Panel Specifications

Panel Specifications Effective 11/21/08 Sewell Shutters, Inc. 11649 Chairman Dr. Suite 1 Dallas, TX 75243 (214)-342-0882 FAX (214)-341-7786 Panel Specifications: All panels are made to the exact measurements provided by the client. No allowances for hinges or frames are taken. Please contact Sewell Shutters, Inc. if you have any questions. Sewell Shutters manufactures panels using DROP RAILS. Specifications are as follows: 1 1/16” x 2” Beaded Stiles (square & rabbeted) — 3/4” Thick Rails — 1/2” X 5/8” Tilt Rod) Divider / Center Rails: 3 1/4” for panels employing 3 1/2” louvers; 4 1/4” for panels employing 2 1/2” or 4 1/2” louvers. See “PANEL HEIGHT SPECIFICATIONS” for divider/center rail restrictions. LOUVER CHOICES include 2 1/2”, 3 1/2” and 4 1/2” within the Natural Basswood Shutter Line and only 3 1/2” within the ThermoShutter Polymer Line PANEL WIDTH SPECIFICATIONS are as follows: Basswood & ThermoShutter Panel width shall not exceed 36” Shutter units that have an I.D. of greater than 36” will require multiple panels. Shutter units that require three or more panels can either be built using one or more T-Posts or using a bi-fold or tri-fold system. See illustrations below PANEL HEIGHT SPECIFICATIONS are as follows: Panel height shall not exceed 133” All Basswood panels will require a (free) divider/center rail at 109” All ThermoShutter panels will require a (free) divider/center rail at 72”

Panel Specifications

by djsewell on Mar 15, 2009

Accessibility

Categories

Upload Details

Usage Rights

1 Embed 1

Statistics

Panel Specifications — Document Transcript