VIDEO&PICTURE                                           You have to wear apron before start to                            ...
Tenon Saw - The commonest type of back saw. The tenon saw is                                  a mid-sized saw that gets it...
MAKING COSMETIC ORGANIZER 1(11/01/17/Mon)                              Marking and Measuring PROCESS JOURNALEMOTIONI was v...
MAKING COSMETIC ORGANIZER 2(11/01/18/Tue)                                 Planing and Cutting PROCESS JOURNALEMOTIONToday ...
MAKING COSMETIC ORGANIZER 3(11/01/21/Fri)                             Measuring and Cutting PROCESS JOURNALEMOTIONToday wa...
MAKING COSMETIC ORGANIZER 4(11/01/24/Mon)                              Making the bottom FIT PROCESS JOURNALEMOTIONToday, ...
MAKING COSMETIC ORGANIZER 5(11/01/25/Tue)                                   Making two Eyes PROCESS JOURNALEMOTIONToday wa...
MAKING COSMETIC ORGANIZER 6(11/01/28/Fri)                             Filling wrong joints with the wood PROCESS JOURNALEM...
MAKING COSMETIC ORGANIZER 7(11/02/08/Tue)                        Filling the holes and checking PROCESS JOURNALEMOTIONToda...
MAKING COSMETIC ORGANIZER 8(11/02/11/Fri)                     Making divider and Painting sides PROCESS JOURNALEMOTIONToda...
MAKING COSMETIC ORGANIZER 9(11/02/14/Mon)                                  Painting the sides PROCESS JOURNALEMOTIONToday ...
MAKING COSMETIC ORGANIZER 10(11/02/15/Tue)                              Painting all the parts PROCESS JOURNALEMOTIONToday...
MAKING COSMETIC ORGANIZER 11(11/02/18/Fri)                              How to make a Drawer? PROCESS JOURNALWHAT I DIDI p...
MAKING COSMETIC ORGANIZER 12(11/02/21/Mon)                                     Glueing the parts  PROCESS JOURNAL EMOTION ...
MAKING COSMETIC ORGANIZER 13(11/02/22/Tue)                  Start making a drawer and Screwing PROCESS JOURNAL EMOTION Tod...
MAKING COSMETIC ORGANIZER 14(11/02/28/Mon)     Finish making Cosmetic Organizer without a Drawer PROCESS JOURNAL EMOTION T...
MAKING COSMETIC ORGANIZER 15(11/03/01/Tue)                                         Making the Drawer PROCESS JOURNALEMOTIO...
MAKING COSMETIC ORGANIZER 16(11/03/07/Mon)                Fixing the problem and making the back  PROCESS JOURNAL EMOTION ...
MAKING COSMETIC ORGANIZER 17(11/03/08/Tue)             Making two backs(Sanding and Cutting) PROCESS JOURNALEMOTIONToday w...
MAKING COSMETIC ORGANIZER 18(11/03/11/Fri)                                 Drilling and Screwing PROCESS JOURNALEMOTIONTod...
MAKING COSMETIC ORGANIZER 19(11/03/14/Mon)                                Drilling and Screwing PROCESS JOURNAL EMOTION To...
MAKING COSMETIC ORGANIZER 20(11/03/15/Tue)                                Drilling and Screwing PROCESS JOURNAL EMOTION To...
MAKING COSMETIC ORGANIZER 21(11/03/18/Fri)                             Chiselling and GlueingPROCESS JOURNALEMOTIONToday I...
MAKING COSMETIC ORGANIZER 22(11/03/21/Mon)                               Chiselling and Planing PROCESS JOURNAL EMOTION To...
MAKING COSMETIC ORGANIZER 23(11/03/22/Tue)                                 Gluing and Clamping PROCESS JOURNAL EMOTION I w...
MAKING COSMETIC ORGANIZER 24(11/03/25/Fri)                               Drilling and ScrewingPROCESS JOURNALEMOTIONI was ...
MAKING COSMETIC ORGANIZER 25(11/03/28/Mon)                                       Start Painting PROCESS JOURNAL EMOTION I ...
MAKING COSMETIC ORGANIZER 26(11/03/29/Tue)                                      Finish Painting PROCESS JOURNAL EMOTION I ...
MAKING COSMETIC ORGANIZER 27(11/04/01/Fri)                              Handle of the drawerPROCESS JOURNALEMOTIONToday, I...
MAKING COSMETIC ORGANIZER 27(11/04/12/Tue)                                   Filing and Sanding PROCESS JOURNAL EMOTION To...
MAKING COSMETIC ORGANIZER 28(11/04/15/Fri)                          Digging out and ClampingPROCESS JOURNALEMOTIONToday wa...
