Affordable Mushroom Kits


Published on

"Do HPS and MH lamps explode?"

It's endorsed by all MH lamp manufacturers that the lights be converted at the very least 15 minutes once each week to forestall "non-passive" (rupturing regardless of what the lamp) failure. Rtrty recommendation to adhere to. HPS lamps produced for differently and might operate 24/7 indefinitely and often are not predisposed to "non-passive" failures. Don't spray a wonderful lamp with water or cleaner. Always wait at least 30 minutes in favor of lamp to chill right before you clean it with standard window cleaner.

  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

Affordable Mushroom Kits

  1. 1. affordable mushroom kits Kit Includes: 600 Watt Digital Eco High Pressure Sodium & Metal Halide Grow Light With Reflector (Green Buddha Tech) Pro High Pressure Sodium Grow Metal Halide Hybrid Bulb (Green Buddha Tech) 2 Yo Yo Retractable Hangers Digital Tempature Gauge & Hygrometer PH Test Kit With PH Up and PH Down 25' Roll Of Reflective Mylar (To Look for the Most Of Your Light) Heavy Duty Timer 3 Months of Grow and Bloom Nutrients Complete Hydroponic Arrange Including: 4 Plant - 5 Gallon Grow Box 17" X 13" X 10" 12" Long Bubble Air Stone 10 Gallon Air Pump Rockwool cubes, Hydroton Pebbles Hydroponic Ebook and Grow Sources Cali Grow Kits 24/7 Grow Can easily Make that Experience Effortless LIGHTING BALLAST AND HOUSING: Dimensions: 9" long x 4" wide x 5.5" tall The grow light ballast is a whole new REMOTE 600 watt HPS ballast, with a very good design that separates the ballast core apart from capacitor and ignitor components to supply top performance and long life. This grow light ballast is created to our specifications with high output lighting results for horticulture / hydroponics / hydroponic cultivation use. The High Pressure Sodium grow light ballast also features a convenient retractable handle with large keyholes for wall or ceiling mounting options. The lighting ballast comes with over-sized rubber feet for electrical safety and quiet operation. The 8 foot power cord and 10 foot change output cords are constructed irregardless of highest-quality, heavy gauge industrial grade electrical cord usually seen on grow lights costing much more. The HPS ballast is pre-set and able to plug into standard 110/120 household voltage, but is completely changed to 220/240 volts. The High Pressure Sodium 600 watt grow light ballast will operate any standard or horticultural 600 watt High Pressure Sodium lamp or 600 watt Metal Halide Conversion lamp. For future upgrades, the universal socket set can be utilized with a great deal of other reflectors; including, air-cooled reflectors, umbrella style hoods, and a number of grow light reflector hoods. This makes the operating system a inexpensive in hydroponic and hydroponic growing lighting. FOUR-SIDED HORIZONTAL GROW LIGHT REFLECTOR: Dimensions: 15.5" long x 12.5" wide x 6" deep
  2. 2. This quality grow light system contains a lighting reflector hood that may be a highly efficient FOUR sided reflector. This top of the line HORIZONTAL REFLECTOR is made from the HIGHEST QUALITY MATERIALS available! Specifically designed growing plants indoors, this reflector incorporates a steel socket and reflector bracket, 5kv Pulse Rated Mogul Based socket, and highly reflective polished aluminum reflector. The highly polished aluminum reflector has a mirror-like finish rated at 95% reflectivity for MAXIMUM LIGHT OUTPUT. This grow light reflector hood is intended to last evermore and is de facto cleaned with common household window cleaner. The grow lights Horizontal lamp configuration design allows for the greatest light coverage over the top of your hydroponic gardening system area while providing the highest light intensity levels possible. It is well known that these BEST design for horticultural and hydroponic reflectors the bulging HORIZONTAL REFLECTOR design incorporated using this system reflector. Additionally, this versatile grow light reflector can be utilized to be the 4 sided reflector and sometimes a very adjustable BATWING reflector. This grow light reflector hood can have two stiff steel hangers to hold your reflector from, plus 10' cord farther away from reflector alongside the remote 600 watt High Pressure Sodium ballast housing 600 WATT LIGHT BULB: This standard bulb emits 55,000 lumens make rated whole life of 24,000 hours. Features: 55,000 lumens 24,000 hour rated life mogul base universal mounting position 2 Year Warranty on the Whole System! We can think of The specs with regards to a Kit? Lighting Basics Lighting for Plants And what are the "lighting spectrums"? Let us discuss the domains of my indoor garden lighting system? Lets firstly consider what is a ballast and one of the main reasons why I would like one? High Pressure Sodium and Metal Halide; what's what i am saying? Can I use a HPS lamp in just a MH system? And visa-versa? Can I exploit a 1000watt lamp aided by the 600 watt ballast? Ok so what exactly is a "CONVERSION" lamp and why bother I use a single? Lets firstly consider what is a "horticultural" lamp (AgroMax, Sunmaster) and but i'm sorry to say I want one. What wattage lighting system do I would like? Does my HPS or MH lamp need a great time to "warm-up"? Do I want special wiring for our particular indoor garden lighting? Do HPS and MH lamps explode?
