Manual d cajas

307
-1

Published on

Published in: Education
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
307
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Manual d cajas

  1. 1. International Fibreboard Casecode This code which is prepared in collaboration with ESBO (The European Solid Board Organisation), contains a methodical presentation of all existing box design styles, a code number being assigned to each design. As a reference document, the code is used world-wide and it has been adopted by the United Nations. Symbols used in drawings and computer systems. Computer Drawing symbol Description code Cuts, scores, slits etc. contours of erected cases or cutting CL lines of case blanks SC slotted cuts CI crease lines (inward bend) CO crease lines (outward bend) SI slit-score lines (inward bend) SO slit-score lines(outwardbend) DS double-score lines PL perforation lines SE soft edge cutting lines TP tear perforation Manufacturer's joint SJ Stitched joint TJ Taped joint GJ Glued joint Openings PC handholds stripped UC handholds non-stripped NC handholds non-stripped Flute direction FD Flute direction indicator 1/65
  2. 2. Case dimensions Unless otherwise specified all dimensions are expressed as internal dimensions in mm as follows: Length (L) x Breadth (B) x Height (H) Length (L) the longer dimension at the opening Breadth (B) = the shorter dimension at the opening Height (H) -the dimension from the top of the opening to the base The dimensions L B. H are specified in each description of the case construction, for some models the numerical value of B can exceed the numerical value of L. Dimensions should be measured under standard climate conditions, on the flat blank from the centre of crease bearing the thickness of the material in mind. For telescope type boxes the height (h) of the upper part (lid) should be given as a fourth measurement after an oblique stroke, i.e. 355 x 205 x 120/40 mm (L) (B) (H) (h) For cases with overlapping outer flaps the length of the area of overlapping (o) should be given as a fourth measurement after an oblique stroke. i.e. 355 x 205 x 120/ 40 mm (L) (B) (H) (o) Sheet dimensions Unless otherwise specified, the dimensions of a corrugated sheet are expressed in mm as follows: 1st dimension x 2nd dimension 1st dimension=along the glue lines 2nd dimension =across the glue lines Style versions Several case types may have derived versions without the necessity to create a new style. In this case a suffix should be added to the basic style number separated by a dash. Example 0201-2. Aversion maybe unique to individual manufacturers. Combination of types The construction styles shown are of the basic types of fibreboard cases. If the ultimate construction is a combination of two or three basic models. e.g. flap arrangements, they may also be described as follows: Top flaps as 0204, Bottom flaps as 0215 This type may also be described as 0204/0215 (Top flaps. Bottom flaps). 0204 0215 0204/0215 2/65
  3. 3. Styles and the manufacturers joint The drawing style layouts as shown in this Code may need to be re-arranged depending on the Manufacturers Joint chosen. Some styles may have a Manufacturers Joint which maybe glued, stitched or taped. A glued or stitched Joint may be an extension of either the short or the long panel. The sketches show how these would be indicated on a drawing: Example for all styles: This applies to all designs in this Code. Manual of Automated erection Each design style includes one of the following indications M - usually manual erection A - usually automated erection M/A - can be either manual or automated M+A - requires a combination of both These indications are based on current practice and are intented to give additional information to specifiers and users Some manually erected cases can be closed automatically (e.g : 0216 or 0712) 3/65
  4. 4. Closure of boxes Correct and effective closure of the packages is as important as the packaging construction itself. The following methods of closure are possible either singly or in combination: l by gluing, cold or hot l by taping l by interlocking l by stiching Closure by taping This can be done according to the example shown Closure by stiching This can be done according to the example shown General Remarks Please note that several case designs contained in the Code under a specific number could also be classified under other basic type groups. FULL CODE XXXX–XXXX STYLE STYLE VERSION XXXX –XXXX The standard The version number to differentiate the variation recognised from the standard design (corresponding to an shape/design from this individual drawing or CAD/CAM library). code 4/65
  5. 5. 5/65
  6. 6. Category : 01 Commercial rolls and sheets. Description : 0100 Description : 0110 Montage : Montage : 6/65
  7. 7. Category : 02 Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. Description : 0200 Montage : M/A Description : 0201 Montage : M/A Description : 0202 Montage : M/A 7/65