Upcoming SlideShare
Loading in...5
×

Process journal(dt)

657

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
657
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
11
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "Process journal(dt)"

  1. 1. VIDEO&PICTURE You have to wear apron before start to make something. If you don’t, your clothes will be dirty. Drill - It is a hand tool, power tool, or machine with a rotating cutting tip or reciprocating hammer or chisel, used for making holes.Safety Goggles - Safety goggles are used toprotect the eyes of the wearer during activitieswhere eye injury is a risk. Tri - Square - It is used for marking right angles on a work-piece or checking the "squareness" of something, i.e. that an angle is a right angle.
  2. 2. Tenon Saw - The commonest type of back saw. The tenon saw is a mid-sized saw that gets its name from its use in cutting tenons for mortise and tenon joinery. Like all back saws it has a stiffening cap over the top edge of the blade, which prevents flexing of the blade and provides good control when cutting. Using Tenon Saw(Video) Using Pull Saw(Video) Using disc sander(Video) Smoothing Plane - A smoothing plane or smooth plane is a type of bench plane used in woodworking. The smoothing plane is typically the last plane used on a wood surface - when used properly, the finish it gives will be far superior to that made by sandpaper or scrapers.Using Smoothing Plane(Video) Coping Saw - A coping saw is a type of hand jaw used to cut intricate external shapes and interior cutouts in woodworking or carpentry. It is widely used to cut moldings to create coped rather than miter joints. It is occasionally used to create fretwork though it is not able to match a fretsaw in intricacy of cut, particularly in thin materials. Coping saw blades are always thicker and much coarser cutting than typical fretsaw blades. Using coping saw(Video)
  3. 3. MAKING COSMETIC ORGANIZER 1(11/01/17/Mon) Marking and Measuring PROCESS JOURNALEMOTIONI was very happy because I started making the cosmetic organizer. Iam really expecting that I make great cosmetic organizer. However,measuring the sides were very difficult. I felt tired.WHAT I DID & WHY This is the bottom of the productFrom the beginning of the class, I marked and measured a bottomand 2 sides on the wood. Their sizes are 180 x 180 x 10 and 2 for180 x 170 x 10. In fact, writing a size of the side is very hard becausethe shape of the side is stairs. It is hard to describe the size.WHAT TOOLS DID I USEI used ruler, pencil, eraser and tri-square. Ruler for measuring thelength, and tri-square for drawing a straight line. I also used tri-square Using Ruler for Measuringfor drawing the straight line all around the wood like the last picture incase I cut the wood on the wrong way. Some students cut the wood outof the line.LEARNER PROFILEI think I am a carer because I tried not to waste the wood. I used thecorner of the wood for marking the bottom. The shape of the bottom is Like this ↑↑↑a square. It fits right on the corner of the wood.PLANMy plan is to cut the bottom and sides. After I cut them, I will start to measure and mark thefront and back part of the product.AREAS OF INTERACTION(AOI)I think it is Human Ingenuity. I can give this product to people who need a cosmetic organizer. Ithink that teenagers will like this cosmetic organizer because it is playful and decorative. Forme, I will give cosmetic organizer to my younger sister. She really needs cosmetic organizerbecause her cosmetics such as nail polishes and lipsticks are lying on the floor. I will give her theproduct for the environment of the room.
  4. 4. MAKING COSMETIC ORGANIZER 2(11/01/18/Tue) Planing and Cutting PROCESS JOURNALEMOTIONToday was very fun because it was my first time to use the plane.Sometimes, I felt tired due to the smoothing plane. Using it was little bitdifficult for me. However, after I finished planing, I satisfied at theparts.WHAT I DID & WHY Using Pull Saw to Cut the BottomI continued to cut the bottom and sides because I haven’t finishedcutting yet. I used tenon saw and pull saw. Tenon saw is the saw forcutting the wood, however, the top of the tenon saw is covered byBrass back. Brass back is for cutting the wood straightly. If I couldn’tsaw anymore, I had to cut the wood to use pull saw. That is becausepull saw doesn’t have brass back. It is also efficient because it can cutthe wood faster and easier. Then I planed the bottom and sides forshaving the useless part of the wood which was the space between cutline and pencil line. For fitting the parts exactly, I had to plane the Using Smoothing Planeedges of the wood. As you see the picture next to the text, planing to reduce the base towas little bit hard. It is weighty and its blade is not so sharp. the exact sizeLEARNER PROFILEI think I am a risk taker because I researched about the safety rulesabout using smoothing plane. I also asked Mr. Anderson about how touse the smoothing plane.PLAN The Sides of the ProductMy plan is to measure and mark the front and back part of theproduct. Their sizes are 180 x 170 x 10 and 180 x 70 x 10. After Ifinish measuring and marking on the wood, I will start to cut them.CHANGES TO YOUR PLANI wrote ‘After I cut them, I will start to measure and marke the front and back part of theproduct.’ at the first process journal. However, I needed to plane the wood.AREAS OF INTERACTION(AOI)I think it is Environment. I can save the materials such as paint, wood, sand paper, glue andscrew during creating the product. If only I do not waste the wood, people have to cut the woodlittle bit. If all the students save the wood and try not to waste the wood, lots of trees will becut. The more I save the materials, the more I save the environment.
