1. WD PCB1692 Safe Mode Tips
http://www.dolphindatalab.com/wd-pcb1692-safe-mode-tips
We have handled many WD PCB1692 series 2.5" hard drives with some tips entering the safe mode.
For 2.5" PCB1692 or series after, it's not a problem to read ROM when the hard drives are
recognized. But it's a problem when we tried to write ROM and it's quite often to make the PCB
dead by writing ROM to it. The success rate is not high to enter safe mode by short connecting on
1692 series. The best way to enter safe mode for 1692 series is to separate the PCB, anyway, pls
don't remove the PCB. Users just need to remove the two screws on the PCB to control the heads
contact and insert one biz card and then power on and wait until the motor stops spinning and then
the hdd enters kernel mode and next the ROM can be read and written.This also helps to read
firmware modules for some hard drives with bad heads. After entering kernel mode by above
method, install the screws, force loading, hard reset, quit the program without powering the hdd off,
re-enter the hdd by normal mode and the SA is read and written normally. This method is very
effective for hdd with one single damaged head, power on the hdd and the hdd gets ready but cannot
do anything to the hdd.But if the hdd has slow response, this method doesn't work much. If users
are interested in our WD hdd firmware repair tool, users can email to us or order it directly from
our online shopping center.
Data Recovery Tools:





HDD Repair Tools http://www.dolphindatalab.com/product-category/hdd-repair-tools/
Data Recovery Hardware http://www.dolphindatalab.com/product-category/datarecovery-hardware/
DFL-STII Seagate HDD Firmware Repair
Tool http://www.dolphindatalab.com/product/seagate-hdd-firmware-repair-tool-dfl-stii/
DFL-DE Data Recovery Hardware http://www.dolphindatalab.com/product/dataextractor-dfl-de/
DFL-DDP Data Recovery Equipment
http://www.dolphindatalab.com/product/dfldata-dr-pro-usb-3-data-recovery-equipment/