The technique of wire sawing was invented in quarries to extract stone. And with the passage of time, it has proved to be the perfect choice to take of the thick and large sections of concrete, typically when the conventional concrete cutting methods don’t work.
1. Wire Sawing For Concrete Industry
The technique of wire sawing was invented in quarries to extract stone. And with the
passage of time, it has proved to be the perfect choice to take of the thick and large sections
of concrete, typically when the conventional concrete cutting methods don’t work.
What is a wire saw?
A wire saw typically comprises of a multi-strand cable affixed with diamond segments that
are threaded through an array of pulleys, which leads to a drive wheel that functions with a
hydraulic power unit. The perfect combination of the spinning wire and the force generated
by pulleys helps contractors cut through concrete and steel reinforcement.
The typical diameter of
cutting wire is 10mm (3/8
inch). Wire saw can be
effectively used for both
horizontal and vertical cutting
of stones, bricks and concrete
sections. Moreover, the length
of the wire can virtually go
any length, and thus there is
no restrain on cutting depth
with this innovative too.
However, the only limitation
with diamond saw cutting is
the lifting and extraction
specifications of the job.
Wire sawing needs to make use of waters, but it can be controlled with specific collection
techniques and special protection.
Application of Wire Sawing in the Concrete Industry
Wire sawing technique is ideal for extracting large sections of heavily reinforced concrete
such as bridge sections and columns, deep slabs, towers, foundations and piers. It makes
concrete cutting easier and faster when the work site area is small.
The process is also widely used for the recovery of specialist rock formations by the
archaeologists. The diamond-tipped cutting beads of wire saw execute the cut with high
accuracy and precision. When cutting paths in thick concrete walls, wire sawing technique
saves a considerable time.
2. Top Benefits of Wire Sawing
It doesn’t create that annoying noise while the cutting is in process
The technique is feasible for confined work space as well
Unlimited concrete structure sawing is feasible with diamond wire cutting equipment
It enables contractors for mass concrete extractions without causing damage or
breakage to the remaining part
It gives a smooth and sharp surface in the result
Besides concrete, wire saw can cut through embedded steel and heavy rebar too
It is faster in processing
It doesn’t generate vibrations while the cutting is in process
It is also suitable for cutting awkward shapes of concrete, bricks, stones or steel
So, if your construction project has too large concrete section to handle, just break it down
into small sections which can be easily dealt with for the rest part of the process. There are
many companies in London and across South East England that specialise in diamond
concrete cutting, concrete sawing and concrete drilling.
It is recommended to hire a company who has ample experience and expertise in diamond
concrete cutting. The professionals of the company should be certified and trained for
concrete sawing and cutting jobs. And make sure they are local to your area. You may take
help of the internet to locate such service provider in your region.