Your SlideShare is downloading. ×
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
normas quipment-solutions-guide
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×
Saving this for later? Get the SlideShare app to save on your phone or tablet. Read anywhere, anytime – even offline.
Text the download link to your phone
Standard text messaging rates apply

normas quipment-solutions-guide

1,513

Published on

normas

normas

Published in: Engineering
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
1,513
On Slideshare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
1,305
Comments
0
Likes
0
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. volume 39 ● issue 19 T E S T & M E A S U R E M E N T Rental Solutions Guide techrentals your rental business partner Y E A R S
  • 2. 1800 632 652 www.techrentals.com.au rent@techrentals.com.au Office Locations TechRentals Australia Adelaide 169 South Road Ridleyton South Australia 5008 P 08 8302 8800 | F 08 8302 8899 Brisbane 72 Donaldson Road Rocklea Queensland 4106 P 07 3717 9100 | F 07 3077 8872 Darwin Unit 3, 101 Coonawarra Road Winnellie Northern Territory 0820 P 08 8947 2860 | F 08 8947 2901 Melbourne 18 Joseph Street Blackburn North Victoria 3130 P 03 9896 3000 | F 03 9896 3099 Newcastle Unit 2, 1 Hartley Drive Thornton New South Wales 2322 P 02 4966 5910 | F 02 4966 3586 Perth 122 Kewdale Road Kewdale Western Australia 6105 P 08 9441 3900 | F 08 9441 3999 Sydney 41 Enterprise Circuit Prestons New South Wales 2170 P 02 8777 0800 | F 02 8777 0877 Townsville Unit 2, 14 Blackhawk Boulevard Thuringowa Central Queensland 4817 P 07 4773 7788 | F 07 4723 5397 TechRentals Malaysia 603 5632 1135 www.techrentals.com.my SELANGOR D.E 38 Jalan PJS 11/3 Bandar Sunway 46150 Petaling Jaya Selangor Darul Ehsan Malaysia P +60 3 5632 1135 F +60 3 5632 5409 TechRentals New Zealand* 0800 832 475 www.techrentals.co.nz AUCKLAND 669 Great South Road Penrose Auckland New Zealand P +64 9 589 2030 F +64 9 589 2031 *distributor of TechRentals Australia TR VMS (Calibration - Repair - Sales) BRISBANE 72 Donaldson Road Rocklea Queensland 4106 P 07 3717 9100 F 07 3717 9148 SYDNEY 41 Enterprise Circuit Prestons New South Wales 2170 P 02 8777 0800 F 02 8783 5171 PENANG 1-10-07, Suntech @ Penang Cybercity (1264) Lintang Mayang Pasir 3 11950 Bayan Baru Penang P +60 4 619 2641 F +60 4 619 2643
  • 3. Contents Your trusted partner in technology. Offering innovative solutions through our leading brands: techrentals vidcom telecom Save your time and reduce your real costs. Find out all about our Configuration and Download solutions on page 43. Visit TechRentals Wiki This resource centre provides manuals, technical information and how-to videos. www.techrentals.com.au select Technical Tips and Videos. 1. stretch your budget Test equipment is often used just some of the time. Rental allows you to pay for it only when you use it, as well as stretching your budget by accessing more equipment than you could if you purchased it outright. 2. utilise operating expense Test equipment is expensive often sitting on a shelf collecting dust – not an effective use of your valuable business capital. Rental allows you to free up cash for other parts of the business where it can be used to generate additional profits. 3. conduct product research before purchasing It is not always clear immediately which make and model will fulfil your requirements best. Trialling it on casual rental gives you hands-on experience to guide purchase decisions. 4. recover costs more quickly Generally rental payments are fully tax deductable and the expense can be recovered far more quickly than the tax allowances for ongoing asset depreciation.† 5. eliminate running costs The expense of maintaining, calibrating and warehousing your test and measurement equipment can be high. With rental you avoid these costs, as well as freeing up storage space within your premises. 6. cost allocation is simplified Rental payments are easy to track and account for in your business, making it easy to allocate appropriate costs to departments, clients or specific projects. 7. respond to sudden demands At peak periods, for unexpected projects, or when essential equipment breaks down, rental can put the necessary equipment in your hands ensuring seamless operations. 8. apply new technologies & avoid obsolescence Rental allows you to update your equipment in line with other businesses and take advantage of new technologies. It also avoids the potential cost of owning equipment that can be quickly superseded. 9. preserve credit Renting avoids the potential cost of utilising credit facilities such as an overdraft or credit cards, which are often used for equipment purchases. 10. technical support When you rent from TechRentals you’ll have the support of an experienced team of product experts, who’ll help you get the most from your equipment. And in the unlikely event of equipment failure we will do our utmost to rectify the issues as soon as possible. † Please ensure you obtain independent professional taxation advice. Why rental makes good sense General Index 2, 3 & 4 Manufacturers Index 5, 6 & 7 Electronics 8-13 Radio Frequency 14-19 Data & Telecommunications 20-23 Electrical Power 24-37 General Industrial & Process Measurement 38-51 Physical Measurement 52-57 Construction, Building Services & Survey 58-62 Environmental, OHS, Chemical & Laboratory 63-69 Other Products 70 hirecom 1
  • 4. General Index A AC See Electrical Power AC Sources/Inverters/Generators 36 Accelerometer 55 Adhesion Tester 52 Air Flow 58, 59, 65 Quality 58, 59, 65 Air Balancing Hood 58 Air Conditioner Valve Balancing 59 Air Conditioning Coolant Flow 69 Electronic Manifold 59 Measurement 58 Valve Balancing 59 Ventilation Meter 59 Air Conditioning & Air Flow 58 Air Quality Monitoring 58, 63, 64, 65 Particles 64, 65 Pressure & Humidity 58, 65 Air Quality & Heat Stress 65 Airborne Dust & Particle Meter 64 Alignment 42, 55 Anemometer 58, 59 Antenna & Cable Test 16 Antennas 19 Appliance Tester 25 Area Heat Stress 65 Audio Analysers 18 B Balances 55, 69 Balances & Scales Below 8kg 69 Balancing Machinery 59 Balometer 58 Barometric Loggers 68 Bath Constant Temperature 42 Ultrasonic 50 Battery Management Systems 36 Blast Loggers 56 Body Vibration Measurement 55, 56 Bore Hole Water Quality 67, 68 Borescopes 41 Bridge LCR 10 C Cable Fault Locator 24 LAN Test 20 Locator 20, 24, 61 Tester 20 Cable & Fault Locators 61 Cable & Pipe Tracers & Fault Locators 24 Cable Analysers 20 Cable Locators 61 Calibrators Current 11, 42, 45 Current Loop 11, 42, 44, 45 Dry Block Temperature 42, 45 Electronic 11 Fitting Set 44 Hydraulic 42, 43, 45 Industrial 42, 45 Intrinsically Safe Loop 43 Laboratory 45 Loop 42, 45 Pneumatic Instruments 42, 45 Pressure 42, 43, 44, 45 Process 42, 44, 45 Resistance 11, 42, 44, 45 Temperature 42, 45 Voltage 11, 42, 44, 45 Camera Endoscope 41 High Speed 41 Pipe Inspection 41, 61, 62 Thermal Imaging 39, 40 Video 41 Carbon Dioxide (CO2) 50, 63, 65 Carbon Monoxide & Nitrogen Dioxide Monitors 63 Carbon Monoxide (CO) 50, 63, 64, 65 Cat 5, 5E, 6 20 Charge Amplifier 55 Chart Recorders 45, 49 Chemical & Analytical 69 Circuit Breaker Analyser System 34, 35 Circuit Breaker Testers 34 Circuit Tracer 24 Clamp-on Sensors 31 Clean Room Monitor 64 Cleaver - Fibre Optic 23 Coating Thickness 52, 54 Combustion Gas Analysis 50 Combustion, Flue & Industrial Gas Analysers 50 Communication Test Sets 16, 18 Compressor Output Flow 65 Quality 65 Concrete Cover Meters 59 Concrete Hardness Testers 60 Concrete Testing Adhesion 52 Corrosion 60 Cover Meters 59, 60 Moisture Meters 62 Reo Depth 60 Test Hammer 60 Concrete Testing Equipment 59 Concrete Thickness Gauges 59, 60 Conductivity & Salinity 68 Confined Space Entry 63, 64 Construction, Building Services & Survey 58 Air Conditioner Valve Balancing 59 Air Conditioning & Air Flow 58 Concrete Testing Equipment 59 Distance Measurement & Surveying 62 Ground Penetrating Radar 61 Material Moisture Meters 62 Pipeline & Cavity Inspection 61 Underground Services Location 61 Utility Leak Detection 61 Counting Scales 55, 69 Crane Scales 54, 55 Current Clamp 28, 30, 31, 32, 36 DC Source 10 Injection 35 Input Logger 47 Loop 42, 44, 45 Meter 28, 31, 49, 69 Primary Injection 35 Probe 10, 24, 31, 32 Secondary Injection 35 Transformer (CT) 31 Current Clamps Probes & Accessories 31, 32 Current Injectors 35 Current Transformer Testing 34 D Data & Telecommunications 20 Cable Test 20 DSL/POTS Test Set 22 Ethernet Analysers 20 Ethernet Loopback 20 Ethernet Test Set 20 Etherscope 20 Fibre Optic Launch Cables & Patch Leads 23 Fibre Optics 23 Fusion Splicers 23 LAN Analysers 20 LAN Cable Testers 20 LAN/WAN Analysers 20 Light Source 22 Light Sources & Power Meters 22 OTDR & Fibre Inspection 23 PDH/SDH Analysers 21 Permanent Link Adaptors 20 WAN Analysers 20 Data Loggers 47, 48 DC High Voltage 10, 31, 32, 33 DC Power Supplies 10 DC Power Supplies & Loads 10 Decade Resistance Box 11, 45 Demand Analysers 27 Dewpoint 65 Digital Storage Oscilloscopes 8, 10 Dissolved Oxygen 67 Distance Measurement 62 Distance Measurement & Surveying 62 Distortion Analysers 18 Dry Block Calibrators 45 DSL/POTS 22 DSn/PDH Ethernet Analyser 22 Ductor 25, 27 Dust Measurement 64, 65 E E & H Field Strength Meters 11 E1/E3 Tester 21, 22 Earth Leakage 25, 32, 33, 34 Earth Testers 25 Electrical Cable Test 25, 32, 33, 34 Surge Generator 24 TDR 24 Electrical Installation & Test Appliance Tester 25 Earth Leakage (RCD) 25, 32, 33, 34 High Voltage Test (Hipot) 32, 33 Insulation Oil Tester 33 Insulation Test 24, 25, 32, 33, 34 Resistance Test 25, 27, 32 Soil/Ground Resistance 25 VLF Testers 33 Electrical Power 24 AC Sources/Inverters/Generators 36 Battery Management Systems 36 Cable & Pipe Tracers & Fault Locators 24 Circuit Breaker Testers 34 Current Clamps Probes & Accessories 31 Current Injectors 35 Electrical Testers 24 Insulation Testers & Meggers to 20kV 32 Micro-Ohm Meters & Earth Testers 25 Oil, Hipot & VLF Testers above 20kV 33 PAT Testers & RCD Testers 25 Power Analysers & Recorders 27 Power Transformers & Variacs 36 Protection Relay Testing Systems 35 Transformer Testers 34 Electrical Power Generation & Transmission Current Injection 35 High Voltage Test (Hipot) 33 Power Quality 24, 27, 28, 30, 31 Protection Relay Test 34, 35, 36 Electrical Power Quality Harmonics 24, 27, 30, 31 Power Factor 24, 27, 30, 31 Power Logger 28 Power Quality Analysers 27, 28, 30, 31 Electrical Power Sources Battery Management Systems 36 Current Injectors 35 Programmable 36 Electrical Testers 24 Electrical Transducers 24 Electrochemistry 67 Electrometers 8 Electronic Calibrators 11 Electronic Load 10 Electronics 8 DC Power Supplies & Loads 10 Digital Storage Oscilloscopes 8 E & H Field Strength Meters 11 Electronic Calibrators 11 EMC & Power Disturbance Simulators 12 Function Generators 10 Gauss/Tesla Meters 11 LCR Meters 10 Multimeters& Electrometers 8 Probes & Accessories 10 Spectrum Analysers - Low Frequency 11 TV Test Equipment 11 Electrostatic Charge Measurement 8 Electrostatic Meters 8 EMC & Power Disturbance Simulators 12 EMC Test Equipment 12 EMC/EMI Test Equipment 12 Endoscopes 41, 61 Endoscopes Borescopes Visual Inspection 41 Environment, OHS, Chemical & Laboratory Air Quality & Heat Stress 65 Airborne Dust & Particle Meters 64 Balances & Scales below 8kg 69 Chemical & Analytical - General 69 Environmental Gas & Vapour Meters 63 Environment Flow Meters 69 Floor Slip Testers 67 Laboratory Instruments, Spectroscopy 69 Light Meters, UVA/B/C Measurement 68 2
  • 5. General Index cont’d. Moisture & Humidity Meters 65 Noise & Sound Analysers 65 Personal Gas & Vapour Monitors 64 Radiation Monitoring & Protection 66 Water Quality, pH Meters & Electrochem 67 Weather Stations 68 Environmental , OHS, Chemical & Laboratory 63 Environmental Chambers/Ovens 50 Environmental Flow Meters 69 Environmental Gas & Vapour Meters 63 Environmental Noise 65 Environmental Noise Loggers 65, 66 Environmental Test Chambers/Ovens 50 Ethernet Loopback 20 Ethernet Test Set 20 Excavator Cable Locators 61 F Fault Locators 24, 61 Fault Loop Impedance Tester 25 Fibre Inspection & Test Kit 23 Fibre Inspection-Capture Probe 23 Fibre Optic Launch Cables & Patch Leads 23 Fibre Optics 23 Cleaver 23 Fibrescope 61 Field Strength Meters 11 Flaw Detector 52 Floor Slip Testers 67 Flow Hood 58 Flow Meters 49, 50, 69 Compressed Air 49 Doppler 49, 50 Gas 49 Liquid 49, 50, 69 Non-Intrusive 49, 50 Open Channel 49, 69 Transit Time 49, 69 Ultrasonic 49, 50, 69 Flow Meters for Liquids & Gases 49 Flue Inspection 41, 62 Force Gauges 54 Formaldehyde Meters 63 Frequency Counters 14 Frequency Response Analysers 34 Function Generators 10 Fusion Splicers 23 G Gamma Radiation 66 Gas 63 Carbon Dioxide (CO2) 50 Carbon Monoxide (CO) 50 Flammable (LEL) 63, 64 Formaldehyde 63 Hydrogen Sulphide (H2S) 63, 64 Methane (CH4) 63 Nitric Oxide (NO) 50 Nitrogen Dioxide (NO2) 50 Oxygen (O2) 50, 63 Ozone (O3) 63 Petroleum Hydrocarbons 63 Refrigerant 63 SF6 64 Sulphur Dioxide (SO2) 63 VOC 63, 64 Gas & Vapour Meters 63 Gas Analysis & Monitoring 50, 63, 64 Gauss/Tesla Meter 11 General Industrial & Process Measurement 38 Combustion, Flue & Industrial Gas Analysers 50 Data Loggers 47 Dry Block Calibrators 45 Endoscopes Borescopes Visual Inspection 41 Environmental Test Chambers/Ovens 50 Flow Meters for Liquids & Gases 49 High Speed Video Inspection Cameras 41 High Speed Waveform Recorders 46 Industrial Process Calibrators 42 Infrared Thermal Imaging Cameras 39 Laser Rotational Shaft Alignment 42 Pressure & Humidity Transducers 49 Pressure Vacuum Gauges/Recorders 49 Strip Chart Recorders 45 Tachometers/Stroboscopes 41 Temperature Meters/IR Thermometers 38 Ultrasonic Baths 50 Ground Penetrating Radar 61 H Hardness Testers 52 Harmonics (Power) 27, 28, 31 Hart Communicators 43 Heat Stress 65 High Frequency Spectrum Analysers 14, 16 High Speed Video Cameras 41 High Speed Video Inspection Cameras 41 High Speed Waveform Recorders 46 High Voltage Insulation Dielectrics Test Set 33, 34 Hipot Testers 32, 33 Holiday Detector 52 Hot Wire Anemometer 58, 59 Humidity Chamber 50 Concrete 59 Indoor Air 65 Logging 47, 48 Natural Gas 65 Thermohygrograph 65 Transducers 49 Weather 68 HVAC & IAQ 58, 59, 65 Hybrid Recorders 46 Hydraulic Pressure 42, 43, 52 I Illuminance Meter 68 Inclinometers 54 Indoor Air Quality 65 Industrial Process Calibrators 42, 45 Infrared Cameras 39, 40 Infrared Thermal Imaging Cameras 39 Infrared Thermometers 38 Injection Test Sets 35 Instrumentation Amplifiers 45, 46 Insulation Diagnostic Analysers 34 Insulation Testers 25, 32 Insulation Testers & Meggers to 20kV 32, 33 Intrinsically Safe Current Loop Calibrators 42 Gas Monitors 63, 64 Moisture Analysers 65 Photo-Ionisation Detector (PID) 63, 64 IR Thermometers 38 L Laboratory Ovens 50 LAN Analysers 20 Cable Certification 20 Cable Testers 20 LAN Analysers/Management 20 LAN Cable Testers 20 LAN/WAN Analysers 20, 21 Landfill Gas Monitors 63 Laser Distance & Speed 56, 62 Laser Pipe Alignment System 42 Laser Rotational Shaft Alignment 42 LCR Meters 10 Leak Detectors Gas Pipe 61, 63, 64 Microwave Oven 66 Refrigerant 63 Water 61 Light Measurement 62, 68 Light Meters, UVA/B/C Measurement 68 Light Source 22 Light Sources & Power Meters 22 Linear Position Transducers 54 Liquid Flow Loggers 69 Liquid Flow Meters 49 Load Cells 54 Logger Accessories 47 Autoclave 47 Data 47, 48 Explosion 56 Flow 49 Humidity 47, 48 Temperature 47, 48 Loggers See also Recorders Low Frequency Spectrum Analysers 11 Luminance Meter 68 Lux Meter 68 M Machinery Balancing 55 Vibration 55, 56 Magnetic Field Meters 11 Manometers 58, 59 Material Hardness Testers 52 Material Moisture Meters 62 Material Testing 69 Memory Recorders 46 Metal Detectors 70 Methane Monitors 63 Micro-Ohm Meters 25, 27 Micro-Ohm Meters & Earth Testers 25 Microwave Leakage Detectors 66 Microwave Oven Survey Meters 66 Modified Atmosphere Packaging Test 50, 63 Moisture Concrete 62 Timber 62 Wood 60 Moisture & Humidity Meters 65 Moisture Analysers 65 Moisture Balance 69 Multimeters 8 Multimeters & Electrometers 8 N Natural Gas 65 Network Analyser Antenna & Cable Test 16 Cable Test 16 Power 27, 30 RF 16 Network Analysers 16 Network Analysers/Antenna & Cable Test 16 Noise & Sound 65 Noise & Sound Analysers 65 Noise Loggers 65, 66 Non-Destructive Testing (NDT) 52, 54 O Occupational Health & Safety 63 Air Quality 58, 59, 65 Appliance Testing 25 Confined Space Entry 63, 64 Floor Slip Testers 67 Formaldehyde 63 Heat Stress 65 Lighting 68 Noise & Sound 65 Ozone 63 Radiation 12, 66, 67 UV Exposure 68 Vibration 55 Volatile Organic Compound (VOC) 63 Oil Insulation Testers 33, 34 Oil, Hipot & VLF Testers Above 20kV 33 Optical Power Meter 22 Oscilloscopes Digital Storage 8, 10 Portable 8 OTDR 23 OTDR & Fibre Inspection 23 Oven 50 Oxygen & CO2 Analysers 50, 63, 64 Oxygen (O2 ) 50, 63, 64 Ozone (O3 ) 63 P Pancake Load Cell 55 Particle Counters 64 PAT 25 PAT Testers & RCD Testers 25 PDH Analysers 21 PDH/SDH Analysers 21 Permanent Link Adaptors 20 Personal Gas & Vapour Monitors 64 Petrochemical Contamination 63 pH Measurement 67 pH Meters 67 pH reading for Meat Standards 67 pH, mV & Temperature Measurement 67 Photo-Ionisation Detector (PID) 63, 64 3
  • 6. General Index cont’d. Physical Measurement 52 Force Gauges 54 Inclinometers 54 Load Cells 54 Material Hardness Testers 52 Non-Destructive Testing 52 Position Transducers 54 Speed Measurement 56 Vibration Analysis 55 Weighing & Counting Scales Over 8kg 55 Pinhole Detector 52 Pipe Locators 61 Pipeline & Cavity Inspection 61 Pipeline Camera Inspection System 61 Pipeline Inspection 41 Pitot Tube 58 Probes & Accessories 10 Portable Appliance Testers 25 Position Transducers 54 POTS 22 Power See Electrical Power Power Analysers 27 Power Analysers & Recorders 27, 28 Power Demand Analysers 27 Power Disturbance 24, 27, 30, 31 Power Loggers 28, 31 Power Meter - RF 18 Power Meters 18 Power Meters & Sensors 18 Power Supplies - DC 10 Power Transformer Testers 34 Power Transformers 36 Pressure Calibrator 42, 43, 44, 45 Circular Chart Recorder 49 Indicator/Gauge 49 Logging Gauge 49 Transducers 49 Pressure & Humidity Transducers 49 Pressure Calibrators 44 Pressure Recorders 45 Pressure Transducers 44 Pressure Vacuum Gauge/Recorders 49 Primary & Secondary Test Systems 34, 35 Probes Current 10, 24, 31, 32, 36 High Voltage 10 Line Logic 46 Process Calibrators 44, 45 Profibus 44 Prospecting Metal Detectors 70 Protection Relay Test 34, 35, 36 Protection Relay Testing Systems 35 Pulse Porosity Detectors 52 Pumps 42, 43, 45 R Radar Speed Gun 56 Radiation Monitors 12, 66, 67 Radiation Monitoring & Protection 66 Radio Frequency 14 Antennas 19 Communication Test Sets 16 Distortion Analysers 18 Frequency Counters 14 Network Analysers/Antenna & Cable Test 16 Power Meters - RF 18 RF Accessories 19 RF Amplifiers 19 RF Attenuators 19 RF Signal & Sweep Generators 14 Spectrum Analysers - High Frequency 14 Radiometers 68 RCD Test 25, 32 Recorders 47 Chart 45, 49 Hybrid 46 Memory 46 Pressure 45, 49 Refrigerant Leak Detection 63 Relay Test 35, 36 Resistance Calibration 11, 42, 45 Decade 11, 45 Ground/Soil 25 Micro-Ohm 25, 27 Static 32 Tester 25, 32, 33, 34 RF See also Radio Frequency RF Accessories 19 RF Amplifiers 19 RF Attenuators 19 RF Signal & Sweep Generators 14 RF Sweep Generators 14 Rotating Balancing 55, 56 RTD Calibrator 42 S Safety Bolt Inspection System 54 Salinity & Conductivity 68 Scales 54, 55, 69 Scopemeters 8 SDH Analysers 21 Security Metal Detectors 70 Security Equipment 70 Sensors - RF 18 Shaft Alignment 42, 55 Shaker Table 55 Signal Generators 14 RF 14 Smoke Generating Machine 58 Soil Resistivity 25 Sound Dose Meter 66 Measurement 65 Signal Analysis 65 Sound Level Meter 55, 56, 65, 66 Vibration 55, 56 Spectrophotometer 69 Spectroscopy 69 Spectrum Analysers High Frequency 14, 16 Low Frequency 11 RF 11, 14, 16 Spectrum Analysers – Low Frequency 11 Spectrum Analysers – High Frequency 14 Speed Measurement 56 Splicer - Fibre Optic 23 Startup Current 28, 30, 31, 32 Static Discharge Generators 12 STM1 ... STM64 21, 22 Strip Chart Recorders 45 Stroboscope 41 Surge Generators 24 Surge Transient Generator EMC/EMI Test 12 Sweep Generators 14 T Tachometers 41 Tachometers/Stroboscopes 41 Tan Delta Measurement 33, 35 TDR 24 Telecommunications 20, 21 Access Tester 21 Analysers 21 CDMA 18 Data Tester 21 PDH 21 POTS 22 SDH 21 Temperature Humidity Loggers 48 IR Thermometers 38 Logging38 Probe 38 Thermocouple 38 Thermometers 38, 39 Temperature Bath 45 Temperature Meters 38 Temperature Meters/IR Thermometers 38 Tension 54 Test & Tagging 25 Test Chambers 50 Thermal Imaging Cameras 39, 40 Thermocouples 38 Thermohygrograph 65 Thickness Gauges 52 Time Domain Reflector TDR 24 Torque Wrench 54 Total Dissolved Solids (TDS) 68 TPH Monitor 63 Tracking Generator 14 Transducers Electrical 24 Humidity 49 Position 54 Pressure 49 Temperature 49 Transformer Testers 34 Transient Burst 12 Transport Inclinometers 54 Turbidity 67, 68 TV Analyser 11 TV Test Equipment 11 U Ultrafine Particle Counter 64 Ultrasonic Baths 50 Ultrasonic Probe 52 Underground Services Location 61 Utility Leak Detection 61 UV Exposure 68 V Valve Balancing (Air Conditioning) 59 Variacs 36 Vehicle Volume & Speed Counters 56 Ventilation Meters 59 Vibration Accelerometer 55 Analyser 55, 56 Blast Logging 56 Table 55 Whole Body 55 Vibration Analysis 55 Vibration Loggers 56 Video Endoscope 41 High Speed 41 Pipeline Inspection 41, 61 Viscometer 69 Visual Inspection 41, 61, 62 Visual Inspection Equipment 41 VOC Monitors 63 Volatile Organic Compounds (VOC) 63, 64 Voltage Calibrators 42, 45 W Walk Through Metal Detectors 70 WAN Analysers 20 Water Conductivity 68 Depth 49, 67, 68, 69 Depth Measurement 67 Flow 49, 50, 69 pH 67 Quality 67 Sampling 67 Water Quality, pH Meters & Electrochem 67 Water/Oil Bath Temperature Calibrators 42 Water/Oil Temperature Bath 45 WBGT 65 Weather 68 Weather Stations 68 Weighing & Counting Scales Over 8kg 55 Wet & Dry Block Calibrators 45 Wind Speed & Direction 59, 68 Wind Turbine Lightning Protection Test Lead Set 27 Winding Transformer Meter 34 Wood & Masonry Testing Moisture Meter 60 Workplace Safety See Environmental & OHS X X-Ray Measurement 66 4
  • 7. ABACUS ABA,301 64 ABB ABB,CB2000 24 ACTERNA ACT,MTS8000 21 ADVANTEST ADV,TR1720 19 ADV,U3771 14 AERQUAL AER,500L 63 AGILENT (Also see Hewlett-Packard) AGI,DSOX3024A 8 AGI,MSO6104A 8 AGI,MSOX3024A 8 AGI,N9304A 14 AGI,N9344C 14 AGI,N9344C-TG 14 AH SYSTEMS AH,ANTENNA 19 AH,SAS-200/550 19 AH,SAS-200/571 19 AH,SAS-571 19 AIC AIC,SG-AST-500 54 AIRMAGNET AIR,AIRMAG SPEC AN 14 AIRFLOW AIR,AV2-NATA 58 AIR,PITOT-36 58 ALNOR ALN,EBT-721-A3 58 ALN,EBT-731 58 AMETEK AME,CADET-25N 54 AME,PPCE 42 A&D MERCURY AND,FC-10K 55 AND,FG-150KB 55 AND,FS-15KA 55 AND,HF-300G 69 AND,HP-40KA 55 AND,MX50 69 ANRITSU ANR,50-30-18 19 ANR,ANTENNA 19 ANR,CMA4500SM-MM 23 ANR,MA2104A 18 ANR,MS2711A 14 ANR,MS2712E 14 ANR,MS2721A 16 ANR,S331D 16 ANR,S331E 16 ANR,S332D 16 ANR,S332E 16 ANR,S332E-CMAP-MOD 16 ANR,S820D 16 ANR,WAVEGUIDE-ADAP 16 ANT ANT,OMNIDIRECTIONAL 19 AQUA AQU,SNAKEEYE3 61 ARCHOS ARC,AV500 61 ARL ARL,EL-316 65 ARL,NGARA 65 ATLAS ATL,TCS-60 55 AUSTRALIAN RECTIFIERS DIM,D201P 36 VAR,D-283-OB 36 BARLO BAR,MTC-150 54 BAR,STC-10000 54 BAR,STC-500NATA 54 BAUR BAU,DPA75 34 BEAMEX BEA,MC5 42 BEA,MC5-IS 42 BEA,MC6 42 BELL BEL,4190 11 BEL,5180 11 BIDDLE BID,550005 34 BIRD BIR,43 18 BIR,ELEMENT-HF 18 BIR,ELEMENT-LF 18 BRUEL & KJAER BK,2238E-NATA 66 BK,2239A-NATA 66 BK,4448-IS-3KIT 66 BW HONEYWELL BW,BUMP 64 BW,GA-SPAK 64 BW,MICROCLIP 64 CASELLA CEL CAS,MICROTHERM 65 CHAUVIN ARNOUX CHA,PROBE-I 10 GRIDSENSE CHK,CK1 31 CHK,CK5 31 CHK,CR100 31 CHK,CR500 31 CHK,PM20 27 CHK,PM30 27 CHK,PM30PLUS 27 CHK,PM35 27 CHK,PM40PQA 28 CHK,PM45 28 CHROMA CHR,61501 PAC-PS 36 COM-POWER CORPORATION COM,AH-118 19 CRYSTAL ENGINEERING CRY,NVISION-30-NATA 42 CRY,XP21-100-NATA 49 CRY,XP21-300-NATA 49 CRY,XP2I CAL KIT 1 42 CRY,XP2I CAL KIT 345 43 CRY,XP2I CAL KIT 7 43 CRY,XP2I-10K 49 CRY,XP2I-10K-NATA 49 CRY,XP2I-1K-NATA 49 CRY,XP2I-3K 49 CRY,XP2I-3K-NATA 49 CSCOPE INTERNATIONAL CSC,CATXDSGA-KIT 61 CSC,CATXDSGV-KIT 24 CSC,CATXDSGV-KIT 61 CONCEPT SMOKE SYSTEMS CSS,COLT4 58 DATATAKER DE,CANGATE 47 DE,DT600 47 DE,DT80 47 DE,DT800 47 DE,DT80M 47 DE,DT85 48 DEFELSKO CORPORATION DEF,POS-200ADV 52 DEF,POS-6000 52 DEF,POSITEST 52 DETEC DET,DH-50-KIT4 70 DILLION DIL,ED2000-5K 54 DIL,EDX-20T-NATA 55 DRANETZ-BMI DRA-BMI,PG4400 28 DRA-BMI,PX5 28 DRA-BMI,TR2501 31 DRA-BMI,TR2510 31 DRUCK DRU,DPI104-350 43 DRU,DPI603-2 43 DRU,DPI603-20 43 DRU,DPI610-2 43 DRU,DPI610-20 43 DRU,DPI610-20-NATA 43 DRU,DPI610-2-NATA 43 DRU,DPI610-400 43 DRU,DPI610-400-NATA 43 DRU,DPI615-20-NATA 43 DRU,DPI705 58 DRU,DPI705-IS 58 DRU,PTX1400-25 49 DRU,PTX1400-600 49 DRU,PV411A 43 DRU,UPS III-IS 43 EA TECHNOLOGIES EAT,ULTRATEVPLUS 32 ELCOMETER ELC,331-B 59 ELC,331-SH 60 EMERSON EME,375 43 EME,475 43 ENI ENI,604L 19 ETM ETM,9900 48 EXCALIBER EXA,1000 70 EXFO EXF,AXS-200_850 20 EXF,PPM352_FIP400 22 EXFO,ETS-1000L 20 EXFO,FTB-860G 20 EXFO,PPM350B 22 FIBREOPTIC FIB,LAUNCH MM 50UM 23 FIB,LAUNCH MM 62.5UM 23 FIB,LAUNCH SM 9UM 23 FIB,MTFS15-1000 41 FIT FIT,HP 44 FIT,LP 44 FITEL FIT,S123M12 23 FIT,S178_S325 23 FIXTURELASER FIX,DIRIGO 42 FIX,PAT 42 FLEXIM FLE,G608 49 FLIR SYSTEMS FLI,E60 39 FLI,T390 40 FLUKE FLU,1587 32 FLU,1623-KIT 25 FLU,1625-KIT 25 FLU,1630-EARTH CLAMP 25 FLU,1653 32 FLU,1735 28 FLU,199C-SCOPEMETER 8 FLU,2042 24 FLU,289 FLUKEVIEW 8 FLU,28II-EX 8 FLU,345 28 FLU,376 31 FLU,435 28 FLU,481 66 FLU,52-2 38 FLU,54-2B-FVF 38 FLU,5500A 11 FLU,5500A-NATA 11 FLU,576 39 FLU,700P08-70BAR 44 FLU,700P31-690BAR 44 FLU,700PD6-7BAR 44 FLU,718-300G 44 FLU,719-100G 44 FLU,719-30G 44 FLU,725 44 FLU,725-NATA 44 FLU,726 44 FLU,743B 44 FLU,744 44 FLU,773 45 FLU,789 PROCESSMETER 45 FLU,80K-40 10 FLU,80TK 38 FLU,810 55 FLU,87-5 8 FLU,9141-NATA 45 FLU,9150-NATA 45 FLU,9170 45 FLU,9170-R-NATA 45 FLU,990DSL 2/2+ 22 FLU,DSX-5000 20 FLU,DTX1800 20 FLU,DTX-MFM2 20 FLU,DTX-OTDR 20 FLU,DTX-PLA 20 FLU,DTX-SFM 20 FLU,DTX-SFM2 20 FLU,EI-162BN 25 FLU,ETHERSCOPE-EX 20 FLU,FTK1000 22 FLU,FTK150 22 Manufacturers Index 5
  • 8. FLU,I5SPQ3 31 FLU,OPTIFIBER-PRO Q 23 FLU,OPTIFIBER-PRO-MM 23 FLU,OPTIVIEW-GIG 20 FLU,Ti25 40 FLU,Ti32 40 FLU,Ti32_WIDE-ANGLE 40 FLU,TiR32 TELEPHOTO 40 FLU,VR1710 28 FOUIER SYSTEMS FOU,DAQPRO-2 48 FUJIKURA FUJ,FSM60R-CT30 23 FUJ,FSM60S-CT30 23 FUJ,FSM70S 23 FUTEK FUT,IHH500-20T 55 FUT,IHH500-2T 55 GARRETT GAR,CS5000 70 GE GE,DYNAMIC 52 GEOTECH GEO,GEM5000 63 GLOI AB GLO,ALISENSOR 54 GLOBAL WATER GLO,FP111 69 GENRAD GR,1433-20 11 GR,1433B-NATA 11 GR,1433F-NATA 11 GRANT GRA,GR150-S5-NATA 45 GTI SPINDLE GTI,IPAD3VAB 55 GUTERMANN GUT,AQUASCOPE3 61 HART HAR,1523-NATA 39 HEALTH PHYSICS INSTRUMENTS HPI,CYPHER5000 66 HEWLETT-PACKARD (Also see Agilent) HP,33120A 10 HP,33220A 10 HP,33250A 10 HP,34401A 8 HP,35670A 11 HP,53181A 14 HP,5350B 14 HP,6675A 10 HP,8449B 19 HP,8494/5B 19 HP,8494B-8495B 19 HP,8495B 19 HP,8495D 19 HP,8648D 14 HP,8648D-1E5 14 HP,8753D 16 HP,8903B 18 HP,E4418B-001 18 HP,E9300A 18 HP,E9300B 18 HP,ESG-D4000A 14 HIGH VOLTAGE INC HIV,PFT1003 33 HIV,PFT503 33 HILTI HIL,PS1000 60 HIL,PS20 60 HIL,PS200 FERROSCAN 60 HIL,PS38 60 HIL,TESTER4 54 HIOKI HIO,3169-21 CT500AMP 28 HIO,3169-21CLAMPONPT 30 HIO,3169-21CT1000AMP 28 HIO,3196-PQA 30 HIO,3196PQA-CT1000A 30 HIO,3197PQA 30 HIO,3198 31 HIO,3283 24 HIO,3284 31 HIO,3285 31 HIO,3290 31 HIO,3404 41 HIO,3423 68 HIO,3455HVIT-5KV 32 HIO,3551BATTERYTEST 36 HIO,3641-20 48 HIO,3641-20-KIT 48 HIO,8421-01 48 HIO,8421-51 48 HIO,8422-51 48 HIO,8835-HD520 46 HIO,8841 46 HIO,8842 46 HIO,8860 46 HIO,8870-20 46 HIO,8938 46 HIO,9306 46 HIO,9320 46 HIO,9321 46 HIO,9322-KIT 48 HIO,9335 46 HIO,9660CT100A 31 HIO,9661 CCT-500A 31 HIO,9661-01 CCT-500A 32 HIO,9667-FCT-5000A 32 HIO,9669-CCT-1000A 32 HIO,9694CT5A 32 HIO,9725 46 HIO,LCR 3532-50 10 HIPOTRONICS HIP,880PL 33 HOLADAY INSTRUMENTS (USA) HOL,HI-3604 11 HOL,HI-3627 11 HUBER & SUHNER SUH,SUCOFLEX-104PE 19 HV DIAGNOSTICS HVD,HVA TD60 33 HVD,HVA30-DC/VLF 33 HVD,HVA60-DC/VLF 33 HVD,HVA90_DC-VLF 34 HYDRAMOTION LTD UK HYL,V700S-21 69 HYDROLAB HYD,MS5 67 HYDROLOGICAL SERVICES HYS,OSSB1 69 IFR IFR,2945B 16 IFR,3500A 18 IkeGPS IKE,300PRO 62 INTERNATIONAL LIGHT ILI,1400ABC 68 ION SCIENCE ION,GASCHECK3000 63 ION,GASCHECKG3 63 ISCO ISCO,6712 67 JACOBS RADIO JRC,NJJ-95B 60 JDSU JDSU,ANT5-STM16 21 JDSU,ANT5-STM4 21 JDSU,CSC-ETHERTR-PC 21 JDSU,EDT-135 21 JDSU,FIBER_INSPECT 23 JDSU,MTS-4000-FCOMP 23 JDSU,OLA-55 22 JDSU,OLP-55 22 JDSU,OLS-55 22 JDSU,SMARTCLASS 22 JDSU,SMARTCLASS-E1-D 22 JDSU,SMARTCLASS-ETH 21 JOFFRA JOF,CTC-1200A 45 JOF,CTC-650A 45 JOF,DPC-1000-NATA 45 KINGFISHER KIN,KI28010_2600 22 KIN,KI78010-7600 22 KIN,KI7822B-7600A 22 KONICA-MINOLTA MIN,CL-200 68 KRAUTKRAMER GMBH & CO KRA,DYNAPOCKET 52 KYORITSU ELECTRIC KIK,TOS-5101 32 LAPLACE LAP,SA1000 12 LINEAR LIN,LSPC-1 55 MADGE TECH INCORPORATION MAD,ULTRASHOCK-EB 55 MARCONI MAR,6910 18 MAR,6912 18 MAR,6913 18 MAR,6920 18 MAR,6923 18 MAR,6970 18 MAR,PSCI424-585 24 MCE LASERS MCE,LS140G 42 MECMESIN MEC,AFG-1000NALC 54 MEC,TW60 54 MEGGER MEG,CAL300 34 MEG,DET2/2 25 MEG,DET20C 25 MEG,DET4TC2 25 MEG,DLRO10 27 MEG,DLRO-100LEAD 27 MEG,DLRO10X 27 MEG,DLRO200 27 MEG,DLRO600 27 MEG,DLRO-LEADSET 27 MEG,IDAX300 34 MEG,MIT1020-10KV DIT 33 MEG,MIT1025 33 MEG,MIT525 33 MEG,MOM2 27 MEG,MPP1002-FAULT PP 24 MEG,MTO330 34 MEG,OTS80PB 34 MEG,RCDT330 25 MEG,S1-1052 10KV-DIT 33 MEG,S1-552 5KVDIT 33 MEG,TDR2000/2RM 24 MEG,TM1760 34 MEG,TTR320-47 34 PRO,TORKEL-840 36 PRO,TXL870 36 MEL MEL,M5-200 54 METREL MET,IT3017INSTALTEST 25 METRIX MET,MX2040 31 MONARCH INSTRUMENTS MON,PALMSTROBE 41 MON,PHASER 41 MON,PLT200-KIT 41 MORITEX MOR,PALMSCOPE 41 MULTIAMP MUL,MS-2 35 NARDA NAR,8217 66 NAR,NBM-520 12 NAR,NBM-550 12 NAR,RADMAN 67 NOVATECH NOV,1637-5 50 NTI AUDIO NTI,NT-DAS 66 NTI,XL2+M2210 66 OLDHAM OLD,MX21-SO2 63 OLSON INSTRUMENTS INC OLS,CTG 60 OLYMPUS OLY,38DL 52 OLY,D790-SM 52 OLY,EPOCH600 52 OLY,IPLEX-LT 3.5 41 OLY,IPLEX-LT 7.5 41 OLY,IPLEX-LX 41 OLY,IPLEX-MXII 41 OLY,ISPEEDLT 41 PAN,26MG 52 OMICRON OMI,CMA156-6PCA 35 OMI,CMC256-6 35 OMI,CMC256PLUS 36 OMI,CMC356 36 OMI,CMC356_61850 36 Manufacturers Index cont’d. 6
  • 9. OMI,CMGPS 36 OMI,CPC100PTS 35 OMI,CPCB2 35 OMI,CPCU1 35 OMI,C-PROBE1 36 OMI,CPSB1 35 OMI,CPSTEP 35 OMI,CP-TD1 35 OMI,CTANALYZER 34 OMI,FRA 34 OTT OTT,KL010-150 67 PANAMETRICS PAN,C-LP-40NM 50 PAN,C-PT-10HB 50 PAN,GC-RL302 49 PAN,GC-RL319 49 PAN,OKS 50 PAN,PM880 65 PAN,PT878 49 PAN,PT878E 50 PAN,PT878GC-01 49 PAN,PT878T 50 PCW PCW,DC30 52 PCW,P40-PULSE 52 PETROSENSE PET,PHA-100 63 PHANTOM PHA,53550 56 PHENIX TECHNOLOGIES PHE,BK130 34 PHOTOVAC PHO,2020PRO 63 PHYNIX GMBH & CO PHY,SURFIX FN 54 POLYSONICS POL,HYDRA-SX30-2 50 PPM TECHNOLOGIES PPM,FORM400 63 PROCEQ PRO,2000-ND 60 PRO,EQUOTIP 52 PRO,PROFOSCOPE 60 PRO,RESIPOD 60 PRO,SIL-UN 60 PROFOUND PRO,VIBRA 55 PRO,VIBRA-PLUS 56 PROGRAMMA ELECTRIC AB (Sweden) PRO,SVERKER760 36 PROMAX PRO,HD RANGER 11 PRO,PRODIG-5 11 PROTIMETER PRO,MMS-PLUS 60 PRO,SM 62 PRUFTECHNIK PRU,AL12.116 42 PRU,ROT-PROEX 42 PRU,ROT-ULTRA 42 QUEST QUE,2400 66 RAE SYSTEMS RAE,MR2000 63 RAE,MR3000 64 RF SYSTEMS LAB RFS,VJ-ADV 41 RH SYSTEMS RH,973-SF6 64 RION RIO,NL-04 66 RIO,NL-32RTA 66 RIO,NL-32RTA-NATA 66 RIO,NL52EX-NX42RT 66 RIO,VA-10 56 RIO,VA-11 56 RIO,VA-12 56 RISER BOND RB,1205T-OSP 24 ROHDE & SCHWARZ RS,FSH3-TG 16 RS,FSH3-TG-V 16 RS,NRT 18 ROTOTHERM ROT,C105 45 SCHAFFNER SFN,438 12 SFN,MODULA 6100 12 SEVERN SCIENCES SEV,TORTUSII 67 SEWARD SEW,PAC3760 25 SEW,PT-300 25 SEW,XE3760PKIT+ 25 SHORTRIDGE SHO,ADM-860 58 SI PRESSURE INSTRUMENTS SI,PC6-20-NATA 45 SI,PC6-35-NATA 45 SI,PC6-700-NATA 45 SMC SMC,PTE-100-C 35 SOFTING SOF,PROFIBUS-4 44 SONICLEAN SON,2000HT 50 SORESEN SOR,DCS150-20E 10 SOR,DCS60-50 10 SVANTEK SVA,SV100 56 T&R TEST EQUIPMENT T&R,200A3PHEDIT 35 T&R,CIT 35 T&R,PCU1-SP NLU5000A 35 TEKTRONIX TEK,P6015 10 TEK,TDS3054 8 TEK,THS730A 10 TEK,TPS2014 10 TELWAVE ANT,DIRECTIONAL YAGI 19 TESTO TES,175-H1 48 TES,177-H1 48 TES,177-T4 48 TES,319 61 TES,335 50 TES,350XL 50 TES,445 58 TES,635-2 65 TES,645-1 65 TES,845 39 TEXCEL TEX,ATM 56 TOPCON TOP,BM-9-2 68 TOP,IM-2D-NATA 68 TOUR & ANDERSON TA,CBI 59 TA,SCOPE 59 TPS TPS,90FL-T 67 TPS,WP-80 67 TPS,WP-80M 67 TPS,WP82 67 TPS,WP-84 68 TPS,WP-88 68 TR TR,12V-BAT-CIG 10 TR,RF-CONN 19 TR,VIBLOG 56 TRIO KENWOOD TRI,PD35-20 10 TSI TSI,7565 65 TSI,8324 58 TSI,8373 58 TSI,8375 58 TSI,8386A 59 TSI,8520 64 TSI,8520-1 64 TSI,8525 64 TSI,8530 64 TSI,8530-ENC 64 TSI,8530-ENC-S 64 TSI,8533 64 TSI,8554 65 TSI,8705 59 TSI,8710 59 TSI,9535 59 TSI,9555 59 TSI,9565A 59 TSI,AM510 65 TSI,TA465A 59 UE SYSTEMS INC ULT,UP100KT 61 UNIDATA UNI,6526B-21LCD 69 UNIMEASURE UNI,P75-3C 32 UNIVERSAL TECHNIC UNI,P75-3C HYBRID-DP 32 USRADAR USR,SEEK-SPR 61 VAISALA VAI,WAA151 59 VAI,WXT520-KIT 68 VAN ESSEN VAN,DI502 68 VARIAC VAR,6500-3 36 VEEX VEE,TX-130+ 22 VEE,TX-130E+ 22 VEEX,TX-130M+ 22 VEHICLE COUNTS VEH,PC2500 56 VERMASON VER,222ES 8 VIVAX VIV,VCAM-120M 61 VIV,VCAM-60M 61 VIV,VLOCPRO 61 WEINSCHEL WEI,33-10-34 19 WEI,34-30-34 19 WEI,WKL-100-40 50 WIKA WIK,GA-15 64 WOHLER WOH,VIS2000PRO 62 WOH,VIS340 62 WOH,VIS340-PT 62 WYLER WYL,CL45 54 WYL,PORTAPAINT 54 XANTREX XAN,XFR600-4 10 X-RITE XRI,SP60 69 YOKOGAWA YEW,51001-NATA 68 YEW,DR130 46 Manufacturers Index cont’d. 7
  • 10. 8 Electronics Multimeters & Electrometers Digital Storage Oscilloscopes Probes & Accessories Function Generators LCR Meters DC Power Supplies & Loads Spectrum Analysers - Low Frequency TV Test Equipment Electronic Calibrators Gauss/Tesla Meters E & H Field Strength Meters EMC & Power Disturbance Simulators See also Electrical Testers on page 24 Fluke 28II EX Intrinsically Safe True-RMS Multimeter FLU,28II-EX AU Intrinsically Safe Multimeter is a completely sealed IP67 rated case. For use inside and outside of hazardous zones. Measures up to 1000V, 10A AC and DC with true-RMS for accurate measurement on nonlinear signals. Frequency measurements to 200 kHz, resistance, conductance, diode test, capacitance, and temperature. Results are displayed on the bright, 4-1/2 digit LCD (20,000 counts). Fluke 87-5 Industrial True-RMS Multimeter with Thermometer FLU,87-5 MY Unique function for accurate voltage and frequency measurements on adjusatable speed motor drives and other electrically noisy equipment.True-RMS AC voltage and current for accurate measurements on non linear signals. Built in thermometer. Measure up to 1,000VAC and DC. Measure up to 10A (20A for 30 seconds). 10,000uF capacitance range. Frequency to 200kHz and % duty cycle. Peak capture to record transients as fast as 250μs. 4½ digit mode. Fluke 289 True-RMS Logging Multimeter with FlukeView Software FLU,289 FLUKEVIEW (1209) AU Complete with a built-in data logger to record measurements unattended. Internal memory allows stand-alone logging for up to 180 hours. True-RMS 50,000-count ¼ VGA dot matrix display. 0.025% Basic DC accuracy. CAT III 1000 V/CAT IV 600 V safety rated. Supplied with FlukeView software and download cable. See also Data Loggers on page 47-48 Agilent/HP 34401A Digital Multimeter HP,34401A (1200) AU Precision 6½ digit multimeter. 100nV sensitivity on DC 120mV range. Max DC input 1kV. Measures AC voltage, DC & AC current to 3A, 2 or 4 wire resistance to 120MΩ, period & frequency. Max reading rate 1,000/s. Maths functions including limits test. 512 point storage. RS232 & HPIB interfaces. Vermason 222541 Electrostatic Meter VER,222ES (1246) AU Electrostatic meter for periodic audits of facilities, monitoring packaging, materials, machines and other electrostatic generative equipment or processes. This precision field meter is designed to measure electrostatic voltage potentials over selected distances from 1 to 20cm. Range at the standard distance of 2cm is 20kV. Two range 3 digit display in V or kV. Digital Storage Oscilloscopes Agilent DSOX3024A Oscilloscope 200MHz 4 Channels AGI,DSOX3024A (1350) AU 4 channel 200MHz digital storage oscilloscope. Sampling rate 2 G/s (4 G/s half-channel interleaved mode). 2Mpts memory depth, waveform update rate 1 million waveforms/s, sensitivity 1mV/div to 5V/div and 16 digital channels. Built-in 20 MHz function/arbitrary waveform generator. Pass/fail masks can be automatically created based on an input reference waveform or on a PC then imported via USB, also store and remove waveforms via USB. Agilent MSOX3024A 200MHz Scope 4+16Ch with Logic Analyser AGI,MSOX3024A (1340) AU Mixed signal oscilloscope. 4 analogue and 16 digital channels 200MHz bandwidth, 4Gsa/s, 2Mpts memory, 1M/s waveform update rate. Search and navigate capability. Integrated time-aligned digital and analog signal viewing. USB storage, LAN operability. Agilent MSO6104A 1GHz Digital Oscilloscope with Logic AGI,MSO6104A (1320) AU 1GHz 4 + 16 channel mixed signal oscilloscope (MSO). 4Gsa/s. XGA Colour display updates 100,000 waveforms/s with 256 levels intensity. 4 analogue channels & 16 logic channels. Deep memory. 8 digit frequency counter function. Triggering includes video, HDTV, I2C, SPI, LIN, CAN, & USB. FFT analysis included. LAN, USB, GPIB, & XGA interfaces standard. Fluke 199C Scopemeter 200MHz Hand-held FLU,199C-SCOPEMETER (1360) AU 200MHz bandwidth 2 channel colour digital oscilloscope withDMMfeature.14.4cmcolourdisplaywithpersistence feature. 2.5GS/s real time sampling. Input sensitivity 5mV/div to 100V/div. Glitch capture 3ns using pulse width triggering. Timebase range in scope mode 5ns/ div to 2min/div. Trigger types auto, free run, single shot, edge, delay, video, video line, selectable pulse width and external. Automatic capture and replay of last 100 screens. Measures electrical power properties such as VA VAR, etc. Isolated inputs. Tektronix TDS3054B 500MHz 4 Channel DSO TEK,TDS3054 MY Sampling rate 5GS/s. Memory length 10k. Sensitivity 1mV to 10v/div. Time base 1ns to 10s/div. Trigger functions include video. Extensive automatic waveform measurements. Including FFT, TV trigger, advanced analysis (TDS3AAM), and limit testing (TDS3LIM). Battery operation. Multimeters & ElectrometersTe Multimeters & Electrometers cont’d. www.techrentals.com.au
