIONAL REMKO GmbH & Co. KG Air Conditioning and Heating Technology Im Seelenkamp 12 · 32791 Lage PO Box 1827 · 32777 Lage Telephone +49-5232-606-0 Fax +49-5232-606-260 E-mail info@remko.de Internet www.remko.de Your REMKO dealer Hotline Within Germany 05232-606-0 International +49-5232-606-130 GS/RI/2/3.13 We reserve the right to technical modifications. Information provided without guarantee! ...and right in your own location too! Take advantage of our experience and advice