  8. 8. Category : 02 Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. Description : 0203 Montage : M/A Description : 0204 Montage : M/A Description : 0205 Montage : M/A 8/65
  9. 9. Category : 02 Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. Description : 0206 Montage : M/A Description : 0207 Montage : M Description : 0208 Montage : M 9/65
  10. 10. Category : 02 Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. Description : 0209 Montage : M/A Description : 0210 Montage : M Description : 0211 Montage : M 10/65
  11. 11. Category : 02 Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. Description : 0212 Montage : M/A Description : 0214 Montage : M Description : 0215 Montage : M 11/65
  12. 12. Category : 02 Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. Description : 0216 Montage : M Description : 0217 Montage : M Description : 0218 Montage : M 12/65
  13. 13. Category : 02 Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. Description : 0225 Montage : M Description : 0226 Montage : M Description : 0227 Montage : M 13/65
  14. 14. Category : 02 Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. Description : 0228 Montage : M/A Description : 0229 Montage : M Description : 0230 Montage : M/A 14/65
  15. 15. Category : 02 Slotted-type boxes consist of basically one piece with a glued, stitched or taped manufacturers joint and top and bottom flaps. They are shipped flat, ready to use and require closing using the flaps provided. Description : 0231 Montage : M/A 15/65
  16. 16. Category : 03 Telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box. Description : 0300 Montage : M/A Description : 0301 Montage : M/A Description : 0302 Montage : M 16/65
  17. 17. Category : 03 Telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box. Description : 0303 Montage : M Description : 0304 Montage : M Description : 0306 Montage : M/A 17/65
  18. 18. Category : 03 Telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box. Description : 0307 Montage : M Description : 0308 Montage : M Description : 0309 Montage : M 18/65
  19. 19. Category : 03 Telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box. Description : 0310 Montage : M + A Description : 0312 Montage : M/A Description : 0313 Montage : M/A 19/65
  20. 20. Category : 03 Telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box. Description : 0314 Montage : M Description : 0320 Montage : M/A Description : 0321 Montage : M 20/65
  21. 21. Category : 03 Telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box. Description : 0322 Montage : M Description : 0323 Montage : M Description : 0325 Montage : A 21/65
  22. 22. Category : 03 Telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box. Description : 0330 Montage : M/A Description : 0331 Montage : M/A Description : 0350 Montage : M 22/65
  23. 23. Category : 03 Telescope-type boxes consist of more than one piece and are characterised by a lid and/or bottom telescoping over the body of the box. Description : 0351 Montage : M/A Description : 0352 Montage : M/A 23/65
  24. 24. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0400 Montage : M Description : 0401 Montage : M Description : 0402 Montage : M 24/65
  25. 25. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0403 Montage : M Description : 0404 Montage : M Description : 0405 Montage : M 25/65
  26. 26. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0406 Montage : A Description : 0409 Montage : M Description : 0410 Montage : M/A 26/65
  27. 27. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0411 Montage : M/A Description : 0412 Montage : M Description : 0413 Montage : M/A 27/65
  28. 28. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0415 Montage : M/A Description : 0416 Montage : M Description : 0420 Montage : M/A 28/65
  29. 29. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0421 Montage : M/A Description : 0422 Montage : M/A Description : 0423 Montage : M/A 29/65
  30. 30. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0424 Montage : M/A Description : 0425 Montage : M/A Description : 0426 Montage : M 30/65
  31. 31. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0427 Montage : M Description : 0428 Montage : M Description : 0429 Montage : M 31/65
  32. 32. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0430 Montage : M/A Description : 0431 Montage : M Description : 0432 Montage : M 32/65
  33. 33. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0433 Montage : M Description : 0434 Montage : M Description : 0435 Montage : M/A 33/65
  34. 34. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0436 Montage : M Description : 0437 Montage : M Description : 0440 Montage : A 34/65
  35. 35. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0441 Montage : A Description : 0442 Montage : M Description : 0443 Montage : M 35/65