  • 11. 99 For all your Agilent rental equipment, contact TechRentals
  • 12. 10 Function Generators cont’d. Agilent/HP 33250A 80MHz Function/ Arbitrary Waveform Generator HP,33250A (1618) AU Frequency range 80MHz sine & square waveforms. 50MHz pulse waveforms with variable rise/fall times. 25MHz arbitrary waveforms, 1MHz triangle & ramp waveforms. White noise to 50MHz. Output into 50Ω 10mVpp to 10Vpp. AM, FM, FSK, & burst modulation. Intuilink software for programming arbitrary waveforms. HPIB & RS232C interfaces. LCR Meters Hioki 3532-50 5MHz LCR Meter HIO,LCR 3532-50 (1290) AU Frequency range 42Hz to 5MHz. 5ms high speed measurements. Basic accuracy of ±0.08%. Memory for 30 sets of measurement conditions, including comparator values. Includes correlation correction function, interactive touch panel operation and enlarged display function. Applications include laboratory use for evaluation of operating characteristics, production line use or R&D. Measurement data captured by a personal computer can be displayed graphically by using standard spreadsheet software. DC Power Supplies & Loads Agilent/HP 6675A DC Power Supply HP,6675A MY 102VDC, 18A, 2000W, auto-parallel up to five units, output can be connected in series, programmable over-voltage and over-current protection, over-temperature protection, Discrete Fault Indicator/Remote Inhibit (DFI/RI), self-test occurs at power-on from an GPIB command, user definable power-on state and VXI plug & play drives. Sorensen DCS 150V, 20A DC Power Supply SOR,DCS150-20E (8130) AU 0-150V, 20A, 3KW. Applications range from manufacturing test and burn-in of automotive components, avionics electronics, telecommunications and consumer products to beam steering, process control, laboratory R&D use. Remote control via LAN or RS232. Sorensen DCS60-50 60V 50A DC Power Supply SOR,DCS60-50 (8140) AU 0 to 60V, 0 to 50A. Max power on a 240V 3ph supply 3kW, 2.5kW on a 1ph 240V supply. On 1ph 50V@50A or 60V@42A. Remote programming. TR Built 12V Battery Supply with Cigarette Power Connector TR,12V-BAT-CIG (8160) AU 12V 20AH battery pack with built-in charger. Has cigarette outlet and banana plug connectors. Trio Kenwood PD35-20 DC Power Supply TRI,PD35-20 (8150) AU Output 0 to 35V, 0 to 20A. Constant current, constant voltage. Multiple parallel or series operation. Remote programming of voltage or current by external voltage or resistance. Xantrex XFR 600-4 600V 4A Power Supply XAN,XFR600-4 (8120) AU 2.4kW programmable DC power supply 0~600V, 0~4A with remote analog programming. Digital Storage Oscilloscopes cont’d. Tektronix THS730A 200MHz Battery DSO TEK,THS730A MY Dual channel battery portable 200MHz digital storage oscilloscope with digital multimeter facilities. Maximum sampling rate 1GS/s. Maximum input 640V rms, maximum float 600V rms. Waveform processing including watts calculations. Video trigger. RS232 interface. Tektronix TPS2014 100MHz 4 Channel Powerscope TEK,TPS2014 (1370) AU Sampling rate 1GS/s. All 4 channels isolated for floating measurements. Sensitivity 2mV to 5V/div. Measurements for current and voltage distortion and their spectral content, harmonics, instantaneous power, power factor and switching loss. Automatic waveform measurements. FFT, power analysis, low & high voltage power probes (P5120). Battery operation. Probes and Accessories Chauvin Arnoux Current Probe E3N 0 to 100 Amp CHA,PROBE-I (1440) AU Current probe for oscilloscopes which uses a Hall effect cell for the measurement of DC or AC current. Measures currents from 50mA to 100A peak. A thumbwheel can be used to reset zero for adaption to the measurement environment. The clamp can be used with any measurement instrument which has a BNC input and an impedance of 1MΩ, <100pF. Fluke 80K-40 High Voltage Probe FLU,80K-40 (1219) AU 1 to 40kVDC or peak AC, 28kVAC RMS. Input resistance 1GΩ, division ratio 1,000:1. Note: input impedance of DVM must be 10MΩ or reading will be wrong. Tektronix P6015 40kV High Voltage Probe TEK,P6015 (1450) AU Bandwidth 75MHz. Input rating: 40kV pulse, 20kVDC plus peak AC. Derating with frequency applies. Input impedance 100MΩ. Attenuation x 1000. Function Generators See also RF Signal & Sweep Generators on page 14 Agilent/HP 33120A 15MHz Function/Arbitrary Generator HP,33120A MY Function/Arbitrary Waveform Generator. Frequency 15MHz sine and square waveforms, and 100kHz triangle and ramp waveforms. Gaussian noise to 10MHz. Output into 50ohms 50mV to 10VP-P. AM, FM, FSK and bust modulation. HP-IB and RS-232C interfaces both standard. Agilent/HP 33220A 20MHz Function/ Arbitrary Generator HP,33220A (1613) AU Frequency range 20MHz sine & square waveforms, 200kHz pulse, triangle, ramp, noise, & DC waveforms. Gaussian noise to 10MHz. Output into 50Ω 10mV to10V P-P. AM, FM, FSK, & burst modulation. Includes option 001 external timebase reference. With optional Benchlink software waveforms can be captured & played back. HPIB, USB, & LAN interfaces. 10 Electronics www.techrentals.com.au
  • 13. 11 Spectrum Analysers - Low Frequency See also Spectrum Analyser - High Frequency on page 14-16 See also Noise & Sound Analysers on page 65 Agilent/HP 35670A 100kHz Spectrum Analyser HP,35670A (2480) AU Quad channel 122μHz to 102.4kHz spectrum analyser. Up to 1600 line resolution. Displays frequency response, power spectrum, linear spectrum, coherence, cross spectrum, power spectral density, and time. Signal sources: Fixed & swept sine, arbitrary waveform, random noise, chirp. Built-in disk drive. HPIB plotter interface. Bandwidth is 102.4, 51.2 and 25.6KHz for single, dual and quad channel measurements respectively. TV Test Equipment See also Network Analysers/Antenna & Cable Test on page 16 Promax HD Ranger DVB-T-S-C TV Analyser PRO,HD RANGER (1726) AU TV analyser that covers DVB-T/C/S/S2 with MPEG-2 as well as MPEG-4 video with an ultra fast spectrum analyser. Applications include TV installation, maintenance and surveillance. 18 cm bright display for use in direct sun light. Constellation diagram available for DVB-T/C/S/S2. Datalogging with the aid of an on-screen wizard. Promax TV Explorer Prodig-5 PRO,PRODIG-5 (1727) AU For the installation, maintenance and surveillance of terrestrial, satellite and cable TV systems. Automatically provides information about the channels available in the network and their quality. Displays analogue and digital channel picture. Includes a high resolution spectrum analyser function and MPEG decoding. Foxtel approved. Electronic Calibrators See also Industrial Process Calibrators on page 42-45 Fluke 5500A Multi Product Calibrator with NATA Calibration FLU,5500A-NATA (1660) AU FLU,5500A MY Calibrator sources direct voltage & current, alternating voltage and current, with multiple waveforms and harmonics, 2 simultaneous voltage outputs or voltage & current. Simulates power with phase control, resistance, capacitance, thermocouples and RTDs. Selectable ranges include the following outputs VDC from 0 to 1.02kV, VAC from 1mV to 1.02kV with output from 10Hz to 500kHz. AC current from 0.01μA to 11A with output from 10Hz to 10kHz. DC current from 0 to 11A. Resistance values from short circuit to 330MΩ. Capacitance values from 330pF to 1,100μF. Temperature t/c B, C, E, J, K, L, N, R, S, T, U, RTD Pt385 100Ω, Pt3926 100Ω, Pt3916 100Ω, Pt385 200Ω, Pt385 500Ω, Pt385 1kΩ, Ni120 120Ω & Cu427 10Ω. Genrad 1433B 1.1MΩ 6 Decade Resistance GR,1433B-NATA (1670) AU Six decades by 1Ω to 1.1MΩ. Accuracy 0.01%. NATA calibrated. Electronic Calibrators cont’d. Genrad 1433F 111KΩ 7 Decade Resistance Box GR,1433F-NATA (1680) AU Seven decades by 0.01Ω to 111k. Accuracy 0.01% +0.002Ω. Useful for platinum resistance thermometer calibration. NATA calibrated. Genrad 1433-20 11.1111kΩ 6 Decade Resistor GR,1433-20 MY Six decades by 0.01Ω per step to 11.1111kΩ. High accuracy 0.01% up to 10MΩ steps. Low temperature coefficient, 5ppm/˚C. Good frequency characteristics, excellent stability (10ppm/yr, 25ppm/3yrs), low zero resistance (1MΩ per decade). May be used for RTD stimulation. Rack mount option. Gauss/Tesla Meters FW Bell Gauss/Tesla Meter BEL,4190 (1969) AU Handheld digital ELF gauss meter. Maintains accuracy regardless of orientation. Applications include detecting magnetic field emissions from overhead AC power lines, video display terminals, office equipment and household appliances. Analogue o/p, data logging, auto range 0.1 to 1999 mG, minimum resolution 0.1mG/.01 uT. FW Bell 5180 Gauss/Tesla Meter BEL,5180 (1960) AU Magnetic measuring equipment, portable gaussmeter. Functions include Auto Zero, Min/Max/Peak Hold, Auto Range and Relative Mode. Displays in Gauss, Tesla or Ampere/Meter. With Hall effect transverse probe. Bandwidth DC to 30kHz, ranges 300G to 30kG, resolution 0.1G. Analogue output (±3V FS) and USB interface. Battery operated. E & H Field Strength Meters See also Radiation Montioring & Protection on page 66 Holaday HI-3604 E & H Survey Meter ELF HOL,HI-3604 (1945) AU Low frequency field meter. Designed to evaluate electric and magnetic fields associated with 50Hz power lines. Frequency range 30 to 2,000Hz. Measures magnetic fields from 0.1 milligauss to 20 gauss. Measures electric fields from 1 volt/meter to 200 kilovolts/meter. LCD display. 127 reading data memory. Holaday HI-3627 Magnetic Field Meter HOL,HI-3627 (1980) AU Three orthogonal field sensors. Dynamic range 0.2mG to 20G. True RMS detection. Frequency range 5Hz to 2kHz with an in-built 30Hz high pass filter. Meets requirements of the Swedish protocol and the IEEE P-1140 protocol. www.techrentals.com.au Electronics
  • 14. 12 EMC & Power Disturbance Simulators Laplace SA1000 EMC Test System LAP,SA1000 (8370) AU Comprises PC controlled spectrum analyser 10kHz to 1.1GHz, SA1020 pre-amplifier, RF200 broadband antenna 30MHz to 1GHz, TTI LISN1600 LISN, and RF100 E-field & H-field probes. Supplied with notebook PC and EMC software. EMC compliance test system. Schaffner 438 30kV Static Discharge Generator SFN,438 (8375) AU Generates an electrostatic charge in a range from 2 to 30kV. This instrument is in a ‘gun’ form. Has a removable discharge network which can be interchanged with other (optional) impedance networks. Performs test to IEC61000-4-2 (AKA, IEC 1000-4-2) standards. Schaffner Modula-6100 Immunity Test System SFN,MODULA 6100 (8380) AU Multifunction generator to simulate electro-magnetic field interference effects for immunity testing in conformity with international, national and in house standards including the new IEC/EN standards. Generates Interference pulses such as burst and surge and power quality simulations. E & H Field Strength Meters cont’d. Narda NBM-520 ‘E’ Field Strength Meter and Probe EF1891 NAR,NBM-520 (1925) AU Field strength meter with EF1891 ‘E’ field probe. Detects electric fields from 3 MHz to 18 GHz, covering fields generated by broadcasting, telecoms, radar and any other transmission sources within this range. Dynamic range from 0.6V/m to 1,000V/m. Applications include measuring field strengths to comply with general safety regulations and actual radiated power. Includes fibre optic cable with optical to electrical converts for remote monitoring. Narda NBM-550 ‘E’ Field Strength Meter and Probe EF1891 NAR,NBM-550 (1930) AU Field strength meter with EF1891 ‘E’ field probe. Detects electric fields from 3 MHz to 18GHz, covering fields generated by broadcasting, telecoms, radar and any other transmission sources within this range. Dynamic range from 0.6V/m to 1,000V/m. Includes GPS, data logging, voice recording annotation and fibre optic cable with optical to electrical converts for remote monitoring. Electronics www.techrentals.com.au TRAINING FROM TECHRENTALS TechRentals, with the support of many manufacturers including Anritsu, Fluke, Agilent, Megger and Omicron, are able to provide tailored training suited for the electrical, networking, instrumentation and construction industries. These partnerships allow TechRentals to work together to offer many types of training from online modules, to partner standard training. Your training requirements can be fully customised, whether it be high-end electrical, telecommunications, fibre optics or NDT testing. When you rent you have access to: • Specific asset training as part of the set up and download service • Online training videos via our website to assist in operation of certain equipment Periodically, TechRentals offer a number of short courses designed to enhance skills and experience in areas of particular benefit to technical personnel. Notices of these courses are sent by email requesting an expression of interest and take place throughout Australia. If you would like to receive these notifications please email training@techrentals.com.au. The TechRentals Wiki is well worth a visit, as this resource centre provides manuals, technical information and how-to videos. Visit www.techrentals.com.au and select Technical Tips and Videos. Don’t forget to visit the TechRentals YouTube site with over 100 videos containing training, practical demonstrations and much more. (http://www.youtube.com/techrentals)
  • 15. 13 Specialists in supplying IT hardware, project management, audio visual turn key solutions and facilitating short and long term projects on everything IT and AV, TR Vidcom delivers unparalleled levels of service and a comprehensive range of leading-edge products at competitive rates. Our product range includes: Our vision at TR Vidcom is to respond to clients’ needs by combining technology, equipment and technical expertise. Get access to our large inventory of leading brands including HP, Apple, Lenovo, Dell, Samsung, Toshiba, Orion, LG and more... Take advantage of our customised solutions and rental periods, and the flexibility to update at any time. Our top technical advice and support is only one phone call away! VC0294 1800 843 266 www.trvidcom.com.au rent@trvidcom.com.au vidcom Originally established in 1983 as the Computer Division of TechRentals, TR Vidcom is Australia’s most vibrant company in the exciting IT and Audio Visual industry. • Notebooks and Desktops • LCD and Plasma Screens • Printers and Plotters • Multi Panel Plasma Displays • Projectors and Screens • Apple Products • Servers and Networking • Video and Teleconferencing • Stocktake Equipment • Rich Media Streaming
  • 16. 14 RF Signal & Sweep Generators Frequency Counters Spectrum Analysers - High Frequency Network Analysers/Antenna & Cable Test Communication Test Sets Distortion Analysers Power Meters - RF RF Amplifiers RF Attenuators Antennas RF Accessories See also Function Generators on page 10 Agilent/HP 8648D-1E5 4GHz Signal Generator HP,8648D (2330) AU HP,8648D-1E5 MY Signal generator 9kHz to 4GHz with AM/ FM/Phase modulation output range from +10 to -136dBm with ±1dB accuracy up to 2.5GHz. 0.001Hz resolution. Complete with option 1E5 high stability timebase (<±0.1ppm/yr). Agilent/HP E4433B ESG-D4000A 4GHz RF Digital Signal Generator HP,ESG-D4000A (2335) AU Signal generator with digital modulation facilities. Frequency range 250kHz to 4GHz, resolution 0.01Hz. AM, FM, phase, and pulse modulation. Wideband AM modulation. Internal modulation and pulse generator to 50kHz. Step sweep of frequency and power. Option 1E5 high stability reference 0.1 ppm/yr included. Frequency Counters See also Electronics on page 8 Agilent/HP 53181A 3GHz Frequency Counter HP,53181A (3112) AU/MY Option 010 high stability timebase included. HPIB interface. PC based Benchlink meter software available. Agilent/HP 5350B 20GHz Frequency Counter HP,5350B MY Microwave frequency counter. 10Hz to 20GHz. HPIB interface. Spectrum Analysers - High Frequency Advantest 31.8GHz Portable Spectrum Analyser ADV,U3771 (2540) AU/MY Portable 9kHz to 31.8GHz spectrum analyser. 3 way power. Battery, 240V & DC. RBW 100Hz to 3MHz, sensitivity -117dBm@34GHz (typ). High-stability reference. Includes a wide variety of data analysis functions & zoom function. With signals applied to both Input 1 and Input 2, two signals such as an IF signal and a carrier can be measured. Support for USB for printer and memory. Storage image formats: PNG, BMP, configuration file BIN, XML. Agilent N9340A 3GHz Spectrum Analyser with Tracking Generator AGI,N9340A (2565) AU Portable handheld spectrum analyser with a frequency range from 100kHz to 3GHz. Resolution bandwidth 30Hz to 1MHz. Includes tracking generator. DANL -126dBm (typical). Sweep time 10ms. USB connectivity allows for PC control and data transfer. Agilent N9344C 20GHz Spectrum Analyser with Tracking Generator AGI,N9344C (2538) AU AGI,N9344C-TG MY Spectrum analyser 9kHz to 20GHz with 5MHz to 7GHz tracking generator. -144dBm displayed average noise level (DANL), <0.95s sweep time for 20GHz full span. Average continuous power, +30dBm for 3 minutes maximum. Flexible remote control via USB/LAN. User memory 64MB, able to store approximately 14,000 traces. Airmagnet Wi-Fi Spectrum Analyser AIR,AIRMAG SPEC AN (2580) AU Laptopbasedspectrumanalyser. Specificallyidentifysourcesofinterference in Wi-Fi bands 2.4-2.5GHz (802.11 b/g) and 4.9-5.9GHz (802.11a), and track them to their physical source. Automatic and real time identification of Bluetooth, cordless phones, microwaves, analogue video cameras, RF jammers and more. Immediately “see” and name each device. Anritsu MS2711A 3GHz Portable Spectrum Analyser ANR,MS2711A MY Portable spectrum analyser, 9kHz to 3GHz. Light weight battery powered spectrum analyser with LCD. Resolution bandwidth down to 10kHz. Suitable for cellular telephone walk or drive tests to determine coverage and base station positioning. Can also be used for VHF/UHF signal surveying. N type connector. Anritsu MS2712E 4GHz Spectrum Analyser/Tracking Generator ANR,MS2712E (2560) AU Portable handheld spectrum analyser 9kHz to 4GHz, DANL -162dBm in 1Hz RBW, RBW 1Hz to 3MHz. Tracking generator -50dBm to 0dBm in 0.1dB steps. Applications include, spectrum monitoring, broadcast proofing, RF and microwave measurements, Wi-Fi and wireless network measurements. Store up 2,000 traces and setups on board or on USB flash drive. One-button envelope creation, Trace Save-on-Event feature. RF Signal & Sweep Generators Radio Frequency www.techrentals.com.au Stay informed on T&M news, application notes and case studies with @TechRentals on Twitter
  • 17. 16 Spectrum Analysers - High Frequency cont’d. Anritsu MS2721A 7.1 GHz Spectrum Analyser ANR,MS2721A (2550) AU 100kHz to 7.1GHz. For deploying, maintaining and troubleshooting wireless base stations and Wi-Fi (802.11a, b and g) systems, and general spectrum analysis. Smart measurements include channel power, adjacent channel power ratio, carrier to interference ratio and field strength. AM/FM/SSB demodulator included and internal speaker for monitoring. DANL -153 dBm at 1GHz. Phase noise -100dBc/ Hz at 10KHz. Store unlimited traces and setups. Remote programming via Ethernet port. Rohde & Schwarz FSH3 3GHz Spectrum Analyser/ Tracking Generator/Vector Measurement RS,FSH3-TG-V (2575) AU RS,FSH3-TG MY Handheld portable battery operated spectrum analyser 100kHz to 3GHz. Resolution bandwidth 1kHz to 1MHz. Less than -105dBm noise level (-114dBm typical). Suitable for RF surveying applications. Includes vector transmission and tracking generator options. Network Analysers/Antenna & Cable Test Anritsu S331D 4GHz Colour Sitemaster Antenna ANR,S331D (2185) AU/MY Antenna and cable test set. Frequency range 25MHz to 4GHz. Measures return loss, SWR, cable loss, and distance to fault. Return loss range 0 to 60dB. SWR range 1 to 65. Distance to fault range 1,197m. Insertion loss range -120 to +100dB. Cable loss range (oneport)0to30dB. N(f)Typeport. Analysissoftwarediscsincludedcontaining distance to fault and Smith chart tools. Complete with calibration standard, AC/DC adaptor, and 12VDC car cigarette lighter adaptor. Anritsu S331E 4GHz Sitemaster Cable & Antenna Tester ANR,S331E (2180) AU/MY Cable and antenna analyser, frequency range 2MHz to 4GHz. Measures return loss, VSWR, cable loss, and Distance To Fault. Suitable for legacy networks in addition to the new 3G and 4G networks being installed. Applications include cable & antenna installation and maintenance for wireless service providers, contractors, military, aerospace, defence, and public safety applications. Anritsu S332D Colour Sitemaster Antenna Tester ANR,S332D MY Antenna and cable test set including spectrum analyser. Frequency range 25 to 4,000MHz. RBW 100Hz to 1MHz. Measures return loss, SWR, cable loss, and distance to fault. N(f) Type port. Analysis software containing DTF and Smith chart tools included. Complete with calibration standard, AC/DC adaptor, and 12VDC car adaptor. Network Analysers/Antenna & Cable Test cont’d. Anritsu S332E Sitemaster including Spectrum Analyser ANR,S332E (2175) AU Antenna and cable analyser 2MHz to 4GHz and spectrum analyser 100KHz to 4GHz. DANL -152dBm. Measures return loss, VSWR, cable loss, and distance to fault. N(f) Type port. Analysis software containing DTF and Smith chart tools included. Complete with calibration standard, AC/DC adaptor, and 12VDC car adaptor. Cable & antenna installation and maintenance for wireless service providers, contractors, military, aerospace and defence, and public safety applications. Anritsu S332E Sitemaster Including Spectrum Analyser and Opt 431,31,509 ANR,S332E-CMPA-MOD (2165) AU antenna and cable analyser 2MHz to 4GHz and spectrum analyser 100KHz to 4GHz. DANL -152dBm. Options included, indoor outdoor Coverage Mapping, GPS Receiver and AM/FM/PM Analyser. Measures return loss, VSWR, cable loss, and distance to fault. Analysis software containing DTF and Smith chart tools included. Cable, antenna, installation and maintenance spectrum analysis, coverage mapping and AM/FM/PM demod for wireless service providers, contractors, military, aerospace and defence, and public safety applications. Anritsu S820D Microwave Sitemaster 25MHz to 20GHz ANR,S820D (2150) AU/MY Microwave antenna and cable test set. Portable single port analyser, providing return loss (SWR) insertion loss and distance to fault measurements in the frequency range of 25MHz to 20GHz. Unit comes standard with RS232 interface, Smith chart and software management tools, AC/DC and automotive adaptor. A comprehensive range of precision waveguide components and adaptors are available. Anritsu Sitemaster Waveguide Components ANR,WAVEGUIDE-ADAP (2190) AU/MY Calibration components and wave guide to co-ax adaptors for Anritsu S820x Sitemaster. Set includes 1/8 and 3/8 shorts, termination, and waveguide to co-ax adaptor. Agilent/HP 8753D 6 GHz Vector Network Analyser HP,8753D (2745) AU Two port vector network analyser with integral S-parameter test set. Frequency range 30 kHz to 6 GHz with included option 006. In-built 1Hz resolution synthesized signal source. Calibration kit included. Communication Test Sets Aeroflex IFR 2945B Communications Service Monitor IFR,2945B (2368) AU Communications Service Monitor is ideally suited to the testing of two way radios and trunking repeaters allowing verification of performance, and rapid diagnosis of faults. Includes a combination of test instruments such as a full performance spectrum analyser, oscilloscope and tracking generator. Frequency range 400kHz to 1.05GHz. Radio Frequency www.techrentals.com.au
  • 18. 17 BR0256 Get your FREE Sepura TETRA two way radio demo! To book your free demonstration, call our friendly team today on 1800 222 327, or email us at rent@trhirecom.com.au Melbourne | Sydney | Newcastle | Brisbane | Townsville | Adelaide | Darwin | Perth TR Hirecom is offering FREE demonstrations of the Sepura range of TETRA radios from our diverse fleet. Your free demo will include:  Comprehensive Site Test  Demonstration of TETRA Repeaters and TETRA Radios  Educational TETRA White Paper  A clear understanding of what a TETRA System can achieve for your organisation Sepura STP9000 TETRA Digital Hand Held Portable Two Way Radio • Large colour screen • 1.8 W RF power • Full keypad • Dustproof, waterproof and submersible IP67 rating • Integrated Bluetooth option • GPS capability • Robust and secure • Integrated RFID tag Sepura STP9200 TETRA Digital Hand Held Portable Two Way Radio • 1.8 W RF power • Monochrome screen • Enhanced and intuitive user interface • Dustproof, waterproof and submersible IP67 rating • Integrated RFID tag • GPS capability Sepura STP9100 TETRA Digital Hand Portable Two Way Radio • 1.8 W RF power • Large colour screen • Dustproof, waterproof and submersible IP67 rating • Integrated Bluetooth option • GPS capability • Robust and secure • Integrated RFID tag Sepura STP8X IS TETRA Digital Hand Held Portable Two Way Radio • Full, tactile keypad • IP67 Rating • V6 IECEx/ATEX approval • Loud and clear audio • Man down alarm • GPS option • Bluetooth connectivity • Intrinsically Safe • MicroSD card slot hirecom Call to arrange your FREE demo 1800 222 327
  • 19. 18 Power Meters - RF cont’d. Marconi 6970 Digital Power Meter MAR,6970 MY NiCd battery operated with digital display. Complete with AC adaptor. Requires sensor. Sensors available for 10MHz to 26.5GHz frequency range. Marconi 6910 Power Sensor MAR,6910 MY Frequency range 10MHz to 20GHz. Power range -30dBm to 20dBm (1μW to 100mW). Max RF i/p 25dBm (300mW) CW 42dBm (15W) peak for 2μs. Sensing element semiconductor thermocouple. VSWR 1.25: 10MHz to 30MHz, 1.1: 30MHz to 2GHz, 1.18: 2 to 16GHz, 1.28: 16 to 18GHz, 1.4: typical 18 to 20GHz. Linearity factor provided with sensor. Accuracy ±0.5% at 25˚C between 10 & 20dBm. Improves by a factor of 10 for each lower range. Calibration factor provided with sensor. Accuracy uncertainty provided with sensor. Resolution 0.01%. RF connector precision N-type (M) 50Ω. Marconi 6912 Power Sensor MAR,6912 MY Frequency range 30kHz to 4.2GHz. Power range 30dBm (1μW) to 20dBm (100mW). Marconi 6913 Power Sensor MAR,6913 MY Frequency range 10MHz to 26.5GHz. Power range 30dBm (1μW) to 20dBm (100mW). Max 25dBm (300mW) CW, 42dBm (15W) peak for 2μs. Sensing element semiconductor thermocouple. VSWR 1.40: 10MHz to 50MHz, 1.15: 50MHz to 100MHz, 1.10: 100MHz to 2GHz, 1.15: 2 to 12.4GHz, 1.20: 12.4 to 18GHz, 1.25: 18 to 26.5GHz. Calibration factor provided at 1GHz intervals (500MHz intervals above 20GHz) with each sensor. Accuracy uncertainty provided with each sensor. Resolution 0.01%. Linearity factor accuracy ±0.5% at 100mW, decreasing by 0.005% per 1mW. Marconi 6920 Power Sensor MAR,6920 MY High sensitivity diode sensor. Frequency range 10MHz to 20GHz. Power range -70dBm (0.1nW) to -20dBm (10μW), max 26dBm (400mW) CW +30dBm (1W) peak for 2μs. Sensing element Shottky barrier diode. VSWR 1.4 to 1.2:10 to 40MHz, 1.20:40MHz to 10GHz, 1.35:10 to 18GHz, 1.40 typical 18 to 20GHz. Calibration factor provided at 1GHz intervals with each sensor. Accuracy uncertainty provided with each sensor. Marconi 6923 RF Power Sensor MAR,6923 MY High sensitivity diode sensor. Frequency range 10MHz to 26.5GHz. Power range -65dBm (0.3nW) to -20dBm(10μW), max 26dBm (400mW) CW, +30dBm (1W) peak for 2μs. Sensing element Shottky barrier diode. VSWR 1.4 10 to 40MHz, 1.15 40 to 100MHz, 1.12 0.1MHz, 1.17 2 to 8GHz, 1.30 8 to 18GHz, 1.50 typical 18 to 26.5GHz. Calibration factor provided at 1GHz intervals with each sensor. Accuracy uncertainty provided with each sensor. Resolution 0.01%. Linearity factor provided with each sensor. Accuracy ±1% between -30 to -20dBm. RF connector type N (M) precision 50Ω. Rohde & Schwarz NRT Power Reflection Meter RS,NRT (2140) AU Measures directional power forward and reverse under operational conditions. NRT-Z44 sensor included, range 3 mW to 120 W, 200 MHz to 4 GHz. Measurement method is compatible with all common analog and in particular digital modulation standards. GSM/EDGE, 3GPP (W-/TD-CDMA), CDMA (IS-95), CDMA2000, PHS, NADC, PDC, TETRA, DECT, DAB, DVB-T and many more. Communication Test Sets cont’d. Aeroflex IFR 3500A Radio Communications Test Set IFR,3500A (2360) AU Communications service monitor. Portable radio test set for AM, FM, P25, DMR and NXDN radio transceivers, antenna and cable testing in vehicle, at remote locations or on bench testing. Frequency range 2M to 1GHz. 20W power handling without external attenuator. Includes spectrum analyser, oscilloscope, tracking generator and 75W 6dB attenuator. Distortion Analysers Agilent/HP 8903B Audio Analyser HP,8903B (3020) AU Audio analyser for communications and other applications. Measures distortion, sinad, signal-to-noise, ACV, DCV, frequency. Low distortion programmable sine wave source. Frequency range 20Hz to 100kHz. Optional 400Hz high pass and CCITT weighting filters fitted. Power Meters - RF Agilent/HP E4418B E Series Power Meter HP,E4418B-001 (2120) AU 100μW to 25W (-70dBm to 44dBm), 9 kHz to 110 GHz (power sensor dependent ), 4 digit display - watts, dBm, dB (rel). Battery or mains powered. Power sensor required, select and specify when ordering. Agilent/HP E9300A Power Sensor 1μW to 100mW, 10MHz to 18GHz HP,E9300A (2125) AU Power sensor for HP EPM series power meters. E-series average power sensor. 10MHz to 8GHz, 1μW to 100mW (-60dBm to 20dBm). Agilent/HP E9300B Power Sensor 1μW to 25W, 10MHz to 8GHz HP,E9300B (2135) AU Power sensor for HP EPM series power meters. E-series average power sensor. 10MHz to 18GHz, 1μW to 25W (-30dBm to 44dBm). Anritsu MA24104A Inline Power Sensor 0.6 to 4GHz, 2mW to 150W ANR,MA24104A (2115) AU A dual path architecture that enables true RMS measurements over the entire frequency and dynamic range allowing users to measure CW, multi-tone and digitally modulated signals such as GSM/EDGE, CDMA/ EV-DO,WCDMA/HSDPA, WiMAX, and TD-SCDMA. Can be connected directly to a laptop or Site Master with option 19. Bird 43 Power Meter BIR,43 MY RF thruline power meter. Requires Bird element of specified frequency and power. Measures forward and reflected power by reversing the element. Bird RF Element BIR,ELEMENT-LF MY BIR,ELEMENT-HF MY RF elements for Bird watt meters. Available in various power and frequency ranges. Radio Frequency www.techrentals.com.au
  • 20. 19 RF Amplifiers ENI 604L 4W Wideband 1GHz RF Amplifier ENI,604L (2803) AU Linear wideband RF power amplifier. 4W output at an input of 0.13mW from 0.5 to 1GHz. Saturated output 7W 0dBm input. Extended performance gives saturated output to a max of 16W at 10MHz and 12W at 100MHz typically. Agilent/HP HP8449B Preamplifier 1GHz to 26.5GHz HP,8449B MY High-gain (+30dB gain), low-noise preamplifier. Frequency range of 1 to 26.5GHz. Increases sensitivity of any microwave spectrum analyser for detection and analysis of very low-level signals. Improved sensitivity can reduce measurement time. RF Attenuators Agilent/HP 8494B/8495B Attenuator Set 81dB, 1 & 10dB steps 18GHz HP,8494B-8495B (2904) AU/MY Coaxial step attenuator set. DC to 18GHz. 0-11dB in 1dB steps and 10-70dB in 10dB steps. Type N(f) connectors. Comprises a connected set of types 8494B and 8495B with 11716A rigid interconnect kit. Agilent/HP 8495B 70dB x 10dB Coaxial Step Attenuator HP,8495B (2902) AU DC to 18GHz. 0 to 70dB in 10dB steps. Agilent/HP 8494/5B Coaxial Step Attenuator Set 81dB x 1dB HP,8494/5B MY DC to 18GHz. 0 to 11dB in 1dB steps. 11 to 81dB in 10dB steps. Comprises a connected set of types 8494B & 8495B. Type N(f) connectors. Agilent/HP 8495D 70dB 26.5GHz Step Attenuator HP,8495D (2905) MY Frequency range DC to 26.5GHz. 70dB step attenuator in 10dB steps. Max continuous power 1W. 3.5mm connectors. Anritsu Attenuator 50W 30dB DC to 18GHz ANR,50-30-18 (2903) AU 30dB, 18GHz, 50W. N Type connectors. Weinschell 33-10-34 25W 10dB 8.5GHz RF Attenuator WEI,33-10-34 (2919) AU DC to 8GHz, 10dB, 25W. Type N connectors. Weinschell 34-30-34 25W 30dB 4GHz RF Attenuator WEI,34-30-34 (2922) AU DC to 4GHz, 30dB, 25W. Type N connectors. Antennas Advantest TR1720 100kHz to 30MHz Antenna ADV,TR1720 (1847) AU Loop and vertical antenna system. Frequency range 100kHz to 30MHz. Suitable for use with ADV,R4131D for field strength and EMI measurements. An antenna tuner is included which can be used as an input/output filter to reject noise below the measuring frequency. AH Systems 300MHz to 12GHz Antenna System AH,ANTENNA (1834) AU Log periodic antenna system. Comprises two antennas: A: 300MHz to 1.8GHz, power handling 1kW, antenna factor 15 - 32dB, B: 1 to 12GHz, power handling 10 W, antenna factor 25 - 44dB. Complete with tripod. Antennas cont’d. AH Systems SAS-200/550-2B 100Hz to 60Mhz Rod Antenna AH,SAS-200/550 (1837) AU Monopole rod antenna. Frequency range 100Hz to 60MHz. Active unit with battery power. Rod height 220mm to 1.09m. Ground plane 450 x 450mm. Antenna factor 0 to 24. AH Systems SAS-200/571 Antenna AH,SAS-200/571 (1840) AU AH,SAS-571 MY Double ridge guide horn antenna. Frequency range 700MHz to 18GHz. Continuous power 300W. Impedance 50Ω 200V/m max radiated field. Type N(f) connector. Anritsu Dipole Antenna Kit ANR,ANTENNA (1834) AU MP534A dipole antenna 25 to 520MHz and MP651A 470 to 1700MHz. Directional Yagi Antenna ANT,DIRECTIONAL YAGI (1829) AU Various directional Yagi antennas. Frequency rangers from 824 M (UHF) to 2.17 GHz (UHF). Omnidirectional Antenna ANT,OMNIDIRECTIONAL (1826) AU Various omnidirectional antenna types such as telescopic whip, folded dipole and monopole. Frequency ranges from 70MHz to 2.17GHz. COM Power Double Ridged Horn Antenna 1 to 18GHz COM,AH-118 MY Frequency range 1 to 18GHz, VSWR 2.0:1, Polarization: Linear, Output Impedance: 50Ω, connector types Antenna output: N (f). RF Accessories RF Connector Kit N, BNC, TNC, SMA, APC7 TR,RF-CONN (2816) AU RF connection adaptors. Comprises couplers with interchangeable connectors; DIN 7/16, N Type, BNC, SMA, TNC, APC-7 and UHF Huber & Suhner Sucoflex 104PE 26.5GHz RF Cable SUH,SUCOFLEX-104PE MY Fexible high performance microwave cable with frequency range up to 26.5GHz. Length 1.0 meter and comes with 3.5mm connectors. www.techrentals.com.au Radio Frequency Our rental with purchase option scheme is available to approved business customers. Generally the rates quoted on the rental purchase option are based on a 12 month rental period after which you may purchase the equipment by paying an amount equal to month’s rental. However these plans can be tailored to suit your particular timeframe requirements. If you have any questions about this scheme or the type of equipment that would apply please call our technical representatives to discuss your requirements.