  3. 3. The amount that electricity does my light use? How much cash is it possible it may cost to operate my indoor gardening system lighting system? 120 volt or 240 volt, am I saving electricity? Time do MH and HPS lamps last? When should I replace my lamps? What defines ordering from a wonderful? "Lighting Basics" Artificial Light is chief for indoor plant growth There are naturally 3 basic choices for artificial light: Incandescent lamps - These generally are the standard "grow bulbs" utilized by everyone for general household lighting. You need to know that these are very inefficient light sources take advantage of rather a lot of power to produce just a bit light. Fluorescent lamps -The fluorescent lamps is starting to grow in popularity for indoor plant development, especially "High-Output" T5 fluorescent lamps. Fluorescent lamps are 3-7 times more streamlined than incandescent lamps. HID lamps - Some of the more common are Metal Halide and High Pressure Sodium lighting sources, traditionally develop for lighting large areas such as factories, warehouses and storeroom, they are also the first choice for indoor plant growth. HID lamps are 4-8 times more cost effective than incandescent lamps. "Lighting for Plants" Light is seen by people as "visible energy" some of us use to look at and distinguish different colors. Plants use light as stimulants and fuel for growth. Light is an essential think about any indoor growing environment. Additionally it is the limiting think about any indoor growing environment. Lighting technology has vastly improved the number of competitors it were certain which of course is continually evolving with new technologies. Without good and plentiful light, a plant will not be able to have a show photosynthesis, chiefly the main principle by which a plant converts food into energy. Plants are able to utilize artificial light, as long as it's of the correct lighting spectrum for photosynthesis and now there is plenty of it. An indoor gardening setup own personal requirements lot of sunshine and an operable and effective source should be chosen to offer this light. Some forms of incandescent lamps might be an effective source for plant growth but they also are not very much efficient and many lamps and quite a bit of energy production (watts) can be needed. Most hydroponic gardening systems are lighted by HID lamps (Metal Halide or High Pressure Sodium), simply because these sources really are effective and efficient, producing much more illumination per watt of energy production used than incandescent lamps. Fluorescent lamps are often used on seed starting and early stages of photosynthesis and also supplement spectral needs of plants while i was using HPS lamps. Different HID and Fluorescent lamps produce different lighting spectrums and lumen outputs. "Just how much "lighting spectrums"?" Different types of lamps produce different lighting "spectrums". The visible lighting spectrum is
  4. 4. very like a rainbow, ranging in order from violet-blue-green-yellow-orange-red. This spectrum is scientifically measured in "degrees Kelvin" or "K". A lamp that's rated at 6500 Kelvin or 6500K would look like "blue-ish", for being lamp that is rated at 2,200K would seem like "orange-red-ish". Plants are so far the spell in spite of what the seasons, thus should be seasonal changes in available light spectrum. The blue end irregardless of spectrum is related to spring therefore it is lengthening days, promoting vegetative growth stressed plants. The red end regardless of what the spectrum is reminiscent of autumn, with its shortening days and long harvest sunset. Autumn usually promotes the next flower-to-leaf ratio in flowering plants. It is usually accepted that an interior grower should use normally Metal Halide (MH), or High Pressure Sodium (HPS) light. What we mean between them forms of lights is basically the "light spectrum" that produce. Plants respond many light spectrums in different ways. Additionally, in numerous stages irregardless of photosynthesis, a plant will respond better several spectrums. MH lamps will always be made for vegetative plants as well as plants in the vegetative phase of development while HPS lamps can be employed