Your SlideShare is downloading. ×
• Open frame electron beam
welded punched out type.
• 36W.
• R0001 to R000250.
LOW OHM BATTERY
SHUNT RESISTORS
HEB
SERIES
...
Sr No. 	 HI-TECH PART NAME	 RESISTIVE MATERIAL	 A (mm)	 B (mm)
	 1 	 HEB36W* R0001 J 	 MANGNIN 	 9.40 ± 0.20	 12.60 ± 0.12...
Upcoming SlideShare
Loading in...5
×

HTR India - Products - Current Sense Resistors - Electron Beam Welded - HEB (English)

1,024

Published on

This product is a Current Sense Resistors of the type Electron Beam Welded.

For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/heb/

Published in: Devices & Hardware
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
1,024
On Slideshare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
3
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "HTR India - Products - Current Sense Resistors - Electron Beam Welded - HEB (English)"

  1. 1. • Open frame electron beam welded punched out type. • 36W. • R0001 to R000250. LOW OHM BATTERY SHUNT RESISTORS HEB SERIES e : info@htr-india.com www.htr-india.com
  2. 2. Sr No. HI-TECH PART NAME RESISTIVE MATERIAL A (mm) B (mm) 1 HEB36W* R0001 J MANGNIN 9.40 ± 0.20 12.60 ± 0.127 2 HEB36W* R000125 J MANGNIN 12.20 ± 0.20 15.40 ± 0.127 3 HEB36W* R000250 J MANGNIN 22.90 ± 0.20 26.05 ± 0.127 PHYSICAL CONFIGURATION DIMENSIONAL TABLE LOW OHM BATTERY SHUNT RESISTORS HEB ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS MECHANICAL SPECIFICATIONS Power Rating (Rated Ambient Temperature ) Full power dissipation at 70° C and linearly derated to zero at + 170 ° C Insulation Not Insulated Resistance Tolerance ±5% (Available upto ±1%) Temperature Range - 65° C to +170° C Voltage Rating / Limiting Voltage / Max. Working Voltage P x R Short time Overload (5 x Rated Power for 5 Secs.) ∆R ± [ 1.25 % + R0005 ] Resistance Temperature Characteristics <225 ppm/°K Damp Heat (Steady State ) ∆R ± [ 0.5 % + R0005 ] – Average (40°C at 93 % R.H. for 1000 Hrs. – no load applied ) Endurance – Load Life [ 70°c with limiting voltage ∆R ± [ ≤2.75 % + R0005 ] – Average – 1.5 hours on / 0.5 hours off for 1000 hours ] Resistance to Soldering heat - (350° for 30 Secs) ∆ R ± [ 0.2 % + R0005 ] – Typical Solderabillity ( As per IEC pub. 60068-2-20 ) Must meet the requirements laid down PARAMETER / PERFORMANCE TEST TEST METHOD PERFORMANCE REQUIREMENTS PARAMETER / PERFORMANCE TEST TEST METHOD PERFORMANCE REQUIREMENTS e : info@htr-india.com www.htr-india.com TECHNICAL INFORMATION 1) Ideal for Current sense and High Current application. 2) Sulfer free copper connection. PRINTING / MARKING Eg. For HEB36W* R0001 ± 5% Marking will be HTR 0.1 DATECODE PACKAGING Resistors shall be packed in sealed plastic packets placed in small cardboard cartons (Type‘A’Box ) of approximate size 200mmx150mmx70mm - 200pcs. such 2 Boxes packed in Master Carton of approximate size 310mmx205mmx95mm. 2.2 18.00 CHAMPER 2x45˚ (TYP) 9.00 Ø7.00 3.0 85.00 60.00 6.30 Cu VOLTAGE TEST POINTCALIBRATION NOTCH -2mm (Ref) Cu A B Ø7.0 Length tolerance iso 2768 Nominal size range allowance 0.5 to 3 ±0.1 ABOUT 3 TO 6 ±0.1 6 TO 30 ±0.2 30 TO 120 ±0.3 120 TO 400 ±0.5 400 TO 1000 ±0.8 1000 TO 2000 ±1.2 FOR NOMINAL SIZES 0.5 : SPECIFY ALLOWANCE

×