  • 21. 20 LAN Cable Testers LAN/WAN Analysers PDH/SDH Analysers DSL/POTS Test Set Light Sources & Power Meters Fusion Splicers OTDR & Fibre Inspection Fibre Optic Launch Cables & Patch Leads Fluke DSX-5000 Cable Analyser 1 GHz Class FA FLU,DSX-5000 (3278) AU 1GHz cable analyser copper test solution enables testing and certification of twisted pair cabling for up to 10 GigE deployments and will certify shielded and unshielded structured cabling systems Cat 3, 4, 5, 5e, 6, 6A, Class C, D, E, EA, F, and FA at Level V accuracy. 9 second Cat 6 autotest. Built in Alien Crosstalk testing capability. LinkWare PC reporting software included. Fluke DTX1800 Cable Analyser 900MHz Cat 7 FLU,DTX1800 (3260) AU/MY Category 7 cable certification tester up to 900MHz. TeststoCategory3,4,5,5E,6,6aand7.Cableanalyser for use with shielded and unshielded twisted pair Cat 6 Autotesttimeof12seconds.LinkwarePCsoftware,and USB cable included. Internal memory stores results. Optional multimode & single mode OTDR module. Fluke DTX-MFM2 Multimode Fibre Adaptor for DTX Cable Analyser FLU,DTX-MFM2 (3270) AU/MY DTX1200/1800 multimode fibre interface. Tests fibre installations in local area networks. Fits in the slot on the back of DTX cable analyser (standard copper cable adaptors can be connected but not used simultaneously). Provides fibre testing and certification. Bi-directional testing at 850nm & 1300nm at the same time. Measures optical power loss, length, and propagation delay for multimode fibres. Pass/fail results based on common fibre standards. Includes in built visual fault locator. (VFL). Fluke DTX Compact OTDR SM-MM FLU,DTX-OTDR (3280) AU Full featured multimode & single mode OTDR module that snaps onto a DTX Cable Analyser. Shoots and analyses traces on single mode 9nm and multimode 62.5 & 50nm fibre. Fluke DTX Permanent Link Adaptor Analyser FLU,DTX-PLA (3295) AU Fluke PLA001 Permanent Link Adaptor. Fluke DTX Fibre for DTX Cable Analyser FLU,DTX-SFM MY DTX1200/1800 singlemode fibre interface. Tests fibre installations in local area networks. Fits in the slot on the back of DTX cable analyser (standard copper cable adaptors can be connected but not used simultaneously). Provides fibre testing and certification. Bi-directional testing at 1310nm & 1550nm at the same time. Measures optical power loss, length, and propagation delay for singlemode fibres. Pass/fail results based on common fibre standards. SC optical connectors. Includes in built visual fault locator (VFL). LAN Cable Testers cont’d. Fluke DTX-SFM2 Single Mode Fibre Adaptor for DTX Cable Analyser FLU,DTX-SFM2 (3265) AU/MY DTX1200/1800 single mode fibre interface. Use for testing fibre installations in local area networks. Fits in the slot on the back of DTX cable analyser (standard copper cable adaptors can be connected but not used simultaneously). Provides fibre testing and certification. Bi-directional testing at 1310nm and 1550nm at the same time. Measures optical power loss, length, and propagation delay for single mode fibres. Pass/fail results based on common fibre standards. SC optical connectors. Includes in built visual fault locator. (VFL) LAN/WAN Analysers EXFO AXS-200-850 Ethernet Test Set EXF,AXS-200_850 (3228) AU Two AXS-200/850(s) for installing, tuning up or maintaining Ethernet and IP services up to 1Gbit. Bidirectional RFC 2544 testing. Applications include performance assessment of Carrier Ethernet services, activation and maintenance of metro Ethernet networks, deployment of active Ethernet (point-to-point) access services, traffic generation and monitoring for network performance testing Bit-error-rate testing (BERT) up to layer 4. Pass/fail results with user-defined thresholds. QoS, ToS and diffserv capabilities. Copper and SM & MM fibre interface supplied. EXFO ETS-1000L 10/100/1000 Ethernet Loopback EXFO,ETS-1000L MY Ethernet/Gigabit ethernet loopback unit ETS-1000L is intended for performing loopback at the physical, data link, network and transport layers of the OSI model. It allows carrying out loopback control via OAM protocol and remote control via TELNET protocol. EXFO FTB-860G NetBlazer 10G Ethernet Tester EXF,FTB-860G (3223) AU Performs 10 Gbps RFC 2544 measurements and EtherSAM (ITU-T Y.156sam), for turnkey deployment, validation, and troubleshooting of access and metro ethernet services. IPv6 testing capabilities BERT, RFC, traffic gen and through mode. NetBlazer offers GUI navigation, dedicated quick-action buttons, and clear notifications for accurate interpretation of test results. Fluke Networks Etherscope II Gigabit LAN Analyser FLU,ETHERSCOPE-EX (3226) AU 10M/100M/1Gigabit Copper, Fibre and WLAN a/b/g network analyser. Discover network elements and fault location even in a switched environment. IP analysis of Carrier Ethernet services. VLAN discovery, connected host details and trending data. Document and report network performance. View detailed information about RF signal strength, APs, SSID, channel information and more. Cable ID accessory for tracking cable routes included. Fluke Optiview Pro Gigabit 10/100/Gigabit LAN Analyser FLU,OPTIVIEW-GIG (3227) AU Provides network analysis on 10/100/Gigabit ethernet networks (multimode fibre & copper). Features active discovery in switched networks, full 7 layer analysis, ITO (Internetwork Throughput Option), trace switch route, free string match, reporting and documenting, address-to-name mapping, packet capture and decode, SNMP device analysis, RMON II traffic analysis, application level traffic analysis and much more. LAN Cable Testers Data & Telecommunications www.techrentals.com.au
  • 22. 7” 12 HOURS 1sec 2Gb iOLMReady:Turn complexOTDRanalysis intoaone-touchtask Outdoor-enhanced touchscreen Intuitive, Windows-like GUI Improved navigation and performance Rugged enough for any OSP environment Never-let-you- downbatterylife Ready to test in 1 second Storeupto 20000traces (bellcore) COMPACT. POWERFUL. INTUITIVE. Introducing Uncompromising Tablet-Inspired Handheld OTDRs, the MAX-700B series. Three models to cover the most common fiber test applications www.EXFO.com/MaxOTDR › MAX-715B Last-Mile OTDR › MAX-720B Access OTDR › MAX-730B FTTH/PON OTDR LAN/WAN Analysers cont’d. JDSU SmartClass 10M-1G Ethernet Tester JDSU,CSC-ETHTR-PC (3249) AU SmartClass Ethernet for comprehensive installation, turn up and maintenance of Ethernet IP services up to 1 Gbit. Performs Bidirectional RFC 2544, Asymmetric RFC and multiple streams testing. Applications include performance assessment of Carrier Ethernet services, activation and maintenance of metro Ethernet networks, deployment of active Ethernet (point-to-point) access services, traffic generation and QoS verification. JDSU SmartClassEthernet 10M-1G Ethernet Tester JDSU,SMARTCLASS-ETH (3220) AU Two SmartClass Ethernet(s) provided for comprehensive installation, turn up and maintenance of Ethernet IP services up to 1 Gbit. Performs Bidirectional RFC 2544, Asymmetric RFC and multiple streams testing. Applications include performance assessment of Carrier Ethernet services, activation and maintenance of metro Ethernet networks, deployment of active Ethernet (point-to-point) access services, traffic generation and QoS verification. PDH/SDH Analysers JDSU ANT 5 SDH/PDH Access Tester JDSU,ANT5-STM4 (3445) AU/MY Field tester for the installation, commissioning and fault finding of fibre and copper SDH/PDH networks. Electrical interfaces for PDH/SDH: E1, E3, DS3, E4, STM-0e/1e; Optical interfaces for SDH/SONET: STM-1/OC-3, STM-4/OC-12. BERT, round trip delay measurement, error performance analysis: G.821, G.826, G.828, G.829, M.2100,M.2101 and ANSI. Autoconfig functionality for automatic traffic detection, line rate, structure and mapping. Offline Viewer SW provides result analysis and report generation. PDH/SDH Analysers cont’d. JDSU ANT 5 SDH/PDH Access Tester JDSU,ANT5-STM16 (3446) AU/MY SField tester for the installation, commissioning and fault finding of fibre and copper SDH/PDH networks from 1.5Mb/s to 2.5 Gb/s. Optical testing at dual wave lengths at STM-1, STM-4, and STM-16. Electrical testing at DS1/E1/E3/ DS3/E4 and STM-1 interfaces. Full analysis of concatenated mappings. ATM analysis for service verification of ATM and 3G/UMTS networks. JDSU EDT-135 E1 and Data Tester JDSU,EDT-135 (3450) AU/MY Field service tester for commissioning, maintenance and troubleshooting of E1 PCM2Mbps and V.11/RS-442, V.24/RS-232, V.35,V.36/RS-449, EIA-530 data circuits operating at 50bps to 2Mbps. Provides framed & unframed monitoring, end-to-end testing, drop & insert, channel associated signalling; error & alarm analysis, S bit, NFAS & NMFAS monitoring & generation. Round trip delay measurement, G.821, G.826 & M.2100 quality of service measurements. Signal level measurement & primary multiplexer testing. Acterna MTS 8000/T-BERD Transport Module JDSU,MTS8000 MY Multirate interface for PDH-DS1/DS3/E1/E3/E4,STS-1 OC-3/12/48/48, STM- 1e/1/4/16 and interface for OC-192 STM-64 with the ability to monitor down to the STS-1 level inside of any supported optical rate. Used for verifying and qualifying the performance of SDH and Gigabit ethernet, telecommunications networks.Electricalandopticalinterfacesatrates1310/1550nm).Alsosupports the NewGen (ethernet over Sonet/SDH) and able to perform RFC2544. Ethernet IP testing with 10/100/100Mbps electrical RJ-45 Interfaces. Supports VLAN, Q-in-Q,VPLS,MPLS Tunnelling application. Comes with touch screen GUI operation. Measures optical power and frequency. Floppy drive installed. Data & Telecommunicationswww.techrentals.com.au
  • 23. 22 Light Sources & Power Meters cont’d. Fluke FTK1000 Multimode Fibre Optic Light Source & Meter FLU,FTK1000 (3365) AU Light source is multimode 850nm and 1300nm. Power meter has 850/1300nm multimode and 1310/1550nm single mode. Manage results and print reports via Power meter memory, PC and supplied software. Fluke FTK150 Optical Fibre Light Source/Meter FLU,FTK150 (3366) AU Fibre test kit. Light source is multimode 850nm and 1300nm. Power meter has calibrated measurements at 850/1300nm multimode and 1310/1550nm single mode. +3dBm to -55dBm measurement range with 0.01dB resolution. Manage results and print reports via Power meter memory, PC and supplied software. Supplied with various connectors and patch leads. JDSU/Acterna OLA-55 Single Mode Optical Attenuator JDSU,OLA-55 MY Adjustable wavelength from 1260 to 1650nm (1nm increments). Calibrated wavelengths 1310nm, 1550nm & 1625nm. Maximum permitted level =23dBm. Optical Interface: FC-PC. JDSU OLP-55 Optical Power Meter JDSU,OLP-55 MY Optical Power Meter BN 2277/01 Power & Loss Measurement for installation, maintenance and repair of fiber optics networks. Display Range: -70 to +20dBm, calibrated wavelengths: 850, 1310, 1550 & 1650nm. Optical connection: FC. JDSU OLSP-55 Optical Laser Source JDSU,OLS-55 MY Operates on dual wavelength of 1310nm and 1550nm. Output power is from -7 to 0 dBm. Optical Interface: FC-PC. Kingfisher KI-28010 Single Mode APC Light Source and KI-7600 Power Meter KIN,KI28010-2600 (3361) AU Singlemode light source KI-28010 and power meter KI-2600. Compatible with APC and PC singlemode networks. Wavelengths 1310, 1550 and 1625nm. Memory with text, timestamp and USB dump, real-time PC reporting software. Autotest provides fast, easy and automatic multi wavelength loss testing. Kingfisher KI78010 Single Mode APC Light Source and KI7600 Power Meter KIN,KI78010-7600 (3360) AU Light source (KI78010) and power meter (KI7600) optical fibre test set for single mode network and DWDM testing at 1310, 1550 and 1625nm. LS (KI78010) has Angled SC, FC and ST interchangeable connectors. PM (KI7600) with InGaAs detector has large user memory and flexible real-time PC reporting software. Autotest provides automatic multi wavelength loss testing. Power meter can be used for multiple single and multimode wavelengths. Kingfisher KI7822B- KI7600A Single Mode Light Source & Power Meter KIN,KI7822B-7600A (3362) AU Light source (KI7822B) and power meter (KI7600A) optical fibre test set for single mode applications (1310nm and 1550nm). Power meter has large user memory and flexible real-time PC reporting software. Autotest provides automatic multi wavelength loss testing. The meter displays mW, μW, nW, dB, dBm to 0.01dB resolution, with no range changing delays. Power meter can be used for multiple single and multimode wavelengths. Laser output power 0dBm. PDH/SDH Analysers cont’d. JDSU SmartClass E1/Datacom Tester JDSU,SMARTCLASS-E1-D AU JDSU,SMARTCLASS MY Handheld field tester for the installation and commissioning of E1 and Datacom services. Applications include (not limited to), G.703 - 2Mb/s testing, 2 M (Bulk), n x 64kb/s BERT, audio monitoring (VF drop & insert),ABCD/Sa monitoring,alarms(defects)anderrors(anomalies)insertion, round-trip delay, DTE / DTE emulation and monitor mode. Interfaces with X.21, V.24 (RS-232), V.35, V.36 (RS-449), and EIA-530. VeEx VePal TX130E+ DSn/PDH/Ethernet Analyser VEEX,TX-130E+ MY Full-featured Mobile test solution supporting legacy PDH/DSn and Carrier Ethernet technologies. Provides E1 and 1G Ethernet Testing according to RFC2544 standards. VeEx VePal TX130M+ DSn/PDH/Ethernet Analyser VEEX,TX-130M+ MY Full-featured Mobile Backhaul test solution supporting legacy PDH/DSn, Carrier Ethernet technologies, and Synchronized Packet networks. The unit is capable of emulating both Master and Slave clocks according to ITU-T G.8261 SyncE and IEEE 1588v2 standards. At the same time able to provide E1 and 1G Ethernet Testing according to RFC2544 standards. It has options of Pulse Mask, E1 Wander and MTIE&TDEV. VeEx VePal TX130+ E1 /Datacom Tester VEEX,TX-130+ MY Handheld field tester for installation and commissioning of E1 and Datacom services. It is a small and compact unit. DSL/POTS Test Set Line and DSL Test Set FLU,990DSL 2/2+ (3470) AU CopperPro broad range Plain Old Telephone Services (POTS) troubleshooting, fault location and line qualification capabilities. Includes Wideband/TDR option which adds high frequency transmission testing and qualification functions for services like ADSL 2/2+, VDSL, HDSL, HDSL2 & 4, ISDN, T1, E1 and DDS. TDR feature adds precise fault location and analysis. Includes TN2100 remote terminator. Light Sources & Power Meters EXFO PPM-350B-EG PON Power Meter EXFO,PPM350B MY OptimiSed for FTTx E & GPON. PPM350B has 10 user-definable threshold sets, each set consisting of three wavelengths (1310, 1490 and 1550 nm) having their own pass/warning/fail analysis features. Simultaneous measurement and display of all PON signals voice, data and video. EXFO PON/FTTx Power Meter & Inspection Probe EXF,PPM352_FIP400 (3370) AU Kit includes PPM-352B-EG-ER optimized for FTTx E & GPON & FIP-400 inspection probe with handheld display. PPM352 has 10 user-definable threshold sets, as well as pass/warning/fail analysis features. Simultaneous measurement and display of all PON signals voice, data and video. Data & Telecommunications www.techrentals.com.au
  • 24. 23 Fusion Splicers Fitel S123M12 Ribbon Fusion Splicer FIT,S123M12 (3312) AU Hand-held fusion splicer, can splice from 1 to a maximum of 12-ribbon fibre. Protection sleeve shrink time is 35 seconds for ribbon fibre sleeve, while splicing requires only 15 seconds for 8 or 12 ribbon fibre allowing up to 160 splicing cycles (splicing/heating) using the 2 battery packs installed in the main body. Includes S325 cleaver and thermal jacket stripper. Fitel S178 Fusion Splicer and S325 Cleaver FIT,S178_S325 (3314) AU S178 hand-held, core-alignment fusion splicer and S325 cleaver. Splicer provides typical losses of 0.02dB and 0.01dB on single and multimode fibre respectively. 7 second splice time, built in heater and tension test. Can be operated from battery or AC source. Precision fibre cleaver can be used with single & multimode fibres and features a built in sharps collection bin that automatically stores fibre off-cuts. Fujikura FSM60R Ribbon Fusion Splicer, Cleaver, Stripper FUJ,FSM60R-CT30 (3310) AU Ribbon fibre fusion splicer, will splice from 1 to 12 fibres. Splice time 20 sec, sleeve shrink time 40 sec, typically. Detachable work table and arc-free calibration system. Includes CT-30 fiber cleaver and thermal jacket stripper. Fujikura FSM60S Splicer & CT30 Cleaver FUJ,FSM60S-CT30 (3320) AU/MY Typical splice losses of 0.02dB and 0.01dB on single and multimode fibre respectively. Features splice protection heater, detachable work table and arc-free calibration system. Fujikura FSM70S Core Alignment Fusion Splicer FUJ,FSM70S (3318) AU Single fibre core alignment fusion splicer and CT30A cleaver. Typical splice losses of 0.02dB and 0.01dB on single and multimode fibre respectively. Automated tension test, wind and heater cover, 7 second splice time and 14 second heat time. OTDR & Fibre Inspection See also LAN Cable Testers on page 20 Anritsu CMA 4500 Single & Multimode 5/25dB OTDR ANR,CMA4500SM-MM (3338) AU Single mode and multimode OTDR. Includes wavelengths multimode 850/1300nm (24/26dB) and single mode 1310/1550 (35dB). Single mode port is SC/APC. Ethernet, USB connectivity, 20GB HD and PS2 ports. Touch screen and hard key interfaces. OTDR & Fibre Inspection cont’d. Fluke Optifiber Pro Multimode OTDR FLU,OPTIFIBER-PRO-MM (3343) AU MMultimode OTDR, wavelengths 850 and 1300nm. Designed for testing, troubleshooting and certifying multimode 50 and 62.5um fibre optic networks. Smartphone user interface, shortest event and attenuation deadzones, LinkWare download and reporting software included. Fluke Optifiber Pro Quad OTDR FLU,OPTIFIBER-PRO Q (3344) AU Multi and singlemode OTDR, wavelengths 850, 1300, 1310 and 1550nm. Designed for testing, troubleshooting and certifying multi and singlemode 62.5, 50 and 9um fibre optic networks. Smartphone user interface, shortest event and attenuation deadzones, LinkWare download and reporting software included. JDSU Fibre Inspection-Capture Probe JDSU,FIBER_INSPECT (3340) AU Handheld display, dual magnification (200/400x) probe and USB adaptor for fibre end-face image analysis and capture. Includes software and various probe tips. JDSU MTS-4000 OTDR with E4136FCOMP-MA JDSU MTS-4000-FCOMP (3334) AU Maintain metro and PON-based FTTx networks. 1310, 1550 and 1625nm wavelengths at 42, 40 and 40 dB dynamic range (respectively), includes power meter, VFL, NBN auto test sequences and fibre inspection probe. Performs insertion loss (IL), optical return loss (ORL) and OTDR from one optical port. Applications include bidirectional testing, trouble shooting and acceptance testing. Fibre Optic Launch Cables & Patch Leads Launch Fibre Multimode 50μm 100m FIB,LAUNCH MM 50UM (3380) AU 100 metres of 50μm fibre terminated with SC connectors. A launch fibre enables an OTDR to measure the loss of the first connector and adapts a 62.5μm OTDR to a 50μm network. Launch Fibre Multimode 62.5μm 300m FIB,LAUNCH MM 62.5UM (3382) AU SC to SC multimode 62.5μm launch fibre. Launch Fibre Single Mode 9μm FIB,LAUNCH SM 9UM (3378) AU Single mode 9μm SC launch fibre. Data & Telecommunicationswww.techrentals.com.au Fibre optic consumables available for sale. Please ask for delivery when placing your rental order.
  • 25. 24 Cable & Pipe Tracers & Fault Locators Electrical Testers PAT Testers & RCD Testers Micro-Ohm Meters & Earth Testers Power Analysers, Loggers & Recorders Current Clamps Probes & Accessories Insulation Testers & Meggers to 20kV Oil, Hipot & VLF Testers above 20kV Circuit Breaker Testers Transformer Testers Current Injectors Protection Relay Testing Systems AC Sources/Inverters/Generators Power Transformers & Variacs Battery Management Systems See also Ground Penetrating Radar on page 61 See also Underground Services Location on page 61 CScope CATXDSGV-KIT Cable and Pipe Locator CSC,CATXDSGV-KIT (3730) AU/MY Industry standard locator used to determine the exact location of buried pipes and cables. Functions include: Power mode for detecting live imbalanced cables to a depth of 3m. Radio mode for detecting re-radiated radio signals to a depth of 2m. Generator mode for detecting conductors carrying the signal generated by the C.Scope signal generator. Fluke Cable Locator FLU,2042 (3602) AU Ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits as well as locating interruptions and short-circuits in cables and electrical floor heating systems. Can be used for tracing metallic water and heating pipes. Supplied as a kit comprising a transmitter and receiver in a carry case. Voltage measurement range 12 to 400 volts. Frequency range 0 to 60Hz. Transmitter output signal 125kHz. Transmitter voltage 0 to 400V ac/dc. Depth location 0 to 2.5m. Receiver voltage detection range 0 to 0.4m. The receiver incorporates a torch for working in dimly lit locations. Cable & Pipe Tracers & Fault Locators cont’d. Megger MPP1002 Cable Fault Pinpoint Locator MEG,MPP1002-FAULT PP (3603) AU Pinpoints faults in shielded and direct buried primary cables via Geophone probe(s). Can be used with any surge generator (thumper). Stand-alone unit measures electromagnetic surge and supplies the amplitude of that surge which aids in finding the fault. When fitted with probes the unit will detect the acoustic discharge (thump), measure the time delay between acoustic and electromagnetic signals and calculate the distance to fault. Using the dual probe system the direction to fault is indicated. Detects faults up to 23m away. Battery powered. Megger TDR20002RM Dual Channel TDR Cable Fault Locator MEG,TDR2000/2RM (3605) AU Time Domain Reflectometer cable fault locator. User selectable ranges from 0 to 50m up to 20km, minimum resolution 0.1m. Dual cursor measurement. Internal memory for 15 traces. Megger “Tracemaster” software supplied. RS232 interface for PC communications. High resolution LCD display. Battery powered. Dust and shower proof to IP54. Riser Bond 1205T-OSP Metallic TDR Cable Fault Locator RB,1205T-OSP MY Dual input metallic time domain reflectometer cable fault locator for coaxial cables. Maximum Range: 63,700ft (19,400meters) at .990 VOP. Distance Accuracy: ±0.1ft (0.03m) plus ±.01% of reading. Can store, recall and download waveform, via RS232 cable. (Viewable with Software.) Electrical Testers See also Current Clamps Probes & Accessories on page 31-32 ABB CB-2000 Portable Capacitance Meter ABB,CB2000 (3500) AU Portable (2.4kg) capacitance meter (0 - 1000μF) which allows individual capacitors in a capacitor bank to be measured without disconnection. Battery powered with an ac adapter. Approximately 8 hours operating time between charges. Supplied software and drivers allow measured values to be exchanged to and from a PC via supplied USB cable. Data stored as tab delimited text files. Hioki 3283 Clamp on Leak HiTester HIO,3283 MY Monitor leak current fluctuations. Bandwidth 5Hz to 15kHz. AC current range 10mA to 200A, resolution 10microA. Accuracy ±1%. LCD display. Battery powered. Martindale Phase Sequence & Continuity Indicator 100 to 600V, 50/60Hz MAR,PSCI424-585 (3502) AU Check the presence and sequence of the phases on 3ph circuits. Provides a visual indication of loss of phase or incorrect sequence. Supplied in 2 forms. Probe style; the connection to the tester is via 3 insulated cables to 3 fused test probes, 1 with an insulated crocodile clip. Plug style; a 16A, 4 pin (3ph & earth, BS4343) plug is fitted to the tester. Use as a socket tester prior to plugging in 3ph equipment. Cable & Pipe Tracers & Fault Locators Electrical Power www.techrentals.com.au The film symbol indicates there is a ‘how to video’ online for that product, see page 1.
  • 26. 25 PAT Testers & RCD Testers Megger RCDT330 Residual Current Device Tester MEG,RCDT330 (2618) AU Tests standard, DC, selection and programmable RCDs. Ramp testing. Auto (remote) testing. Auto sequence test feature. 3ph safe. Enables testing on 110V centre tapped supplies. Performs 1/2I, 1xI & 50xI tests on RCDs rated at 10mA, 30mA, 100mA, 300mA, 500mA & 1,000mA on general and selective (time delayed) RCDs. Weatherproof to IP54. USB interface for test results download. Metrel IT3017- Installation Tester for Testing to AS/NZS3000 MET,IT3017INSTALTEST (2610) AU Multifunction installation tester with measurement functions and Pass/Fail limits set to AS/NZS3000 Wiring Rules. Capable of storing test results for printing compliance test reports. In-built Australian measurements and Pass/Fail limits, and guarantees accountability and traceability with storing of test results. Simply conduct the test, press the Memory button to save the result and assign the result to a location, then download results to PC software and print-out compliance test reports with actual test results. Earth Continuity & Resistance, Insulation Resistance, Polarity, Correct Circuit Connections, Fault Loop Impedance and RCD Testing. “Auto-Sequence Test” mode further speeds up compliance testing and reporting. Seaward PAC 3760 Appliance Checker SEW,PAC3760 (2605) AU Performs the following tests in conformance to AS/NZS 3760:2000; earth bond, insulation & polarity tests, leakage current tests for Class I & Class II appliances and leads (leakage current testing of appliances, which requires power to “switch” them on, is the method required by AS/ NZS3760:2003). Simple pass/fail indication. Unique 3 button operation. Class I, class II and leakage current. Automatic test sequence senses an IEC or or extension lead then performs a polarity test. Detects that the appliance under test is switched “On”. Earth bond test is set at 10A and is capable of fusing a poor earth. Seaward ProTag OPTIMA-300 Testing and Tagging System SEW,PT-300 (2603) AU Comprises the Seaward PrimeTest 300 appliance and RCD tester, ProTag Optima test tag printer and the BCS- Blue bar code scanner. Battery powered, weighs around 2kg. Carries out all of the tests required under AS/NZS3760 for appliances and leads, and 30mA RCD tests. Operates as a handheld data logging device by recording any type of test, inspection or risk assessment with user defined inspection routines and an in-built library of measurement and engineering units for recording actual results. Seaward Supernova XE3760+ PAT System with Printer and Scanner SEW,XE3760PKIT+ (2600) AU/MY Includes results label/tag printer and barcode scanner. Performs all AS/NZS3760: 2001/2003 compliant tests, including class 1 & class 2 leakage current 5mA/1mA, an earth conductor bond test up to 25A at 3V (approx. 100W) and 250VDC MOV insulation resistance tests. Stores 5,000 tests in internal memory by appli- ance ID, including test type, detailed results, test time & date, next test due date, site & location. Calibrated resolution better than the required 5% of FS across all ranges as specified by the Standard. Full QWERTY keyboard, and bar code reader for input. Durable plastic adhesive test label/tags printed to attach to appliances and leads includes user ID (logo optional on request) and test barcode ID, saves transcription. Compatible with Seaward PATGuard plus software package. Micro-Ohm Meters & Earth Testers Fluke 1623 KIT GEO Earth Ground Tester FLU,1623-KIT (2655) AU Measure total earthing resistance (RA) with 2, 3 or 4-pole Fall of Potential method and selective earth resistance measurement (0.001Ω to 19.99 kΩ). Stakeless ground loop measurements (0.001Ω to 199.9Ω). Battery powered. Fluke 1625 KIT GEO Earth Ground Tester FLU,1625-KIT (2650) AU Measure total earthing resistance (RA) with 3 or 4-pole Fall of otential method, selective earth resistance measurement and 4-pole soil resistivity testing (0.001Ω to 19.99kΩ). Stakeless ground loop measurements (0.001Ω to 199.9Ω). Includes automatic frequency control to minimise interference effects. Battery powered. Fluke 1630 Earth Ground Clamp FLU,1630-EARTH CLAMP (2651) AU/MY Earth ground loop testing and continuity testing without breaking the circuit. Ground loop resistance range 0.025Ω to 1.5KΩ. Ground leakage current measurement range 0.2mA to 1000mA. Current measurement range 0.2A to 30A. Logs and stores measurements for on screen recall. LCD display. Battery powered. Fluke Clamp for Ground Loop Resistance around Power Pylons FLU,EI-162BN (2652) AU Split core transformer designed to work with the Fluke 1623 and Fluke 1625 earth ground testers to make selective earth ground loop resistance measurements on power pylons. Inner diameter of the clamp is 310mm. Megger High Accuracy Configurable Diagnostic Earth Tester MEG,DET2/2 (2653) AU Provides a wide resistance range from 0.01Ω to 19.99kΩ for testing larger or more complex grounding systems and for difficult testing environments, with ±0.5% accuracy and 0.001Ω resolution. Microprocessor control and advanced filtering simplify testing in environments with high levels of interference. Megger DET20C Digital Earth Test Clamp MEG,DET20C (2654) AU Measures ground resistance from 25mΩ to 1,500Ω. Measures ground leakage current from 200μA to 35A. Automatic self calibration. Auto ranging. High and low alarms. Large memory. Download to Megger Download Manager. Measures earth resistance in installations such as buildings, pylons and RF transmitter sites. Use for the inspection and verification of lightning protection systems. Large jaw opening. Megger DET4TC2 Digital Earth Tester With Kit MEG,DET4TC2 MY Measurement range of 0.010Ω to 200kΩ, ground noise voltage measurement from 1V to 100V and ground current from 1mA to 20A. Accurate results can be obtained in electrically noisy environments since it is capable of rejecting noise voltages of 40V peak to peak and the user can select different test frequencies to minimise the effect of interference. Powered from 8 AA batteries. Supplied with ICLAMP. Auguments the traditional fall-of potential measurement traditional fall-ofpotential measurement method with ART (Attached Rod Technique) which allows electrode testing without disconnection and also leakage current measurements down to 1mA. The VCLAMP enables true stakeless measurements to be made in situations where driving stakes is not practical. Electrical Powerwww.techrentals.com.au
  • 27. 26 Offices Sydney – Melbourne – Brisbane – Perth
  • 28. 27 Power Analysers, Loggers & Recorders See also Current Clamps Probes & Accessories on page 31-32 CHK GridSense PowerMonic PM20 Power Quality Analyser CHK,PM20 MY Three phase, weatherproof IP65 field unit. Three voltage channels 63V to 440V (isolated). Four current channels 0 to 3kA RMS (3ph & neutral). Supplied with 3 x 1kA clamp-on CTs (cable capacity 50mm), 3kA for large conductors and 500A for neutrals clamp-on CTs are available. Memory 4Mb. In-built 2 line LCD display. Records V, A, pf, f(Hz), kW, kVA, kVAr, THD, total energy and tariffs, high speed RMS waveform capture events outside preset limits (10ms intervals). Software provides graphs and summaries to PC. Download files while logging. RS232 interface. PC using Win 95, 98 or NT4 O/S, is required with the CHK POWERview software to configure this unit before operating. CHK Gridsense Powermonic PM30 Power Quality Analyser CHK,PM30 (8705) AU/MY Weatherproof IP65 field unit. Channels 3 voltage, 63V to 440V (isolated), 4 current 0 to 3kA (3ph & neutral) RMS. Supplied with 3 x 1kA clamp-on CTs (cable capacity 50mm). Clamp-on CTs of 3kA, 1kA for large conductors and 500A & 100A for neutral conductor current measurement are available. Memory 4Mb. In-built 2 line LCD display. Records V, A, pf, f(Hz), kVA, kVAr, kW, harmonics, (THD and individual to 48th). Total energy, tariffs, max demands, transient and sub-cycle disturbances. Software provides graphs and summaries to PC. Download files while logging via RS232 interface. PC using Win 95, 98, NT4, 2000, XP, O/S, is required with the CHK POWERview software to configure this unit before operating. CHK GridSense PowerMonic PM30 Plus Power Quality Analyser CHK,PM30PLUS (8706) AU/MY Weatherproof IP65 field unit. Channels: 3 Voltage, 63V to 440V (isolated). 3 current 0 to 3,000A (3ph) rms. Supplied with 3 flexible 3,000A clamp-on CTs (flexible CT length 600mm and 190mmØ). In addition, clamp-on CTs of 3,000A, 1,000A for large conductors and 500A and 100A for neutral conductor current measurement are available. Memory: 4Mb. Inbuilt two line LCD display. Records: V, A, pf, f(Hz), kVA, kVAr, kW, harmonics, (THD and individual to 48th). Total energy, tariffs, maximum demands, transient and sub-cycle disturbances. Included software provides graphs and summaries to PC. Download files while logging RS-232 interface. A PC using Windows 95, 98, NT4, WIN2000 or XP O/S, is required with the CHK POWERview software to configure this unit before operating. CHK GridSense PowerMonic PM35 Power Quality Analyser CHK,PM35 MY Power logger and disturbance analyser. Weatherproof IP65 field unit. 3 Voltage (55VAC to 520VAC) and 4 current (0 to 3,000A) channels. Supplied with 4 flexible 3,000A clamp-on CTs (flexible CT length 600mm and 190mmØ). Memory:15Mb. InbuilttwolineLCDdisplay. Records: V, A, pf, f(Hz), kVA, kVAr, kW, harmonics, (THD and individual to 48th). Flicker (Pst & Plt), Total energy, tariffs, maximum demands, transient and sub-cycle disturbances. Included software provides graphs and summaries to PC. Downloads files while logging. High speed USB interface. A PC using Windows 95, 98, NT4, WIN2000 or XP (Vista in compatability mode)O/S, is required with the software to configure this unit before operating. Micro-Ohm Meters & Earth Testers cont’d. Megger DLRO10 Micro-Ohm Meter MEG,DLRO10 (2661) AU Self contained fully automatic micro-ohm meter, selecting the most suitable test current up to 10Adc. Range 0.1μΩ to 2kΩ, resolution 0.1μΩ. LED display. Rechargeable battery. Megger DLRO10X Digital Low Resistance Ohm Meter 10A/0.1μΩ-2KOhm MEG,DLRO10X (2633) AU/MY Self contained fully automatic (with manual option) micro-ohm meter, selecting the most suitable test current up to 10Adc. Range 0.1μΩ to 2kΩ, resolution 0.1μΩ. Internal memory for 700 tests. Download software supplied. RS232 communications to PC. LCD display. Rechargeable battery. Megger DLRO200 200A Micro-Ohm Meter MEG,DLRO200 (2664) AU Test current range 10A to 200Adc. Measurement range 0.1mΩ to 1Ω, resolution 0.1mΩ. Current cables 2 x 5m. Internal memory for 300 tests. Download software supplied. RS232 communications to PC. LCD display. Megger DLRO600 Digital Micro-Ohm Meter - High current MEG,DLRO600 (2665) AU/MY Test current range 10A to 600Adc. Measurement range 0.1μΩ to 1Ω, resolution 0.1μΩ. Current cables 2x5m. Internal memory for 300 tests. Download software. Megger DLRO Wind Turbine Lightning Protection Test Lead Set MEG,DLRO-100LEAD (2662) AU For Megger DLRO 10 series digital microohm meters. Specially designed for measuring resistance of lightning protection circuit between wind turbine blade tip and ground. Kelvin clip and hook ends on 100m cable reel. 5m DH2 lead with duplex hand spikes and hook end. Megger DLRO Lead Set Current & Voltage Leads MEG,DLRO-LEADSET (2666) AU For Megger DLRO digital micro-ohm meters. Potential spike lead set x2 and current clip lead set x2. Leads are used to separate the C & P connections. This avoids the erroneously high readings taken due to a high resistance contact. Current clip lead set 2m (242041-7) and potential spike set 2m (242021-7). Megger MOM2 Micro-Ohm Meter MEG,MOM2 (2638) AU Lightweight (1kg), handheld micro-ohm meter. Up to 220A test current, autoranging from 999μΩ to 1000mΩ FS. Rechargable batteries provide 2200 measurements for Imin = 50A, or 800 for Imin = 100A. Memory for 190 recorded measurements, downloadable via Bluetooth with provided software. Kelvin probes included. Electrical Powerwww.techrentals.com.au New items are being added to the inventory constantly, so if you do not see what you are looking for please call 1800 632 652.