for flowering plants and also for plants within the flowering step growth. There are plenty of books and blog, many with lighting approaches specific plants. We provide all types of lighting systems and many types of "conversion" lamps which allow you so you can get standard HPS system and simply screw while using HPS conversion bulb while you plant enters the flowering platform growth. "Let's list the different parts of my hydroponic gardening setup lighting system?" Your lighting system could have 3 basic parts, the ballast, the reflector with lamp. "What is a ballast and have you noticed how I want one?" The ballast certainly the electrical consider a High Intensity Discharge (H.I.D.) or Fluorescent light that makes it work. The ballast is critical to function a H.I.D. or Fluorescent light. It converts the electricity from your home into the precise energy frequency wished for update the lamp. Each specific H.I.D. lamp type (High Pressure Sodium [HPS], Metal Halide [MH], etc.) and wattage type (150, 250, 400, 600, 1000, etc.) have a particular ballast for each type and wattage of H.I.D. lamp. They are not beneficial for one another, you can not use different lamp types or wattages with this light aside from the strategy specifically fabricated it. The only exception is joining a "Conversion" lamp which supplied with operate in a particular fixture. The ballast will can have an influence cord which plugs or way to enter wall outlet. The ballast needs to have an output receptacle or output cord which related with the socket to your lamp. Ok so what exactly is a reflector and how come I would like one? Reflectors (also referred to as: hoods, shades, fixtures, etc), serve the aim of directing the light output out of your lamp towards your garden. The reflector may function an enclosure for your lamp, if from the store with a glass lens, will restrain heat directed toward your garden. Additionally, should your reflector is running cooling flanges, the reflector may be "air- cooled" via a fan, and a lot of the heat offered your lighting system could also be frenzied from you garden via this air cooling method. A fundamental and constructed reflector will dramatically delay your indoor gardening setup yields as a poorly designed reflector will rob your indoor garden of the dear lumens it needs for maximum growth. ALWAYS, like Horizontal reflector, as "Vertical and Vertizontal" reflectors is really inefficient. ALWAYS like reflector with "spectral
  5. 5. pebbled aluminum inserts" as these dramatically improve efficiency your reflector. "High Pressure Sodium and Metal Halide; what is the biggest difference?" Although High Pressure Sodium and Metal Halide will definitely be varieties of HID (High Intensity Discharge) lights, they emit different color spectrums. Generally High Pressure Sodium (HPS) lamps emit light that is concentrated within the red to yellow side for all your serious spectrum and weak within the blue-violet end. Metal Halide (MH) lamps, against this, emit a more balanced light, but quite some time concentrated in the blue to yellow side regardless of what the spectrum and or are weak within the orange you just read end. Both sorts of lighting have their aspect any growing environment. Another difference the bulging lumens per watt of both bulbs. HPS lamps are often more pleasant light producers (more lumens per watt), these lamps produce a bit of 100-140 lumens per watt, while MH lamps produce a band of 70-110 lumens per watt. An easy way to inform difference between them types is simply by appearance. Generally HPS lamps appear very yellow-orange, MH lamps appear more blue-white. "Can I exploit a HPS lamp since we find ourselves amidst an MH system? And visa-versa?" Generally, NO! With very few exceptions and HPS lamp must placed upon only with HPS type ballasts and additionally a MH lamp should be utilized with an MH ballast. The one exceptions are specially "conversion" bulbs and a few "switchable" type ballasts. "Can I exploit a 1000watt lamp equipped with 600 watt ballast?" NO! You biggest the particular wattage lamp to match the ballast. Although other wattage lamps may "operate" on other wattage ballasts, a non-matching ballast will either quickly