  36. 36. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0444 Montage : M Description : 0445 Montage : M Description : 0446 Montage : A 36/65
  37. 37. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0447 Montage : M Description : 0448 Montage : M Description : 0449 Montage : M 37/65
  38. 38. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0450 Montage : M Description : 0451 Montage : M Description : 0452 Montage : A 38/65
  39. 39. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0453 Montage : A Description : 0454 Montage : M Description : 0455 Montage : M 39/65
  40. 40. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0456 Montage : M Description : 0457 Montage : M Description : 0458 Montage : M 40/65
  41. 41. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0459 Montage : A Description : 0460 Montage : A Description : 0470 Montage : M 41/65
  42. 42. Category : 04 Folder-type boxes and trays usually consist of only one piece of board. The bottom of the box is hinged to form two or all side walls and the cover. Locking tabs, handles, display panels etc., can be incorporated in some designs. Description : 0471 Montage : M Description : 0472 Montage : M Description : 0473 Montage : M 42/65
  43. 43. Category : 05 Slide-type boxes consist of several pieces of liners and sleeves sliding in different directions into each other. This group also includes outside sleeves for other cases. Description : 0501 Montage : M Description : 0502 Montage : M Description : 0503 Montage : M 43/65
  44. 44. Category : 05 Slide-type boxes consist of several pieces of liners and sleeves sliding in different directions into each other. This group also includes outside sleeves for other cases. Description : 0504 Description : 0505 Description : 0507 Montage : M Montage : M Montage : M Description : 0509 Description : 0510 Montage : M Montage : M Description : 0511 Montage : M 44/65
  45. 45. Category : 05 Slide-type boxes consist of several pieces of liners and sleeves sliding in different directions into each other. This group also includes outside sleeves for other cases. Description : 0512 Montage : M 45/65
  46. 46. Category : 06 Rigid-type boxes consist of two separate end pieces and a body and require stitching or a similar operation before they can be used. Description : 0601 Montage : A Description : 0602 Montage : A Description : 0605 Montage : A 46/65
  47. 47. Category : 06 Rigid-type boxes consist of two separate end pieces and a body and require stitching or a similar operation before they can be used. Description : 0606 Montage : A Description : 0607 Montage : A Description : 0608 Montage : A 47/65
  48. 48. Category : 06 Rigid-type boxes consist of two separate end pieces and a body and require stitching or a similar operation before they can be used. Description : 0610 Montage : M/A Description : 0615 Montage : M/A Description : 0616 Montage : M/A 48/65
  49. 49. Category : 06 Rigid-type boxes consist of two separate end pieces and a body and require stitching or a similar operation before they can be used. Description : 0620 Montage : A Description : 0621 Montage : M 49/65
  50. 50. Category : 07 dy-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up. Description : 0700 Montage : M Description : 0701 Montage : M Description : 0703 Montage : M 50/65
  51. 51. Category : 07 dy-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up. Description : 0711 Montage : M Description : 0712 Montage : M Description : 0713 Montage : M 51/65
  52. 52. Category : 07 dy-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up. Description : 0714 Montage : M Description : 0715 Montage : M Description : 0716 Montage : M 52/65
  53. 53. Category : 07 dy-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up. Description : 0717 Montage : M Description : 0718 Montage : M Description : 0747 Montage : M 53/65
  54. 54. Category : 07 dy-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up. Description : 0748 Montage : M Description : 0751 Montage : M Description : 0752 Montage : M/A 54/65
  55. 55. Category : 07 dy-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up. Description : 0759 Montage : M Description : 0761 Montage : M Description : 0770 Montage : M 55/65
  56. 56. Category : 07 dy-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up. Description : 0771 Montage : M Description : 0772 Montage : M Description : 0773 Montage : M 56/65
  57. 57. Category : 07 dy-glued cases consist of basically one piece, are shipped flat and ready to use by simple setting up. Description : 0774 Montage : M 57/65