  • 29. 28 Power Analysers, Loggers & Recorders cont’d. CHK GridSense PowerMonic PM40 Power Quality Analyser CHK,PM40PQA (8708) AU Weatherproof IP65 field unit. Channels: 3 Voltage, 63 to 440V (isolated). 4 current 0 to 3,000A (3ph and neutral) RMS. Supplied with 4 flexible 3,000A clamp-on CTs (flexible CT length 600mm and Diameter 190mm). Memory: 15Mb. Inbuilt Graphic 128x64 bits LCD display, 7 rows x 20 characters. Records: V, A, pf, f(Hz), kVA, kVAr, kW, harmonics, Inter harmonics, voltage and current imbalance (THD and individual to 48th ) and Flicker. Total energy, tariffs, maximum demands, and transient and sub-cycle disturbances. Included software provides graphs and summaries to PC. Download files while logging USB interface. A PC using Windows 95, 98, NT4, WIN2000 or XP O/S, is required with the CHK PowerView software to configure this unit before operating. CHK GridSense PowerMonic PM45 Power Quality Analyser CHK,PM45 (8709) AU Suitable for low voltage investigations, power profiling and load studies, harmonic analysis, power factor studies & flicker and imbalance monitoring. Features IEC61010 Cat IV 600V safety certificate, weatherproof IP65 case, 4 channel voltage and 4 channels current. Supplied with 4 x Flexi F3000-6 clamps. VA,B & C 0 to 600VAC VGnd 0 to 60VAC, Current input 0 to 3,000A. Dranetz-BMI Power Guide 4400 DRA-BMI,PG4400 (8715) AU Provides the full range of measurements including V, I, W, VA, VAR, TPF, DPF, demand, energy, harmonics & inter-harmonics, THD, harmonics spectrum (V, I, W) to the 63rd, flicker (Pst, Plt), crest factor, K factor, transformer de-rating etc. Asset comes with AC flexible current clamp DRA-BMI,RR3035A/24, current range 30/300/3,000A AC only. Can be extended to different ranges of measurement AC/DC by selecting appropriate current clamps. Has the full range of arithmetic, vector and sequence parameters to evaluate distorted and un-balanced loads as defined in IEEE 1459. Exceeding high/low limits of any active parameter can trigger logging. Voltage & current disturbances. DRA-BMI,PG4400 analysers can be used for power quality measurements, current inrush fault recording long term monitoring and continuous logging at 1s intervals. DRA-BMI,PG4400 is Class A compliant with IEC Standard 61000-4-30, AS61000-4-7 and AS61000-4-15. Dranetz-BMI Power Xplorer PX5 DRA-BMI,PX5 (8716) AU Provides the full range of measurementsincludeV,I,W,VA,VAR,TPF,DPF, Demand, Energy, Harmonics & Inter-harmonics, THD, Harmonics spectrum (V, I, W) to the 63rd, Flicker (Pst, Plt), Crest factor, K factor, Transformer de-rating etc. Min/Max/ Avg values are determined in 1/2 cycle RMS steps. Complete with A/C Flexible Current Clamp DRA-BMI,RR3035A/24, Current Range: 30/300/3,000A AC only. Can be extended to mentioned different ranges of measurement both AC/DC by selecting appropriate current clamps. High-speed transient capture (1MHz sampling rate). Pre-event and post-event waveform capture cycles are user adjustable. Can be used for power quality measurements, current inrush (cycle-by-cycle current logging), fault recording (cycle-by-cycle voltage logging), long term monitoring and continuous logging at 1s intervals. Compliant with IEC Standard 61000-4-30 (Class A), AS61000-4-7 and AS61000-4-15. Power Analysers, Loggers & Recorders cont’d. Fluke 345 Power Quality Clamp Meter FLU,345 (8739) AU For measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Low-pass filter and high EMC immunity design make unit ideal for noisy environments. 600V CAT IV rated, 1400A AC, 2000A DC. Measure and log harmonics, inrush current and ripple current on battery systems. Analyse data and generate reports with included Power Log software. Fluke 435 3-Phase Power Quality & Energy Analyser FLU,435 (8738) AU/MY Power Quality Analyser to suit a broad range of ac mains studies. Includes 4 x 600/6000A ac CTs. A unique energy loss calculator provides the ability to monetarily quantify energy losses. Supplied with Fluke Power Log Software for detailed data analysis and report generation. Fluke 1735 3-Phase Power Logger FLU,1735 (8737) AU/MY Measures single-phase to 3-phase 4-wire circuits, 50/60Hz. 3 voltage inputs with common neutral rated 600Vac (CAT III 600V). 4 current inputs, 4 flexible current probes (15A to 3000A) are included. Records voltage, current, power (P, Q & S), power factor, frequency, energy consumption, averaged demand, harmonics (odd up to 25th order), THD (voltage & current). Includes built-in batteries for up to 12 hours of recording, and includes Fluke Power Log software. Fluke VR1710 Single-Phase Voltage Quality Recorder FLU,VR1710 (8720) AU Single phase power quality analyser. Records RMS, transients, flicker & harmonics up to the 32nd. Selectable logging periods from 1s to 20min. Provides continuous recording with no gaps. Includes software for download, analysis and automatic reporting. Hioki 3169-21 Clamp-On Power HiTester with 4 x 500A CTs HIO,3169-21 CT500AMP (8726) AU Measures voltage, current, power, power factor, harmonics and integrated values. Simultaneously performs demand measurements required for power management and energy-saving. Range 0.05A to 500A. Includes 4 x clamp-on CTs. Supplied software provides graphs and summaries to PC. Flash card data storage. RS232 interface for PC communications. Hioki 3169-21 Clamp-On Power HiTester with 4 x 1,000A CTs HIO,3169-21CT1000AMP (8727) AU Measures voltage, current, power, power factor, harmonics and integrated values. Simultaneously performs demand measurements required for power management and energy-saving. Range 5A to 1000A. Includes 4 x clamp-on CTs. Supplied software provides graphs and summaries to PC. Flash card data storage. RS232 interface for PC communications. Electrical Power www.techrentals.com.au
  • 30. 29
  • 31. 30 Power Analysers, Loggers & Recorders cont’d. Hioki 3169-21 Clamp-On Power HiTester with 4 x 5,000A FlexCTs HIO,3169-21CLAMPONPT (8728) AU Measures voltage, current, power, power factor, harmonics and integrated values. Simultaneously performs demand measurements required for power management and energy-saving. Range 5A to 5000A. Includes 4 x flexible CTs, 500/5000A switchable. Supplied software provides graphs and summaries to PC. Flash card data storage. RS232 interface for PC communications. Hioki 3196 Power Quality Analyser with 4 x 5,000A Flex CTs HIO,3196-PQA (8729) AU/MY High speed field unit, measuring transient and sub-cycle disturbances, total energy, tariffs and max demand. Voltage (150~600V RMS), and 4 current (0 to 5kA), channels. Includes 4 x flexible CTs, 500/5000A switchable. Records V, A, pf, f(Hz), kVA, kVAr, kW, harmonics, and flicker. Memory 512MB flash card. Colour display. Supplied software provides graphs and summaries to PC. RS232 or LAN interface for PC communications. Power Analysers, Loggers & Recorders cont’d. Hioki 3196 Power Quality Analyser with 4 x 1,000A CTs HIO,3196PQA-CT1000A (8730) AU High speed field unit, measuring transient and sub-cycle disturbances, total energy, tariffs and max demand. Four voltage (150~600V RMS), and 4 current (0 to 1kA), channels. Supplied with 4 clamp-on CTs. Memory 512MB flash card. Colour display. Records V, A, pf, f(Hz), kVA, kVAr, kW, harmonics, and flicker. Supplied software provides graphsandsummariestoPC. RS232orLANinterfaceforPCcommunications. Hioki 3197 Power Quality Analyser with 3 x 500A CTs HIO,3197PQA (8731) AU Comprehensive portable PQA. Monitor for: inrush current, voltage swell, voltage dips, transient over-voltage and interruptions. Measure and re- cord: power and power factor, active/reactive energy, demand, load changes (with graph display), voltage and current. Measures impulsive voltage quality: transient over voltage (impulse). RMS voltage quality: voltage swell, voltage dips, voltage interruption. Power quality: frequency, voltage, current, current peak, active/reactive/apparent power, power factor (displaced power factor). Three phase quality: voltage unbalance ratio, current unbalance ratio. Harmonic quality (up to 50th order): harmonic voltage, harmonic current, harmonic power, harmonic voltage/current phase angle, total harmonic voltage distortion, total harmonic current distortion (THD-F, THD-R). Electrical Power www.techrentals.com.au QUALITY PRODUCTS QUALITY RESULTS Power Analysis Data Logging Power Parameters Pty Ltd 83 Northern Road, Heidelberg West, Vic 3081 www.parameters.com.au power@parameters.com.au Freecall: 1800 623 350 Freefax: 1800 067 263 LR8410-20 Memory HiLogger IR5001 Temperature Humidity Logger PW3360-20 Power AnalyserPW3198 Power Quality Analyser NEW Cat IV 600V Class A Save your time and reduce your real costs with our Setup and Download service on page 37
  • 32. 31 Power Analysers, Loggers & Recorders cont’d. Hioki PW3198 Power Quality Analyser with 3 x 1000A AC CT & 1 x 200A AC/DC CT HIO,3198 (8732) AU Premium Power Quality Analyser for demanding applications. Includes 3 x 1000A ac CTs and 1 x 200A AC/DC CT. Ideal for ac mains studies as well as solar inverter evaluations. Supplied with Hioki 9624 PQA-HiVIEW Software for detailed data analysis and report generation. Metrix MX2040 AC/DC Clamp-on Meter MET,MX2040 (8745) AU Measures A, V, Hz, kW, kVA, kVAR, kWH, PF and resistance. Ranges 200A & 2kA, 600V & 1kV, 20kW, 200kW & 2MW & kWH. Scale length 3,000. Single and 3ph operation. Motor rotation indication. Peak, min, max, average, RMS, and crest factor indication. Peak response time 1μs. Analogue output option fitted giving dynamic signals and calculated parameters (energy, etc). Jaw opening 55mm for 22 x 64 bars. Current Clamp Probes & Accessories See also Electrical Testers on page 24 See also Power Analysers & Recorders on page 27-31 CHK 3 Phase Converter for CTs 1A Input to 200mA Output CHK,CK1 (8751) AU Adaptor for CTs with 1A secondary outputs, this unit suits CHK,PM30/20. CHK 3 Phase Converter for CTs 5A Input to 200mA Output CHK,CK5 (8752) AU Adaptor for CTs with 5A secondary outputs, unit suits CHK,PM30/20. CHK CR100 Clamp-on CT CHK,CR100 (8753) AU/MY Jaws 43mmØ inside. Use with CHK,PM20 or PM30 for use as fourth CT to measure neutral current. Accuracy Class 1. CHK CR500 Clamp-on 500 CT CHK,CR500 (8754) AU Jaws 43mmØ inside. Use with CHK,PM20 or PM30 for use as fourth CT to measure neutral current. Accuracy Class 1. Current Clamp Probe 0 to 1A RMS DRA-BMI,TR2501 ( 8765) AU Set of 4 current clamp/probes, range 0 to 10A RMS. Max conductor size 12mm dia. Suitable for power quality analysers DRA-BMI,PG4400, DRA-BMI,PX5 and DRA-BMI,PX5-400. For current measurement through CT current Transformer. CT Ratio can be selected on the above mentioned models. Dranetz TR2510 Current Clamp Probe 0 to 10A RMS DRA-BMI,TR2510 (8766) AU Set of 4 current clamp/probes, range 0 to 10A RMS. Max conductor size 12mmØ. Suitable for power quality analysers DRA-BMI,PG4400, DRA-BMI,PX5 and DRA-BMI,PX5-400. For current measurement through CT current transformer. CT ratio can be selected on the above mentioned models. Fluke 376 True-rms AC/DC Clamp Meter with iFlex FLU,376 (8770) AU/MY 1,000A AC and DC current measurement with fixed jaw. 2500A AC current measurement with the 45cm iFlex flexible current probe. 1000V AC and DC voltage measurement. Voltage and current measurements are true rms. Includes ability to measure frequency, resistance and capacitance. Rated CAT IV 600V and CAT III 1000V. Current Clamp Probes & Accessories cont’d. Fluke i5sPQ3 AC Current Clamps, 5A (3 x i5S per set) FLU,I5SPQ3 (8790) AU A pack of 3 pieces of the i5s 5A AC current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers. CAT III 600 V (For insulated conductors only). Suits the Fluke 435 and other instruments with BNC inputs. Hioki AC/DC Clamp on Meter with Analog Output 20/200A HIO,3284 (8780) AU Can also measure volts, ranges 30V, 300V, 600V AC/DC. Frequency ranges 10Hz, 100Hz, 1,000Hz. Display LCD, counts max 2,500 current, 3,750 voltage, 1,250 frequency. Output voltage 1V for 2,000 count on FS for each current range, can select Rec rms output, response time about 250ms rise time, fall about 500ms. Select Mon for waveform output. 1V is produced for 1,000 count on FS frequency range. Output not available for voltage measurements. Supplied with signal output cord, 4mm to BNC convertor, carry case and AC adaptor. Note: Can be powered with internal 9V battery or AC adaptor. (AC adaptor not supplied.) Hioki 3285 AC/DC Clamp-on Meter with Analog Output HIO,3285 (8781) AU Ranges 200A/2kA AC/DC. Measure volts, ranges 30V, 300V & 600V AC/DC. Frequency ranges 10Hz, 100Hz & 1kHz. Display LCD, counts max 2,500 current, 3,750 voltage and 1,250 frequency. Output voltage 1V for 2,000 count fs for each current range, can select Rec RMS output, response time about 250ms rise time, fall about 500ms. Waveform output. 1V is produced for 1,000 count on FS frequency range. Output not available for voltage measurements. Supplied with signal output cord, 4mm to BNC convertor, carry case and AC adaptor. Powered with internal 9V battery or AC adaptor. (AC adaptor not supplied) adaptor. Hioki 3290 Clamp-On AC/DC HiTester HIO,3290 MY Current Measurement at DC and from 1Hz AC to 1,000Hz. Current Clamp Hioki 9693 Clamp-on AC/DC sensor ranges: 20A, 200A & 2,000A, jaw opening 55mm. Hioki 9660 Clamp-on 100A AC CT HIO,9660CT100A (8783) AU Rated primary current 100A AC. Amplitude accuracy: ±0.5% rdg. ±0.2%fs (at 45 to 66Hz). 66Hz-5kHz ±1% or less. Max circuit voltage 300V RMS/ insulated wire. Core jaw: 15mmØ. Size: 46w x 21d x 135hmm, cord length 3m. Hioki 9661 CCT-500A Clamp-On Sensors 500A, 500mVAC Output HIO,9661 CCT-500A (8784) AU 500A rated, 500mVAC FS output, core jaw 46mmØ. Designed with a safety barrier to protect the user from being in direct contact with live conductors and completely meets all CE marking requirements. Basic specifications: Rated input current 500A AC, rated output current 0.5VAC, accuracy (at 45 to 66Hz), amplitude: ±0.5% rdg ±0.2% FS FS (FS) is the 3196 range value, phase: ±0.5° or less, frequency characteristics 66Hz to 5kHz (±1% or less from accuracy), max allowable input continuous 550A RMS (45 to 66Hz), max circuit voltage 600VAC RMS (insulated wire), core jaw Ø46mm, dimensions, mass 77mm W x 151mm H x 42mm D, 360g, cord length 3m. Electrical Powerwww.techrentals.com.au
  • 33. 32 Current Clamp Probes & Accessories cont’d. Universal Technic Clamp-On AC/DC Current Probe 4000/7500A UNI,P75-3C HYBRID-DP (8796) AU Ranges 7,500A/1.5V & 4,000A/2V with hybrid power fitted for battery and external power supply, 3V operation. Safety sockets 4mm. Clamp is suitable for use with any instrument with an input range of 2VAC or DC, and an input impedance greater than 10kΩ. e.g. voltmeter, chart recorders, oscilloscopes, and power quality analysers. Insulation Testers & Meggers to 20kV EA Technologies UltraTev Plus Partial Discharge Detector EAT,ULTRATEVPLUS (8410) AU Multi-function Partial Discharge (PD) Instrument. It measures accurate PD activity using the UltraTEV detector and an ultrasonic detector. It gives you an objective measure of the level of activity. Will display PD severity level. The kit includes the Ultradish for measurement of overhead assets. Fluke 1587 Insulation Multimeter FLU,1587 MY Insulation: measurement range: 0.01M to 2GΩ. Test Voltages: 500V, 1,000V, 50V, 100V, 250V, 500V, 1,000V Multimeter: Voltage 1mV to 1,000VAC/DC, current 0.01mA to 400mA AC/DC, resistance 0.1Ω to 50.0MΩ, capacitance 1nF to 9999μF, frequency 0.01Hz to 99.99kHz. Fluke 1653 Electrical Installation Tester FLU,1653 MY Tester verifies the safety of electrical installations, according to IEC 60364, HD 384 standards. Functions available: voltage and frequency measurement, insulation resistance testing, continuity testing, loop impedance, RCD tripping time, RCD tripping current, earth resistance and phase sequence. Hioki 3455 High Voltage Insulation Tester HIO,3455HVIT-5kV (8411) AU/MY PI (Polarisation index) and DAR (Dielectric absorption ratio) function to check insulation quality and step voltage test to detect for signs of deterioration. Generates test voltages from 250V to 5kV in commonly used presets of 250V, 500V, 1kV, 2.5kV & 5kV, or set to desired level by increments or decrements of 25V or 100V. Insulation diagnoses for automatic calculation and indication of PI and DAR, step voltage testing and temperature correction. Large memory stores up to 100 manual records and a logging function for 10 data (360 times). Stored data with date and time may be displayed on the LCD or down-loaded. Kikusui TOS-5101 10kV AC/DC Hipot Tester KIK,TOS-5101 (8426) AU Hipot testing up to 10kV in either DC or AC. Digital voltmeter and ammeter, digital timer. Window comparator for more reliable pass/fail judgement. Automatic discharge of device under test in DC test mode. Equipped with Key Lock and Interlock functions for greater safety. Current Clamp Probes & Accessories cont’d. Hioki 9661-01 CCT-500A Clamp-on Sensors HIO,9661-01 CCT-500A (8785) AU 500A rated, 500mVAC fs output, jaw 46mmØ. Rated input current 500A AC, rated output 0.5VAC, accuracy (at 45 to 66Hz). Amplitude ±0.5%rdg, ±0.2%FS, fs is the 3196 range value, phase ±0.5° or less, frequency characteristics 66Hz to 5 kHz (±1%), max. Allowable input continuous 550A RMS (45 to 66Hz), max circuit voltage 600VAC RMS (insulated wire). Dimensions 77mm W x 151mm H x 42mm D, cord 3m. Suitable for Hioki models: 3196PQA, 3197PQA, 3169-20CLAMPONPT, 2331-20RPMS, 8715-01, any data logger/scope which takes up to 1.7mVAC input. Hioki Flexible Clamp-on Sensors 10Hz to 20kHz, 500/5,000A HIO,9667-FCT-5000A (8786) AU 10Hz to 20kHz, 500/5,000A rated, 500mV AC FS output, 254mm diameter maximum. Designed with a safety barrier to protect the user from being in direct contact with live conductors and completely meet all CE marking requirements. Basic specifications: Rated input current 500A AC, 5,000A AC, rated output 0.5V AC, accuracy (at 45 to 66Hz). Amplitude: ±2% rdg ±1.2mV, FS (FS) is the 3196 range value, phase: ±1° or less, frequency characteristics 10Hz to 20kHz, maximum allowable input continuous 1,0000A rms (45 to 66Hz), maximum circuit voltage 1,000V AC rms (insulated wire), core jaw dia Ø254mm(10in). Dimensions: mass 254mmW x 86mmH x 30mmD, 140g. Sensor length: 910 mm. Suitable for the following Hioki Models: HIO,3196PQA, HIO,3197PQA, HIO,3169-20CLAMPONPT, HIO,2331-20RPMS, HIO,2331-20RPMS, HIO,8715-01, any data logger/scope which takes up to 1.7mV AC input. Hioki 9669-CCT-1000A Clamp-on Sensors HIO,9669-CCT-1000A (8787) AU Jaw 55mmØ, 80mm x 20mm busbar. Rated input current 1,000A AC, rated output current 0.5VAC, accuracy (at 45 to 66Hz) amplitude ±1% rdg, ±0.01% fs, fs is the 3196 range value, phase ±1° or less, frequency characteristics 66Hz to 5kHz (±1%), max. Allowable input continuous 1,000A RMS (45 to 66Hz), max circuit voltage 600VAC RMS (insulated wire). Dimensions 99.5mm W x 188mm H x 42mm D, cord 3m. Suitable for Hioki models 3196PQA, 3197PQA, 3169-20CLAMPONPT, 2331-20RPMS, 8715-01, any data logger/scope which takes up to 1.7mVAC input. Hioki 9694 Clamp-on CT 5A HIO,9694CT5A (8789) AU Rated primary current 5A AC. Amplitude accuracy ±0.5% rdg. ±0.2% fs (at 45 to 66Hz), 66Hz to 5kHz ±1% or less. Max circuit voltage 300V RMS/insulated wire. Core jaw 15mmØ. Size mm: 46w × 21d × 135h, cord length 3m. Universal Technic P75.3C DC/AC Amp Clamp UNI,P75-3C (8795) AU Max current 7,500A DC & AC peak. Bandwidth 1kHz. Min range 1kA. Accuracy at 75A 10% of reading. FS accuracy 2% of reading. Max bus size 122 x 54mm or 100 x 64mm. Max cable size 83mm. Battery 9V, life 100h. Output sockets 4mm. DC current gives DC output, AC current gives AC output, 4kA range 0.5mV per amp, 7.5kA range 0.2mV per A. Electrical Power www.techrentals.com.au
  • 34. 33 Insulation Testers & Meggers to 20kV cont’d. Megger MIT525 5KV Insulation Tester MEG,MIT525 MY Light and compact 50V to 5,000V insulation resistance tester. Measures up to 10 Tera ohms. Diagnostic testing and maintenance of high voltage electrical equipment. Various diagnostic tests such as Polarisation index(PI), Dielectric Absorption Ratio(DAR), Step Voltage(SV), Dieletectric discharge (DD) and ramp testing. Mains & battery powered. Megger MIT1020 Diagnostic 10kV Insulation Resistance Tester MEG,MIT1020-10KV DIT (8423) AU Backlit display, variable test voltage from 50V to 10,000V, Automatic IR, PI, DAR, SV and DD tests, measures to 35T, RS232 and USB download of results. IEEE 43-2000 recommends the use of 10kV for motor windings rated above 12kV. Protection rating of IP54. Mains or battery powered. Megger MIT1025 10 kV DC Insulation Resistance Tester MEG,MIT1025 (8427) AU 10kV DC Insulation Resistance Tester. Measures to 20 Tohm at 10kV. Tests include PI, DAR, DD, SV and ramp test. Li-ion battery with rapid charge, mains operation possible while battery is charging. Advanced memory with date/ time stamp. Noise filter rejects up to 3 mA noise. PowerDB Lite asset management software supplied with unit for download of test data to a PC. Megger S1-1052 High Current Insulation Resistance Tester 10kV MEG,S1-1052 10KV-DIT (8424) AU/MY High output current 5mA for fast charging of capacitive loads. Testing up to 10kV, mains or battery powered, digital/analogue backlit display, variable test voltage from 50V to 10,000V, automatic IR, PI, DAR, SV and DD tests. Measures to 35TΩ. RS232 and USB download of results. Megger S1-552 High Current Insulation Resistance Tester 5kV MEG,S1-552 5KVDIT (8425) AU High output current 5mA for fast charging of capacitive loads. Testing up to 5kV, mains or battery powered, digital/analogue backlit display, variable test voltage from 50 to 5,000V, automatic IR, PI, DAR, SV and DD tests. Measures to 15TΩ. RS232 and USB download of results. Oil, Hipot & VLF Testers above 20kV Hipotronics 880PL-10MA-B 80kV DC Hipot Tester HIP,880PL (8491) AU Compact, portable unit (41kg) for DC field testing of cables, terminations, motors, generators and other electrical apparatus. 80kV 10mA output capability with multirange voltmeter and ammeter. For operator safety the power supply and test object are automatically grounded when high voltage is turned off, and there is no exposed high voltage. Guard circuit for accurate leakage current measurement. Includes overload relay and surge limiting resistors in HV output. Oil, Hipot & VLF Testers above 20kV cont’d. High Voltage Inc PFT503, 50kV AC Test Set HIV,PFT503 (8453) AU Single, portable (34kg) unit suited for testing overhead apparatus, vacuum bottles and interrupters, switch gear, bus duct, motorized vacuum switches, reclosers, bushings, fuses and arrestors, linemans safety products, small transformers, electrical components and motors. This 3kVA model features capacitive load compensation enabling full load testing with a power draw of 1.5kVA while operating from a conventional line input. 60mA output current capability. High Voltage Inc PFT-1003CMF 100kV AC Hipot Test Set HIV,PFT1003 (8456) AU Portable(16kgcontrolunit,39kgHVtank)hipottester, 100kV, 50Hz, rated 3kVA into capacitive loads. Features continuously adjustable output voltage, external safety interlock, zero start safety interlock, self resetting over current protection, guard/ground return mode, HV on/off and main power push button ruggedized meters and with glass windows that eliminate static buildup. HV Diagnostics HVA TD60 Portable TanDelta Measurement System HVD,HVA TD60 (8460) AU Optional Accessory for HVD,HVA60-DC/VLF and HVD,HVA90_ DC-VLF. Tan Delta or Power Factor tester used to determine the power factor of cables, transformers, capacitors, rotating machines and other switchgear. This test allows the detection of insulation defects before they fail inservice. HV Diagnostics HVA30 30kV-15mA DC/VLF High Voltage Insulation DielectricsTest Set HVD,HVA30-DC/VLF (8461) AU/MY VLF and DC test capabilities combined in one unit (20kg). Suitable for testing cables (XLPE, PE, EPR, PILC etc), capacitors, switchgear, transformers, machines (IEEE 433), insulators and bushings. VLF (0.1Hz to 0.02Hz), DC (±), cable fault conditioning (burning) and sheath/jacket testing modes all included. Fully automatic or manual cable test sequences complying with International Standards/Guides such as IEEE 400.2, VDE 0276 and CENELEC. True symmetrical sinusoidal, load independent, output waveform across the full load range. Real-time display of actual output wave form. Easy to use, ergonomic, menu guided, large backlit user interface. Large output load capability (up to 5uF). Automatic and integrated load capacitance measurement with optimum frequency selection. Storage of test results for later retrieval or download to a PC/Laptop. HV Diagnostics HVA60 60kV VLF/DC Test Set HVD,HVA60-DC/VLF (8462) AU VLFandDCtestcapabilitiescombinedinoneunit(60kg). Suitable for testing cables, capacitors, switchgear, transformers, machines, insulators and bushings. VLF (0.1Hz to 0.02Hz), DC (±), cable fault conditioning (burning) and sheath/jacket testing modes all included. Fully automatic or manual cable test sequences. True symmetrical sinusoidal, loadindependent,outputwaveformacrossthefullloadrange.Real-timedisplay of actual output wave form. Large output load capability (up to 5μF). Automatic and integrated load capacitance measurement with optimum frequency selection. Storage of test results for later retrieval or download to a PC/Laptop. For a more comprehensive understanding of insulation condition perform tan delta testing at the same time with optional accessory HVD,HVA TD60. Electrical Powerwww.techrentals.com.au
  • 35. 34 Oil, Hipot & VLF Testers above 20kV cont’d. HV Diagnostics HVA90 90kV VLF/DC Test Set HVD,HVA90_DC-VLF (8463) AU VLF and DC test capabilities combined in one unit (127 kg). Suitable for testing cables (XLPE, PE, EPR, PILC etc), capacitors, switchgear, transformers, machines (IEEE 433), insulators and bushings. VLF (0.1Hz to 0.01Hz), DC (±),cablefaultconditioning(burning)andsheath/jackettestingmodesallincluded. Fully automatic or manual cable test sequences complying with International Standards/Guides such as IEEE 400.2, VDE 0276, CENELEC HD620 S1, NEN 3620, SANS 10198 and IEC 60060-3. True symmetrical sinusoidal, load independent, output waveform across the full load range. Real-time display of actual output wave form. Easy to use, ergonomic, menu guided, large backlit user interface. Large output load capability (up to 10uF). Automatic and integrated load capacitance measurement with optimum frequency selection. Storage of test results for later retrieval or download to a PC/Laptop. Optional Accessories: HVD,HVA TD60 Baur DAP75 Insulating Oil Tester BAU,DPA75 (8451) AU Fully automatic insulation oil tester. Output voltage 0 to 75kV RMS. Selectable programmes to international standards. Integral printer. RS232 interface. One transit case on wheels. Total weight is 35kgs. Megger OTS80PB Transformer Oil Tester Insulation Dielectrics Test Set MEG,OTS80PB (8450) AU Test voltage 80kV max at 61.8Hz. Fully automatic operation. Rechargeable batteries. RS232C interface. Phenix BK130 130kVAC Hipot Aerial Lift Test Set PHE,BK130 (8480) AU Tests elevating boom as well as the work platform and linings to ANSI A92.2 draft standard. Can also he used in many other Hipot applications that require the sort of voltage and current this instrument is capable of. Can supply 0 to 130kVAC @ 50mA and 0 to 35kVAC at 171mA. The whole system is built into a trolley cart for ease of use. Measurement accuracy 1% FS for 10 to 100% of range. Transformer Testers Biddle 550005 Turns Ratio Test Set BID,550005 (8550) AU Single phase (can be used on 3ph individual phase windings). Turns ratio 0.001 to 129.999. Exciting current 0 to 1A. Accuracy 0.1%. Hand cranked operation. Megger CAL 300 IDAX Calibration Box MEG,CAL300 (8551) AU Exclusively used for calibration of Megger IDAX Insulation Diagnostic Analysers. Megger IDAX 300 Insulation Diagnostic Analyser MEG,IDAX300 (8552) AU Provides an accurate and reliable condition assessment of insulation in transformers, bushings, generators and cables. It utilises Dielectric Frequency Response in combination with analysis in software to determine the percent of moisture in paper insulation, oil conductivity and an individually corrected tan delta value at 20°C reference temperature. Transformer Testers Megger MTO330 Automated Six Winding Transformer Ohmmeter MEG,MTO330 (8553) AU Delivers full eight-terminal/six-winding resistance measurement capability. It is designed to save time by testing all six windings without having to disconnect and reconnect leads. Also, the simultaneous winding magnetization method gives fast and reliable measurements even on large transformers with delta configuration on the low voltage side. The leads are interchangeable with the Megger TTR320 three-phase turns ratio instrument which eliminates additional connecting time for turns ratio measurements (However, TTR320 leads must NOT be used with the MTO330. The leads have a higher current rating). Includes an on-board computer with QWERTY keyboard, USB and ethernet. Megger TTR320 3-Phase Transformer Turns Ratio Test Set MEG,TTR320-47 (8554) AU Accurately measures ratio, phase deviation and exciting current on 3-phase transformers in the presence of high noise. Can test phase-shifted and tilted transformers, in accordance with IEC61378, when testing via PowerDB. Test results can be stored and downloaded at a later time. Handles ratios up to 45,000:1 with 0.3% accuracy, 0.1% up to 2,000:1. Compatible with the Megger MTO330 transformer ohmmeter leads which eliminates additional connecting time for turns ratio measurements (However, TTR320 leads must NOT be used with the MTO330. The MTO330 leads have a higher current rating). Includes an on-board computer with QWERTY keyboard, RS232 and ethernet. Omicron CT Analyser Current Transformer Analyser OMI,CTANALYZER (8555) AU Portable (8 kg) and automated unit for testing protection and metering CTs on-site. CTs can be verified up to the 0.1 accuracy class. The included CT SB2 switchbox allows automated testing of CTs with up to six taps. Remanence can be measured and cores can be demagnetised. Omicron FRA Frequency Response Analyser OMI,FRA (8556) AU Uses swept frequency response analysis to detect mechanical and electrical changes of the core and winding assembly of power transformers. By finding winding or core defects after faults, mechanical shocks or transportation, it offers a valuable opportunity to improve the reliability of transformers, to reduce maintenance costs and to avoid expensive, unexpected outages. Laptop included, preloaded with the FRAnalyzer software. Circuit Breaker Testers Megger TM1760 Circuit Breaker Analyser System MEG,TM1760 (4670) AU Advanced Circuit Breaker Analyzer with built-in PC and utilising DualGround method for safer testing. Galvanically isolated inputs and outputs makes it possible to perform all relevant measurements in one test, eliminating the need for new setup and re-connections. Includes 3 static & dynamic resistance modules with up to 220A test current, a 3-channel dynamic capacitance module and a full set of required cables. Electrical Power www.techrentals.com.au
  • 36. 35 Current Injectors Multi-Amp MS-2 High Current Test Set MUL,MS-2 (4600) AU Designed to test overload relays, circuit breakers and earth fault trip devices. Input 240V 50/60Hz. Output continuously adjustable in 4 ranges 120V/5A, 24V/25A, 6V/120A & 3V/240A. Short term over current of several times the rated current ranges is possible. Digital current meter has read and hold facilities for short duration currents. Digital timer measures elapsed time between energisation and the test device operating. Omicron CPC 100 Multi-functional Primary Test System OMI,CPC100PTS (4620) AU Portable (29 kg) primary test system suited for testing of current transformers, voltage transformers, power transformers, power lines, HV cables, grounding systems, switchgear and circuit breakers, protection relays and more. Tests to 800A (extended to 2000A with CP CB2) over frequency range 15Hz to 400Hz, or to 400A DC. Laptop included, preloaded with CPC 100 Toolset. Optional accessories: OMI,CPCU1 (with or without OMI,CPSTEP) OMI,CPSB1 OMI,CP-TD1 OMI,CPCB2. Omicron CP CB2 Current Booster OMI,CPCB2 (4605) Combined with the CPC 100, the CP CB2 boosts the output current of a CPC 100 from 800A to 2000A. Omicron CP CU1 Multi-Purpose Coupling Unit for CPC 100 OMI,CPCU1 (4623) AU Combined with the CPC 100, the CP CU1 is a measurement system for line impedances & k-factors of overhead lines or power cables, mutual coupling of parallel lines, ground impedances of large substations and coupling of power lines into signal cables. This test system overcomes the problem of power system frequency interference that has previously made it necessary to use extremely large, high-power equipment to carry out these measurements. OMICRON Step & Touch Voltage Accessory Set OMI,CPSTEP (4624) AU Combined with the CPC 100 and CP CU1, this kit is a measurement system for Step & Touch voltages. The battery powered FFT Voltmeter (CP AL1) operates with short leads and requires no connections back to the CPC 100. Omicron CPSB1 Switch Box OMI,CPSB1 (4621) AU Switch Box to allow fully automated 3 phase transformer testing, accessory for the CPC100. Omicron CP TD1 Capacitance and Tan Delta Add-on OMI,CP-TD1 (4622) AU Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laboratory precision. This allows the insulation condition of transformers, generators and other parts of high-voltage systems to be tested according to IEEE 62 (C57.152), IEC 60076-1 and -3, as well as the CIGRE “Guide for Transformer Maintenance”. As recommended in the CIGRE Guide, testing is performed at variable frequencies to better diagnose signs of ageing in insulation. The portable test system (max. 29 kg per component) can also generate output voltages of up to 12kV. Trolley included. Current Injectors cont’d. SMC PTE-100-C Secondary Current Test Set SMC,PTE-100-C (4601) AU AC current and voltage outputs in 4 ranges 200V/5A, 40V/25A, 20V/50A & 10V/100A. Additional outputs AC voltage 0 to 220V at 1A (4A 1min), DC voltage 0 to 350V at 0.7A (2.8A 1min), DC voltage 0 to 250V at 0.25A, fixed 110V AC at 0.3A. Timer 1ms to 99,999s. Additional functions include measurement of the phase angle between the voltage and the current output tap selected, and the measurement of the impedance of the load connected in the current output taps. T&R 200A-3PH/ED Current injection tester T&R,200A3PHEDIT (4602) AU 0 to 200A/phase output capacity. Power supply 4 wire 5A/phase 3ph 240/415V. Typically 10A 5 pin 3 phase socket outlet. T&R CIT/LU2000 Primary Current Injection Test Set T&R,CIT (4603) AU Comprises control unit and 2kA loading unit (LU). Control unit includes timer, current and voltage meters, and variable output transformer. External loading unit output 0 to 2kA, duty 5min on 15min off at 6VAC, continuous 0 to 1kA at 3VAC. Two units weight 35 & 45kg plus 2 quad 70mm2 cable sets each 3m long. Control unit connects to LU with supplied interface cable. T&R PCU1-SP with CT Ratio/ Polarity and NLU5000A Loading Unit T&R,PCU1-SP NLU5000A (4604) AU Medium powered primary current injection system. Features 5kA maximum output current (higher overload current for 2s). Multi-function digital timing system. Digital true RMS memory ammeter. Solid state switching. 2,000A and 5,000A load units. Three range outputs on loading units. Rugged, compact design. Secondary injection up to 100A. Direct reading CT ratio and polarity. May be configured to either give a maximum current of 5,000A on the 2.3V range, 2,500A on the 4.6V range or 1,250A on the 9.2V range. Protection Relay Testing Systems Omicron CMA 156 Six Phase Current Amplifier (6 x 25A) OMI,CMA156-6PCA (4655) AU Can be used in combination with any CMC test set. The outputs are galvanically separated from the inputs as well as from ground and are used independently or in addition to those of the CMC test sets. The six independent current channels are arranged in two isolated groups (A, B). The outputs can be connected in parallel or in series. The connection to a CMC test set is made by a control cable at the back of the units. Used for tests requiring more current channels than provided by the CMC test sets. Omicron CMC256-6 Universal Relay Test Set OMI,CMC256-6 (4660) AU Protection relay test set and universal calibrator (energy meters, measuring transducers, power quality measurement devices, phasor measurement units etc) with six current sources (6 x 12.5A, 3 x 25A or 1 x 75A), four voltage outputs (4 x 300V or 1 x 600V), 4 x binary outputs, 10 x multifunctional binary inputs (dry/wet) and Generator Combination Cable for wiring convenience. The six current and four voltage output channels are continuously and independently adjustable in amplitude, phase and frequency. All outputs overload and short-circuit proof. LLO-2 option not included. Laptop included, preloaded with Test Universe software (Universal). Optional accessories: OMI,CMA156-6PCA OMI,CMGPS. Electrical Powerwww.techrentals.com.au