  5. 5. MAKING COSMETIC ORGANIZER 3(11/01/21/Fri) Measuring and Cutting PROCESS JOURNALEMOTIONToday was busy because I wanted to finish all the parts of the cosmeticorganizer.WHAT I DID & WHYI finished all the parts of the cosmetic organizer(2 sides, 1 front, All the parts of cosmeticbottom, back, 2 dividers). Firstly, I measured and marked on the wood organizerto make front, back and dividers. I used ruler, pencil, eraser and tri-square. Ruler for measuring the length, and tri-square for drawing astraight line. I also used tri-square for drawing the straight line allaround the wood. Secondly, I cut the wood to use tenon saw and pullsaw. The reason I used tenon saw and pull saw is in the second processjournal. Thirdly, I did very quick sanding, filing and planing. That isbecause files, sand paper and plane make the wood smoother. Sharpedges will hurt children by cutting their fingers.LEARNER PROFILE Sanding the wood toI think I am a carer because I tried not to waste the wood. I used the make it smoothercorner of the wood for marking the bottom. The shape of the bottom isa square. It fits right on the corner of the wood.PLANMy plan is to check if all the parts are smooth enough measured andmarked correctly.CHANGES TO YOUR PLAN Using Pull SawI wrote ‘My plan is to measure and mark the front and back part of theproduct.’. However, I changed my plan. I finished all the parts of thecosmetic organizer.AREAS OF INTERACTION(AOI)I think it is Approaches to Learning. In this unit, I learnt lots of things. For example, I learnt anumber of tools that I havent used and I knew how to cut the wood and paint the productclearly and straightly. If I want to learn more, I can ask Mr. Anderson and other students for thetools that they are using. In addition, I can share what I am using to other students.
  6. 6. MAKING COSMETIC ORGANIZER 4(11/01/24/Mon) Making the bottom FIT PROCESS JOURNALEMOTIONToday, I was little disappointed at my work because I thought thatI measured and cut all the parts of the product correctly. Therewas an error of the size of the bottom.WHAT I DID & WHYI had time for checking the parts of the cosmetic organizer. Then Ifound an error which is the size of the bottom. There was no gapto put the sides. Therefore, I measured the length of the thicknessof the sides and cut the parts. I used tri-square, ruler, gent sawand chisel. Ruler for measuring the length, and tri-square for Using gent saw to cut out thedrawing a straight line. I also used tri-square for drawing the useless parts of the woodstraight line all around the wood. Gent saw for cutting the sides ofthe wood. The thickness of the blade of the gent saw is very thin,so I had to use gent saw for cutting very small size of the wood.Lastly, I used chisel. It was my mistake. I didn’t have to use chisel tocut the sides. It was just the waste of time.LEARNER PROFILEI think I am a risk taker because I researched how to cut clearlywithout any broken parts or little thorns form the wood. Therefore,I cut the wood slowly and clearly. I got very nice edge of thebottom. Using chisel to cut out the sides clearlyPLANMy plan is to make 2 eyes(30x30x10) of the product. For drawing the eyes, I will use a jig.CHANGES TO YOUR PLANI wrote ‘ My plan is to check if all the parts are smooth enough measured and markedcorrectly.’. I didn’t change my plan. I checked whether all the parts fit correctly or not and fixedthe errors.AREAS OF INTERACTION(AOI)I think it is Health and Social Education. I always wore safety goggles when I am working withmachines because sometimes, the wood will crack and some pieces might be thrown in the airand hit my eyes. My product also considers the safety of the society as well. I tried my best tomake the woods surfaces, corners and edges as smooth as possible so that the users do not gethurt by the sharp edges.