  58. 58. Category : 09 Interior fitments such as inside liners, pads, partitions, dividers etc, whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required. Coding of interior fitments The following range of interior fitments is coded depending on the number of panels used, in any combination of shapes (for computer systems). Number of panels 2 3 4 5 6 7 8 09 10 Code 0982 0983 0984 0985 0986 0987 0988 0989 0990 Number 11 12 13 14 15 16 17 18 19 of panels Code 0991 0992 0993 0994 0995 0996 0997 0998 0999 Description : 0900 Description : 0901 Description : 0902 Montage : M Montage : M Montage : M Description : 0903 Description : 0904 Description : 0905 Montage : M Montage : M Montage : M Description : 0906 Montage : M 58/65
  59. 59. Category : 09 Interior fitments such as inside liners, pads, partitions, dividers etc, whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required. Coding of interior fitments The following range of interior fitments is coded depending on the number of panels used, in any combination of shapes (for computer systems). Number of panels 2 3 4 5 6 7 8 09 10 Code 0982 0983 0984 0985 0986 0987 0988 0989 0990 Number 11 12 13 14 15 16 17 18 19 of panels Code 0991 0992 0993 0994 0995 0996 0997 0998 0999 Description : 0907 Description : 0908 Description : 0909 Montage : M Montage : M Montage : M Description : 0910 Description : 0911 Description : 0913 Montage : M Montage : M Montage : M Description : 0914 Montage : M 59/65
  60. 60. Category : 09 Interior fitments such as inside liners, pads, partitions, dividers etc, whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required. Coding of interior fitments The following range of interior fitments is coded depending on the number of panels used, in any combination of shapes (for computer systems). Number of panels 2 3 4 5 6 7 8 09 10 Code 0982 0983 0984 0985 0986 0987 0988 0989 0990 Number 11 12 13 14 15 16 17 18 19 of panels Code 0991 0992 0993 0994 0995 0996 0997 0998 0999 Description : 0920 Description : 0921 Description : 0929 Montage : M Montage : M Montage : M Description : 0930 Description : 0931 Description : 0932 Montage : M Montage : M Montage : M Description : 0933 Montage : M 60/65
  61. 61. 61/65
  62. 62. Category : 09 Interior fitments such as inside liners, pads, partitions, dividers etc, whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required. Coding of interior fitments The following range of interior fitments is coded depending on the number of panels used, in any combination of shapes (for computer systems). Number of panels 2 3 4 5 6 7 8 09 10 Code 0982 0983 0984 0985 0986 0987 0988 0989 0990 Number 11 12 13 14 15 16 17 18 19 of panels Code 0991 0992 0993 0994 0995 0996 0997 0998 0999 Description : 0934 Description : 0935 Description : 0940 Montage : M Montage : M Montage : M Description : 0941 Description : 0942 Description : 0943 Montage : M Montage : M Montage : M Description : 0944 Montage : M 62/65
  63. 63. Category : 09 Interior fitments such as inside liners, pads, partitions, dividers etc, whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required. Coding of interior fitments The following range of interior fitments is coded depending on the number of panels used, in any combination of shapes (for computer systems). Number of panels 2 3 4 5 6 7 8 09 10 Code 0982 0983 0984 0985 0986 0987 0988 0989 0990 Number 11 12 13 14 15 16 17 18 19 of panels Code 0991 0992 0993 0994 0995 0996 0997 0998 0999 Description : 0945 Description : 0946 Description : 0947 Montage : M Montage : M Montage : M Description : 0948 Description : 0949 Description : 0950 Montage : M Montage : M Montage : M Description : 0951 Montage : M 63/65
  64. 64. Category : 09 Interior fitments such as inside liners, pads, partitions, dividers etc, whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required. Coding of interior fitments The following range of interior fitments is coded depending on the number of panels used, in any combination of shapes (for computer systems). Number of panels 2 3 4 5 6 7 8 09 10 Code 0982 0983 0984 0985 0986 0987 0988 0989 0990 Number 11 12 13 14 15 16 17 18 19 of panels Code 0991 0992 0993 0994 0995 0996 0997 0998 0999 Description : 0965 Description : 0966 Description : 0967 Montage : M Montage : M Montage : M Description : 0970 Description : 0971 Description : 0972 Montage : M Montage : M Montage : M Description : 0973 Montage : M 64/65
  65. 65. Category : 09 Interior fitments such as inside liners, pads, partitions, dividers etc, whether tied to Case Design or as singular items. Any shown number of panels is arbitrary and may be increased or decreased as required. Coding of interior fitments The following range of interior fitments is coded depending on the number of panels used, in any combination of shapes (for computer systems). Number of panels 2 3 4 5 6 7 8 09 10 Code 0982 0983 0984 0985 0986 0987 0988 0989 0990 Number 11 12 13 14 15 16 17 18 19 of panels Code 0991 0992 0993 0994 0995 0996 0997 0998 0999 Description : 0974 Description : 0975 Description : 0976 Montage : M Montage : M Montage : M The terms Box, Container and Case are interchangeable in the context of these descriptions. 65/65

×