  • 37. 36 Protection Relay Testing Systems cont’d. Omicron CMC 256plus Universal Relay Test Set OMI,CMC256PLUS (4661) AU Improved accuracy specifications. Protection relay test set and universal calibrator (energy meters of class 0.2, measuring transducers, power quality measurement devices, phasor measurement units) with 6 current sources (6 x 12.5A, 3 x 25A or 1 x 75A), 4 voltage outputs (4 x 300V or 1 x 600V), 4 x binary outputs, 10 x multifunctional binary inputs (dry/wet) and Generator Combination Cable for wiring convenience. The 6 current and 4 voltage output channels are continuously and independently adjustable in amplitude, phase and frequency. All outputs overload and short-circuit proof. LLO-2 option not included. Laptop included, preloaded with Test Universe software (Universal). Optional accessories: OMI,CMA156-6PCA Omicron CMC 356 Advanced Protection Relay Test Set OMI,CMC356 (4656) AU Protection relay test set with 6 current sources (6 x 32A/430VA, 3 x 64A/860VA or 1 x 128A/1000VA), 4 voltage outputs (4 x 300V or 1 x 600V), 4 x binary outputs, 10 x multifunctional binary inputs (dry/wet) and Generator Combination Cable for wiring convenience. The 6 current and 4 voltage output channels are continuously and independently adjustable in amplitude, phase and frequency. All outputs overload and short-circuit proof. Laptop included, preloaded with Test Universe software (Advanced Protection + Transducer). Optional accessories: OMI,CMA156-6PCA OMI,C-PROBE1 OMI,CMGPS Omicron CMC 356 Advanced Protection Relay Test Set +61850 OMI,CMC356_61850 (4657) AU Protection relay test set with 6 current sources (6 x 32A/430VA, 3 x 64A/860VA or 1 x 128A/1000VA), 4 voltage outputs (4 x 300V or 1 x 600V), 4 x binary outputs, 10 x multifunctional binary inputs (dry/wet) and Generator Combination Cable for wiring convenience. The 6 current and 4 voltage output channels are continuously and independently adjustable in amplitude, phase and frequency. All outputs overload and short-circuit proof. Includes IEC61850 software package (GOOSE, Sampled Values, IEDScout, SVScout). ELT-1 and LLO-2 options not included. Laptop included, preloaded with Test Universe software (Advanced Protection + Transducer) and IEC61850 package. Optional accessories: OMI,CMA156-6PCA OMI,C-PROBE1 OMI,CMGPS Omicron CMGPS Syncronisation Control Unit OMI,CMGPS (4662) AU Optional accessory for use with any OMICRON CMC test set. Included are two GPS unit which provide a start signal pulse based on the GPS clock time base. Software is integrated in the testing modules (State Sequencer). Can also be used as a stand-alone application. Omicron C-Probe-1 Clamp-on CT AC/DC OMI,C-PROBE1 (4664) AU Optional accessory for OMI,CMC356 & OMI,CMC356_61850. An active AC and DC current probe with voltage output. Recommended accessory for measuring currents with the CMC356. It has 10A and 80A measuring ranges, frequency range DC to 10kHz. Accuracy error < 2% for currents up to 40A and frequencies up to 1kHz. Phase error <0.50 @ 50/60Hz. Length 230mm. Output: 0-10A range 100mV/A, 0-80A range 10mV/A. Megger (Programma) Sverker760 Relay Test Set PRO,SVERKER760 (4672) AU Relay test set for 1ph protective relay equipment. Three phase relays can be tested 1 phase at a time or by synchronising more than one unit. Current ranges to 100A with full load current to 250A. AC outputs to 250V & DC outputs to 300V. In-built capacitor and resistors for current output phase shifting (3,600). In-built timer, ammeter, and voltmeter. Measures phase angle, PF, and impedance.RS232 communications and control interface. AC Sources/Inverters/Generators Chroma 61501 Programmable AC Power Source CHR,61501 PAC-PS (6400) AU Power: 500VA. Voltage: 0-150V/0 to 300V/AUTO. Compact size and weight attributable to advance PWM technology. AC, DC, AC+DC output mode. Programmable output impedance for IEC 61000-3-3. IEC 61000-4-11 voltage dips and variation simulation. Harmonics, inter-harmonics waveform synthesizer for IEC 61000-4-13 testing. Power line disturbance simulation capability. Programmable voltage, current limit. Comprehensive measurement capability, including current harmonics. High output current crest factor, ideal for inrush current testing. Turn on, turn off phase angle control. TTL signal which indicates output transient. Software for IEC regulation test. Analog programmable interface. Optional GPIB and RS232 interface. Power Transformers & Variacs Dimmer Dot 0-270V AC, 17A Variac DIM,D201P (8230) AU Single phase variac. 240 V AC input, 0-270V AC output at 17A. Input and output connections must be wired up under a protective cover. Variac 6500-3 3ph 6.5kVA Transformer VAR,6500-3 (8228) AU Variac 3ph 6.5kVA. 0 to 470VAC output for 415VAC input, max current 8A/ph. Dimmer Dot Variable AC Voltage Auto Transformer 3 Phase 23-28A VAR,D-283-OB (8229) AU Manual operated air cooled; Input 400/415V, 50Hz. Output 0 to 415/470V. 23 to 28A. Total Weight 95kgs. Battery Management Systems Hioki Battery HiTester HIO,3551BATTERYTEST (8275) AU Takes on-the-spot measurements of the internal resistance, voltage and temperature of lead-acid batteries, principally for UPS and similar applications, without needing to shut off the battery. Instantaneous results, on a three-rank scale of Pass, Warning, or Fail, using a composite decision based on the internal resistance and the voltage. Resolution of 1μΩ, necessary for high capacity batteries (of at least 500Ah). Includes Hioki 9460 clip type temperature leads. Megger Torkel 840 Battery Load Unit PRO,TORKEL-840 (8276) AU Portable (22 kg, 38 kg with accessories and transport case) battery discharge load unit. Works with 12V to 250V battery systems and can discharge at up to 110A (15kW maximum power). Can be programmed for constant current, constant power, constant resistance or user defined load profiles. The included DC current clamp allows on-load testing. Tests can be PC controlled and results reviewed using the included TORKEL Win software. The load current can be extended with the optional accessory PRO,TXL870 extra load unit. Megger (Programma) TXL870 Extra Load Unit PRO,TXL870 (8277) AU Optional accessory for the PRO,TORKEL-840 battery load unit. Adds up to an extra 112A load capacity to a discharge test (15.8kW maximum). Operates as a slave in combination with a PRO,TORKEL-840 battery load unit. Electrical Power www.techrentals.com.au
  • 38. 37 Save your time and reduce your costs by using our data management services. Learning to operate unfamiliar equipment costs you time and can lead to fundamental errors in data capture processing. There is a better solution - our setup and download service. Our technical staff are equipped and trained to deliver you the downloaded data in a range of suitable output formats including USB drive, CD-ROM, printout, chart and DVD according to your need and the product’s functionality. When you nominate your output preferences and appropriate technical information, the rest is taken care of. The completed files or printouts will be forwarded to you quickly or may be collected at an arranged time. The equipment marked with ‘S’ symbol is available to rent with this service. Fees vary depending on the complexity of operation and the level of detail involved. Data management services are available for many products. Below are some examples of what you can expect. SEWARD ProTag Optima 300 Testing & Tagging System (SEW,PT-300) Setup: • Load logo file in printer • Load test settings Results Downloaded: • Provide database in PATGuard format • Provide CD with PATViewer software including database for end customer FLUKE DTX1800 Cable Analyser (FLU,DTX1800) Setup: • Company name • Site • Tester • Setup of certification test limit • Cable type Results Downloaded: • Raw Fluke Linkware files • Linkware software • PDF report of results FLUKE Ti25 Thermal Camera (FLU,TI25) Results Downloaded: • Raw image files • Relevant editing software • Adjust isotherm and emissivity • Standard report of images CHK PM30/ PM30PLUS - 3CTs Power Quality Analyser [Note: Max current is 1000A for PM30] CHK PM40/ PM45 - 4CTs Power Quality Analyser (CHK,PM30) Setup: • 3P4W(star) or 3P3W(delta) • Max. Current (<1000A or <3000A) • 3P Current only or 3p and Neutral • Log Period and Log Interval • Log Profiling (V,I,PF,kWh,THD) • Event Capture (Sag,Swell,Transient) • Start Log Next Power up Results Downloaded: • Raw Data • PowerView Software • PDF report of V & I Trend Graph • Total kWh Calculation • Exported Data as CSV or Excel files FOURIER DAQPRO Hand-Held Data Logger (FOU,DAQPRO-2) Setup: • How many channels to be measured (Out of 8 channels) • Each channels measurement. eg Voltage - Current etc • Channel scaling • Period of logging to determine logging interval • Logging Interval Results Downloaded: • Data results • DAQPRO viewing software and editing SETUP AND DOWNLOADwww.techrentals.com.au
  • 39. 38 Temperature Meters/IR Thermometers Infrared Thermal Imaging Cameras Endoscopes Borescopes Visual Inspection High Speed Video Inspection Cameras Tachometers/Stroboscopes Laser Rotational Shaft Alignment Industrial Process Calibrators Wet & Dry Block & Calibrators Strip Chart Recorders High Speed Waveform Recorders Data Loggers Pressure & Humidity Transducers Pressure Vacuum Gauges/Recorders Flow Meters for Liquids & Gases Combustion, Flue & Industrial Gas Analysers Environmental Test Chambers/Ovens Ultrasonic Baths Temperature Meters/ IR Thermometers Fluke 52-2 Digital Thermometer FLU,52-2 MY Dual input thermocouple thermometer supplied with two K type thermocouples for differential measurements. Sampling rate of 1Hz (1 probe) or 1.7Hz (2 probes). Will continuously record max and min measurements. It also can take K,J,T and E type Thermocouple inputs. Temperature range: K type: -200°C to 1,372°C. Fluke 54-2B 2 Channel Data Logging Temperature Meter with FlukeView FLU,54-2B-FVF (4507) AU Dual input digital thermometer with data logging. Will take most TC inputs. Accuracy ±0.05% of reading +0.3ºC. 500 point logging with date & time stamp. Also records min, max or avg. Logged data can be reviewed on meter or downloaded to PC using software included. Supplied with 2 x 400mm K type thermocouple leads. Fluke 80TK Thermocouple Module FLU,80TK (4531) AU Use with DVM’s and recorders. Accepts K thermocouples. Temperature range -50 to 1,000ºC. Output 1mV/ºC. Type 80KP-1 probe included. General Industrial & Process Management www.techrentals.com.au Now all the thermal imagers in the Ex, Exx and T-Series ranges come standard with FLIR’s patented MSX® technology for extremely sharp, detail-rich imaging. Across the entire FLIR range, innovative features are standard including built-in visual camera, Wi-Fi and Bluetooth. Connect to smart phone or tablet via Wi- Fi for processing and sharing results as well as for remote control. With prices starting from as little as $1639 inc GST, FLIR’s Ex-Series range sets a new benchmark in feature-packed thermal imaging technology at very affordable prices. And now FLIR’s Exx-Series offers even more with the addition of MSX® and auto orientation. Designed for entry-level users who want to get the most out of their thermal imaging camera, the FLIR Ex and Exx ranges are perfect for electrical and mechanical inspections, HVAC, plumbing and building diagnostics. The T-Series remains FLIR’s most flexible and professional grade handheld thermal camera in the range and leads the field in image quality, ergonomics and user-friendly features like image sketch directly onto LCD touchscreen, voice annotation and tilt lens. Local Service Network Who else would you trust to calibrate and service your FLIR camera but FLIR Australia? As a factory certified service centre it makes perfect sense. As most FLIR thermal cameras are eligible for FLIR’s industry leading 2-10 product and detector warranties* buying a FLIR is an easy decision. Experience the world of thermal imaging. The result? Faster detection. Detailed analyses. Faster conclusions. FLIR Systems Pty Ltd. VIC: 03 9550 2800 NSW: 02 8853 7870 WA: 08 6263 4438 Tel AU: 1300 729 987 NZ: 0800 785 492 Email: info@flir.com.au www.flir.com ISONo.FLIR20850Disclaimer:Imagesforillustrativepurposesonly.Specificationssubjecttochangewithoutnotice. Ex-Series Exx-Series T-Series
  • 40. Temperature Meters/ IR Thermometers cont’d. Fluke 576 Photographic Temperature Infrared Thermometer Built in Camera FLU,576 (4519) AU/MY Range -30 to 900ºC. Minimum measurement 19mmØ, laser class II, 3 point spot. Includes adjustable emissivity from 0.1 to 1 by 0.01. Target size 1/60 of distance. Max, min, dif and av displayed on backlit lcd with bar graph. Data output USB or 1mV/ºC, Windows software and cable included. Accuracy ±0.75% of reading or ±1ºC whichever is greater. Response time 250ms. Display resolution 0.1ºC. Continuous measure mode. Digital camera and flash built in. Fluke 1523 NATA Precision Handheld Thermometer FLU,1523-NATA (4514) Precision, portable, electronic thermometer with trending and 25 memory positions for NATA-traceable calibration and high accuracy. Includes 5616 probe 298mm x 6.35mm 100Ω platinum resistance thermometer probe (PRT) -200 to 420°C, stability ±10mK, accuracy ±0.012°C at -200°C, ±0.011°C at 0°C, ±0.028°C at 420°C. Temperature Meters/ IR Thermometers cont’d. Testo 845 IR Thermometer with Humidity Probe and T/C Probe TES,845 (4527) AU Temperaturemeasurement-35to950°C.Relativehumidity probe 0 to 100%RH. Fast-action surface probe with sprung thermocouple strip, also for uneven surfaces. Switchable optical resolution: far field: 75:1 (16mm at a distance of 1200mm). Close focus: 1mm at a distance of 70mm. Adjustable emissivity from 0.1 to 1, max, min, displayed on backlit LCD. Continuous measure mode. Data output software and cable included. Accuracy ±0.75% of reading 100 to 950°C. Display resolution 0.1°C. Infrared Thermal Imaging Cameras Flir E60 Infrared Thermal Image Camera FLI,E60 (4550) AU/MY -20°C to 650˚C, IR resolution 320x240, 60Hz, visual image 3mpix, built in LED lamps, laser locator, scalable picture in picture. MPEG4 recording, touch screen, composite video out, Wi-Fi, and USB. Infrared camera applications include electrical distribution, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc), product development, HVAC/R, automotive. Bluetooth support for voice annotations and selected Extech equipment. PC software provided. iPhone/iPad app available. General Industrial & Process Managementwww.techrentals.com.au New items are being added to the inventory constantly, so if you do not see what you are looking for please call 1800 632 652.
  • 41. 40 Infrared Thermal Imaging Cameras cont’d. Fluke Ti32 Infrared Thermal Image Camera FLU,TI32 (4559) AU/MY -20°C to 600°C, resolution 320x240. Infrared camera applications include inside and outside electrical distribution, motors, pumps, generators, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc). Process industry tanks/vessels, pipes, valves, traps, reactors, and process insulation, HVAC/R. Fluke Ti32 Infrared Thermal Image Camera FLU,TI32_WIDE-ANGLE MY Field swappable, wide angle thermal lens allows the user to have a wider field of view for working in tight spaces, small rooms, etc. Field-of-View (FOV) is 46° x 34°. For use with the Ti32 and TiR32. Fluke Ti32 Infrared Thermal Image Camera with Telephoto Lens FLU,TIR32 TELEPHOTO (4560) AU Iinfrared thermal imaging camera. -20 to 600°C, resolution 320x240. Applications include inside and outside electrical distribution and transmission infrastructure, motors, pumps, generators, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc). Process industry; tanks/vessels, pipes, valves, traps, reactors, HVAC/R. Includes detachable telephoto lens, field-of-View (FOV) 11.5° x 8.7°. Infrared Thermal Imaging Cameras cont’d. Flir T390 Infrared Thermal Image Camera FLI,T390 (4556) AU Infrared thermal imaging camera. -20°C to 1,200°C. MPEG 4 video recording and composite out, is suitable for almost any application such as electrical surveys, building diagnostics and mechanical inspections. With a 3.5 inch touch screen, Fusion functionality, auto and manual focus, target illuminator, laser locator and voice text annotation. 50Hz refresh rate, IR Resolution 320 x 240, visible light camera 3.1 MP. Fluke Ti25 Infrared Thermal Image Camera FLU,TI25 (4567) AU/MY Temperature range -20°C to 350°C, IR resolution 320x240, 60Hz, visual image 3mpix, built in L, accuracy ±2°C or 2% (whichever is greater). Manual focus. SD memory card (2GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60s voice annotations or 3,000 basic (.bmp) IR images). Infrared camera export file formats JPEG, BMP, GIF, P, TIFF, WMF, EXIF, and EMF. IP54 rating. General Industrial & Process Management www.techrentals.com.au Uptime or Downtime. YOUR RESULTS MATTER. Only the NEW infrared cameras from Fluke have LaserSharpTM Auto Focus for consistently in-focus images. EVERY. SINGLE. TIME. 4040404040404004040404040404444404040404004 UUUUUpppptttttiiiiimmmmmeeee oooorrrrr DDDDDooooooowwwwwwwwnnnnnnnnnnttttttttiiiiiiiiiiimmmmmmmmmmmeeeeeeeeeeeeeee..... YYYYOOOOOOOUUUUUURRRRRRR RRRRRRREEEEEEEESSSSSSSSSSUUUUUUUUUUUUUUUULLLLLLLLLLLLLLLTTTTTTTTTTTTTTTTTTTSSSSSSSSSSSSSSS OnOnlylyyy ttthehehehe NNNNNNEWEWEWEWEWEWWWWW iiiiiiiiinfnfnfnfnfnfnffrararaaaraarerererererer ddddddddd cacacacacacacacaac mmememememeememem rarararaaaraarrrr ssss frfromm FFFlululuukekekeke hhhhhhhhhavavavavavaaa eeeee LaLaLaLaLaaasesesesesess rSrSrSrSrShahahahahahaarprprprprprpr TMTMTTMTMTM Autoo FFFococusususus ffffororor cccccoononononnsisisiisisiistststststs enenene tltlt yyyyy in-foccoo usuus iimamamamaggegegeeeeees.s.s.s.s.s.s.s EEEVVVEERRYY.. SSSSIIIIINNNNNNNGGGGGGGGGLLLLLLLLLEEEEEEEEEE...... TTTTTTTTTTTTTTTIIIIIIIIIIIIIMMMMMMMMMMMMMMMMEEEEEEEEEE.......
  • 42. 41 Endoscopes Borescopes Visual Inspection See also Pipeline & Cavity Inspection on page 61-62 Fibrescope MTFS15-1000 1.5mm x 1m Endoscope FIB,MTFS15-1000 (5168) AU Working length 1,000mm x 1.5mmØ. Includes light source. Operating temperature -20 to 60ºC at atmospheric pressure. Moritex PalmScope Video Capture Device for JPEG & Movie Clip Recorder Inspection MOR,PALMSCOPE (5186) AU Digital Video Recorder, image capture and storage. Used in conjunction with an endoscope, borescope or videoscope the PalmScope is an alternative to a VCR for onsite inspection applications. Unit records, store video sequences and full frame resolution jpeg images on supplied 512Mb Compact Flash Card. View images on built in 6.4” TFT LCD screen. Stores jpeg still images and or mjpeg movie clips. Signal input video NTSC or PAL, auto-selecting. Olympus IPLEX-LT 7.5 Portable Industrial Videoscope OLY,IPLEX-LT 7.5 MY Lightweight, 2.7kg out of transit case. 8mm diameter, 7.5m length tungsten insertion tube with LED illumination and comes with 6.5 inch TFT display. 4 way, 140° articulation. Still and movie recording to USB flash. IP55 compliant. Applications include inspection of, heat exchangers, turbines, gearboxes, automotive parts and aircraft. Olympus IPLEX LT 3.5m Portable Industrial Videoscope OLY,IPLEX-LT 3.5 (5198) AU Lightweight, 2.7kg out of transit case. 8.5mm diameter, 3.5m length tungsten insertion tube. 4 way, 140° articulation. Still and movie recording to USB flash. IP55 compliant. Applications include inspection of, heat exchangers, turbines, gearboxes, automotive parts and aircraft. Olympus IPLEX-LX Portable Industrial Videoscope OLY,IPLEX-LX MY Battery powered industrial videoscope, lightweight 2.7kg out of transit case. 4mmØ, 3.5m length tungsten insertion tube, articulation 4 way up/down/left/right 120°. Field of view 120°, depth of field 18 to 1,000mm, illumination method LED. Brightness adjustment and digital zoom, built in 6.5 inch TFT colour display, record JPEG images and video to USB flash device. RCA composite video output. Battery or AC powered. Olympus IPLEX- MX II Portable Industrial Videoscope OLY,IPLEX-MXII (5179) AU Battery powered industrial vidoscope, lightweight, just 2.5kg out of transit case. 6mmØ, 3m length tungsten insertion tube, articulation 4 way UP/DOWN/LEFT/RIGHT 120º. Field of view 120º, depth of field 18 to 1000mm, illumination method LED. Brightness adjustment and digital zoom, built in 6.5” TFT colour display, record JPEG images to USB flash device. RCA composite video output. Battery or AC powered. Endoscopes Borescopes Visual Inspection cont’d. RF Systems VJ-ADV Articulating 3.9mm Video Borescope RFS,VJ-ADV (5184) AU Video borescope is 3.9mm in diameter and 1.5 meters long with a flexible stainless steel braided insertion tube with adjustable brightness and 90 degree 4 way articulation. Images and video can be captured and saved to a micro SD card. Applications include turbine inspection, heat exchangers, gearboxes in automotive or electrical power generation, chemical, oil and gas vessel inspection. High Speed Video Inspection Cameras Olympus High Speed Camera OLY,ISPEEDLT (5217) AU High speed video camera including stand and lighting accessories. 800x600 color resolution at 1,000fps. Maximum frame rate 2,000fps. 2.24sec recording time color camera. 4 x lens kit supplied. Maximum shutter speed 5us. Tachometers/Stroboscopes Hioki 3404 Optical/Contact Tachometer HIO,3404 (5211) AU/MY Autoranging 4 digit display. Ranges in RPM mode 30 to 99.9, 1,000 to 9,999 & 1,000 to 9,999 x 10. Ranges in RPS mode 0.5 to 99.99, 100 to 999.9 & 1,000 to 1,600. Analogue output 1mV/10RPM or 1mV/100RPM, accuracy 4%. Tripod mounting. Internal battery or external AC operation. Contact adaptor included with cone and peripheral ring. Monarch Palmstrobe Compact Size Portable Stroboscope MON,PALMSTROBE (5208) AU Compact size portable stroboscope, flash rate from 100 to 12,500FPM, 6 digit alphanumeric backlit LCD. Tachometer range 5 to 250,000RPM (only with external sensor connected, not included). External sensor input TTL only. Supplied with 2 x removable rechargeable battery packs, charger and transit case. Monarch Phaser Strobe Battery Operated MON,PHASER (5206) AU Phaser-stroboscope includes optical and magnetic pickup. Operates from internal re-chargable batteries or mains. Auto step mode provides slow motion appearance for high speed repetitive events. Stores and recalls last 3 full settings in memory. Specifications: 30 to 30,000 fpm or 0.5-533.33 fps. Accuracy ±0.01%. Flash rate external triggering: 30 to 9,999.9 fpm, 0.5 to 533.33 fps, 10,000 to 32,500 fpm. Phase delay facility. Monarch PLT200-KIT Digital Contact/Non Contact Tacho MON,PLT200-KIT (5214) AU Hand held digital contact/non-contact tacho kit. Ranges optical/non-contact 5 to 200,000 RPM, contact 0.5 to 20,000 RPM. Display 5 digits, 5 alpha numeric LCD. Non contact operating range 90cm, tripod mounting. Direct contact tips and contact wheel supplied. Programmable for IPM, FT/M, YPM, cm/M, m/M, RPM, RPS, RPH and Totaliser up to 200,000. Output TTL pulse. General Industrial & Process Managementwww.techrentals.com.au Follow TechRentals on LinkedIn http://linkedin.com/company/techrentals
  • 43. 42 Laser Rotational Shaft Alignment Fixturlaser Dirigo Laser Bases Shaft Alignment System FIX,DIRIGO (4940) AU Measurement resolution to 0.01mm Shaft diameter range 40 to 150mm using an extension chain 150 to 500mm. Maximum distance between measurement units 0.85m. Very simple to use and operate as shims are applied the alignment can be monitored in real time. 20h of operation from alkaline batteries. Fixturlaser PAT Pulley Alignment System FIX,PAT (4941) AU Laser based alignment system for pulley systems. Measurement accuracy 0.5mm (0.2º). 20hrs of operation on AAA batteries. Mechanically self centres on pulley, will operate successfully even on worn pulley systems. MCE Pipe Laying Laser Alignment System MCE,LS140G (4942) AU Pipe laying laser alignment system. Simple system for setting pipe grades. Applications include sanitary and storm sewers, tunnelling and Pipe Jacking. It includes a remote to adjust the grade and left right alignment. Kit includes target, remote and legs for different pipe sizes etc. This system uses the Green laser wich is considerably brighter than a red laser. Pruftechnik Rotalign Pro Laser Shaft Alignment Ex PRU,ROT-PROEX (4943) AU Intrinsically safe laser based rotating shaft alignment system. Maximum separation between emitter and receiver 10m. Aligns horizontal and vertical machines, aligns coupled and uncoupled shafts equally well. Pruftechnik Rotalign Ultra Laser Shaft Alignment PRU,ROT-ULTRA (4945) AU Laser based rotating shaft alignment system. Maximum separation between emitter and receiver 10m. Aligns horizontal and vertical machines, aligns coupled and uncoupled shafts equally well. Ultra modern computer design, backlit colour display, Intel XScale 400MHz CPU, USB for peripheral devices, PC, printer, also Bluetooth communication. Backlit keyboard, rechargeable Li-Ion battery pack. Machine train alignment - 14 machines. Alignment results in 3 quick steps, thermal growth computation. Rotalign Ultra Reader software included. Pruftechnik 1500mm Length Tension Chains PRU,AL12.116 (4946) AU 1500mm length tension chains for PRU,ROT-ULTRA. Industrial Process Calibrators Ametek PPCE 700 Bar Pressure Calibrator AME,PPCE MY High pressure calibrator with pump 700 Bar (10,000psi). Digital display with 5 digit resolution. Accuracy over 70 Bar ±0.07. Accuracy below 70 Bar ±0.35. Current and voltage measurement ranges 4 to 20mA, 0 to 50mA & 0 to 30V. Industrial Process Calibrators cont’d. Beamex MC5 Multifunction Calibrator NATA Certified BEA,MC5 (4731) AU NATA certified MC5 provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and CMX light software provided. Calibration results can be stored or printed. Performs as a field-entry device (FED) allowing for the recording of non-calibration related maintenance results. Pressure modules included, -1 to 20 Bar and 600 Bar (up to 1,000 Bar with optional external transducers). DC voltage & current, frequency, and pulse measurement. RTD, thermocouple, and resistance simulation & measurement. Beamex MC5-IS Multifunction Calibrator NATA Certified BEA,MC5-IS (4732) AU/MY NATA certified MC5-IS provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and CMX light software provided. Calibration results can be stored or printed. Performs as a Field-Entry Device (FED) allowing for the recording of non-calibration related maintenance results. Pressure measurement range, -1 to 20 Bar and 600 Bar (up to 1,000 Bar with optional external transducers). DC voltage and current, frequency, and pulse measurement. RTD, thermocouple, and resistance simulation and measurement. Beamex MC6 Advanced Field Calibrator BEA,MC6 (4727) AU NATA certified MC6 provides calibration capability for pressure, temperature, electrical and frequency signals. HART communication and CMX light software provided. Calibration results canbestoredorprinted. Performsasafield-entrydevice(FED)allowingforthe recording of non-calibration related maintenance results. Pressure modules included, -1 to 20 Bar and 600 Bar (up to 1,000 Bar with optional external transducers). DC voltage & current, frequency, and pulse measurement. RTD, thermocouple, and resistance simulation & measurement. Colour touch screen. Crystal nVision Pressure Calibrator 30 Bar IS NATA CRY,NVISION-30-NATA (4757) AU Intrinsically safe pressure calibrator. Displays real-time recorded data graphically on a high res screen with ability to zoom into specific events. 500,000 data point memory records all data from all enabled screens from two modules simultaneously. Fastest logging interval 10 readings/sec. Configured with MA20 current, voltage and switch test module and 30 Bar pressure module, accuracy to 0.025% of reading. Includes hand pump and CPF (finger tight to 700 Bar) fittings. Crystal XP2i 15psi (1 Bar) NATA with Druck PV411 Hand Pump CRY,XP2I CAL KIT 1 (4735) AU 15psi (1 Bar) pressure gauge and Druck PV411 hand pump calibration kit. Nata certified accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards. General Industrial & Process Management www.techrentals.com.au
  • 44. 43 Industrial Process Calibrators cont’d. Crystal XP2i 100psi (7 Bar) NATA with Druck PV411 Hand Pump CRY,XP2I CAL KIT 7 (4743) AU 100psi (7 Bar) pressure gauge and Druck PV411 hand pump calibration kit. Nata certified accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards. Crystal XP2i 5,000psi (345 Bar) NATA with Druck PV411 Hand Pump CRY,XP2I CAL KIT 345 (4765) AU 5,000psi (345 Bar) pressure gauge and Druck PV411 hand pump calibration kit. Nata certified accuracy, ±0.1% of reading between 20 to 100% of full scale, ±0.02% of full scale between 0 to 20% of full scale. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards. Druck DPI603 2-NATA 2 Bar Pressure Calibrator DRU,DPI603-2-NATA (4738) AU DRU,DPI603-2 MY 0.075% FS Accuracy includes pump for vacuum and pressure. Unit will pump up to 2 Bar pressure and -850mBarvacuum. Measurementscanbemadeto2Bar positive pressure and -1Bar vacuum. The unit has a 24V energising voltage. Monitors loop current to 55mA DC loop voltage to 50V. Sealed to IP65. Rechargeable battery operated. Unit can display in 24 different units. BSP 1/8 interface. Druck DPI603 20 Bar Pressure Calibrator DRU,DPI603-20 MY Accuracy 0.075%fs. Pumps up to 20 Bar pressure & -850mBar vacuum. Measures up to 20 Bar pressure and -1 Bar vacuum. In-built 24V energising voltage. Monitors loop current to 55mA. Loop voltage to 50V. Interface 1/8” bsp. Battery operated. Druck DPI104 350 Bar Pressure Calibrator & HTP1 Hydraulic Pump DRU,DPI104-350 MY Range 0 to 350 Bar. Measures 0 to 100mV (1μV resolution), 0 to 5V (0.1mV resolution), 0 to 50V (1mV resolution) & current 0 to 50mA (1μA resolution) all @ 0.025% accuracy. Sources 0 to 10V (0.2mV resolution) & 0 to 50mA (1μA resolution) @ 0.025% accuracy. Voltage output regulated 10V ±0.1% current 30mA & unregulated supply 24V ±10% current 50mA. Pressure switch status. Pressure media oil, water & non corrosive gases. Battery operation 10h or mains operation via charger. Complete with a full range of pressure connection adaptors. Druck DPI610-2-NATA 2 Bar Pressure Calibrator DRU,DPI610-2-NATA (4737) AU DRU,DPI610-2 MY Pneumatic pressure calibrator including pump and current voltage standard. Pressure range -1 to 2 Bar, ±0.025%fs. Voltage input ±50VDC, ±0.05%rdg, ±0.004%fs. Current input ±55mA, ±0.05%rdg, ±0.004%fs. Temperature -10 to 40°C, ±1 (ambient) switch open/closed. Voltage output 10VDC, ±0.1% or 24V ±5%. Current output 0 to 24mA ±0.05% rdg ±0.01%fs. Data logger stores up to 10,000 values. mA ramp configurable. Pressure port G 1/8” (f), includes flexible hose kit. Pump includes screw adjustment. Industrial Process Calibrators cont’d. Druck DPI610-20-NATA 20 Bar Pressure Calibrator NATA Certification DRU,DPI610-20-NATA (4751) AU DRU,DPI610-20 MY Pneumatic pressure calibrator including pump and current voltage standard. Pressure range -1 to 20 Bar ±0.025%fs. Voltage input ±50VDC, ±0.05%rdg, ±0.004%fs. Current input ±55mA, ±0.05%, rdg ±0.004%fs. Temperature -10 to 40°C ±1°C (ambient) switch open/closed. Voltage output 10VDC ±0.1% or 24V ±5%. Current output 0 to 24mA ±0.05% rdg ±0.01%fs. Data logger stores up to 10,000 values. mA ramp configurable. Pressure port G 1/8f, includes flexible hose kit. Pump includes screw adjustment. Druck DPI610-400-NATA 400 Bar Pressure Calibrator DRU,DPI610-400-NATA (4768) AU DRU,DPI610-400 MY Hydraulic pressure calibrator including pump and current voltage standard. Pressure range 0 to 400 Bar ±0.025%fs. Voltage input 50VDC, ±0.05%rdg, ±0.004%fs. Current input 55mA, ±0.05%rdg, ±0.004%fs. Temperature -10 to 40ºC ±1ºC (ambient) switch open/closed. Voltage output 10VDC ±0.1% or 24V ±5%. Current output 0 to 24mA, ±0.05% rdg, ±0.01%fs. Data logger stores up to 10,000 values. mA ramp configurable. Pressure port G 1/8” (f), includes flexible hose kit. Pump includes screw adjustment. Druck DPI615-20-NATA 20 Bar Pressure Calibrator DRU,DPI615-20-NATA (4750) AU Pneumatic pressure calibrator including pump and current voltage standard. Pressure range 0 to 20 Bar ±0.025% FS. Voltage input ±50VDC ±0.05% rdg ± 0.004% FS. Current input ±55mA ±0.05%rdg ±0.004%FS. Temperature -10 to 40ºC ±1ºC (ambient) switch open/closed. Voltage output 10VDC ±0.1% or 24V ±-5%. Current output 0 to 24mA ±0.05%rdg ±0.01%FS. Data logger stores upto 10,000 values. mA ramp configurable. Pressure port G 1/8 female, includes flexible hose. Pump includes screw adjustment. Druck PV411A Multifunction Hand Pump Kit DRU,PV411A (4789) AU/MY Provides up to 700 Bar hydraulic, 40 Bar pneumatic pressures and vacuum to -950mBar. Built-in stroke adjuster, lower pressure fine control and tamper proof overpressure protection. Druck UPS III-IS Intrinsically Safe Loop Calibrator DRU,UPS III-IS (4777) AU Measure or source 0 to 24mA and provide 24V loop power. 50 VDC measurement and continuity. Accuracy 0.015% of reading, Hart compatible. Dual mA and % readout, linear or flow. It is an essential tool for loop testing, instrument maintenance and valve set-up, with an easy-to-read display and simple-to-use time saving features. Emerson Process Management 375 Field Communicator EME,375 (4795) MY Will configure, test, and diagnose your HART® and Foundation FieldBus devices. Able to communicate with any device, by any manufacturer. Intrinsically safe. Easy upgrade over the Internet. Interfaces with AMS PC Suite Software. Emerson 475 Hart Communicator EME,475 (4794) AU/MY Will configure, test, and diagnose your HART® and Foundation FieldBus devices. Able to communicate with any device, by any manufacturer. Intrinsically safe. Easy upgrade over the Internet. Interfaces with AMS PC Suite Software. General Industrial & Process Management www.techrentals.com.auGeneral Industrial & Process Management www.techrentals.com.auGeneral Industrial & Process Managementwww.techrentals.com.au
  • 45. 44 Industrial Process Calibrators cont’d. Softing BC-600-PB Profibus Tester 4 SOF,PROFIBUS-4 (4723) AU Allows full testing of live PROFIBUS segments with minimum influence on their operation. Detects transient faults that occur sporadically. Test for non operation PLCs or suspicious devices. Simultaneous analysis of both bus physics and bus communication. Master simulator and Topology scan. Expert tests: frame, oscillogram analysis and trigger input/output. Long term trend measuring, preventive maintenance and detailed test reporting. Fitting Set with 700 Bar Hose FIT,HP MY Fitting set (max pressure = 10,000psi) for pressure calibrators. Female connector sizes: 1/4 inch BSP & NPT; 1/8 inch BSP & NPT; 3/8 inch BSP & NPT; 1/2 inch BSP & NPT. Fitting Set With 20 Bar Hose FIT,LP MY Fitting set (max pressure = 10,000psi) for pressure calibrators. Female connector sizes: 1/4 inch BSP & NPT; 1/8 inch BSP & NPT; 3/8 inc BSP & NPT; 1/2 inch BSP & NPT. Fluke 70 Bar Pressure Transducer to suit Fluke Calibrators 725 & 744 FLU,700P08-70BAR (4762) AU For use with the Fluke 744 & 725 industrial calibrators. Pneumatic system range 0 to 70 Bar, resolution 7mBar, reference uncertainty 0.025%. Connection 1/4 NPT and 1/4 ISO. Includes 700PTP-1 pressure pump. (Note the pump will operate to 41 Bar). Fluke 690 Bar Pressure Transducer to suit Calibrators 744 & 725 FLU,700P31-690BAR (4771) AU For use with the Fluke 744 & &25 industrial calibrators. Range 0 to 690 Bar, reference uncertainty .025%. Connection 1/4NPT and 1/4 ISO. Includes 700HTP-1 pressure pump. Fluke 7 Bar Pressure Transducer & Pump to suit FLU,744 & FLU,725 FLU,700PD6-7BAR (4745) AU For use with the Fluke 744 & &25 industrial calibrators. Range 100 to 690kPa, reference uncertainty .025%. Connection 1/4 NPT and 1/4 ISO Includes 700LTP-1 pressure pump. Fluke 718 300G Pressure Calibrator FLU,718-300G (4755) AU Pressure source and milliamp measurement. Pressure specs -83 to 2068kPa ±0.05% of range. Max pressure 2.6MPa. Current specs: 0.0001mA resolution, accuracy 0.015%. Calibrate P/I (pressure to current) transmitters, measures pressure via a 1/8 inch NPT pressure fitting and an internal pressure sensor, source pressure, measure current up to 24mA, simultaneously display pressure and current measurements, supplies loop voltage, calculates percentage in percent mode, calculates mA error in percent error mode. Fluke 719 2 Bar-30G Pressure Calibrator including Electric Pump FLU,719-30G (4740) AU 2Bar, includes pump and precision 4 to 20mA measurement and source capability. The pump in this instrument is electric. Uncertainty 0.025%. Precision pressure adjustment vernier. Range -850mBar to 2Bar. Resolution 0.1mBar. 4 to 20mA resolution .001mA .015%rdg + 2 counts. Industrial Process Calibrators cont’d. Fluke Pressure Calibrator 8Bar includes Electric Pump FLU,719-100G MY 8Bar, includes pump and precision 4 to 20mA measurement and source capability. The pump in this instrument is electric. Uncertainty 0.025%. Precision pressure adjustment vernier. Range -850mBar to 8Bar. Res- olution 1mBar. 4 to 20mA resolution 0.001mA 0.015%rdg + 2 counts. Fluke 725 Process Calibrator FLU,725-NATA (4784) AU FLU,725 MY DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22mA max. Resistance measurement 0.05%, 11kΩ max, source 0.01%, 1 1kΩ max. Frequency measurement 5 counts 1Hz to 50kHz, source 1 count 20Hz to 5kHz. ‘K’ thermocouple measurement 0.3ºC, source 0.3ºC. Pt100 RTD measurement 0.5ºC, source 0.2ºC. Measures and simulates 4 to 20mA, t/c E,N, J, K, T, B, R, S, & C, 2, 3 & 4 wire RTDs and frequency. Operates from drycell batteries. (Includes NATA calibration - AU). Fluke 726 Process Calibrator FLU,726 MY Precision multifunction process calibrator. DC voltage measurement. 0.010% 30V max, source 0.010% 20V max. DC current measurement. 0.010% 24mA max, source 0.01% 24mA max. Resistance measurement 0.015% 4kΩ max, source 0.01% 4kΩ max. Frequency measurement 5 counts 1Hz to 15kHz, source 1 count 20Hz to 15kHz. Will measure and simulate 4 to 20mA, TC E N J K T B R S and C, 2, 3 and 4 wire RTDs and frequency. Loop power supply at: 24V, 22mA. Pulse Source 10k and read 100k. The unit operates from drycell batteries. Fluke 743 Calibrator FLU,743B MY Includes RS232 interface. DC voltage measurement 0.025%, 300V max, source 0.01%, 15V max. DC current measurement 0.025%, 110mA max, source 0.01%, 22mA max. Resistance measurement 0.05%, 11kΩ max, source 0.01%, 11kΩ max. Frequency measurement 0.5%, +5, 40 to 500Hz, source 1 count 20Hz to 5kHz. ‘K’ thermocouple measurement 0.3ºC, source 0.3ºC Pt100. RTDs measurement 0.3ºC, source 0.1ºC. Measures and simulates 4 to 20mA, t/c E, N, J, K, T, B, R, S, & C, 2, 3 & 4 wire RTDs, frequency, test limit switches. Can use scaling factors for measurement & source. Built in calculator. Autostep function. Allows user entered values. Operates as an 8k point data logger. Note PC software only supports 15 tags. Fluke 744 DOC Calibrator with Hart FLU,744 (4782) AU/MY Documenting process calibrator which includes HART communication protocols for communicating with and setting up smart transmitters. RS232 interface. DC voltage measurement 0.025%, 300V max, source 0.01%, 15V max. DC current measurement 0.025%, 110mA max, source 0.01% 22mA max. Resistance measurement 0.05%, 11kOhm max, source 0.01% 11kOhm max. Frequency measurement 0.5%, +5, 40~500Hz, source 1 count 20~5kHz. ‘K’ thermocouple measurement 0.3ºC, source 0.3ºC Pt100. RTDs measurement 0.3ºC, source 0.1ºC. Measures and simulates 4~20mA, t/c E, N, J, K, T, B, R, S & C, 2, 3 & 4 wire RTDs, frequency, test limit switches. Uses scaling factors for measurement & source. Built in calculator. Autostep function. Allows user entered values. Operates as an 8k point data logger. Note PC software only supports 15 tags. General Industrial & Process Management www.techrentals.com.au