  7. 7. MAKING COSMETIC ORGANIZER 5(11/01/25/Tue) Making two Eyes PROCESS JOURNALEMOTIONToday was very interesting because I used disc sander. I really like touse disc sander.WHAT I DID & WHYI made the joints for the dividers. Actually, I didn’t make the joints bymyself. Mr. Anderson made them for me because the machine formaking the hole is dangerous and big. However, Mr. Anderson madewrong holes. As you see the third picture, there are 4 lines for the Using disc sander to makedividers. But I need only 2. the eye perfect circleI also made 2 eyes of cosmetic organizer. Making them was very easyto me even though there wasn’t enough size of jig for drawing anaccurate circle. I used the object which has the round bottom andpencil because I can’t draw accurate circle without an actual circle ora jig.LEARNER PROFILEI think I am a carer because I tried not to waste the wood. I drew twoeyes at the corner of the wood because I didn’t want to wate the 2 eyes of cosmetic organizerwood. Also, I didn’t make the sides again even though there is amistake.PLANMy plan is to make the joints for all the parts. I think that making thejoints would be really hard because my project is almost made ofplywood(which is very thin).CHANGES TO YOUR PLAN 2 right, 2 wrong gaps forI wrote ‘My plan is to make 2 eyes(30x30x10) of the product. For the dividersdrawing the eyes, I will use a jig.’. I made 2 eyes of the product,however, I didn’t use jig. Also, I made the joints for the dividers. Ididn’t mention about it at the last process journal.AREAS OF INTERACTION(AOI)I think it is Community and Service. My products function is to be able to arrange the cosmeticsand some other small objects put in one spot. This function will help the community by makingtheir environments cleaner and more organized. Also, in the process of creating, I did not onlyconcentrate on my work. Some of my friends came and helped me. Then, it is a part of service.
  8. 8. MAKING COSMETIC ORGANIZER 6(11/01/28/Fri) Filling wrong joints with the wood PROCESS JOURNALEMOTIONToday, I felt happy because I cut and glued the wood. I reallylike cutting and glueing, especially glueing.WHAT I DID & WHYI cut the thin wood stick which is shown at the second picture tofill the wrong joints for the dividers. I used gent saw because itcan cut the wood clearly. Also, the thickness of blade of the gentsaw is very thin, so I was able to cut the wood without any spine I used gent saw for cuttingfrom the wood stick. thin wood stickAfter I cut the wood, I started to glue the parts from the woodsticks into the wrong joints. I used PVA glue and wet tower. PVAglue isn’t dangerous for children, and it can be removed withonly the wet tower.LEARNER PROFILEI think I am a carer because I didn’t waste the wood. I used thewood stick in the box which is the collection of the useless wood.PLAN Thin wood stick for fillingMy plan is to make the joints for front, bottom and eyes. I think the holesthat making the joints would be really hard because my projectis almost made of plywood(which is very thin). If I have time, Iwould start glueing.CHANGES TO YOUR PLANI wrote ‘ My plan is to make the joints for all the parts. ’.However, I haven’t started to make the joints for the bottom,eyes and even front yet.AREAS OF INTERACTION(AOI) After finish cutting and glueingI think it is Human Ingenuity. I can give this product to people whoneed a cosmetic organizer. I think that teenagers will like thiscosmetic organizer because it is playful and decorative. For me, I will give cosmetic organizer tomy younger sister. She really needs cosmetic organizer because her cosmetics such as nailpolishes and lipsticks are lying on the floor. I will give her the product for the environment of theroom.
  9. 9. MAKING COSMETIC ORGANIZER 7(11/02/08/Tue) Filling the holes and checking PROCESS JOURNALEMOTIONToday was boring because I had to do the process just like thelast again, which is filling the wrong holes with a thin wood stick.WHAT I DID & WHYI cut the thin wood stick to fill the wrong joints for the dividers. Iused gent saw because it can cut the wood clearly. Also, thethickness of blade of the gent saw is very thin, so I was able to cut Filling the holes with thethe wood without any spine from the wood stick. wood and ----After I cut the wood, I started to glue the parts from the woodsticks into the wrong joints. I used PVA glue and wet tower. PVAglue isn’t dangerous for children, and it can be removed withonly the wet tower.Finally, I filled a little holes with ----. I used ----- because it cancover the small holes. Also, after an hour, it changes just like thewood. However, the color of it is very bad, so I have to paint onthat.LEARNER PROFILEI think I am a carer because I didn’t waste the wood and -------. Iused the wood stick in the box which is the collection of the useless Cutting the wood forwood. Also, I used ----- very little bit. making a proper wood stickPLANMy plan is to glue all the parts for painting. If I have time, I would start painting.CHANGES TO YOUR PLANI wrote ‘My plan is to make the joints for front, bottom and eyes.’. However, I couldn’t make thejoints for those today. I didn’t have time for doing that. Also, I wrote ‘If I have time, I would startglueing.’, but I haven’t start glueing yet.AREAS OF INTERACTION(AOI)I think it is Environment. I can save the materials such as paint, wood, sand paper, glue andscrew during creating the product. If only I do not waste the wood, people have to cut the woodlittle bit. If all the students save the wood and try not to waste the wood, lots of trees will becut. The more I save the materials, the more I save the environment.
