Razor Knife Safety Training

3,927
-1

Published on

2 Comments
0 Likes
Statistics
Notes
  • Good presentation. Here's some more free information on the subject - http://www.safetyawakenings.com/utility-knives-and-box-cutters/
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here
  • very practical thanks
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here
  • Be the first to like this

No Downloads
Views
Total Views
3,927
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
134
Comments
2
Likes
0
Embeds 0
No embeds

No notes for slide

Razor Knife Safety Training

  1. 1. <ul><ul><li></li></ul></ul>Razor Knife Safety
  2. 2. Always be sure that blades are properly seated in knives and that knives are properly closed and/or fastened together before use.
  3. 3. A dull blade requires more force and is more likely to slip than a sharp one. Change the blade whenever it starts to tear instead of cut. Always use sharp blades.
  4. 4. Always keep your free hand (and other body parts) away from the line of the cut. Always wear a cut resistant glove on your free hand while cutting with a razor knife.
  5. 5. Always pull— never push the knife. The blade could break off—wedging in the material and cutting your arm severely.
  6. 6. Don’t bend or apply side loads to blades by using them to open cans, loosen screws or pry loose objects Blades are brittle and can snap easily.
  7. 7. Never leave a blade open. Always retract the blade when not in use.
  8. 8. When making cut-outs on rolls always pull the knife down. Never push it away from you. When using a knife to cut through thick materials, be patient - make several passes, cutting a little deeper into the material with each pass.
  9. 9. Tips For Changing Blades <ul><li>Carefully remove the used blade from the knife. </li></ul><ul><li>Always hold the blade at the non-sharp side. </li></ul><ul><li>Discard the used blade in a safe place. Carefully wrap it in several layers of tape to cover sharp side and points. </li></ul><ul><li>Make sure to re-assemble the knife correctly. Make sure screw is tight. </li></ul>
  10. 10. Always Report Any Injury to Your Supervisor.

×