  • 46. 45 Industrial Process Calibrators cont’d. Fluke 773 Milliamp Process Clamp Meter FLU,773 (4779) AU Measure 4 to 20mA control lines, PLC loops, transmitters or any 4 to 20mA line without breaking the loop. Capable of 0 to 20.99mA and 24 to 100mA with clamp. Source and simulate mA and voltage signals in circuit. 4 to 20mA scaled o/p. Fluke 789 Process Meter FLU,789 PROCESSMETER (4786) AU/MY Standard multimeter functions with 2 to 20mA sink and source capability, including a 24V supply. HART 250Ω resistor, 20mA drive into 1,200Ω. Simultaneous mA and % of scale readout on mA output. 25% manual step plus auto step and auto ramp on mA output. Min/max/average/hold/relative modes. Double size dual display. Accuracy, VDC 0.1% +1, VAC 0.7% +2, mA DC 0.05% +2, frequency 0.005% +1. Jofra DPC-500 Documenting Pressure Calibrator 1000 Bar NATA JOF,DPC-1000-NATA (4775) AU Documenting pressure calibrator is used for high precision calibration of pressure gauges, pressure transmitters, digital manometers, pressure switches, overpressure protection valves etc. Measure pressure at 1,000 Bar or 14,500psi, voltage 0 to 10V, current 0 to 20mA and 4 to 20mA, and supplies 24VDC as source for transmitters. Accuracy ±0.025% F.S. Supplied with Druck PV212 1,000 Bar hand pump and calibration software. 15 user selectable engineering units including user defined. Nata Calibrated. SI PC6 20 Bar NATA Pressure Calibrator & Pump SI,PC6-20-NATA (4753) AU Basic accuracy 0.025%. Range output pressure to 20 Bar, output vacuum to -1 Bar. NATA certified Instrument. Measures voltage 0~100mV (1μV resolution), 0~5V (0.1mV resolution) & 0~50V (1mV resolution) and current 0~50mA (1μA resolution) all at 0.025% accuracy. Sources 0~10V (0.2mV resolution) & 0~50mA (1μA resolution) also at 0.025% accuracy. Voltage output regulated 10V ±0.1% current 30mA and unregulated supply 24V ±10% current 50mA. Pressure switch status. Battery operation 10h or mains operation via charger. SI PC6 35 Bar NATA Pressure Calibrator & Pump SI,PC6-35-NATA (4759) AU Basic accuracy 0.025%. Range is 35 Bar. Measures voltage 0~100mV (1μV resolution), 0~5V (0.1mV resolution) & 0~50V (1mV resolution) & current 0~50mA (1μA resolution) all at 0.025% accuracy. Sources 0~10V (0.2mV resolution) & 0~50mA (1μA resolution) also at 0.025% accuracy. Voltage output regulated 10V ±0.1% current 30mA and unregulated supply 24V ±10% current 50mA. Pressure switch status. Complete with a full range of pressure connection adaptors. Record logging capability 444 and RS232 interface download to spread sheet files. Battery operation 10h or mains operation via charger. SI PC6 700 Bar Pressure Calibrator and HTP1 Hydraulic Pump NATA Calibrated SI,PC6-700-NATA (4773) AU/MY Range 0 to 700 Bar. Measures 0 to 100mV (1μV resolution), 0 to 5V (0.1mV resolution), 0 to 50V (1mV resolution) & current 0 to 50mA (1μA resolution) all @ 0.025% accuracy. Sources 0 to 10V (0.2mV resolution) & 0 to 50mA (1uA resolution) @ 0.025% accuracy. Voltage output regulated 10V ±0.1% current 30mA and unregulated supply 24V ±10% current 50mA. Pressure switch status. Pressure media oil, water & non corrosive gases. Battery operation 10h or mains operation via charger. Wet & Dry Block Calibrators Fluke 9141 Dry Block Temperature Calibrator 50 to 650ºC FLU,9141-NATA (4835) AU RRange 50 to 650ºC, basic accuracy 0.5%. Insert hole sizes 1.6mm(1/16”), 3.2mm(1/8”), 4.8mm(3/16”), 6.4mm(1/4”), 9.5mm(3/8”) and 12.7mm(1/2”). Includes PC software and interface cable. Heating time 1min to 650 deg C. Cooling 25min from 650 to 100 deg C. Well depth 4.875”. Stabilization time 7min. Fluke 9150 Thermocouple Furnace 150 to 1,200°C NATA Calibrated FLU,9150-NATA (4840) AU Temperature range 150 to 1,200°C. Stability ±0.5°C, display accuracy of ±5°C across entire range. Display resolution 0.1 to 999.9°C, 1° above 1,000°C. Well diameter 32mm, well depth 140mm, insert type 9150 A, 0.4, 6.4, 9.5, 3.2, 12.7mm. Heating time 35min to 1,200°C, cooling time 140min. Fluke 9170-R Dry Block Temp Calibrator -45 to 140°C FLU,9170-R-NATA (4825) AU FLU,9170-R MY Metrology well calibrator. Temperature range -45 to 140°C with built in reference thermometry. Reference input accepts (not supplied) 100, 25 and 10 ohm PRT’s. Display accuracy ±0.1°C, stability ±0.005°C full range, resolution 0.001°C. Well depth 160mm (6.3”), insert type A, 3 x 6.4mm(1/4”), 4.8mm(3/16”), 3.2mm(1/8”), 5.9mm(3/8”). Large LCD, numeric keypad and on screen menus. Grant GR150-S5 Temperature Bath NATA Calibrated GRA,GR150-S5-NATA (4820) AU Water/oil bath and circulator for calibrating temperature probes and analytical procedures. Temperature ranges from ambient to 100ºC with water and 150ºC with silicon oil. Requires 3L oil (not supplied). Stability 0.005ºC, uniformity 0.02ºC and display resolution 0.1ºC. Tank size 300mm W x 150mm D x 150mm H. Features include digital temperature controller and display, pump, timer, alarms, offset adjustment and more. Jofra CTC-650A Temperature Calibrator JOF,CTC-650A MY Exceptionally fast and has deep immersion depths of 110mm (4.3 inch). Heats up to the maximum temperature in just 20 minutes. Temperature range: 33 to 650°C. Accuracy: 0.9°C. Stability: 0.1°C. Multi-Hole insertion tube: 1/4”, 1/8”, 3/8” and 3/16”. Jofra CTC-1200A Temperature Calibrator JOF,CTC-1200A MY Compact temperature calibrator. Lightweight, portable for lab and general use. Temperature range: 572 to 2200ºF (300 to 1205ºC). Excellent Performance Characteristics. Accuracy: ±4.0ºF (±2.0ºC). Stability: +1.0ºF (+0.5ºC). Stability Time: 20 minutes. Display in F or C to 0.1 resolution. Fast cooling and heating. User-selectableSlopeRatesforcontrolled.Thermoswitch testing. Self Diagnostics includes Semi-Auto Switch Test and Hysteresis Test. Size of thermowell/insert: 6.5mm & 10mm. 1/4” probe. 1/2” probe. Strip Chart Recorders Rototherm C105 10,000psi Pressure Recorder ROT,C105 MY Single pen recording. (±)1% span maximum. 1/2”(M) BSP connection. 255 mm diameter, circular chart paper. General Industrial & Process Managementwww.techrentals.com.au
  • 47. 46 Strip Chart Recorders cont’d. Yokogawa DR130 Hybrid 20 Channel Recorder FDD YEW,DR130 (4010) AU Input unbalanced floating 20mV~50VDC, TC, RTD and contact. Accuracy 0.05%. Reads 20 channels in 2s. Recording width 150mm. Data can be saved to 500k of internal RAM either directly or due to alarm conditions. The saved data can be copied to a 3.5” FDD file suitable for inclusion in standard spread sheet programmes. High Speed Waveform Recorders Hioki 8835-HD520 520Mb PCMCIA Hard Disk for HIO,8835 & 8841 HIO,8835-HD520 (4122) AU PCMCIA interface complete with 520Mb card. Data can be stored in several formats: as a binary memory file for replay on the recorder; as a CSV text file compatible with Excel; as a BMP screen dump for a Word document, etc; as a single or dual FFT binary file for replay on the recorder. The recorder setup can be saved for future applications requiring the same settings. Data media is PCMCIA Type III compatible with many laptop computers. Hioki 8841 8 Analogue, 16 Channel Memory Recorder HIO,8841 (4117) AU Memory 12bits x 4 megawords/ch for 2 analogue ch, to 1 megawords/ ch for 8ch. In-built FDD, type III PCMCIA card slot (for flashcard & HDD up to 520Mb). Sampling rate of 1MHz max. Functions memory, real time record, RMS, real time/memory, X-Y memory, FFT. Trigger functions level, window in, window out, voltage drop, RMS level, cycle, logic pattern trigger 1,0 or X (disregard). When using logic channels, logic probes must be rented separately. Measurement range 400VDC, 240V RMS, low pass filters 5Hz, 500Hz, 5kHz or 100kHz, input coupling DC, GND, AC. Large 10.4” colour TFT display for settings and waveform display, wide thermal printer fitted. On screen help function. All settings and waveforms can be saved to media, waveforms can be saved as binary, text or bmp files. Hioki 8842 16 Analogue, 16 Logic Channel Waveform Recorder HIO,8842 (4150) AU Memory 12bits x 16 megawords/ch for 2 analogue ch, to 2 megawords/ch for 16 ch. Analogue input channel ranges 10mV to 50V per div, 10X div, 400VDC, 240VAC RMS max. In-built FDD, type III PCMCIA card slot (for flashcard & HDD up to 520Mb). Sampling rate of 1MHz max. Functions memory, real time record, RMS, real time/memory, X-Y memory. Trigger functions level, window in, window out, voltage drop, RMS level, cycle, logic pattern trigger 1,0 or X (disregard). When using logic channels, logic probes must be rented separately. Measurement range 400VDC, 240V RMS, low pass filters 5Hz, 500Hz, 5kHz, or 100kHz, input coupling DC, GND, AC. Large 10.4” colour TFT display for settings and waveform display, wide thermal printer fitted. On screen help function. All settings and waveforms can be saved to media, waveforms can be saved as binary, text or bmp files. Hioki 8860 8 Channel High Speed Memory Recorder HIO,8860 (4129) AU High speed memory recorder, 20MS/s sampling rate, 8 analogue channels, 16 logic channels, built in printer. 512MW or direct access memory, 60GB hard drive built-in, PC card type II slot up to 4GB ATA flash card (optional) USB, LAN interface and large colour screen. High Speed Waveform Recorders cont’d. Hioki 8870-20 Memory Hicorder 2 Analogue & 4 Logic Channels HIO,8870-20 (4101) AU Channels; 2 analogue and 4 logic (standard equipment, logic grounds are common with instrument ground), 10mV to 50V/div, 12 ranges, resolution: 1/100 of range, DC 400V, DC to 50kHz (-3dB). 100μs/div to 5 min/div, 20 ranges, at 100 points/div resolution, three steps of time-axis magnification from 2× to 10×, and nine steps of time-axis compression from 0.5× to 0.001. MEM (high- speed recording), 12bits × 2M-Words/ch, CF Card Type I slot × 1, up to 1GB. Display 4.3 inch WQVGA-TFT colour LCD (480 × 272 dots). One USB 2 high speed mini-B receptacle: transfers files from the installed CF card to a PC when connected. Numerical calculation, cursor readout, scaling function, screen copy, gauge display, waveform data/setting configurations backup, start condition retention, auto-save, instantaneous value or RMS value display (only DC and 50/60Hz). Use with the AC adapter, 100 to 240VAC (50/60Hz) 30VA max. Battery pack; continuous use 2h (AC adapter has priority when both are used). 12VDC supply: 10 to 16V, 10VA Max. Hioki 8938 FFT Input Signal Module HIO,8938 (4138) AU FFT Module with anti-aliasing filter. Frequency range DC to 400kHz, sampling rate 1MS/s. Maximum input voltage 400VDC, 240V RMS. Hioki 9306 4 Channel Contact & Digital Logic Probe HIO,9306 (4123) AU Contact interface for HIO, 8811, 8835, 8835-01, 8841 & 8842 memory recorders. Threshold digital >1.4V maximum input 50V. Contact closure input, 2k input resistance 30V allowable input. Response time 2μs. Hioki 9320 4 Channel Contact & Digital Logic Probe HIO,9320 (4140) AU For HIO, 8811, 8835, 8835-01, 8841 & 8842 memory recorders, 4 channels per probe, max of 4 probes per recorder. Threshold digital selectable 1.4V, 2.5V & 4V. Response time 500ns max. Relay dry contact detection. Max allowable input 50VDC. Hioki 9321 Line Logic Probe HIO,9321 (4124) AU Four channels (insulated) per probe. Detection of 60 to 150VAC, 170 to 250VAC, 20 to 150VDC & 70 to 250VDC in 2 ranges. Response time slope rise 1ms, fall 3ms. Max input low range 150V RMS, high range 250V RMS. Max rated voltage to earth 250V RMS. Connector cable 1.5m. Probe tip cable 1m. Hioki 9335 Wave Processor Software for Hioki 8835, 8835-01, 8841, 8842 HIO,9335 (4155) AU Waveform Processor software, displays, converts to CSV, calculates and prints waveforms with a PC. Review stored binary files from Hioki 8835, 8835-01, 8841 and 8842 memory recorders. Only way stored binary files can be viewed on a PC without having to re save them with memory recorder as text files. Hioki 9725 Memory Viewer Software HIO,9725 (4157) AU Data processing software for Hioki 8860 High Speed Memory Recorder. Functions: file loading, maximum loadable data size 2GW file saving, measurement of data binary, partial saving between A/B cursors is possible. Screen images BMP and PNG, calculation results. Display of saved binary files, displayable channels per sheet analogue 32, logic 16 channels. Displayable sheets 16. General Industrial & Process Management www.techrentals.com.au
  • 48. 47 Data Loggers Datataker CANGATE Gateway & Garmin 5Hz GPS DE,CANGATE (4236) AU Interface to allow dataTaker loggers and PC (via RS232) to access CANBUS networks including J1939 & OBD2. The device also includes a Garmin 5Hz GPS system. DataTaker DT600 Data Logger DE,DT600 MY Includes LCD display enabling use as a measuring instrument if pre-programmed for channel parameters. 10 differential or 30 single-ended channels. 25 channel/sec. 4 TTL/CMOS digital inputs. 3 counter channels up to 1MHz. Up to 120 alarms with 1 digital I/O and 3 front panel LEDs. Internal memory for up to 13,000 data points with optional memory card to 170,000 readings. RS-232C data communications port and RS-485 port for networking up to 32 loggers. Maths processing included. Input ranges 25mV to 2.5VDC. Maximum sensitivity 2μV. Current 0.25 to 25ma. Current loop 4-20mA. Resistance up to 7,000 ohms. Thermocouples types B,C,D,E,G,J,K,N,R,S, & T from -250 to 1800ºC. Thermistors and RTD’s. Strain gauges. Supplied with determinal & decipher plus software. Operates from internal battery, external battery, or ac mains. DataTaker DT80 5 to 15 Channel Logger with USB Memory Stick Download DE,DT80 (4232) AU/MY Measures voltage, current, resistance and frequency. Up to 15 analogue (±30V) sensor inputs. Each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. 12 flexible digital channels. Expandable to 300 analogue inputs. Store up to 10 million data points in user defined memory. Data Loggers cont’d. DataTaker DT80M 5 to 15 Channel Logger with Built in Modem DE,DT80M (4234) AU IIncludes a built in GSM modem for internet access to the device supports 2G and 3G networks (GSM/ GPRS/EDGE/WCDMA). Measures voltage, current, resistance and frequency. Up to 5 analogue (±30V) sensor inputs. Each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. Store up to 10 million data points in user defined memory. Generally used at sample rates of 1Hz and slower. DataTaker DT800 Data Logger DE,DT800 (4231) AU/MY Universal input channels 12 balanced or 42 unbalanced analogue channels. Eight bi-directional digital channels and 8 digital input channels. Solid state multiplexer protected to ±40V. Max in/out voltage ±12V. Serial sensor channel can be used with GPS systems. Measures V, 4 to 20mA, strain, TC, RTD etc. Sampling rate 200Hz up to 100kHz in burst mode. Instrument has RS232, RS422, USB, Ethernet (10baseT) & PC card modem communications. Pluggable 64Mb memory card stores up to 300,000 (compressed) readings per Mb. Instrument stores 600,000 (compressed) readings in internal memory. Total memory capacity 10.2Mb (compressed). General Industrial & Process Managementwww.techrentals.com.au A CANBUS DIAGNOSTIC SOLUTION A bus and truck manufacturer was alerted to an issue of premature wear on their vehicles braking systems. End user reports showed an unexpected and repeated need to replace brake pads on the rear wheels of several buses. This revelation represented a significant financial concern, and not just in increased maintenance costs. The lost time compounded across multiple sectors, would lead to an unacceptable drop in productivity. It was necessary to pinpoint whether the problem was a result of component error, brake mechanics or driver operation. Only then could the appropriate course of action be taken to rectify the issue. That is when TechRentals was called to find a diagnostic solution. Our customised analytical system comprising of a data logger, a Canbus interface, with mapping functionality and GSM telephony communication was implemented and installed on the fleet. The Canbus results determining speed, hand brake position, brake pedal compression, as well as gearing information and ratios were recorded and compiled for all the vehicles fitted. This data was downloaded and overlayed on Google maps to provide a graphical representation. This allowed analysis of the timing at exact locations of every relevant operation that could concern a vehicles braking system. The precise positioning information, coupled with the visual representation of the terrain, meant that both geographical and environmental factors such as steep inclines or congested traffic could be properly considered alongside the raw data. While examining the operational patterns of the vehicles being investigated, it soon became apparent that drivers were using the hand brake for slow speed stopping instead of utilising the brake pedal. This was putting undue wear on the rear braking pads, thus leading to the early need for replacement. Once this was established to be the underlying problem, it was then simply a matter of updating the operators in correct braking procedure and retraining operators.
  • 49. 48 Data Loggers cont’d. Datataker DT85 48 Channel Logger with USB Memory Stick Download DE,DT85 (4233) AU Analogue inputs 32 isolated and 48 single ended inputs. 2 x 4 digital input types. 2 x serial sensor ports, Modbus capability, 4 x SDI12 channels, USB memory stick interface for easy data and programming etc. Operating time on the internal battery is 1s sample 2.4h. 5s sample 3 days, 1min sample 1 month. ETM 9900 Intelligent Modem and IO. Sends SMS Messages ETM,9900 (4290) AU Can send a user defined alarm message via SMS. Has 7 IO channels. Will provide alarm messages for instruments such as the ARL,NGARA, PRO,VIBRA & the TSI,8520 & 30. Will operate for around 4 months on 2xD cell batteries when the alarm status is checked once per hour. Can be put on site and remotely programmed. Fourier DAQPRO8 Battery Operated Hand Held 8 Channel Data Logger FOU,DAQPRO-2 (4282) AU Portable, hand held, battery operated 8 channel data logger. 16-bit resolution, built in graphic LCD, for setting up, graphical display of logged data. PC communications via USB interface. Signal inputs 0 to 24mA, 0 to 50mV, 0 to 10V. Temperature input via NTC 10kΩ, 100kΩ, range -25 to 150ºC, PT100 range-200to400ºC,T/CrangesJtype,-300to1500ºC,Ktype-250to1100ºC, T type -200 to 400ºC. Frequency input one channel only, 20 to 4,000Hz, sensitivity 20mV, pulse counter one input 0 to 65,000 counts. Memory capacity 512KB, sampling rates from 1s/h to 4,000s/s. Supplied with analysis and setting up software. Hioki 3641-20-Kit Temperature & Humidity Logger HIO,3641-20 MY Temperature and humidity logger includes: 1 x RS232C and 1 x USB communication base, utility software,RS232C and USB interface cables. Environment conditions for operation -20 to 70ºC, 80%RH (no condensation). Accuracy: temperature -40 to -0.1ºC ±1ºC, 0 to 35ºC ±0.5ºC, 35.1 to 70ºC ±1ºC. Humidity typical between ±5 to ±10% depends on temperature and humidity range. 8000 data points x 2 channels, recording interval 2,5,10,15,20,30s and 1,2,5,10,15 ,20,30,60min. Hioki 3641-20-Kit of 8 Temperature & Humidity Loggers HIO,3641-20-KIT (4256) AU Kit of 8 x temperature and humidity loggers. Includes 1 x RS232C and 1 x USB communication base, utility software, RS232C and USB interface cables. Environment conditions for operation -20 to 70ºC, 80%RH (no condensation) Accuracy: Temperature -40 to -0.1ºC ±1ºC, 0 to 35ºC ±0.5ºC, 35.1 to 70ºC ±1ºC. Humidity typical between ±5 to ±10% depends on temperature and humidity range. 8000 data points x 2 channels, recording interval 2,5,10,15,20,30s and 1,2,5,10,15 ,20,30,60min. Hioki 8421-01 16 Channel Data Logger with Colour Display HIO,8421-01 (4270) AU 16 analogue, 4 pulse input channels data logger with colour display, PCMCIA card slot, LAN interface built in, TCP/IP communication supports real time PC logging, FTP, SMTP and HTTP. Signal inputs 100mVDC, 1VDC, 10VDC, 60VDC, 1 to 5VDC fs. Thermocouples K,E, J, T, N, W (WRe5 to 26) R, S, B, -100 to 100ºC, -200 to 500ºC, -200 to 2,000ºC, RTD Pt100 -200 to 800ºC. Pulse input, accumulation 50,000 counts fs, 500,000 counts fs, 5M counts fs, 100M counts fs, 2,500M counts fs. Rotation 5,000/n (r/s) fs. Recording interval is selectable from 100, 200, 500ms, 1, 2, 5, 10, 20, 30s, 1, 2 & 5min. Max sampling rate is dependent upon type of input signal. Internal Memory 8Mb, 256Mb Flashcard, 9334 logger communicator software, 9642 LAN cable, 9641 pulse signal input cable all supplied. Data Loggers cont’d. Hioki 8421-51 16 Channel Data Logger with Colour Display HIO,8421-51 (4271) AU 16 analogue, 4 pulse input channels data logger with colour display, PCMCIA card slot, LAN interface built in, TCP/IP communication supports real time PC logging, FTP, SMTP and HTTP. Signal inputs- 100 mVDC, 1VDC, 10 VDC, 60VDC, 1-5VDC f.s. Thermocouples K, E, J, T, N, W (WRe5-26), R, S, B, -100 to 100ºC, -200 to 500ºC, -200 to 2,000ºC, RTD Pt100 -200 to 800ºC. Pulse input, accumulation 50,000C f.s, 500,000C f.s, 5MC f.s, 100MC f.s, 2,500MC f.s. Rotation 5,000/n (r/s) f.s. Recording interval selectable from 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s, 20s, 30s, 1min, 2min, 5min. Max sampling rate is dependent upon type of input signal. Internal Memory 16MW, 512MB PCMCIA FLASH card, 9334 Logger Communicator software, 9642 LAN cable, 9641 pulse signal input cable all supplied. Improved common mode rejection -100dB or better when 50/60Hz, 140dB or better when 50Hz, using ch1 to ch16, interval 5s, digital filter 50Hz selected. Faster sampling when using Pt100, improved temperature characteristics. Hioki 8422-51 32 Channel Data Logger HIO,8422-51 (4273) AU 32 analogue, 4 pulse input channels data logger with colour display, PCMCIA card slot, LAN interface built in, TCP/IP communication supports real time PC logging, FTP, SMTP and HTTP. Signal inputs- 100 mVDC, 1 VDC, 10 VDC, 60 VDC, 1-5V DC f.s. Thermocouples K,E, J, T, N, W (WRe5-26) R, S, B, -100 to 100ºC, -200 to 500ºC, -200 to 2,000ºC, Pulse input, accumulation 50,000C f.s, 500,000C f.s, 5MC f.s, 100MC f.s, 2,500MC f.s. Rotation 5,000/n (r/s) f.s. Recording interval is selectable from 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s, 20s, 30s, 1min, 2min, 5min. Max sampling rate is dependent upon type of input signal. Internal Memory 8MB, 512MB PCMCIA FLASH card, 9334 Logger Communicator software, 9642 LAN cable, 9641 pulse signal input cable all supplied. Hioki Kit of Three 9322 Differential Probe High Voltage True RMS Interface HIO,9322-KIT (4119) AU Used with many memory recorders, eg. Hioki 8835. Operating modes 3. DC mode for waveform monitor output DC to 3MHz, AC mode detection of power surge noise 1kHz to 10MHz. Rectified true RMS output of DC & AC voltages. 40Hz to 100kHz response speed 200ms or less. Max voltage DC 2kV, AC 1kV CATII, AC/DC 600V CATIII, balanced differential input 1/1,000 divider. Testo 175-H1 Temperature & Humidity Logger TES,175-H1 (4251) AU Large display. 3 year battery life, 1 million sample memory. RH 0 ~100% ±2%, temperature -20~50ºC ±-0.4ºC . Includes USB interface to download data Testo 177-H1 Logger with Display TES,177-H1 MY Parameters: humidity/temperature/dew point. Sensors: humidity sensor/ NTC (internal). Number of channels: 4. Measuring range: 0 to 100%RH and -20 to 70ºC (internal). Memory: 48,000 readings. Testo 177-T4 Logger with Display TES,177-T4 MY Parameters: temperature (C/F). Sensors: thermocouple type-K. Number of channels: 4 (external). Measuring range: -100 to 1,000 ºC (external). Memory: 48,000 readings. See also Air Conditioning & Air Flow on page 58-59 General Industrial & Process Management www.techrentals.com.au
  • 50. 49 Pressure & Humidity Transducers Druck PTX1400-25 25 Bar Pressure Transducer 4 to 20mA DRU,PTX1400-25 (4302) AU Output 4 to 20mA output, 0 to 25 Bar input. Requires 9 to 28VDC, supplied with 12V, 500mA power pack. Druck PTX 1400 600 Bar Pressure Transducer DRU,PTX1400-600 (4305) AU Output 4 to 20mA. Requires 9 to 32VDC, supplied with 12V plug pack. Pressure Vacuum Gauges/Recorders Crystal XP2i Digital Logging Pressure Gauge 7 Bar NATA calibrated CRY,XP2I-100-NATA (4341) AU Range 7 Bar resolution 0.1mBar. Accuracy 1.4 to 7 Bar ±0.1% of reading. 0 to 1.4Bar ±1.4mBar. Vacuum ±17.5mBar. Has a 6000 point logging capability. Logging intervals from 1s up can be set. Logs either actual pressure, average pressure or average pressure with max and min. Also logs on demand. 1/4 NPT connector. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards. Crystal XP2i Digital Logging Pressure Gauge 20 Bar NATA calibrated CRY,XP2I-300-NATA (4341) AU Range 20Bar resolution 1mBar. Accuracy 4 to 20 Bar ±0.1% of reading. 0 to 4Bar ±-4mBar. It Has a 6000 point logging capability. Logging intervals from 1s up can be set. Logs either actual pressure, average pressure or average pressure with max and min. Also logs on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards. Crystal XP2i Digital Logging Pressure Gauge 70 Bar NATA calibrated CRY,XP2I-1K-NATA (4342) AU Range 70Bar resolution 0.001 Bar. Accuracy 14 to 70 Bar ±-0.1% of Reading 0 to 14 Bar ±14mBar. Has a 6000 point logging capability. Logging intervals from 1s up can be set. Logs either actual pressure, average pressure or average pressure with max and min. Logs on demand. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards. Crystal XP2i Digital Logging Pressure Gauge 210 Bar NATA calibrated CRY,XP2I-3K-NATA (4343) AU CRY,XP2I-3K MY Range 210 Bar resolution 0.01Bar. Accuracy 40 to 200 Bar ±-0.1% of reading. 0 to 40 Bar ±-0.04 Bar. Has a 6000 point logging capability. Logging intervals from 1s up can be set. Logs either actual pressure, average pressure or average pressure with max and min. Also logs on demand. 1/4 NPT connector. Intrinsic and safety ratings registered under IECEx, ATEX. Crystal XP2i Digital Logging Pressure Gauge 700 Bar NATA calibrated CRY,XP2I-10K-NATA (4344) AU CRY,XP2I-10K MY Range 700 Bar resolution. 0.01 Bar accuracy. 1% of reading. Has logging capability. 6000 point pressure logging capability. Logging interval can be set from 1s up. Logs either Actual Pressure, Average Pressure, or Average pressure with Max & Min or log on demand. NATA Calibrated. 1/4 inch NPT connector. Intrinsic and safety ratings registered under IECEx, ATEX and DNV standards. Flow Meters for Liquids & Gases See also Environmental Flow Meters on page 69 Flexim Ultrasonic Gas Flow Meter FLE,G608 (6156) AU Ultrasonic flow meter is a clamp-on transit time gas and liquid flow meter, 2-channel, with Zone 2 Ex-certification for use in hazardous areas. Supplied with three transducer pairs and a pipe wall thickness gauge; includes an integral data-logger with more than 100,000 measured values, easy-to-use software for trending the data and an integral Lithium-ion rechargeable battery with AC adapter. The GLK transducers are suitable for 4 to 9mm wall thickness, the GLM 2 to 5mm and the GSM 2.5mm and greater. Utilises either Shear wave (standard) transducers, or Lamb wave (specialist gas) transducers. The Lamb wave transducers resonate the pipe wall to amplify the signal strength, thereby allowing it to measure applications at significantly lower pressures than the standard Shear wave transducers. GE Panametrics PT878GC Ultrasonic Gas Flow Meter PAN,PT878GC-01 (6151) AU Portable non-contact gas flowmeter using transit-time principle. For operation with ultrasonic transducer-kits (PAN,GC-RL302 & PAN,GC- RL319) - available separately. Compatible with metal or plastic pipes in the range 20 to 300mm. Suitable for use with compressed air, natural gas and other gases. Readout for flow velocity, actual or standard volumetric flow or mass-flow in numerical or graphic format. Internal logging for 100K flow data points. Infrared communications port for download to PC or printer interface. Rechargeable battery for 8h continuous operation. Gas-flow Small Pipe Transducer Kit for PT878GC PAN,GC-RL302 (6153) AU Advanced clamp-on ultrasonic transducer pair for use with Panametrics gas flowmeters. Operation at 1MHz for pipes in the range 20 to 55mm typical. General purpose use for process temperatures -40 to 176°C. Supplied with two precision gauged clamping fixtures for pipe range. Gas-flow Medium Pipe Transducer Kit for PT878GC PAN,GC-RL319 (6155) AU Advanced clamp-on ultrasonic transducer pair for use with Panametrics gas flowmeters. Operation at 500kHz for pipes in the range 75-300mm typical. General purpose use for process temperatures -40 to 176°C. Supplied with set of three precision gauged clamping fixtures for pipe range. GE Panametrics PT878 Ultrasonic Flowmeter PAN,PT878 (6101) AU/MY Portable non-contact liquid flowmeter using transit-time principle. Includes transducers for pipe 50mm to 2mØ & temperatures -40 to 130°C (various alternative transducers available)withclampingfixture.Flowvelocity range 0.03 to 12.2m/s. Accuracy typically 1%. Data logging for over 100K data points. Analogue inputs compatible with temperature transmitters for energy-flow calculations. Outputs analogue 4 to 20mA, digital (pulse or frequency) and printer/computer (Infrared port). Large LCD display for velocity, volumetric and energy flow rate, totalised flow and trend data in alphanumeric and graphical formats. Rechargeable NiMH batteries and AC power supply/charger. See Also GLO,FP111 Global FP111 Digital Water Velocity Meter on page 69 General Industrial & Process Managementwww.techrentals.com.au
  • 51. 50 Flow Meters for Liquids & Gases cont’d. Panametrics PT878E Ultrasonic Liquid Flow Energy Meter PAN,PT878E (6102) AU Portable non-contact liquid flowmeter using transit-time principle. Includes transducers to measure energy and transducers for pipe 50mm to 2mØ & temperatures -10 to 130°C (various alternative transducers available) with clamping fixture. Flow velocity range 0.03 to 12.2m/s. Accuracy typically 1%. Data logging for over 100K data points. Outputs analogue 4 to 20mA, digital (pulse or frequency) and printer/computer (Infrared port). Large LCD display for velocity, volumetric and energy flow rate, totalised flow and trend data in alphanumeric and graphical formats. Rechargeable NiMH batteries and AC power supply/charger. GE Panametrics PT878 Ultrasonic Liquid Flow Meter PAN,PT878T (6103) AU Portable non-contact liquid flowmeter using transit-time principle. Includes thickness gauge and transducers for pipe 50mm to 2mØ & temperatures -40 to 130 degC (various alternative transducers available) with clamping fixture. Flow velocity range 0.03 to 12.2m/s. Accuracy typically 1%. Data logging for over 100K data points. Analog inputs compatible with temperature transmitters for energy-flow calculations. Outputs analog 4 to 20mA, digital (pulse or frequency) and printer/computer (Infrared port). Large LCD display for velocity, volumetric and energy flow rate, totalised flow and trend data in alphanumeric and graphical formats. Rechargeable NiMH batteries and AC power supply/ charger. GE Panametrics 12 to 50mm Transducers PAN,C-LP-40NM (6108) AU//MY Transducer pair for PAN,PT868/878 transit-time flowmeter to suit pipe 12 to 50mmØ. Complete with CF-LP-50M mounting bracket. Temperature range -40 to 120°C. GE Panametrics -20 to 210°C Transducers PAN,C-PT-10HB (6110) AU High temperature transducer pair for PAN,PT868/878 transit-time flowmeter. Operates on pipe sizes 50mm~2m diameter. Working temperature range -40~230°C. GE Panametrics -200 to 400°C Transducers PAN,OKS (6112) AU Very high temperature, wide range transducer pair for PAN,PT868/878 transit-time flowmeter. Temperature range -200 to 400°C, for pipe 80mm to 600mmØ. Uses special clamp system supplied. Appropriate protection and safe-handling equipment is required for fitting and operation at very high or low temperatures. Polysonics Hydra SX30 Dual Frequency Doppler Liquid Flowmeter POL,HYDRA-SX30-2 (6132) AU Dual frequency doppler ultrasonic non-contact flowmeter. Velocity range 0.06 to 10m/s, accuracy ±1%. Pipe size range 12 to 5,000mm diameter. Data logging for 90,000 points, with PC software and interface cable for download via RS232C interface. Transducer temperature range -40 to 122°C. Analogue output 4 to 20mA. Battery operated, 12h continuous use (8h recharge). Combustion, Flue & Industrial Gas Analysers See also Environmental Gas & Vapour Meters on page 63-64 Novatech O2 and CO2 Analyser/Transmitter NOV,1637-5 (5954) AU Oxygenandcarbondioxideanalyserforpackaging atmosphere, general industrial and research use. Oxygen sensor reading 1ppm to 100% with 1% accuracy. NDIR carbon dioxide analysis 0 to 100% ±3% of full scale. 2 x 4 to 20mA outputs, 1 common & 3 selectable alarm relays. Gas connection 1/8 Swagelok. Flow rate with internal pump 100 to 500cc/min. AC operation. Testo 335 Combustion Gas Analyser TES,335 (5913) AU/MY Portable industrial flue gas analyser. Determines temperature (to to 1,000°C), draught/pressure (±40hPa), oxygen (21%), carbon monoxide (10,000ppm) and nitric oxide NO (3,000ppm) concentrations. Calculates carbon dioxide concentration, efficiency and flue gas loss. Threshold- protection of sensors, with 5X autodilution of CO to 50,000ppm. Separate sensor-socket with mini-probe for ambient temperature, and connection points for compatible differential-pressure devices. Built- in condensate-trap with warning and auto-switch-off. Internal memory [100 folders X 10 locations X 200 datasets each] for storage of measurement- protocols and data for printout. Supplied as kit with 335mm probe, cone and shield-plate, cordless printer and power supply. Rechargeable or AC operation (alkaline batteries used by printer). Testo 350XL Portable Flue Gas Analyser TES,350XL (5917) AU Measures O2 , CO, CO2 (measured by NDIR), NO, NO2 and SO2 concentrations plus draught, temperature, excess air, and gross/net efficiency values. Ranges: O2 0~25% vol, CO2 0~50%vol, CO with H2 compensation 0~10,000ppm with measuring-range extension and selectable dilution factor, NO 0~3,000ppm, NO2 0~500ppm, SO2 0~5,000ppm, draught 50hPa, temperature -40~1,000°C. Includes switch-off and rinse function for CO cell and fresh air rinse for longer term measurements. Internal memory for 250,000 readings, with RS232C interface and software provided. Operation from mains or rechargeable battery. Environmental Test Chambers/ Ovens Weiss WKL100/40 Temperature & Humidity Chamber WEI,WKL-100-40 (6218) AU Environmental chamber for temperature and humidity control. -40 to 180°C. Humidity range 10 to 98% (between 10 to 95°C). Max. Heating rate 2.5°C/min Max Cooling Rate 3.5°C/min. Test space volume 100l 540mm high, 490mm wide & 380mm depth. Programmable touch screen controller logs actual test temp. and humidity. Includes Ethernet interface and control software. Single shelf, 50mm access port with large window to view samples. Ultrasonic Baths Soniclean 2000HT Ultrasonic Cleaning Bath SON,2000HT (6202) AU Tank size 495mm W x 295mm D x 299mm H. Includes heater and timer. General Industrial & Process Management www.techrentals.com.au Save your time and reduce your real costs. Find out all about our Configuration and Download solutions on page 37.