  10. 10. MAKING COSMETIC ORGANIZER 8(11/02/11/Fri) Making divider and Painting sides PROCESS JOURNALEMOTIONToday was fun because I painted the sides, however, at the beginningof the class, I made the divider again. Because the original onedoesn’t fit to the joints on the sides. So I was little bit dissatisfied tome.WHAT I DID & WHYFirst, I made the divider again because the previous divider didn’t fit Cutting the wood forinto the joints which are on the sides. It should be fitted exactly. I used making a thin wood stickgent saw and bench hook for making a new divider. The gent saw cancut the wood clearly. Also, the thickness of the blade is very thin.Bench hook can hold the wood strongly.Next, I painted the sides before I glue them because I won’t paintclearly and easily after I glue all the parts. I used tape, paint brush,unfolded box and water bottle for painting. Tape is very useful. If Iwant to paint the rectangular with very clear line, I would tape aroundthe shape and paint on the tape and the shape wich forms in therounded tapes. Unfolded box is for protecting that the desk is painted Painting the front side ofby the paint. the side to use tapeLEARNER PROFILEI think I am a carer because I didn’t waste the wood and paint. Ididn’t waste wood when I was making a new divider. I didn’t wastethe paint when I was painting the sides. I dig only small amount ofpaint.PLANMy plan is to paint the bottom, dividers, back and the front as After painting the backmentioned in the gantt chart. It would take about 2 classes. It would side of the sidebe very fun because I like painting.CHANGES TO YOUR PLANI wrote ‘ My plan is to glue all the parts for painting. If I have time, I would start painting.’. Icouldn’t start glueing because Mr.Anderson said that I have to paint the inside of the productbefore I glue all of them because it will be very hard to paint inside the product after I gluedthe parts.AREAS OF INTERACTION(AOI)I think it is Approaches to Learning. In this unit, I learnt lots of things. For example, I learnt anumber of tools that I havent used and I knew how to cut the wood and paint the productclearly and straightly. If I want to learn more, I can ask Mr. Anderson and other students for thetools that they are using. In addition, I can share what I am using to other students.
  11. 11. MAKING COSMETIC ORGANIZER 9(11/02/14/Mon) Painting the sides PROCESS JOURNALEMOTIONToday was very fun because I painted my product for a wholeclass. I really like painting because I can decorate the wood whatI want.WHAT I DID & WHYI painted the sides before I glue them because I won’t paintclearly and easily after I glue all the parts. I used tape, paintbrush, unfolded box and water bottle for painting. Tape is very After painting the front sideuseful. If I want to paint the rectangular with very clear line, I of the sidewould tape around the shape and paint on the tape and the shapewich forms in the rounded tapes. Unfolded box is for protecting that the desk is painted by thepaint.The hardest thing was to draw the triangles on the backgroundwhich will be colored in orange. Even though I used tape to paintthe triangles perfectly, I painted on the black triangles withorange background color.LEARNER PROFILEI think I am a carer because I didn’t waste the wood and thepaint. I didn’t waste the paint when I was painting the sides. I digonly small amount of paint using useless wood stick. Unfolded useless box that I used for paintingPLANMy plan is to paint the paint sides, dividers and the bottom as I mentioned in the gantt chart. Ithink that painting all the parts would take more time that I expected in the gantt chart.CHANGES TO YOUR PLANI wrote ‘My plan is to paint the bottom, dividers, back and the front.’. However, I only paintedthe sides. I didn’t have enough time to paint all the parts.AREAS OF INTERACTION(AOI)I think it is Health and Social Education. I always wore safety goggles when I am working withmachines because sometimes, the wood will crack and some pieces might be thrown in the airand hit my eyes. My product also considers the safety of the society as well. I tried my best tomake the woods surfaces, corners and edges as smooth as possible so that the users do notget hurt by the sharp edges.