make lamp to fail or produce only a small percentage of the sunshine output the lamp was allowed to provide. "What exactly is a "CONVERSION" lamp and why should I play one?" A "conversion" lamp here's a completely unique and constructed lamp that allows operation have HPS lamp type develop a MH ballast type or those MH lamp type establish HPS ballast type. These lamps, while once unreliable and expensive, now have become very dependable in quality and performance and the worth is very reasonable. They serve the aim of improving yields for indoor growers who've only one sort of lighting systems for his or her garden. For example, suppose an indoor gardener has purchased a HPS lighting system. They may additionally to complete Metal Halide Conversion lamp for your vegetative growth cycle of the yard and then migration to the HPS light for flowering/fruiting phase of growth. This is a very popular way progress plants indoors and will dramatically increase yields. highly recommends the use of an MH conversion lamp if you are using a HPS system on your hydroponic gardening setup, some of us have revealed significant yield increases when using the conversion lamps! "What is a "horticultural" lamp (AgroMax, Sunmaster) and why do I would like one."
  6. 6. A "horticultural" lamp, like the AgroMax or Sunmaster lamp, that could be a specially constructed lamp, designed specifically for horticultural purposes. Generally these lamps offer more usable light for photosynthesis than do standard HPS or MH lamps. Consistently these lamps contain more lumen output then have different spectral outputs when considering different phases of plant growth. Independent research projects have shown yields truly shown to be significantly increased hiring these lamp types. "What wattage lighting system do I would like?" The wattage irregardless of lighting system needed for indoor growing will be based upon a couple of factors. 1) Are you able to come up with the lighting requirements of the plants in the garden? Is it even plants having high, medium or low light levels? 2) What is huge the hydroponic growing system? A garden needs "footcandles" not watts, so it would be best to calculate how many "lumens per square foot" you'll have in the garden. Traditionally, you'll need at the least 2,500 lumens of High Intensity Discharge (H.I.D.) light per square foot of garden. To obtain the square footage of real estate property, simply measure the ground space where property shall be and multiply enough time however by the width. So a 400 watt HPS (50,000 lumens) will light a 4' x 5' garden adequately. Remember, 2,500 lumens per square feet is the minimum light that reaches your plants you'll need. Typically the brighter the garden is, the faster the development and the bigger the yield should be. Some growers suggest a 400 watt light for a piece as affordable as 9 square feet (3' x 3'). "Does my HPS or MH lamp need to "warm-up"?" MH and HPS lamps can be know as High Intensity Discharge (HID) lamps. All HID lamps will require some period of time for the upcoming gas in the arc tube to "produce" in order to get fully bright. A MH lamp usually requires 5-10 minutes for full brightness being HPS lamp might require lower than 5 minutes. Additionally, in any MH or HPS systems, if the light is shifted, even momentarily, the lamp will "extinguish" after which need to totally "cool-down" until the arc will "re- strike" and light-weight up again, this whole process may be the equivalent of 25 minutes. "Do I would like special wiring for our particular indoor garden lighting?" Generally no special wiring is needed. All of the lights we sell arise, tested and certified for safe use with a home. The lights will operate by using standard, household grounded power outlet. The only problems that may occur are when an excess of electrical appliances (lights, fans, etc) are powered using the same circuit. Most homes have 15 or 20 AMP maximum circuits. The AMP usage of those other lighting system needs to be listed on the item information label in your ballast unit. Typically a 400 watt HPS or MH lamp uses about 4 AMPS wile on the other hand a 1000 watt unit you will employ 9.5 AMPS. "Do HPS and MH lamps explode?"