  • 52. 51 SATELLITE PHONE RENTAL 1800 222 327 THINKTHINK RENTALSAVE MONEY –
  • 53. 52 Material Hardness Testers Non-Destructive Testing Micrometers Position Transducers Inclinometers Force Gauges Load Cells Weighing & Counting Scales over 8kg Vibration Analysis Speed Measurement GE DynaMic Rebound Hardness Tester GE,DYNAMIC (4936) AU Rebound hardness tester tests to ASTM A956 and DIN 50156. Will compensate for changes in testing direction. Provides readings in HV, HB, HRC, HRB, HS, HL & M/mm2 . Krautkramer DynaPocket Rebound Hardness Tester KRA,DYNAPOCKET (4932) AU Based on the Leeb’s method HL, utilising a 3mm tungsten carbide ball. Other hardness scales can be selected, HS Shore, HB Brinell, HRB Rockwell B, HRC Rockwell C, HV Vickers and N/mm2 tensile strength. Choice of 9 material groups can be selected, they are St Low-alloy/unalloyed steel and cast steel, ASt Tool steel, SSt Corrosion resistant steel, GCI Gray cast iron, NCI Nodular graphite cast iron, AL Aluminium cast alloys, brS Brass, brZ Bronze, Cu Wrought copper alloys. Proceq Equotip Hardness Tester PRO,EQUOTIP (4931) AU Test probe on a flexible lead. Probe type D is standard catering for most materials. Measurement ranges steels 80 to 650HB, 80 to 940HV, 20 to 68HRC, aluminium castings 20 to 160HB, cast iron 90 to 380HB, brass 40 to 170HB & copper wrought alloys 43 to 315HB. Test hardness must not exceed 940HV. Battery operated. Non-Destructive Testing Defelsko 6000 Ferrous & Non Ferrous Coating Thickness Tester DEF,POS-6000 (4870) Ferrous/Non Ferrous metal coating thickness tester with storage of up to 100,000 readings. Supplied with external probe, calibration standards and carry pouch. Measurement range 0 to 1500μm or 0 to 60 mils (selectable). Tolerance ±1μm +1% of reading 0-50μm, ±2μm +1% greater than 50μm. Resolution 0.1μm. Backglow display, HiLo limits audible & visible alerts when measurements exceed specified limits. Continually displays updates average, standard deviation, min/max thickness and number of readings while measuring. Built in USB, Bluetooth and Wifi for downloading readings. Non-Destructive Testing cont’d. PosiTector 200 B & C Ultrasonic Coating Thickness Gauge DEF,POS-200ADV (4880) AU Ultrasonic coating thickness gauge with type B & C Probes. Measures coating thickness over wood, concrete, plastics, composites etc. Will measure up to 3 individual layer thickness in a multi-layer system and features a graphic readout. Supplied with both B, 13 to 1000μm for wood, plastic and composites and C probes 50 to 3800μm for coatings on concrete, fibreglass etc. Accuracy is ±2μm +3% of reading. Defelsko Positest Pull Off Adhesion Tester for Concrete & Metal DEF,POSITEST (4895) AU Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. Pressure is displayed in both MPa and PSI on a precision dial indicator and can be related to the strength of adhesion to the substrate. Suitable for coatings on both metal and concrete surfaces. Conforms with standards ASTM D4541 and ISO 4624. Olympus Epoch 600 Flaw Detector OLY,EPOCH600 (4900) AU General purpose ultasonic flaw detector. Includes UT angle beam transducers 45, 60 & 70º, and Atlas dual element transducer. Stores images and data to micro SD card. Olympus Ultrasonic Thickness Gauge OLY,38DL (4905) AU Operates with dual and single element transducers, has colour transflective VGA screen. Includes datalogging capability. Does echo to echo measurements. Supplied with transducers to measure steel, cast, corroded steel, rubber, fibreglass and composites. Includes D7906- SM, M1036, M2008 M109-RM (inc delay line M202-RM) transducers. Olympus 26mg Pocket Thickness Gauge PAN,26MG (4910) AU/MY Range 1 to 500mm, fast min mode. Resolution 0.01mm. Probe operates -20 to 150ºC. Olympus Ultrasonic Probe for OLY,38DL & PAN,26MG OLY,D790-SM (4909) AU Ultrasonic high temperature probe for PAN,26MG & OLY,38DL. 5MHz 7.9mm tip diameter. Operating temperature range -20 to 500ºC. PCWI 30kVDC Porosity (Holiday) Detector PCW,DC30 (4885) AU DC Porosity (Holiday) detector. Detects pinholes in coatings above 150um on metal substrates such as pipes and tanks. 0-30kV, 3.5 digit LCD display with battery indicator, display of voltage level. Alarm indicated on front panel, supplied with rechargeable battery, 10h charger, probe handle with neon and 2m length cable, 60mm connector for flat brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension. Dry conditions. PCWI 40kV Pulse Porosity (Holiday) Detector PCW,P40-PULSE (4890) AU Pulse porosity (Holiday) detector. Detects pinholes in coatings and wrapping above 150μm on metal substrates such as pipes and tanks. Can be used on dry or wet surfaces. 0 to 40kV output, 4 digit LED display of voltage, alarm sensitivity setting between dry and wet. Supplied with rechargeable battery, 10h charger, red probe handle and 2m length of rubber coated cable, 60mm connector for flat brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension and 80mm probe extension. Material Hardness Testers Physical Measurement www.techrentals.com.au
  • 54. Tel.: 1300 132 992 • Fax: (03) 9540 0924 • info@olympus.com.au For worldwide representation visit www.olympus-ims.com Olympus ultrasound | phased array | eddy current | eddy current array | remote visual inspection | X-ray fluorescence Olympus designs, manufactures, and globally markets a range of innovative nondestructive testing and remote visual inspection instruments developed with a commitment to technology, design, and user friendliness. These products are used for inspection and maintenance in industrial and research fields ranging from aerospace and energy to transportation and manufacturing. Olympus instruments contribute to product quality and add to the safety of infrastructure and facilities. Olympus has earned industry-wide reputations for providing cost-effective solutions and excellent support and customer service. Technologies Ultrasound Eddy Current Remote Visual Inspection X-Ray Fluorescence Ultrasound Phased Array Eddy Current Array High-Speed Video Solutions Corrosion Testing Weld Inspection Security Flaw Detection Thickness Measurements Automated Testing Image Capture
  • 55. 54 Non-Destructive Testing cont’d. Phynix Surfix FN Ferrous/Non Ferrous Coating Thickness Tester PHY,SURFIX FN (4875) AU Thickness tester with memory and statistics. Supplied with external probe, calibration standards and carry pouch. Measurement range 0 to 1,500μm or 0 to 60mils (selectable), tolerance ±1μm +3% of reading, resolution 0.1μm. Display back light, 4 digit alphanumeric. Min measuring 5 x 5mm, min substrate thickness type F 0.5mm, type N 50μm. Calibration factory, zero, foil. Data memory 80 readings max. Interface infra-red download data to PC utilising hyper terminal. Wylam Hill Paint Thickness Gauge WYL,PORTAPAINT MY Rugged, fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness of ferrous metals, accurately and quickly. Position Transducers MEL M5-200 4 to 20mA Optical Position Transducer MEL,M5-200 (5315) AU Optical distance measurement device 4 to 20mA output. Will measure distance from 240mm to 440mm with an accuracy of 0.06mm. Does not require a reflector on the surface of the device. Light spot diameter is 10mm. Light sensor is IP67. 4 to 20mA transmitter is IP40. Will operate from 10 to 30V. Relay outputs indicate error condition. 1ms, 2ms or 20ms adjustable reaction time. Light source infrared 890nm invisible. Inclinometers Gloi ALiSensor Level and Flatness System GLO,ALISENSOR (5325) AU Precision level system including an iPad with applications for Straighness, Squareness, Flatness, Spindle Parallelism, Spindal Perpendicularity, Shaft Level and Shaft Plumb. Angle can be measured to .001Deg and flatness can be determined to 0.0025mm. Includes a magnetic fixture. Wyler Clinitronic 45 Inclinometer RS-232C WYL,CL45 (5326) AU Resolution 0.01º. Accuracy better than 30arc sec. Display inclination in all common measurements. Includes RS232 interface for remote display of inclination and also logging. Settling time <5s. Force Gauges Ametek Cadet 25 Digital Force Gauge AME,CADET-25N (4425) AU RS232C interface. Range 0 to 25N (2.5kg), resolution 0.3N (1g), accuracy 0.5% of full scale. Deflection 1mm. Display 4 digit LCD. Bi-directional with peak hold for compression & tension. NiCd operated. 1VDC recorder output. Force Gauges cont’d. Hilti Safety Bolt Inspection System HIL,TESTER4 (4460) AU Inspection system to test safety bolts (Safe Ring Bolts) on the exterior of buildings. The instrument will check the bolts to AS1891.4- 2000 Industrial fall arrest systems and devices. Part 4: Selection, Use & Maintenance or to AS4488.2-1997 Industrial rope access systems Part 2: Selection, Use & Maintenance. These tests need to be performed on a yearly basis on exterior connection points on building. These safe ring connection points will typically be used to suspend window cleaning harness systems. Mecmesin AFG-1000NALC Digital Force Gauge MEC,AFG-1000NALC (4433) AU Range 0 to 1,000N accuracy 0.1%. 5 digit back lit display. Peak data sampling rate 5kHz. 120% overload warning, display invert (reverse) function, dual max, max tension & max compression plus current reading. Outputs: analogue, RS232 & Mitutoyo. Accessories: test hook, compression plate, 130mm & 30mm extension rods, rotary coupling. Mounting tapped holes x 2, M5 x 0.8 x 5.5mm deep max. Optional smart sensors can be used, such as TW60 static torque wrench. Mecmesin TW60 Torque Wrench MEC,TW60 (4429) AU Range to 60Nm, optional accessory to be used with MEC,AFG-1000NALC Force Gauge. Smart interface, as soon as plugged into force gauge scaled accordingly. Load Cells AIC SG-AST-500 500kg S Type Load Cell with Panel Display AIC,SG-AST-500 (4405) AU Tension and compression 500kg. Nominal output 2mV/V, max excitation 15VDC, IP67 protection, safe load 125%, compensated temperature range -10to40ºC.ThreadM12x1.75P.Suppliedwith2xdetachablerodendbearings, PM4 -SG-DC-5E load cell panel meter, power 12 to 48VDC, AC adaptor supplied, output 0 to 10V. Panel indication in kg. Barlo MTC-150 150lb/68kg Load Cell BAR,MTC-150 (4401) AU Range 68kg compression and tension. Complete with interface operating from 12VDC or AC mains giving 0 to 2VDC output. Barlo STC-10000 10,000lbs/5,000kg Load Cell BAR,STC-10000 (4409) AU Range 4,536kg compression and tension. Interface operates from 12VDC or AC mains. Output 0 to 5VDC. Display resolution 1kg. Barlo STC-500 500lb/230kg Load Cell NATA Calibrated BAR,STC-500NATA (4403) AU Range 230kg compression and tension. Complete with conditioning electronics. Output 0-2V. Uses 1/2 UNF thread. NATA calibrated. Dillon ED2000 5,000kg Crane Scale DIL,ED2000-5K (4452) AU Complete with shackles. Range 5,000kg. Accuracy 0.1%. Resolution 1kg. i.e. 20kg uncertainty. Units of measure: kg, kt, mt, & lb. Proof load 200% of rated load. Displays gross and net force. Continuous measurement and peak hold. www.techrentals.com.au Physical Measurement
  • 56. 55 Weighing & Counting Scales Over 8kg Atlas TCS 60Kg Platform Scale ATL,TCS-60 (4441) AU 60kG capacity. Rechargeable battery. 6 Digit display, 22mm height. Platform 450 x 600mm. Accuracy OIML III ±50g. Vibration Analysis See also Noise & Sound Analysers on page 65 Fluke 810 Vibration Tester FLU,810 (5050) AU/MY Tests rotating machinery to determine the status of gearing wear etc. Used to: Troubleshoot equipment and understand cause of failure. Commission new equipment and ensure proper installation. Includes triaxial accelerometer and laser tacho. Store and reports FFT images to your PC. Very simple output that reports Pass and Fail on machinery condition. GTI Spindle Vibration Analyzer and Balancing System GTI,IPAD3VAB (5040) AU This system is based around an iPad. Measurement range ±196m/s2 , frequency range 1.6 to 10kHz. Includes accelerometer on a 3m lead with a magnetic base and an optical position sensor. Measures Acceleration or Velocity giving a 0~20kHz FFT display. Linear LSPC-1 1G Accelerometer DC to LF LIN,LSPC-1 (5034) AU/MY Designed for very low force levels ±1G measurement range. Operates down to DC in frequency. Output ±5V. Linearity 0.05%, resolution 0.001%. Shock Survivability 100g. Natural Frequency 100Hz. Madgetech Ultrashock-EB Transportation Logger MAD,ULTRASHOCK-EB (5025) AU Ultrashock-EB transportation ambient temperature, humidity, barometric pressure and 3 axis shock acceleration logger. Ranges: -40 to 180ºC, 0-95%RH, 0 to 30PSIA (0-200kPa , -50g to +50g. Memory 23,831 readings per channel. Logging interval from 1 reading per 2s to 1 reading per 12h. Sampling rate 2ms. Includes RS232 interface and setting up, downloading, graphing software. Profound Vibra Ground Vibration Logger PRO,VIBRA (5023) AU Designed for long term ground vibration logging. In- cludes a Geophone and remote alarm with flashing light. Velocity Range 0 to 100mm/s. 4 weeks opera- tion on 3 x D cell batteries. USB interface. Download possible while measuring. Full Windows analysis software included. IP65 case. Meets standards for ‘Vibration in buildings’ - Effects on structures’ and ‘Effects on persons in build- ings’, such as the DIN 4150 - part 2 and 3, DIN 45669 and the SBR 2002. The plus model also includes smart alarms which are frequency dependent, a built in modem to send alarms via SMS and email. A automatic daily status report. Also dominant frequency determination. Load Cells cont’d. Dillon EDX 20T NATA Crane Scale with Wireless Remote DIL,EDX-20T-NATA (4450) AU Digital crane scale. NATA calibrated 20T capacity, includes shackles and remote radio display/controller. Accuracy ±0.1%FS. Has peak hold. Will measure in kgF ibF or Newton. Futek IHH500 Pancake Load Cell 2T Capacity FUT,IHH500-2T (4416) AU TheIHH500 display & LCF500-FSH02968 loadcell operate at up to 20 tonnes (50,000lb) in compression and tension. The IHH500 handheld display is a logging microcontroller which can store up to 21000 points, it is powered by a rechargeable battery which can last for up to 30 hours depending on battery condition and load. It will operate from its mains charger if needed. The system has a simple ‘Tare’ function and can display ‘Max Hold’ using a single front panel key. The lead that connects the loadcell to the display is 1.6 Meters long. The load is connected via M33x2-Threads. There are two eye bolts supplied with the system, however the eye bolt capacity is 7 ton. The software is supplied on a USB flash drive/dongle. Futek IHH500 Pancake Load Cell 20T Capacity FUT,IHH500-20T (4418) AU IH500 display and LCF500-FSH02968 load cell operate at up to 20 tonnes (50,000lb) in compression and tension. The IHH500 hand held display is a logging microcontroller which can store up to 21,000 points, it is powered by a rechargeable battery which can last for up to 30 hours depending on battery condition and load. It will operate fromitsmainschargerifneeded.Hasasimple‘Tare’functionandcandisplay ‘Max Hold’ using a single front panel key. The lead that connects the loadcell to the display is 1.6 Meters long. The load is connected via M33x2-Threads. Software is supplied on a USB flash drive/dongle. Weighing & Counting Scales Over 8kg See also Balances & Scales Below 8kg on page 69 A&D Mercury FC-10K Counting Scales AND,FC-10K (4435) AU High resolution 10kg scales with sample counting facility. Display resolution 1g, internal resolution 0.02g. Sample size user selectable – normally 10 pieces. Max count size up to 999,999. AC & NiCd battery operation. A&D Mercury FG-150KB 150kg Scales AND,FG-150KB (4437) AU Capacity 150kg, 0.05 resolution. Includes RS232 port. National Standards Commission approved (NSC). A&D Mercury FS-15kg Weighing Scales AND,FS-15KA (4434) AU High resolution 15kg scales. Display resolution 1g. AC & NiCad battery operation. A&D HP-40KA 40kg Counting Scale AND,HP-40KA (4436) AU Capacity 40kg with 0.5g resolution. Can be used to determine battery weight change with charge, etc. Physical Measurement www.techrentals.com.au
  • 57. 56 Vibration Analysis cont’d. Profound Vibra Plus Ground Vibration Logger PRO,VIBRA-PLUS (5023) AU Designed for long term ground vibration logging. Includes a Geophone and remote alarm with flashing light. SMS & Email alarms are also possible. Velocity Range 0 to 100mm/s. 4 weeks operation on 3 x D cell batteries. USB interface. Download possible while measuring. Full Windows analysis software included. IP65 case. Meets standards for ‘Vibration in buildings’ - Effects on structures’ and ‘Effects on persons in buildings’, such as the DIN 4150 - part 2 and 3, DIN 45669 and the SBR 2002. Rion VA-10 Vibration Analyser RIO,VA-10 MY Measures acceleration, velocity and displacement. Stores 500 readings. LCD display with waveform, spectrum and data readout. Auto measurement function. Includes printer interface. Rion VA-11 Vibration Analyser RIO,VA-11 (5042) AU/MY Includes 2 pickup types hand held (PV55) and magnetic type (PV57). Measures acceleration, velocity and displacement. Displays RMS, peak and crest factor. Uses FFT to display power and vibration spectrum. Incorporates PCMCIA card flash memory for data storage. RS-232 interface available. PV57 1Hz to 5kHz, PV55 3Hz to 20kHz (velocity 3kHz, displacement 500Hz). Acceleration 0.02 to 316mm/s2 rms. Velocity 0.1 to 1,000mm/s rms. Displacement 0.003 to 28.3 (EQ PP). High pass filter 3Hz, 10Hz & 1kHz. Low pass 1kHz, 5kHz and 20 kHz. Stores 500 measurements. Rion VA-12 Vibration Analyser RIO,VA-12 (5040) AU Includes magnetic pickup type. Will store measurements. Measures acceleration, velocity and displacement and displays it in either time or frequency domain. It will display rms, peak and crest factor. Uses FFT to display power and vibration spectrum. Incorporates SD card memory storage. Svantek SV100 Whole Body Vibration Analysis SVA,SV100 (5005) AU Completely self-contained, integrated unit. Does whole body vibration dose (exposure) measurements, octave measurements, time domain record measurements and motion sickness measurements. Includes external alarm, car power adapter or will run from battery pack for >16hrs. USB interface for programming and download. Vibration Analysis cont’d. Texcel ATM Explosion and Ground Vibration Logger TEX,ATM (5036) AU Triaxial geophone and overpressure (airblast) micro- phone with logger used to determine explosion and ground vibration characteristics. Geophone range to ±55.6mm/s, resolution 0.014mm/s up to 6.95mm/s, 0.109mm/s up to 55.9mm/s. Microphone range 80-dBL to 140dBL, resolution 0.049Pa up to 122dBL (25Pa), 0.40Pa up to 140dBL (201Pa). Sample rate 20, 50, 100, 200, 500Hz & 1kHz. Bandwidth: geophone 4.5Hz to 500Hz, microphone 2Hz to 500Hz. Includes software and download cable. Internal memory 2Mb. Power internal 12VDC 7Ah batteries. Continuous operation 240h. Supplied with 90 to 260V 50/60Hz charger, recharge time 8h approx. 16 character LCD display, weatherproof enclosure, rated IP65. Operating temperature 0 to 70ºC, display 0 to 50ºC. Supplied with alarm light, reset button and 2 x 15m cable. External DC power supply cable also supplied. TR Viblog Vibration and GPS Logger TR,VIBLOG (5060) AU Incorporates a 3D accelerometer, a 3D gyroscope and a 10Hz GPS system. Logs 10 measurements per second. Records these measurements and also provides a Google Earth plot of the horizontal vibration and vertical vibration by location. A histogram of the vibration against velocity is provided also. The loggers battery lasts around 24hrs. Has sufficient memory to record 10 samples per second over this time. Speed Measurement Phantom 53550 Radar Gun with Case and Tuning Fork PHA,53550 (5324) AU Doppler K band (24.150GHz) stationary radar gun. Pull the trigger and the speed display appears instantly. Invisible to all radar detectors. Power requirements 10.5 to 16.5VDC, 13.5VDC nominal, 1.5A max, external source, connection via 1.8m coiled power cord with fused lighter plug. Operating environment -20 to 60ºC, 90%RH @ 37ºC (non-condensing). Accuracy ±0.17kph. Accuracy verification tuning fork (K-Band), internal 90kph. Speed range 17 to 332kph. Vehicle Counts PC2500 2 Channel Vehicle Volume & Speed Counter VEH,PC2500 (5320) AU Precision level system including an iPad with applications for Straighness, Squareness, Flatness, Spindle Parallelism, Spindal Perpendicularity, Shaft Level and Shaft Plumb.Angle can be measured to 0.001ºC,and flatness can be determined to 0.0025mm. Includes a magnetic fixture. Physical Measurement www.techrentals.com.au TR VMS CALIBRATION SERVICES Call for a quotation 1300 790 480 To minimise downtime, TR VMS provide a Booking Service to assist you in effectively and efficiently managing your equipment utilisation. Just call your nearest TR VMS office and arrange a date for the next available time slot. A quote will be provided stating that the equipment is to arrive at the TR VMS office the day before the work is due to be done. Simply sign the acceptance of the quote and return. You have the choice of a Hypercal Calibration Service, for when the calibration is urgent, and your job will be “next on the bench” and in most cases with a one day turnaround. There is a surcharge for this service. Otherwise utilise the Standard Calibration Service with up to 10 business days for calibration.
  • 58. 57 Is your major project? Telecommunication • Construction • Road or Rail infrastructure National Broadband Network • Power Generation With over 35 years experience TechRentals technical sales staff will assist you in delivering the right test and measurement solution for your major project. Whatever the duration, the best solution will be tailored to your requirements, making this part of your project simple and easy. With access not only to our vast inventory but to our global partners’ inventory you can be assured we will deliver the best solution for you. PROJECT RENTALS www.techrentals.com.au
  • 59. 58 Air Conditioning & Air Flow Air Conditioner Valve Balancing Concrete Testing Equipment Underground Services Location Utility Leak Detection Ground Penetrating Radar Pipeline & Cavity Inspection Material Moisture Meters Distance Measurement & Surveying Airflow AV2 100mmØ Anemometer NATA Certification AIR,AV2-NATA (5837) AU Specification as above but with NATA certification. Airflow 36 Pitot Tube AIR,PITOT-36 (5816) AU Pitot tube (36”) for use with manometers and micro manometers. Alnor EBT-721-A3 Electronic Micromanometer ALN,EBT-721-A3 MY Detachable multi-purpose digital manometer that can be used with the following test and balance tools, such as pitot, air foil, temperature, relative humidity probes or a 16-point velocity matrix. Differential pressure: ±15 in. H2 O, (3735 Pa) 150 in. H2 O maximum safe operating pressure. Absolute pressure: 15 to 40 in. Hg (356 to 1016 Hg). Velocity: 25 to 8,000 ft/min (0.125 to 40 m/s) pitot probes; 25 to 5,000 ft/min (0.125 to 25 m/s) air flow probe; 25 to 2,500 ft/min (0.125 to 12.5 m/s) velocity matrix. Volume: 25 to 2,500 ft3 /m (42 to 4250 m3 /h) capture hood. RH: 0 to 95% RH (optional probe), Temperature: -40 to 250°F (-40 to 121°C) probe dependant. Standard comes with 2ft x 2 ft, upon request additional hood of 2ft x 4 ft and 1ft x 4ft hood would be provided. Alnor EBT731 Balometer Electronic Balancing Tool ALN,EBT-731 MY Features a detachable multi-purpose digital manometer that can be used with the following test and balance tools, such as pitot, static pressure probe or a 16-point velocity matrix. Volume Range: 25 to 2,500 ft cube/min (42 to 4250 m cube/h) with capture hood. Velocity Range:25 to 2,500 ft/min (0.125 to 12.5 m/s) with velocity matrix. Unit comes with 2ft x 2ft,2ft x 4ft and 1ft x 4ft hoods. CSS Portable Smoke Generating Machine CSS,COLT4 (5890) AU Portable smoke generator with variable smoke emission rate. Suitable for air flow visualisation, HVAC ductwork leak-testing, fire training and general work. Pump-free operation with smoke fluid supplied from consumable aerosol cans. Manual or continuous operation and off-power facility. Maximum output 31 cubic meters/min at 1.5m visibility. Operation for 18min from one can at maximum capacity. Druck DP1705 Manometer 0 to 20kPa DRU,DPI705 (5808) AU Handheld digital manometer range 0 to 20kPa, accuracy 0.2%. Displays all common engineering units. Druck DPI705-IS Manometer 0 to 20kPa Intrinsically Safe DRU,DPI705-IS (5809) AU Hand held Manometer 0 to 20kPa range. Accuracy 0.2%. Displays all common engineering units. Intrinsically Safe. Shortridge ADM-860 Electronic Manometer SHO,ADM-860 (5812) AU Electronic micromanometer for air balance and similar applications. Measures differential pressure, air velocity and temperature using accessories included. Differential pressure range 0.0025 to 1500 mm water gauge. Air velocity range 7.5 to 3,000 m/min (750 m/min with velgrid). 100 point memory with sum and average. Accessories include pitot tube and a 16 point velgrid for face velocity work including exhaust hoods, clean room outlets, and large filters or coils. Testo 445 Vane Anemometer with 16mm Vane TES,445 (5842) AU Micro-vane probe. Simultaneous digital display of air velocity and temperature, with continuous-update, max, min & mean functions. Volume-flow option with entry of duct dimensions. Telescope mounted metal probe, vane 16mmØ. Operating range 0.4 to 60m/s, accuracy ±0.2 m/s, ±1%mv up to 40m/s. Temperature range -30 to 140ºC for short-term measurements. Selectable site-locations, and 3,000 point internal memory for manual saving or automatic data logging. Battery powered. TSI 8324 VelociCalc 100mm Vane Anemometer with Volume Display TSI,8324 (5839) AU Vane anemometer with 100mm head, supplied with handle and 900 mm articulated telescopic extension. Velocity measurement range 0.25 to 30m/s ±1%; temperature measurement range 0 to 80ºC ±0.5 ºC. Volume display range 0 to 4.36 x 106m3 /h with input for circular or rectangular duct dimensions. Variable time-constant; sample statistics average, max and min; and “sweep” mode for extended continuous sampling. Internal memory for single point measurements or time-based data logging, for up to 2849 samples and 1,000 test IDs, with serial interface, cable and software for data download. Direct data acquisition [polling] from PC terminal modes. Battery powered with auto-power-off, and optional AC adaptor. TSI 8373 Balometer With Logging TSI,8373 (5826) AU/MY Flow range 15 to 1,000l/s (54 to 3,600m3 /h); accuracy ±5% [to ±2.4l/s]. Operating temperature range 0 to 60°C. Includes 5 hood kit & hard case. Hoods provided 610 x 610mm (standard), 610 x 1,220mm, 305 x 1,220mm, 305 x 1,525mm & 915 x 915mm. TSI 8375 Accubalance Modular Air Balancing Tool TSI,8375 (5827) AU Balometer with detachable micromanometer (TSI 8710) for air balancing applications. With 610 x 610mm air capture hood for measurements in the range 42 to 4250m3 /h with automatic compensation for barometric pressure and air temperature, 45cm pitot probe [range 0.13 to 41m/s], 16-point velocity matrix probe [0.13-13m/s] and static pressure probes [differential pressure range ±3735Pa with safe limit 37kPa, absolute pressure range 47 to 135kPa. Accuracy typically 2% for pressure, 3% for flow. Large, multi-line backlit LCD display for single or statistical readings with min, max and average of up to 1,000 values of each measured parameter. Manual result storage or automatic data logging up to 1,000 time/date stamped readings. RS232 port for data transfer to PC or serial printer, with cable and “LogDat” download software. Rechargeable with approx 12h operation, or AC adaptor. Air Conditioning & Air Flow Air Conditioning & Air Flow cont’d. Construction, Building Services & Survey www.techrentals.com.au
  • 60. 59 Air Conditioning & Air Flow cont’d. TSI 8386A VelociCalc Air Conditioning Efficiency Meter TSI,8386A (5848) AU Portable efficiency measurement system for HVAC and related work, with hot wire anemometer, static and differential pressure, temperature and humidity measurement with heat flow efficiency calculation. Velocity (hot wire) 0 to 50m/s, accuracy ±3%. Temperature -10 to 60°C, accuracy ±0.3. Wet bulb temperature 5 to 60°C. Relative humidity 0 to 95%RH, accuracy ±3%. Dewpoint -15 to 49°C. Static/differential pressure -1,245 to 3,735Pa, accuracy ±1%. Probe length 100cm, tip diameter 7mm, base diameter 10mm. Includes data logging and printing. Battery operated. TSI 8705 DP-CALC Differential Micro-Manometer TSI,8705 (5815) AU Differential micro-manometer measuring differential pressure, velocity, average, volumetric flow, maximum and minimum. With static pressure calculations, density correction and K factor. Pressure range -1245 to 3735Pa. Velocity range 1.27 to 78.5m/s. Supplied with 200 to 980mm telescopic pitot tube. Datalogging (1,000 point) with RS232C interface and software. Battery powered. TSI 8710 DP-CALC Differential Micro-Manometer TSI,8710 (5813) AU Micro-manometer for static or differential pressure, velocity, volumetric flow, atmospheric pressure and temperature. With statistical analysis, density correction, K factor and automatic actual/standard flow calculation. Differential pressure range ±3735Pa. Velocity display to 41m/s (range depends on probe). Supplied with static tip, pitot tube, velocity matrix and temperature probe. Datalogging (1,000 point) with RS232C interface and software. Rechargeable cells or AC adaptor. TSI 9535 Anemometer with Logging Capability TSI,9535 (5845) AU Includes data captured download software and USB cable. Logs velocity and temperature. Will calculate flow rates. 0 to 30m/s Accuracy 3% of reading or ±015m/sec whichever is greater. Temperature range -18 to 93°C ±0.3°C. Runs 4 x AA batteries. TSI 9555 Multi-Function Ventilation Meter TSI,9555 MY Portable, hand held, multi-function ventilation meter. Comes with differential pressure and 966 articulate probe which measures air velocity, temperature and humidity. Calculations include air flow, heat flow, turbulence, wet bulb and dew point temperature. Velocity measurement: Range: 0 to 9,999 ft/min (0 to 50 m/s) , Accuracy: ±3% of reading or ±3 ft/min (±0.015 m/s), Resolution: 1 ft/ min (0.01 m/s). Temperature measurement: Range: 14 to 140°F (-10 to 60°C), Accuracy: ±0.5°F (±0.3°C), Resolution: 0.1°F (0.1°C). Humidity measurement: Range: 0 to 95% RH, Accuracy: ±3% RH, Resolution: 0.1% RH. TSI 9565A VelociCalc Air Conditioning Efficiency Meter TSI,9565A (5849) AU Portable efficiency measurement system for HVAC and related work, with hot wire anemometer, static and differential pressure, temperature and humidity measurement with heat flow efficiency calculation. Velocity (hot wire) 0 to 50m/s, accuracy ±3%. Temperature -10 to 60°C, accuracy ±0.3. Wet bulb temperature 5 to 60°C. Relative humidity 0~95%RH, accuracy ±3%. Dewpoint -15 to 49°C. Static/differential pressure -3,735 to 3,735Pa, accuracy ±1%. Probe length 1m, tip diameter 7mm, base diameter 10mm. Includes data logging and printing. Battery operated. USB & Bluetooth download. Air Conditioning & Air Flow cont’d. Vaisala WAA151 Wind Speed/Direction Transducer VAI,WAA151 (5886) AU Range 0.4 to 75m/s. Current output with selectable ranges including 4 to 20mA & 0 to 20mA. Requires indicator module such as DE,DT600 datalogger for indication of wind speed and direction. Air Conditioner Valve Balancing See also Data Loggers: Testo Temperature & Humidity Loggers on page 48 Tour & Anderson Scope Balancing Meter 1000kpa TA,CBI MY Digital pressure balancing instrument with LCD display. For cooling water valve balancing in air conditioning plants and similar applications. Firmware revision 3A. Includes facility for entry of Kv value to allow balancing of all hydronic valve types. Differential pressure range -0.5 to 20.5m water gauge at a total pressure of less than 200m. Resolution 0.001m. Flow resolution 0.001l/s. Battery operated. Tour & Anderson Scope Balancing Meter 1000kpa TA,SCOPE (5801) AU Digital flow balancing instrument with color display. For cooling water valve balancing in air conditioning plants and similar applications. Includes facility for entry of Kv value to allow balancing of all hydronic valve types. Differential pressurerange-0.5to20.5mwatergaugeatatotal pressure of less than 200m. Resolution 0.001m. Flow resolution 0.001l/s. Battery operated. TSI TA465A Multi-Function Ventilation Meter TSI,TA465A MY Portable, hand held, Multi-Function Ventilation Test Instruments. It comes with differential pressure. It also comes with the 966 articulate probe which measures air velocity, temperature and humidity. Calculations include air flow, heat flow, turbulence, wet bulb and dew point temperature. Velocity Measurement Range: 0 to 9,999 ft/min (0 to 50 m/s) Accuracy: ±3% of reading or ±3 ft/min (±0.015 m/s) Resolution: 1 ft/min (0.01 m/s) Temperature Measurement Range: 14 to 140°F (-10 to 60°C) Accuracy: ±0.5°F (±0.3°C) Resolution: 0.1°F (0.1°C) Humidity Measurement Range: 0 to 95% RH Accuracy: ±3% RH Resolution: 0.1% RH. Concrete Testing Equipment See also Endoscopes, Borescopes & Visual Inspection on page 41 See also Ground Penetrating Radars on page 61 See also Pipeline & Cavity Inspection on page 61-62 Elcometer 331-B Basic Cover Meter ELC,331-B (4924) AU/MY Displays depth and orientation of the reo bars. Deep search head supplied. 40mm diameter bar depth 35 to 180mm depth, 8mm diameter bar depth 25 to 160mm depth. Rechargeable battery allows 32h of continuous operation (20h with backlight). Construction, Building Services & Surveywww.techrentals.com.au
  • 61. 60 Concrete Testing Equipment cont’d. Elcometer 331-SH Cover Meter with Half Cell Measurement ELC,331-SH (4919) AU Displays the depth and orientation of the reo bars. Standard search head. 40mm diameter bar depth 15 to 95mm. 8mm diameter bard depth 8 to 70mm. Rechargeable battery allows 32h of continuous operation (20h with backlight). Autosizing of bars or orthogonal measuring of bar sizes. Internal storage of readings of depth of cover in batches which can be downloaded to PC with supplied software. XP and Vista supported. Hilti PS20 Rebar, Copper Pipe & Electrical Cable Locator HIL,PS20 (4920) AU Localise and position of reinforcement, (rebars) copper, aluminium pipes and unshielded live electric cables. Depth range for detection of rebars 0 to 100mm, for copper & aluminium pipes 60mm, rebar diameter 8 to 36mm, depth detection accuracy 10 to 30mm ±2mm, above 30-60mm ± 2mm ±10% depth, above 60 to 80mm ±5mm ±10% depth, based on 12mm rebars. Detection of copper & aluminium pipes based on 10 to 30mmØ, only detection with depth of 0 to 60mm, no depth reading, same for live electric cables, cannot detect live cables in metal conduit or shielded cables. Hilti PS200 Ferroscan System HIL,PS200 FERROSCAN (4921)AU Portable, quick and easy to use for detecting rebar and other ferrous objects in concrete structures. Provides accurate on-site rebar location, depth and diameter with the PS 200M monitor. Scans can be evaluated on the monitor or transferred to a PC or laptop for further evaluation and report generation. Portable wireless operation, easy integrated LCD display makes setting up the scan easy while providing information over the scan process. Fast data download via infra red beam from scanner to monitor. Convenient Scanner stores up to 9 image scans and 30m of Quickscans. Hilti PS38 Multidetector HIL,PS38 (4918) AU Designed to detect objects such as ferrous metals (rebars), non-ferrous metals (copper and aluminium), wood beams, plastic pipes, electric cables in dry materials. Detects at depth up 120mm. Location accuracy ±15mm. Depth accuracy ±5mm. Minimum distance between two objects 40mm. Hilti PS1000 X-scan Concrete GPR System HIL,PS1000 (4922) AU A GPR system with 3 transmitters and 5 receivers that has been designed to provide a 3D image of the location of reinforcement bars and other metallic and non-metallic objects in concrete. Accuracy ±10mm. It will measure to a depth of 300mm. Handy Search NJJ-95B Reinforced Concrete Radar JRC,NJJ-95B (4923) AU Ground Penetrating Radar (GPR) technology applied to the location of reinforcement in concrete. Unit will search to a depth of 300mm. Display is very easy to interpret (scanned images). Scan information can be saved to a memory card for transfer to a PC. A 3D image of the slab can be generated using PC software. Can be used to detect voids in concrete and the concrete depth is easy to determine from the image. The location of non-metallic objects can also be determined. Concrete Testing Equipment cont’d. Olson FTG Concrete Thickness Gauge OLS,CTG (4929) AU Concrete thickness gauge utilising the impact Echo test method. Can measure concrete thickness in two ranges: 6 to 60cm and up to 1.8m. This concrete thickness gauge is a battery operated handheld system for measuring the flaws and thickness of concrete slabs, pavements, walls and other plate-like structures from one side. Up to 300 readings can be stored in the field before the memory is full. RS232 interface and transfer software supplied. Proceq 2000-ND Digi Schmidt Test Hammer PRO,2000-ND (4930) AU Concrete hardness tester (Schmidt hammer). Supplied complete with inbuilt graphical LCD for setting up and graphical display of results, up to 500 results can be stored. RS232 interface and software supplied for down loading. Impact energy 2.207Nm. Engineering units of results in N/mm2 , MPa, psi, kg/cm2 . For concrete thickness greater than 100mm. Proceq Profoscope Rebar Locator & Cover Meter PRO,PROFOSCOPE (4926) AU Rebar locator and covermeter. Short range measurements to 95mm ±3mm accuracy. Long range 185cm accuracy ± 4mm. The unit will determine the position of the rebars, the mid point between rebars, Concrete cover, estimation of bar diameter & the orientation of the rebar. Powered by 2 x AA batteries. Battery life 15h with backlight 55h without. Proceq Resistivity Meter PRO,RESIPOD (4925) AU Can determine the likelihood of corrosion and the corrosion rate in concrete. 0 to 1,000kΩ measurement range. USB interface, USB charging. Waterproof. Proceq SilverSchmidt UN Concrete Test Hammer PRO,SIL-UN (4928) AU Requires no corrections for angle of test, simple one button operation, datalogging capability with USB download with detailed reporting capability. Impact energy 2.207Nm. Compressive strength range 10 to 170MPa. Battery Life >1,000 Impacts before recharging is required. Protimeter Moisture Measurement System PRO,MMS-PLUS (4955) AU Moisture meter for detection of moisture in non conductive solid materials such as wood and masonry. Two measurement modes, search for qualitative measurements and measure mode for precise and localised moisture content. Supplied with pin type probes, deep wall probes, hygrometer probe and extension cord for RH, ambient temperature or dew point temperature. Hygrostick probe supplied for surface temperature measurement. Logging software and RS232 computer interface supplied. See also Material Moisture Meters on page 62 Construction, Building Services & Survey www.techrentals.com.au
  • 62. 61 Underground Services Location See also Prospecting Metal Detectors on page 70 CScope CATXDSGV-KIT Cable and Pipe Locator CSC,CATXDSGV-KIT (3730) AU CSC,CATXDSGA-KIT MY Industry standard locator used to determine the exact location of buried pipes and cables. Functions include; Power mode for detecting live imbalanced cables to a depth of 3m, Radio mode for detecting re-radiated radio signals to a depth of 2m and Generator mode for detecting conductors carrying the signal generated by the C.Scope signal generator. Vivax VLOCPRO Pipe and Cable Location System VIV,VLOCPRO (3740) AU Pipe and Cable locator with intuitive menu system, colour display, peak, null, left/right and orientation (compass) response to support your preference. Configured with 6 location frequencies, power and radio modes. 10 watt transmitter can apply the location signal by connection, induction and signal clamp. Depth detection up to 6 to 9 meters in broad-peak mode. Utility Leak Detection Gutermann Aquascope 3 Leak Locator GUT,AQUASCOPE3 (3820) AU Listens for the sound of a leak. Specific digital signal processing, designed to remove electrical noise and provide the operator with only the sound of the leak. Includes both ground and hand probe microphones. The display indicates the level of the noise from the leak. That way you can determine when you are nearest to the leak i.e. when the level is at its highest, you are nearest to the leak. Ultra Probe UP100KT Ultrasonic Leakage Detector ULT,UP100KT (3825) AU Hand held pistol type with stainless steel sensor enclosure. Frequency reponse 20 to 100kHz, (centred at 28 to 42kHz), 10 segment LED bargraph (red). Sensitivity 8 precision attenuation. Response time 300ms, operating temperature range 0 to 50°C. Kit includes contact stethoscope module with different wave guide extension rods for direct for use on pipes, bearing housings, steam traps, etc. Rubber focusing probes, head set, warble tone generator for determining leaks in seals of empty containers, etc. Ground Penetrating Radar See also Concrete Testing Equipment on page 59-60 USRadar Ground Penetrating Radar System USR,SEEK-SPR (3601) AU Designed to locate buried objects. Typically used for the location of cables and pipe, detection of pipe and the detection of underground storage tanks. For targets as small as 5cm diameter and up to 4m depth. Pipeline & Cavity Inspection See also Endoscopes Borescopes Visual Inspection on page 41 Aqua Snakeeye Video Inspection System AQU,SNAKEEYE3 (5166) AU Handheld video system for remote inspection work. Very light and compact. Includes a 12.7cm TFT-LCD display and 3cm diameter camera including illumination. Various adapters are supplied for mounting the camera to: a) your hand b) a 45.7cm arm with 90 degree articulation, c) a 30m extension cable or d) an arm which extends from 1.6 to 3.6m. Includes memory card and will save images to card. Archos AV 500 Mobile Digital Video Recorder - 100 GB ARC,AV500 (5188) AU Unique mobile digital video recorder offering direct TV recording and the best of video, photo and music on the go on a 4” colour screen, 100 GB hard drive. Easy setup pod for TV recording & video playback , control your VCR, cable or satellite receiver. Record directly to TV or make scheduled recordings, photo wallet & music player. Stores up to 400 hours of video, 250 movies or 1 million photos. Testo Fibrescope 1.2m with Guide Tube TES,319 (5170) AU Supplied with guide tube, 45 degree mirror & magnetic tip. Number of pixels 6,000. Fibre- optic field of view 50°. Angle of field of view 45° ±5°. Min focus distance 15mm (focus). Max focus distance 150mm (light). Operating and storage temperature: -20° to 60C. Working temperature/probe -20° to 80°C. Probe diameter 6.5mm. Probe length 1247 mm ±6. Max bending radius 50mm. Light source LED 2 point light. Probe resistance: probe tip water-proof up to handle short-term resistance to silicone oils, petrol and kerosene. Oils or petrol must be wiped off immediately after immersion. Battery type 3AA batteries. Battery life 4h. Note: the magnetic tip can be used to remove small magnetic objects. Vivax Pipeline Camera Inspection System VIV,VCAM-60M (5155) AU 60 meter pipeline inspection system with self leveling camera (D33/SL, 41mm diameter) will record MPEG4 videos and provides a keyboard, titler and sound system to add up to 16 pages of text and an audio commentary. Can be uploaded via a USB interface to a computer allowing copies to be made or images to be captured for inclusion in reports. Camera includes a sonde with 512Hz, 640Hz and 33kHz modes. Submersion depth up to 1 bar (10m). Vivax Pipeline Camera Inspection System VIV,VCAM-120M (5196) AU 120 meter pipeline inspection system with self leveling camera. Will record MPEG4 videos and provides a keyboard, titler and sound system to add up to 16 pages of text and an audio commentary. Can be uploaded via a USB interface to a computer allowing copies to be made or images to be captured for inclusion in reports. Camera includes a sonde with 512Hz, 640Hz and 33kHz modes. Construction, Building Services & Surveywww.techrentals.com.au
  • 63. 62 Pipeline & Cavity Inspection cont’d. Wohler VIS2000Pro 30m x 51mm Colour Camera & Roller Guide WOH,VIS2000PRO (5164) AU Suitable for inspection of ventilation ducts, chimneys, chambers and flue gas systems, etc. Kit consists of colour display with a joystick to control camera. 30m push rod cable on a reel, with a non-waterproof, splash resistant (IP64 rated) 51mm diameter colour camera with illumination. Accessories include a Roller Guide to allow the camera to be pushed down a pipe. Can save still images and video to a memory card. Video out function. Wohler VIS340 Service Camera Visual Inspection System 30m WOH,VIS340-PT (5160) AU WOH,VIS340 MY Compact colour video inspection system with 26mm forward facing and 40mm Pan Tilt colour cameras. Viewing angle 120°, waterproof according to IP68(3 bar-30m) and IP67(2 bar-20m) respectively. Bright white LEDs on 30m of flexible push rod with metric markings. Battery powered 7” high resolution colour screen with removable monitor and SD video recording. Applications incl damage analysis in water/ drainage/sewer pipes, inspection of hollow spaces, ventilation, machines, control panels, exhaust systems and production surveillance. Material Moisture Meters See also Concrete Testing Equipment: PRO,MMS-PLUS on page 60 Protimeter SM Moisture Meter PRO,SM (4954) AU Moisture meter for survey work. Very good for determining wet points. Will provide % moisture content for timber. Subsequent accurate measurements can then be made. Distance Measurement & Surveying See also Light Meters, UVA/B/C Measurement on page 68 ikeGPS Precision GPS and Laser Distance and Camera System IKE,300PRO (5301) AU Intergrated precision GPS (1.5m), laser based range finder (300m), Precision compass, precision inclinometer and camera system. Used to geolocate and document. It can be used to remotely dimension cable and buildings, etc. Construction, Building Services & Survey www.techrentals.com.au REMOTE CONCRETE POUR TEMPERATURE SENSING AND SAMPLE CONTROL USING MODBUS TechRentals have developed a simple solution for the monitoring of the concrete curing process that also provides ‘matched temperature’ control of the concrete pour samples. The benefits include a more accurate estimation of concrete strength and potential shortening of the period before additional construction can commence. An application of the Modbus protocol has enabled the efficient implementation of concrete pour temperature remote monitoring and also control of the storage environment of concrete test. The system is sufficiently undemanding in installation for it to be supplied as a rental system however many users would find it practical to have it as a standard tool. A dataTaker model DT80M logger is used to gather 30 channels of thermocouple data at the concrete pour and the data is linked to a second DT80M at a remote office location. The site data is monitored for obvious errors and faulty thermocouple data is automatically rejected. The office logger controls a thermal bath and maintains this as an accurate analogue of the site concrete pour temperature. Site samples are placed in the bath and thereby are maintained in closely matched conditions to those in the construction. The samples can therefore be subjected to mechanical testing with a high degree of confidence. This together with the precise monitoring of the site curing process considerably increases the confidence in the state of the concrete. This allows for earlier formwork striking times with an earlier start to prestressing and consequently significant savings. This system is simple to implement with the baths currently in use. The first implementation of the system was in a remote location in Queensland. The dataTaker data loggers and associated hardware are available from TechRentals who also wrote the associated software. TechRentals sales engineers are always ready to offer advice on any aspect of test and measurement instrumentation selection and use.