  12. 12. MAKING COSMETIC ORGANIZER 10(11/02/15/Tue) Painting all the parts PROCESS JOURNALEMOTIONToday was very busy because I wanted to paint all the parts of theproduct. I was happy at the end of the class because I did what I wanted to Frontdo.WHAT I DID & WHYI painted all parts of the product(front, back,divider 2, sides, eyes, bottom) apart from divider1. I used tape, unfolded box, paint brush, waterbottle, towel and paint. Unfolded box for Backpreventing that my cloth or the desk. paint brush for Showing how topainting, water bottle for washing the dirty paint paint clearly bybrush, and towel for absorbing the water in the using tapepaint brush. Picture 1The most important thing for today was tape. I used tape topaint very clearly and easily. I cut the tape to the shape of triangle that Iwant, then painted the background color which is orange. Next, I teared Divider 2off the tape like picture 1.LEARNER PROFILEI think I am a carer because I didn’t waste the wood and the paint. I didn’twaste the paint when I was painting the sides. I dig only small amount ofpaint using useless wood stick.PLAN SidesMy plan is to finish painting. I have to take out the tapes that I attachedon the wood. Also I have to paint over again for hiding the pencil line ornot painted parts.CHANGES TO YOUR PLANI wrote ‘My plan is to paint the paint sides, dividers and the bottom.’.However, I painted all the parts, not only sides, dividers and the bottom. EyesAREAS OF INTERACTION(AOI)I think it is Community and Service. My products function is to be able toarrange the cosmetics and some other small objects put in one spot. Thisfunction will help the community by making their environments cleaner andmore organized. Also, in the process of creating, I did not onlyconcentrate on my work. Some of my friends came and helped me. Then,it is a part of service. Bottom
  13. 13. MAKING COSMETIC ORGANIZER 11(11/02/18/Fri) How to make a Drawer? PROCESS JOURNALWHAT I DIDI painted the product just like yesterday. After I finish painting and glueing, I am going tomake a drawer. For making drawer, I had to research about how to make it. And I am goingto make very simple drawer which looks like the picture 1.RESEARCH 1. Design the box. Determine the number of drawers I want and the size that I want them to be. ->The number of drawers : 1, The size of drawer : 170 x 170 x 50 2. Cut the top and bottom of the box as well as the sides and back. ->Top&Bottom : 180 x 180 x 10, Sides&Back : 180 x 70 x 10 4. Measure the drawer on the wood. Make the drawers smaller to allow them to slide in or out. ->Bottom : 170 x 170 x 10, Sides&Back : 170 x 50 x 10 5. Cut wood for the drawers. Picture 16. Paint all the parts of the box and the drawer. Box Drawer Back Inside : x, Outside : Black Inside : Black, Outside : Black triangules with orage background color Sides Inside : x, Outside : Black 3 sides : Inside : Black, Outside : Black triangules with orage background 1 side(where the handle will be attached) : color Black triangules with orage background color Bottom Inside : x, Outside : x Inside : Black, Outside : Black7. Nail the sides of the box to the top and bottom pieces. Nail the back onto the box. Fillany holes with putty.8. Assemble the drawers by nailing the sides, back, front and bottom together.9. Sand and stain the box and the drawer.10. Attach a drawer handle to the drawer. Put the drawer into the box.11. FINISH!!!
  14. 14. MAKING COSMETIC ORGANIZER 12(11/02/21/Mon) Glueing the parts PROCESS JOURNAL EMOTION Today was very happy because I like glueing. Actually, I like the smell of PVA glue. I think that it is very addictive. WHAT I DID & WHY I painted the remain parts by using paint brush, unfolded box and paint. I didn’t use the water bottle for today because I didn’t need it. I spent only 5 minutes to paint. I glued the eyes on the back of the product. I used PVA glue, wet tower and G-clamp. PVA glue is non-toxic glue, even children can use the PVA glue. Also, it is very safe because we can clean the glue off by using wet tower. PVA glue is very easy to clean it off. For cleaning off the PVA glue, I used the wet tower. I used G- Glueing by using PVA glue clamp for fastening the eyes and the back. If I don’t use G-clamp, the eyes and the back wouldn’t be able to attached perfectly. LEARNER PROFILE I think I am a carer because I didn’t waste the wood, glue and the paint. I didn’t waste the paint when I was painting the sides. I dig only small amount of paint using useless wood stick. Also, I used very small amount of glue. PLAN My plan is to glue the sides, front, dividers and bottom of the Using G-clamp for fastening product. I think that I will finish this product after about 2 classes the eyes and the back as I mentioned in my Gantt chart. CHANGES TO YOUR PLAN I wrote ‘My plan is to finish painting’ for the last process journal. However, I even haven’t finished painting until today’s class. AREAS OF INTERACTION(AOI) I think it is Environment. I can save the materials such as paint, wood, sand paper, glue and screw during creating the product. If only I do not waste the wood, people have to cut the wood little bit. If all the students save the wood and try not to waste the wood, lots of trees will be cut. The more I save the materials, the more I save the environment.