  7. 7. It is suggested by all MH lamp manufacturers the fact lights be postponed a minimum of quarter- hour once per week to stop "non-passive" (rupturing it does not matter lamp) failure. Rtrty recommendation to adhere to. HPS lamps are encountered differently and may operate 24/7 indefinitely so are not going to take "non-passive" failures. Don't spray a tremendous lamp with water or cleaner. Always wait no less than half-hour geared toward the lamp to cool before you clean it with standard window cleaner. "How big electricity does my light use?" Each H.I.D. light uses the dollar amount of wattage the sunshine is plus a further 15% for some ballast. So, a 400 watt HPS uses 400 watts for the upcoming lamp and another 15%, or 60 watts, regarding the ballast - for up to 460 watts total, give or take. It is a the rule of thumb together with the electrical consumption could be somewhat or lower than this. "The amount of time wouldn't it cost to operate my indoor garden lighting system?" Below that can easily be table defined by operating the light only 12 hours just a day at 8 cents per kilowatt hour. View your power company bill on your electric rate. Wattage Estimated monthly cost 150 $4.97 250 $8.28 400 $13.25 1000 $33.12 To calculate your utility cost you will be required to know 3 things: A: Your cost with hardly any energy (usually seen as "KWH" charge in your electric bill) B: The entire watts came lighting system C: The full operating hours ("ON" time) patients lighting system per month. Formula = A * B/1000 * C = Total Energy Cost monthly So for a majority of these table: A = $.08 , B = 460, C = 360 hours (12 daily * per month) = Total charge of $13.25 "120 volt or 240 volt, am I saving electricity?" That is the largest myth in the indoor plant cultivation world. There is absolutely no energy savings through the use of 240 volts rather than 120 volts. Remember back to individuals science class, you learned something called "Ohm's Law", that states P = I * E. On this equation, P = Power (watts), I = current (Amps), E = Voltage. To demonstrate, the ordinary 400 watt HPS lighting method is rated at 3.8 Amps at 120 volts or 1.9 Amps at 240 volts. (Piece of article are gathered found on the electrical label invite your lighting system's ballast unit). Meaning that the energy applied to the 400w HPS light for the different voltages is: 120v = 3.8 Amps x 120 volts = 456 watts 240v = 1.9 Amps x 240 volts = 456 watts While there isn't any energy savings associated with using 240 volts, there is an advantage for hydroponic gardening systems that are choosing many lights. Basically you can operate twice as much of lighting systems on some 240 volt circuit than you possibly can throughout the entire 120 volt circuit. "The volume of do MH and HPS lamps last? When should I replace my lamps?" Most lamps sold have a "rated life" that is stated situated on the carton or on the literature. Rated life refers back to the point when half of the lamps can be "burned out" and not as the lamps will still operate. Most HPS lamps a rated life of 24,000 hours. Most MH lamps a nice rated lifetime of
  8. 8. 10,000-20,000 hours. Because all MH and HPS lamps will slowly "depreciate" (drop in light output) in due course, most indoor gardeners repair the lamp long before it "burns" out. Many indoor gardeners will replace a HPS lamp after 365 days and an MH lamp after 9 months of use. Because your indoor gardening setup yields are so closely tied to light output, a ten% elimination light to the backyard may cause a 10% saving yields. An HPS lamp will lose approximately 20% considering the light before it "burns out" while an MH lamp will lose as much as a whole lot less its light output before it "burns out". "Just why ordering from a beautiful?" Ask any plant and they'll tell you that they like lighting systems from Moreover will probably be lighting systems high-quality, however the gardeners who choose receive their lights quickly in discreetly packaged shipments and save a TON of cash over retail very well as other websites. will meet or beat any advertised price on comparable lighting systems, just let them know if you think you've found a better deal anywhere (not going). "The amount that mushrooms can I grow due to this kit?" Most people dry their exotic mushrooms for longer safe-keeping, which we recommend and provide easy instructions on how to do so. Our Ultra 6 jar kit will grow for the majority of of 2-4 dried ounces of mushrooms. Take into account that variate visit this page