  • 64. 63 Environmental Gas & Vapour Meters Personal Gas & Vapour Monitors Airborne Dust & Particle Meters Air Quality & Heat Stress Moisture & Humidity Meters Noise & Sound Analysers Radiation Monitoring & Protection Floor Slip Testers Water Quality, pH Meters & Eletrochem Light Meters, UVA/B/C Measurement Weather Stations Environmental Flow Meters Laboratory & Hand-held Microscopes Balances & Scales below 8kg Chemical & Analytical - General Laboratory Instruments, Spectroscopy See also Combustion, Flue & Industrial Gas Analysers on page 50 Aeroqual 500L Portable Logging Ozone Monitor AER,500L (5958) AU Portable ozone monitor fitted with low concentration- range detection head. Operating range 0 to 0.5ppm ozone with display in ppm or mg/m3 . Gas sensitive semiconductor [GSS] sensor for accurate low-level measurements, T90 response approximately 100s. Operation from mains power supply or battery pack (4h operation). Internal data logging for 8,000 points with software and cable for download to PC, or data logging direct to PC. Application for indoor air quality measurements. Geotech Landfill Gas ExMonitor GEO,GEM5000 (5940) AU Measures CH4 , CO2 , O2 , CO & H2 S. Designed for spot measurements. Intrinsically safe and has a built in GPS system. It can also measure flow rates from bore holes and perform landfill gas energy calculations. GasCheck 3000 Portable General-Purpose Leak Detector ION,GASCHECK3000 (5906) AU Micro thermal-conductivity sensor for high-sensitivity detection of gases with a thermal conductivity different to that of air, including helium, carbon dioxide, refrigerants, sulphur hexafluoride, natural gas, etc in 5 groups. Direct reading of leak rate in ml/sec with audio and visible signals. Detection limit for helium 2E-5ml/s. Battery Powered. Ion Science Gascheck Helium, Butane & SF6 Detector ION,GASCHECKG3 (5907) AU/MY Microthermal conductivity gas detector. Reading in cc/s, g/yr, mg/m3 or ppm. Detects most gases however particularly suited to ammonia, argon, butane, helium, hydrogen & SF6. Calibrated against Helium. Battery Life 40h. Sensitivity (cc/s) He 1x10-5, CH4 5x10-5, R12 5x10-5, Ar 1x10-4. Accuracy 5% of displayed reading + 1 digit. Response 1s. Flow rate 2cc/min. Operating -20 to 60°C. Data logging, stores 10 readings. Oldham MX21 Plus Gas Monitor for Sulphur Dioxide SO2 OLD,MX21-SO2 (5927) AU Portable gas detector for personal, workplace or space monitoring of sulphur dioxide (SO2 ) in the range 0 to 30ppm. Operation in passive or pumped modes, with sampling tube and flexible probe. Data logging, with software included for download to serial printer or computer. Rolling storage of up to 48h data (at 1min intervals) in multiple groups. Rechargeable battery. PetroSense PHA-100 Petroleum Hydrocarbons in Water Detector PET,PHA-100 (5945) AU Portable hydrocarbon analyser for insitu realtime petrochemical contamination. Measures Total Petroleum Hydrocarbons (TPH) in water and water vapour. Uses a fibre optic chemical sensor (FOCS). Measures 0.1ppm xylene in water ad < 10ppm in vapour. Accuracy ±15% of readings. Response time <5sec. Certified to EPA Method 8020. Photovac 2020 Portable PID VOC Monitor PHO,2020PRO (5950) AU Portable handheld VOC (Volatile Organic Compound) monitor with data logging. PID sensor (Photo-Ionisation Detector) fitted with 10.6eV lamp. Ranges 0.5~2000ppm humidity compensated. Downloadable data logging for 15,000 points with time, data and header. Intrinsically safe. PPM 400 Portable Formaldehyde Meter PPM,FORM400 (5962) AU Portable Formaldehyde meter for measuring airborne formaldehyde in the workplace. Electrochemical sensor, with internal pump for rapid response. Operating range 0.05 to 10ppm with readout on 4 digit LCD display. Kit includes field calibration standard. Operates from 9V alkaline battery. RAE Systems Minirae 2000 Portable PID RAE,MR2000 (5950) AU Portable handheld VOC (Volatile Organic Compound) monitor with data logging. 3-D PID sensor (Photo- Ionisation Detector) fitted with 10.6eV lamp. Ranges 0 to 999ppm (resolution 0.1) or 100 to 10,000ppm (resolution 1) VOC expressed as isobutylene. Built-in correction factors for 102 compounds from a total standard library of 250. Integrated pump for local or remote (30m) sampling, with stall protection against liquid ingress. Downloadable data logging for 1,500 points with time, data and header. Intrinsically safe. Up to 10h operation with rechargeable (NiMH) or alkaline batteries. Environmental Gas & Vapour Meters Environmental Gas & Vapour Meters cont’d. Environmental, OHS, Chemical & Laboratorywww.techrentals.com.au
  • 65. 64 Environmental Gas & Vapour Meters cont’d. Minirae 3000 Advance Handheld VOC Monitor RAE,MR3000 MY Handheld volatile organic compound (VOC) detector. Photoionization Detector’s (PID) extended range of 0 to 15,000 ppm, ideal For applications from industrial hygiene, to leak and HazMat detection. RF modem allows real-time data transmissions with a base controller located up to 500 feet (or two-miles with optional RAELink3 portable modem) away from the MiniRAE 3000 detector. A personal computer can be used as the base station for a Mini-RAE 3000 system. RH Systems 973-SF6 Analyser RH,973-SF6 (5910) AU Measures the purity of SF6 gas. Uses a fast acting mirror system to measure humidity. Displays direct % purity. Includes a gas recovery system. Includes built in test for instant verification of the system accuracy. Dew Point measurement -55 to 20°C, pressure 0.1~30 Bar. Accuracy ±0.5° dew point. Gas coupling is done via a quick connect fitting. Wika GA-15 SF6 Leak Detector WIK,GA-15 (5909) AU A fast response SF6 leak detector which will detect concentrations of SF6 down to 3ppmv. Only detects SF6 and is unaffected by moisture and wind. Personal Gas & Vapour Monitors BW Bump & Logging Download for BW,MICROCLIP BW,BUMP (5938) AU/MY Automatic calibration testing and data management system for the BW microclip gas detection equipment. Carries out fully automatic “hands-free” calibration and functional bump test. It also enables data collected during operation of the BW microclip to be downloaded. BW Gas Alert Micro Clip Confined Space 4 Gas Detector BW,MICROCLIP (5937) AU/MY Continuous LCD shows real time gas concentrations. Simple1buttonoperation. Measures:-H2 S0to100ppm (1ppm resolution), CO 0 to 500ppm (1ppm resolution), O2 0 to 30% (0.1% resolution) and Combustible gases 0 to 100% LEL (1% resolution), 0 to 5% v/v (0.1% resolution). Alarms: visual, vibrating and audible (95dB), Low, High, STEL, TWA and OL (over limit). Lithium polymer battery life 12hrs (typical) recharge time <3hrs. BW Sampling Pump for BW,MICROCLIP BW,GA-SPAK (5939) AU/MY Motorised sampling pump that provides 300ml/min for remote sampling up to 18m away. Runs continuously for 30hrs on batteries. Includes 3m sampling hose. Includes built in water traps and particulate filter. Airborne Dust & Particle Meters Abacus 301 Hand-held Airborne Particle Counter ABA,301 (5878) AU Portable particle measuring system typically used in clean room applications. Four fixed size channels 0.3, 0.5, 1.0 & 5.0 micron. Count data automatically stored in a 500 sample memory which can be downloaded to a PC. Selectable sample time. Includes zero count filter for checking backgrounds. When used with included software will check clean rooms to ISO 14644 and BS5295 requirements. Battery operated. TSI 8520 DustTrak Airborne Particle Monitor TSI,8520 (5872) AU Portable aerosol monitor. Laser photometer with 90ºC scattering detection, Range: 0.001 to 100mg/m3 [Calibrated for A1 test dust, ISO 121203-1], resolution: 1% of reading or 0.001mg/m3 ; particle size range: 0.1 to 10μm. Internal pump flow rate 1.4 to 2.4l/min (1.7 nominal). Data logging 30,000 data points (21d@1min), log interval: 1s to 1h. RS232C interface and software included. Battery operated. TSI 8520-1 Environmental Enclosure for DustTrak TSI,8520-1 (5874) AU Weatherproof outdoor housing for TSI,8520 aerosol monitor. Rugged case with tripod mount, fitted with sample inlet and water trap. Includes extended- life battery pack and charger/adaptor. TSI 8525 P-Trak Ultrafine Particle Counter TSI,8525 (5877) AU Range 0.01 to 5 x 105 particles/cm3 . Particle size range 0.02 to greater than 1micron. Includes PC software and cable. Suitable for detection of ultrafine particles associated with pollutants. Battery powered (8h operation using alkaline batteries). TSI 8530 Aerosol Monitor and Logger TSI,8530 (5873) AU/MY Portable dust and particle monitor, light scatter photometer. Measure concentrations corresponding to PM1, PM2.5 & PM10. Aerosol concentrations 0.001 to 150mg/m3 . Used for industrial/occupational hygiene surveys, indoor air quality monitoring, outdoor environmental monitoring, baseline trending and screening, etc. TSI Environmental Enclosure for the TSI,8530 TSI,8530-ENC (5875) AU/MY Enclosure to suit the TSI,8530. Includes two additional batteries and charger. Includes waterproof enclosure and heat shield and enclosure stand. TSI Environmental Enclosure for the TSI,8530 Dusttrak II TSI,8530-ENC-S (5876) AU Enclosure to suit the TSI,8530. Includes two additional batteries and charger. Includes waterproof enclosure. TSI 8533 Aerosol Monitor and Logger TSI,8533 (5870) AU Portable dust and particle monitor, light scatter photometer. Measure concentrations corresponding to PM1, PM2.5 and PM10. Aerosol concentrations .001 to 150mg/m3. Used for industrial/occupational hygiene surveys, indoor air quality monitoring, outdoor environmental monitoring, baseline trending and screening etc. Will size particles in three sizes PM1, PM2.5 and PM10. Environmental, OHS, Chemical & Laboratory www.techrentals.com.au
  • 66. 65 Airborne Dust & Particle Meters cont’d. TSI AM510 Personal Aerosol Monitor; CSA & ATEX IS approvals TSI,AM510 (5871) AU Wearable dust monitor. Built in Impator allows you to chose either ‘none’, 1, 2.5 or 10μm particle sizes. Datalogs TWA in the range of particle concentrations from .001 to 20mg/m3 Runs 9.2hrs on rechargeable NiMH batteries. USB download capability. CSA & ATEX IS approvals. Air Quality & Heat Stress Casella Microtherm WBGT Area Heat Stress Monitor CAS,MICROTHERM (5868) AU Portable area heat stress WBGT monitor with real-time graphical display. Measures heat stress potential [WBGT index] according to ISO7243. PRTD sensors with internal calibration-reference for wet-bulb, dry-bulb and globe temperatures. Large LCD display for numerical or graphical indication of temperatures and processed values for WBGT [indoor/outdoor plus TWA], relative humidity and dewpoint. Simple keypad/menu setup. Data logging for up to 32 separate runs and 49,100 records, with interval 30s to 1h. RS232C port with included PC software for download and reporting or realtime display. Low water-level warning, and settable audible/visible WBGT alarm. Handheld, free-standing or tripod-mount. Battery operated. Testo 635-2 Humidity, Temperature & Dewpoint Meter TES,635-2 (5859) AU Portable humidity meter fitted with robust stainless probe with sintered filter-cap for general or duct measurements to 120ºC, and fast-action K-type surface temperature probe. Displays relative humidity, absolute humidity, dew point, degree of humidity, enthalpy, temperature, and differential temperature (dewpoint to surface). Operating range 2 to 98%RH (±2%). Air temperature -20 to 120ºC (±0.2/0.5). Surface temperature -60 to 300ºC (±0.1). Internal memory for 10,000 values with USB interface, cable and software for download and presentation. Battery operated. Testo 645 Humidity & Dewpoint Meter TES,645-1 (5858) AU Portable humidity meter fitted with robust stainless probe for ambient work or duct measurements to 120°C. Displays relative humidity, absolute humidity, dew point, degree of humidity, enthalpy and temperature. Operating range 2 to 98%RH [±2%], -20 to 120°C [±0.4/0.5]. Battery operated. TSI Q-TRAK IAQ Monitor CO2 , CO Temperature & Humidity Logger TSI,7565 (5861) AU Measures CO2 0 to 5,000ppm ±3%, temperature 0 to 60ºC ±0.6ºC, humidity 0 to 95% ±3%, CO 0 to 500ppm ±3% and barometric pressure 517.15 to 930.87mmHg ±2%. Calculates dew point, wet bulb and percent outside air. Displays 5 measurements simultaneously. User selectable logging interval and start stop times. Stores 39 days data at 1min intervals 56,035 data points. This unit also has external thermocouple measurements. Air Quality & Heat Stress cont’d. TSI Q-Trak plus Indoor Air Quality Monitor with Logging TSI,8554 (5860) AU/MY Indoor air quality (IAQ) monitor for temperature and humidity measurements, CO and CO2 concentrations. Humidity range 0 to 95%, temperature range 0 to 50°C. Electrochemical cell for CO 0 to 500ppm. NDIR cell for CO2 0 to 5,000ppm. Data logging for 48,671 data points with interval adjustable 1s to 1h. Fitted with RS232 interface, and software included for download, storage and reporting. Battery or mains operation with AC adaptor. Moisture & Humidity Meters GE Panametrics PM880 Industrial Moisture Analyser PAN,PM880 (5911) AU Intrinsically safe moisture analyser for compressed air systems, non-corrosive gases & hydrocarbons such as natural gas (IS certification to ATEX and CSA). Displays dew point, moisture concentration, pressure & temperature. Dew point calibrated measurement range -80 to 20°C with data to -110°C. Pressure range 7 to 69 Bar limited by sensor, gauge and safety-valve (operating range from 5μHg). Temperature range -30 to 70°C. Gas flow operating range from static to 10,000cm/s velocity. Supplied with compact sample system with gauge, safety-valve, sampling valves and fittings (¼” Swagelok). Data logging of up to 100K moisture points, with infrared port and software for download. Battery powered only (15-24h operation) with second battery and charger (note charger is not IS). Noise & Sound Analysers See also Vibration Analysis on page 55-56 ARL EL-316 Environmental Noise Logger Type 1 ARL,EL-316 (5695) AU Environmental noise logger with display for field- reading of summary results. Portable, self-contained and weatherproof. Type 1 performance, continuous 90dB dynamic range, fast response, frequency weightings A and C. Monitors environmental noise continuously for up to 3 weeks, calculates and stores over 7,500 sets of Ln indices. PC required to set up system and download data using software supplied. Set up also possible from front-panel. ARL NGARA Environmental Noise Logger ARL,NGARA (5690) AU Can be configured to record all sound continuously so noise data can be post processed. It can prove logged data, WAV data & alarm/triggered details. Type 1 microphone provided. Environmental, OHS, Chemical & Laboratorywww.techrentals.com.au Save your time and reduce your real costs. Find out all about our Configuration and Download solutions on page 37.
  • 67. 66 Noise & Sound Analysers cont’d. B&K 2238E Type 1 Integrating SLM Enhanced Software & Logging BK,2238E-NATA (5678) AU Type 1 (class 1) Integrating sound level meter with additional functions including enhanced software, frequency analysis and data logging. Standard routines include functions for workplace measurements and general sound-level checks; enhanced software (firmware) offers additional measurements and statistics for assessment of environmental noise problems; frequency analysis automates measurements in the 9 single octave bands and 29 1/3 octave bands. Supplied with field calibrator. Compatible with BK,7815 Noise Explorer Environmental software for download, data analysis and display. B&K 2239A Type 1 Sound Level Meter NATA Certification BK,2239A-NATA (5667) AU Type 1 (class 1) integrating sound level meter with backlit LCD display, NATA certification. Simultaneous RMS (A,C) & peak (C) detection with independent frequency weightings. Measuring range 30 to 140dB. Time weightings fast, slow and impulse. Parameters Leq, MaxP, MaxL, MinL, Peak, SPL and Inst. Memory for 40 data records with realtime clock. Serial port for data download. Calibrator included. Operates with 4 x AA alkaline batteries. B&K 4448 Badge Dose Meter IS Kit of 3 BK,4448-IS-3KIT (5680) AU Kit of 3 Intrinsically safe noise dose meters. The kit includes a NATA calibrated 4231 Type 1 calibrator. These are badge type Dose Meters, shoulder mounted, cable free and simultaneously measure all parameters required by noise at work standards. Simple two button operation. Rechargeable battery provides several working days of measurement. Digital Audio Test Set comprising of NTI Digirator & NTI Digilyser NTI,NT-DAS (5684) AU Audio Excel Line for digital audio signals. System including the Digilyzer and Digirator for producing digital audio signals and analysing those digital audio signals up to and including 5.1 surround sound. Up to 192kHz 24bit, AES3,S/ PDIF, TOSLINK & ADAT. ync input (AES3, Word Clock, Video). Supports Dolby Digial, E, PL II, DTS. Channel transparency check. Channel delay measurement. NTI XL2+M2210 Sound Level Meter NTI,XL2+M2210 MY Sound Level Meter comes with Class 1 microphone, acoustical analyser options and audio analyser options. Applications in sound installations, live sound, studio, broadcast and environmental noise measurements. Logging all data or subsets in selectable intervals. Recording of wav-files (ADPCM), a new wav-file starts every 12 hours (max. wav-file size 512 MB). Real time analyzer with frequency resolution: 1/3 octave, 1/1 octave, wide band and frequency range: 6.3Hz to 20kHz. Frequency weighting: A, C, Z. USB interface with PC analysis tool. Quest 2400 Type 2 Sound Level Meter QUE,2400 (5660) AU Type 2 sound level meter with LCD display for sound pressure level [SPL] or maximum level [MAX]. Frequency weightings A and C, time weightings Fast and Slow. Ranges 30 to 140dBA and 40 to 140dBC with overload indication. AC and DC outputs. Battery powered. Noise & Sound Analysers cont’d. Rion NL-04 Sound Level Meter RIO,NL-04 MY Meets IEC type 2. Five measurement functions: Lp(SPL), Leq, LAE, Lmax & Lx(L5,L10,L50,L90,L95). 6 automatic measurements & data store. Built-in RS232C interface for computer communication. 70dB dynamic range (digital display), 27 to 130dB (A) measuring range. Wide range of time settings for Leq, LAE, Lmax & Lx; 10s, 1, 5, 10, 15, 30min, 1, 8, 24h & manual time setting (up to 99h 59min 59s). RMS: fast, slow,10ms. 4 digit LCD display, 0.1dB resolution, updated every second, plus 60dB analogue display display 1dB resolution showing the instantaneous value. Memory battery back-up. AC & DC signal o/p for level expanding system by optional filters, memory card & others. Rion NL-32 SLM with RTA & NATA Certification RIO,NL-32RTA-NATA (5674) AU RIO,NL-32RTA MY Precision integrating sound level meter to IEC type 1 (class 1) specification, with NATA calibration. Fitted with internal Compact Flash Card reader and supplied with NC-74 field calibrator. Frequency range 20 to 20,000Hz with weightings A, C, and flat. Time weightings fast, slow and impulse. Measurement range (A) 28 to 138dB. Broadband measurement functions Lp (SPL), Leq, Lmax/min, Lae, Lx, and selectable auxiliary functions with manual or auto storage [logging]. Measurement time (Leq) from 10s to 200h. Inbuilt memory for up to 100 data sets, or to limit of fitted CF card using manual or auto storage. AC or DC outputs, RS232C interface and cable CC- 93 for serial printer. Supplied with NX-22RT card for real time 1/1 and 1/3 octave analysis and display, for measurement functions Lp, Leq, LE, Lmax and display of AP (all-pass) AP(A) and 1/1 or 1/3 octave values as selected, with manual data storage only to NX-22RT card. Download of card-data to PC requires flashcard reader. Alkaline batteries (24h operation) or AC adaptor. Rion NL52EX SLM with NX42RT Octave and 1/3 Analyser RIO,NL52EX-NX42RT (5670) AU Type 1 Sound Level Meter, including the Octave and 1/3 Octave measuement option NX42RT. This meter can be used to check NC levels for compliance checking. The instrument includes a NATA calibrated calibrator. All data is save to an SD card. Radiation Monitoring & Protection See also E & H Field Strength Meters on page 11-12 Fluke 481 Radiation Survey Meter FLU,481 (5580) AU Provides exposure measurements in mR/hr to 50R/h (0.55v/hr). Detects skin-dose, deep-dose and X-ray radiation. Measures dose & dose rate. HPI Cypher 5000 Digital Radiation Alert Monitor HPI,CYPHER5000 (5583) AU Alpha, Beta, Gamma and X-ray radiation monitor. Meter, LED, audible indication and detachable probe. Range 0.1 to 1,000,000 CPM; Accuracy 1% or 2 digits. Narda 8217 Microwave Oven Survey Meter NAR,8217 (5553) AU For oven power measurement complete with beaker and thermometer. Calibration frequency 2.45GHz. Measurement range 0.5 to 10mW/cm2 . Battery operated. Environmental, OHS, Chemical & Laboratory www.techrentals.com.au
  • 68. 67 Radiation Monitoring & Protection cont’d. Narda RadMan Personal RF Field Radiation Monitor NAR,RADMAN (5557) AU Personal monitor and leakage detector for high frequency electromagnetic fields. Simultaneous E and H field measurements with audible and visual alarms. Frequency range H field 27MHz to 1GHz; E field 1MHz to 40GHz. Operation as personal monitor with compensation for human body absorption, or with isotropic detection for RF leakage sensing and simple four-level measurement using LED indicators. Battery powered. Battery life over 200h. Floor Slip Testers Severn Model Tortus II Floor Slip Tester SEV,TORTUSII (5505) AU Floor friction tester. Measures and records the dynamic coefficient of friction. Applications in assessing floor safety, evaluating cleaning methods and maintenance procedures, accident investigation, etc. Meets the draft requirements of international, Australian and New Zealand standards. Water Quality, pH Meters & Electrochem Hydrolab Minisonde 5 Multiprobe Water Logger HYD,MS5 (6020) AU Miniosonde 5 multiprobe water/borehole logger, including ‘Surveyor’ data collection system with GPS. Includes sensors for Dissolved Oxygen (HACH LDO), Conductivity, pH, Redox (ORP), Turbidity (Self-Cleaning), Temperature, Depth (0 to 25m) and GPS position. Includes the surveyor data aquisition system so no laptop is needed for download or data collection. Includes a 25m cable. ISCO 6700 Series Water Sampler ISCO,6712 (6057) AU Advanced water sampler for fully programmed collection. Samples are collected in up to 24 disposable plastic containers based on time, flow, and/or parameter set points. Fitted with NEMA 4X,6 (IP67) sealed controller featuring an exclusive, built-in pump. OTT KL010-150 Ground-water Depth Measurement Contact Gauge 150m OTT,KL010-150 (6065) AU Contact gauge for portable depth to water measurement. Used for wells, observation pipes, bore holes and control pumping tests. 150m depth of tape. as soon as the probe touches the water surface an acoustic signal beeps and the lamp on the instrument lights up. The depth is read from the measuring tape in meters. Water Quality, pH Meters & Electrochem cont’d. TPS 90FL-T Water Quality Meter TPS,90FL-T (6028) AU Field meter and logger for water quality measurements. Configured with independent probes for pH, conductivity/ salinity[TDS] temperature, dissolved oxygen[DO] and turbidity. Cables 5m with probe holder and safety harness. LCD display readout with simultaneous display of all measurements. Manual, “notepad” storage or automated data logging for up to 1,808 sets of readings by time and date. RS232C interface, with WinTPS software included. Supplied with rechargeable battery, and clip-lead for operation from a 12V source such as a car-battery. TPS WP-80 pH and Temperature Meter TPS,WP-80 (6003) AU Portable hand-held meter for pH, mV and temperature. Supplied with combination pH electrode and separate temperature sensor on 1m cables. Operating ranges 0 to 14pH and -10 to 120ºC (automatic sensor recognition with auto pH correction 0 to 100ºC). Case water resistant to IP67, connectors to IP65. Menu driven, with alphanumeric display. Auto storage of time and date of last calibration for GLP. Memory for 2400 readings of data, time and date, for Notepad results collection, or for AutoLog with logging intervals between 1s and 90h. Fitted with RS232C interface and supplied with download- software, charger and solutions. Rechargeable NiMH battery gives up to 50h operation. TPS WP-80 pH and Temperature Meter for Testing Meat TPS,WP-80M (6002) AU Portable hand-held meter for pH, mV and temperature. The instrument is capable of applying Bendalls equation to the pH reading for Meat Standards Australia grading requirements. Supplied with combination pH electrode and separate temperature sensor on 1m cables. Operating ranges 0~14pH and -10~120ºC [automatic sensor recognition with auto pH correction 0~100ºC]. Case water resistant to IP67, connectors to IP65. Menu driven, with alphanumeric display. Auto storage of time and date of last calibration for GLP. Memory for 2400 readings of data, time and date, for Notepad results collection, or for AutoLog with logging intervals between 1s and 90h. Fitted with RS232C interface and supplied with download-software, charger and solutions. Rechargeable NiMH battery gives up to 50h operation. TPS WP-82 Dissolved Oxygen Meter TPS,WP-82 (6009) AU Portable hand-held dissolved oxygen and temperature meter. Operating ranges 0 to 20ppm, 0 to 240% saturation, 0 to 45% gaseous and ppm with salinity correction. temperature range -10 to 120°C. Case water resistant to IP67, connectors to IP65, with 3m detachable cable and ED1 electrode. Menu driven, with alphanumeric display. Auto storage of time and date of last calibration for GLP. RS232C interface, and memory for 150 readings of data, time and date, for Notepad results collection, or for AutoLog results collection with logging intervals between 1min & 24h. Rechargeable NiMH battery gives up to 75h operation. Supplied with download-software, charger and solutions. Environmental, OHS, Chemical & Laboratorywww.techrentals.com.au Watch a YouTube playlist on water quality testing http://youtube.com/techrentals
  • 69. 68 Water Quality, pH Meters & Electrochem cont’d. TPS WP-84 Conductivity Salinity Temperature Meter TPS,WP-84 (6014) AU Portable hand-held meter for conductivity, TDS (Total Dissolved Solids) and temperature. Automatic range selection with 5 ranges. Case water resistant to IP67, connectors to IP65. Menu driven, with alphanumeric display for full-text prompting. Storage of time and date of last calibration for GLP. Memory for 150 readings of data, time and date, for Notepad results collection, or for AutoLog results collection with logging intervals between 1min & 24h. Rechargeable NiMH battery gives up to 75h operation. Supplied with sensor (k=1), charger and solutions. TPS WP-88 Turbidity & Temperature Meter with 8m Cable TPS,WP-88 (6031) AU Portable hand-held turbidity and temperature meter for field or laboratory use. Sensor probe diameter 45mm, with 8m cable. Turbidity ranging 0.1 to 200/2,000NTU ±1NTU with autoselection. Temperature compensation and sensor range 0 to 60ºC ±0.1ºC. Case water resistant to IP67, connectors to IP65, with detachable cable and sensor. Menu driven, with alphanumeric display. Auto storage of time, date and results of last calibration for GLP. RS232C interface, and memory for 150 readings of data, time and date, for Notepad results collection, or for AutoLog results collection with logging intervals between 1min and 24h. Rechargeable NiMH battery gives up to 50h operation. Supplied with download-software, charger and calibration solutions. Van Essen DI502 Mini-Diver Borehole Level Logger & Barometer 20m VAN,DI502 (6061) AU Mini-diver borehole level logger 20m, 1cm accuracy. Kit includes barometric logger for atmospheric pressure compensation. Will also log temperature. Temperature range -20 to 80ºC. Accuracy 0.1ºC. Size 22 x 90mm. Stores 24,000 measurements per parameter. Stainless steel housing barometric (l/c) logger for compensation. 10 year battery life. Light Meters, UVA/B/C Measurement Hioki 3423 Lux HiTester Digital Illuminance Meter HIO,3423 (5602) AU/MY Manual switching and autoranging. LCD display with 3½ digits (“1999”) for five measuring ranges to 20/200/2,000lx in 1-count steps, 20,000lx in 10-count steps and 200,000lx in 100-count steps with accuracy ±4%. Response time in autorange mode 5s (2s in manual range mode). Autozero, hold and backlight function with delay for taking readings in low light. Input for AC power adaptor, connecting- cable to allow separation of sensor unit and meter, and 200mVDC analogue output with cable. Battery powered. Light Meters, UVA/B/C Measurement cont’d. ILI 1400ABC Radiometer for UV Measurements ILI,1400ABC (5614) AU International Light model 1400 radiometer with backlit LCD display, autozero and autoranging. Continuous reading with hold function, or integrated “dose” measurement up to 24h. Smart detectorswithstorageofunitsanddetector-calibrationdata.Analoguerecorder output. Mains adaptor or battery power. Supplied with three sensors: UV actinic hazard (UVC with B & A components matched to OSHA requirements), range 2.50e-7 to 2.50e-3 W/cm2 eff. UVB + A (total “solar” radiation), range 1.16e-7 to 4.07e-1 W/cm2 . UVB, range 1.54e-6 to 1.54e-2 W/cm2 . Minolta CL-200 Chroma Meter for Illuminance & Colour Measurement MIN,CL-200 (5610) AU Konica Minolta model CL-200 portable colour meter. LCD display for illuminance, tristimulus values, chromaticity, correlated colour temperature and colour difference. Illuminance range 0.1 to 99,990lx ±2%. Colour accuracy ±0.002 [xy] or ±20°K [Tcp]. Fitted with RS232C interface. Battery powered, or AC adaptor. Topcon BM-9 Luminance Meter TOP,BM-9-2 (5611) AU Portable luminance meter with digital display. Field-of-view 5°, measurement acceptance angle 2°, with 10mm min spot diameter. Measuring distance 0.35m to infinity. Silicon photodiode sensor with automatic or manual range selection. Measurement range 0.01 to 199,900cd/m2 ±4% of reading. Built-in RS232C interface and analogue output. Battery powered. Topcon IM-2D Lux Meter NATA Certification TOP,IM-2D-NATA (5606) AU Digital illuminance meter with NATA certification. Measuring range from 0.1 to 19,999lx. Accuracy 5%, ±1 digit. Autoranging with silicon sensor. Battery operated. Yokogawa 51001 Lux Meter NATA Calibrated YEW,51001-NATA (5607) AU Digital illuminance meter with NATA certification. Measuring range from 0 to 99.9/999/9,990/99,900/999,000lx . Accuracy <3,000lx 4% ±1 digit >3,000lx 6% ±1 digit. Autoranging with silicon sensor. Battery operated. Weather Stations Vaisala WXT520 Weather Station VAI,WXT520-KIT (5885) AU Completely solid state measurement of rainfall to 0.1mm, rain intensity0.1mm/hr, rainfall duration, hail duration and intensity, barometric pressure 600 to 1100hPa, relative humidity 0 to 100%, wind speed o to 60m/s, wind direction and temperature -52 to 60°C. The instrument is logged using a Datataker DT80M and at the a press of a button the data can be downloaded to a memory stick. Daily summary reports are email once per day. The system includes a stand and will run continuously, it includes a solar panel to keep the battery charged. Environmental, OHS, Chemical & Laboratory www.techrentals.com.au
  • 70. 69 Environmental Flow Meters See also Flow Meters for Liquids & Gases on page 49-50 Global FP101 Digital Water Velocity Meter GLO,FP111 (6147) AU Portable flow probe - current meter for water velocity measurements in streams, channels and partially filled pipes. Propeller sensor in 50mmØ housing, fitted to telescopic handle [1.8m] with gauging marks to 900mm depth. Digital LCD flow meter display for instantaneous liquid velocity and average, maximum, stopwatch or clock. Minimum depth about 50mm. Range 0.1 to 4.5m/s ±0.05. Hydrological Services Universal Current Meter OSS-B1 HYS,OSSB1 (6145) AU Water current meter for measurement of flow velocity in rivers, streams, channels and open water. Robust streamlined stainless body fitted with high precision 100mmØ fan [flow range 0.025 to 5m/s]. Set of stainless wading rods for depths to 3m. Rechargeable “Hydromate” ruggedised field computer with IP65 case. Storage of fan calibration formulae for direct readout of volume-flow. Touch screen entry for set up, input, storage and download. Supplied with PC download software and cable. Unidata 6526B-21LCD Open Channel Liquid Flow Logger with LCD Module UNI,6526B-21LCD (6141) AU Open channel flow logger with field LCD display module and 10m cable (2m depth rating). Measurement and logging of flow-velocity (by Doppler), depth (by pressure) and temperature. Programmable for flow-channel profile (laptop PC required for in-situ programming via RS232C). Operating temperature range 0 to 60°C. Velocity 21 to 5,000mm/s ±2%; depth 0 to 2,000mm ±2%; temperature: -17 to 60°C ±0.1°C; log-interval 5s to 1 week; memory 120,000 samples. Programmable output to control devices such as water samplers. Detects and measures reverse flows. Charger and batteries supplied. Workhead dimensions 290 x 70 x 25mm. Balances & Scales below 8kg See also Weighing & Counting Scales over 8kg on page 55 A&D HF-300G Mercury 300g Counting Scales AND,HF-300G (4439) AU Scales 310g, resolution 0.001, repeatability 0.001. Includes RS232 port. Includes counting software. Can be used as counting scales. A&D Mercury MX50 Moisture Balance AND,MX50 (4440) AU Maximum sample weight capacity 51g, weight resolution 0.001g, moisture con- tent accuracy over 1g 0.10%, over 5g 0.02%. Halogen lamp used for heating, 400watt max. Drying temperature 50 to 200ºC. Measurement programs 20 sets, measurement mode moisture content, wet or dry, dry content, ratio, weight. Heating mode standard, automatic, quick, timer, manual. Display large VFD, interface RS-232C, CD-ROM S/W supplied. Pan sample size diameter 85mm. Chemical & Analytical - General Hydramotion Viscolite 700 Portable Viscometer HYL,V700S-21 (6352) AU Advanced portable viscometer with stainless-steel probe. Operating range 0.1 to 10,000mPaps (cps) with integral temperature correction -40 to 150ºC. Probe tip 21mmØ, immersion length 115mm (viscosity only) or 145mm (viscosity/temperature). Acetal polymer probe base for handheld or clamped operation, with coiled-cable connection to meter unit with 5 digit display. Battery powered. Laboratory Instruments, Spectroscopy X-Rite SP60 Portable Sphere Colour Spectrophotometer XRI,SP60 (6342) AU Portable spectrophotometer for surface colour measurements. Diffuse 8° [d/8] optical geometry with fixed 8mm aperture. Tungsten source for illuminant types C, D50, D65, D75, A, F2, F7, F11 & F12. Standard observers 2 & 10°. Blue-enhanced photodiode detectors with spectral range 400 to 700nm. Measures opacity and colour by chromatic, apparent or tristimulus calculation, with simultaneous included and excluded specular component, and spectrum at 10nm intervals. Storage of up to 2,000 samples with results download to serial printer or computer. Operation from internal rechargeable battery or AC adaptor. Environmental, OHS, Chemical & Laboratorywww.techrentals.com.au SOCIAL MEDIA TechRentals is giving you greater access to news, product tips and information via a range of social media channels. With over 100 videos on our YouTube channel and regular industry related updates on twitter you will always be informed. So subscribe and follow to stay up-to-date and in-touch with our friendly team and make the most of your test and measurement equipment. http://www.linkedin.com/company/techrentals http://www.twitter.com/techrentals http://www.youtube.com/techrentals New items are being added to the inventory constantly, so if you do not see what you are looking for please call 1800 632 652.
  • 71. 70 Security Equipment Detec DH50 Hand-held Metal Detector Kit of 4 DET,DH-50-KIT4 (9208) AU Kit of 4 x hand held security metal detector. Simple to operate - no adjustment needed. Audible alarm. Detec Garrett CS5000 Walk Through Metal Detector GAR,CS5000 (9211) AU Detects all metals. Requires assembly on-site & set-up. Adjustable sensitivity. Prospecting Metal Detectors See also Underground Services Location on page 61 Excaliber 1000 Underwater Metal Detector EXA,1000 (9204) AU Underwater metal detector with 10 inch search coil. Can be used effectively in or out of the water and is capable of going down to 60 meters depth. Features two operating modes; all metal and discriminate. In discriminate mode it will ignore most ferrous objects and still detect the valuable non-ferrous objects such as gold and silver. Rechargeable battery pack separated from the electronics cylinder allows easy access for recharging. www.techrentals.com.auOther Products NOTES
  • 72. 71 TECHRENTALS - Your Rental Business Partner TR0282 Cable Tester for Cat 6 and 7 techrentalsyour rental business partner RENT FOR A DAY, A MONTH, A YEAR OR MORE Fibre optic cable slicer and cleaver OTDR: Optical Time Domain Reflectometer Supplier of rental test and measurement equipment. TechRentals can tailor a package for you to get the right gear to suit your needs. Please call one of our Technical Sales people today on 1800 632 652 PON Meter Datacom TesterLight Source and Power meter Micro-Ohm Meter Pressure CalibratorPower Quality Analyser
  • 73. 72 OUR BUSINESS UNITS www.techrentals.com.au TechRentals hires specialised test equipment product solutions for a wide range of industries for periods from a day to a year or more. Products offered include power measurement and analysis, general electronic, environmental and OH&S, plus telecommunications. The leader in the industrial rental arena for more than 30 years, TechRentals also offers flexible purchasing options on selected product ranges. www.techrentals.com.au www.techrentals.com.my 1800 632 652 1800 88 7368 TR Vidcom is raising standards in the dynamic computer and audio-visual industry, offering solutions for both short & long term equipment procurement and event management. TR Vidcom has superior product and industry knowledge, with a nation-wide service over nine locations across Australia. We can provide all your computer and audio-visual requirements, with national support and timely delivery of your equipment. Our customers include major corporate companies around Australia and event managers around the nation. We can deliver, install and fully train your staff on your premises. www.trvidcom.com.au www.videowallsaustralia.com.au www.rent-notebook.com.au 1800 843 266 Be able to talk wherever you are by utilising the most reliable satellite communication network available. With coverage around Australia, New Zealand and surrounding island regions, you are able to stay connected with world class satellite voice, data and tracking solutions. TR Telecom can provide a tailored solution, supported by superior levels of customer service. Visit our new website, where you can rent and purchase a range of Satellite Communication equipment including Satellite Phones, BGAN Terminals, Data Accessories, Chargers, Batteries and Antennas. www.trtelecom.com 1300 550 014 Utilising state-of-the-art technology, our experienced team delivers calibration and repair services to customers in defence, manufacturing, aviation and other high tech sectors. TR VMS calibration group has NATA accredited facilities, plus mobile calibration labs operating as needed to meet customers’ on-site demands. www.trvms.com.au 1300 790 480 TR Hirecom is the largest two-way radio communications rental company in Australia and a division of TR Pty Ltd. Whatever your business needs, TR Hirecom have the resources to develop a customised solution that is competitively priced and of the highest standard, using state-of-the-art two-way radio communications technology from the world’s leading manufacturers. www.trhirecom.com.au 1800 222 327 Test & Measurement Audiovisual & Business Equipment Satellite CommunicationsYOU CAN HAVE THE BACKING OF OUR STRONG TECHNICAL CAPABILITIES AND ENJOY SUPPORT FROM SEVERAL SYNERGISTIC BUSINESS UNITS. Calibration Radio Communications
  • 74. 73 TECHRENTALS BUSINESS PARTNERSwww.techrentals.com.au Acoustic Research Laboratories Agilent Anritsu EXFO Fluke Fluke Networks Gridsense JDSU Megger SebaKMT Testo TECHRENTALS ARE DISTRIBUTORS AND RESELLERS FOR: TECHRENTALS - THE PERFECT SOLUTION! Anritsu JDSU Megger Gridsense Acoustic Research Laboratories SebaKMT Kingfisher Flir TechRentals has a vast fleet of products offering solutions for many markets including Aviation, HVAC, Defence, Electrical, Biomedical, Mechanical and Telco markets, however if you cannot find what you are looking we have access to our international partners giving you an even larger and diverse inventory to satisfy your needs. Remember that it is much more cost effective to Rent than to purchase outright as you are able to preserve capital for other parts of your business. However if you do need to eventually own the assets then Tech Rentals will offer a Rent with Purchase Option. Either way we will find you the assets you need when you want them.
  • 75. TR0995 Australia 1800 632 652 www.techrentals.com.au Malaysia 603 5632 1135 www.techrentals.com.my TechRentals New Zealand* 0800 832 473 www.techrentals.co.nz *distributor of TechRentals Australia

×