  15. 15. MAKING COSMETIC ORGANIZER 13(11/02/22/Tue) Start making a drawer and Screwing PROCESS JOURNAL EMOTION Today was very hard because I had to drill the hole for putting the nails. Drilling hole was the hardest process ever I’ve done. WHAT I DID & WHY At the beginning of the class. I marked on the wood for making a Cutting the wood for a drawer. I used square ruler and a pencil. Square ruler makes the line drawer straight and makes the angle between the side of the wood and the line 90 degrees. Then I cut the wood. I used tenon saw because there was enough space to use tenon saw and tenon saw can cut fast. Tenon saw needs about 3mm because tenon saw could make the thorns very easily. After that, I marked for the holes. I used pencil for marking. Then, I drilled the holes by using cordless drill, G-clamp and a piece of old cloth. Cordless drill is very convenient. There is no cord. G-clamp makes the object can’t move if there is any forces to move the object. Marking on the side of A piece of old cloth is for protecting the face of the part for not the drawer scratching by the G-clamp. LEARNER PROFILE I think I am risk taker because I researched about how to make the drawer. PLAN My plan is to get the work which is screwing done. I didn’t mention in the Gantt Chart that I will screw the parts. I think I will take about 2 Marks for the holes more classes to get it done. CHANGES TO YOUR PLAN I wrote ‘My plan is to glue the sides, front, dividers and bottom of the product.’ in the last process journal. However, actually, I didn’t glue the parts. I screwed the parts. AREAS OF INTERACTION(AOI) I think it is Approaches to Learning. In this unit, I learnt lots of things. For example, I learnt a number of tools that I havent used and I knew Drilling the hole by using how to cut the wood and paint the product clearly and straightly. If I cordless drill want to learn more, I can ask Mr. Anderson and other students for the tools that they are using. In addition, I can share what I am using to other students.
  16. 16. MAKING COSMETIC ORGANIZER 14(11/02/28/Mon) Finish making Cosmetic Organizer without a Drawer PROCESS JOURNAL EMOTION Today was extremely happy because I finished screwing. Also, I am very satisfied with this cosmetic organizer. WHAT I DID & WHY I took off all the screws in order to make a counter sink. I didn’t make a counter sink when I was drilling the hole. A counter sink is the bigger hole that is drill in about 1mm deep because it is for the head of the screw. The head of the screw Drilling the hole by using has to be in the wood, otherwise it would be very difficult to cordless drill put the product into very tight space. After I made all the counter sinks. I used a screw driver for screw the screws. It was very hard to do, but if I didn’t make a hole for that, screwing would be the most difficult process. LEARNER PROFILE I think I am risk taker because I researched about how to make the drawer. I used both internet and the book. I used two types of resources for researching. The evidence is in the page 13. PLAN My plan is to start making a drawer. I didn’t mention is the Gantt Chart, however, I am going to make a drawer in order to make this more useful and helpful. I Final Product cut the wood for front part of the drawer already. All I have to do is to disc sand and cut other sides. CHANGES TO YOUR PLAN I wrote ‘My plan is to get the work which is screwing done.’. I get this work done. There is no change to my plan. AREAS OF INTERACTION(AOI) I think it is Health and Social Education. I always wore safety goggles when I am working with machines because sometimes, the wood will crack and some pieces might be thrown in the air and hit my eyes. My product also considers the safety of the society as well. I tried my best to make the woods surfaces, corners and edges as smooth as possible so that the users do not get hurt by the sharp edges.
  17. 17. MAKING COSMETIC ORGANIZER 15(11/03/01/Tue) Making the Drawer PROCESS JOURNALEMOTIONI was fun today because I did many things in 2 periods. I drilled,disc sanded and sawed the drawer.WHAT I DID & WHYAt the beginning of the class. I marked on the wood for making adrawer. I used square ruler and a pencil. Square ruler makes theline straight and makes the angle between the side of the woodand the line 90 degrees. Then I cut the wood. I used tenon saw Drilling the holes for screwbecause there was enough space to use tenon saw and tenon sawcan cut fast. Tenon saw needs about 3mm because tenon sawcould make the thorns very easily.After that, I marked for the holes. I used pencil for marking. Then,I drilled the holes by using cordless drill, G-clamp and a piece ofold cloth. Cordless drill is very convenient. There is no cord. G-clamp makes the object can’t move if there is any forces to movethe object. A piece of old cloth is for protecting the face of thepart for not scratching by the G-clamp.LEARNER PROFILE Disc Sanding the side of theI think I am risk taker because I researched about how to make the drawerdrawer. In addition, I asked Hee Jo how to drill the holes ondiagonal side(not straight).PLANMy plan is to finish drilling and screwing. I didn’t mention aboutthe drawer in Gantt Chart at all.CHANGES TO YOUR PLANI wrote ‘My plan is to start making a drawer.’ in the last processjournal. Therefore, I started to make a drawer. But I only wrote‘All I have to do is disc sanding and cutting other sides.’. I drilledthe holes too. I didn’t mention that in the last process journal. Cutting the bottom of the drawer by using tenon sawAREAS OF INTERACTION(AOI)I think it is Community and Service. My products function is to be able to arrange the cosmeticsand some other small objects put in one spot. This function will help the community by makingtheir environments cleaner and more organized. Also, in the process of creating, I did not onlyconcentrate on my work. Some of my friends came and helped me. Then, it is a part of service.
  18. 18. MAKING COSMETIC ORGANIZER 16(11/03/07/Mon) Fixing the problem and making the back PROCESS JOURNAL EMOTION Today was little bit tired and unsatisfied at the product. That’s because I found a problem at drilling stage. I had to drill the hole straightly, however, I drilled diagonally. So the wood was broken! WHAT I DID & WHY I found the problem which is broken wood(which is mentioned in the Filling the hole by using putty first picture). Therefore, I filled the hole with putty. Putty is very useful tool. I can fill any holes with putty and the putty become very hard(like wood). Then, no one would know that I put putty after paint stage. After I filled the hole, I marked the hole and drilled on it by using cordless drill. It very easy to use; It doesn’t have the cord to plug in. In addition, I can change the drill bit with a few touches. After drilling, I made the bottom smoother before screwing. That’s because sanded side is easier to paint and screw. I used smoothing plane. For me, I hate that tool because it is too heavy and hard to use. There is a small blade which makes me hard to do because it sometimes Making the side of the bottom smooth by using LEARNER PROFILE smoothing plane I think I am risk taker because I researched about how to make the drawer. In addition, I asked Hee Jo how to drill the holes on diagonal side(not straight). PLAN My plan is to make the front and the back. I didn’t mention in Gantt Chart, I even didn’t mention about the drawer at all. CHANGES TO YOUR PLAN I wrote that my plan is to drill and screw the wood. I drilled the hole, but I haven’t screwed yet. Side + Bottom AREAS OF INTERACTION(AOI) I think it is Human Ingenuity. I can give this product to people who need a cosmetic organizer. I think that teenagers will like this cosmetic organizer because it is playful and decorative. For me, I will give cosmetic organizer to my younger sister. She really needs cosmetic organizer because her cosmetics such as nail polishes and lipsticks are lying on the floor. I will give her the product for the environment of the room.
  19. 19. MAKING COSMETIC ORGANIZER 17(11/03/08/Tue) Making two backs(Sanding and Cutting) PROCESS JOURNALEMOTIONToday was little bit boring and dissatisfied with my projectbecause I felt that the drawer and the cosmetic organizer don’tmatch well.WHAT I DID & WHYAt the beginning of the class, I disc sanded the front for makingthe sides of front smoother. I used disc sander. It is useful but verydangerous. It turns so fast so I can sand the side very easily and Cutting the back by usingfast. However, sometimes there are too many dusts. That is why we tenon sawwear an apron and a goggle before using disc sander.Then I started making the second back of the drawer. I cut thewood bigger than the first back. That’s because I need the spacefor screwing so that the drawer and cosmetic organizer won’tseparate. I used smoothing plane to sand the long side of back.That’s because disc sander doesn’t have enough space for longside.LEARNER PROFILEI think I am a risk taker because I researched about the safetyrules about using smoothing plane. I also asked Mr. Andersonabout how to use the smoothing plane. Sanding the side of the backPLAN for making it smootherMy plan is to finish making the back and glue two backs. I didn’tmention in the Gantt Chart.CHANGES TO YOUR PLANI wrote ‘My plan is to make the front and the back.’. I am continuing to make the back and Ifinished making front. Therefore, there si no change to my plan.AREAS OF INTERACTION(AOI)I think it is Environment. I can save the materials such as paint, wood, sand paper, glue andscrew during creating the product. If only I do not waste the wood, people have to cut thewood little bit. If all the students save the wood and try not to waste the wood, lots of treeswill be cut. The more I save the materials, the more I save the environment.
  20. 20. MAKING COSMETIC ORGANIZER 18(11/03/11/Fri) Drilling and Screwing PROCESS JOURNALEMOTIONToday was very fun because I glued and drilled on the wood.Especially, I like glueing because I like to glue somethingstogether and clamp them. Clamping is the most interesting stage.Drilling is little bit hard because I have to hold the wood verytightly to make sure that I don’t drill in the wrong side.WHAT I DID & WHYTo begin with, I finished making two backs by using sandpaperand smoothing plane. Both of them are used for the last stage.Then I glued them together by using PVA glue. I used PVA glue Gluing on the back by usingbecause it is non-toxic and easy to remove. I can remove it by PVA glueusing wet tower.Then, I drilled on the side and the bottom of the cosmetic organizer by using cordless drill. Thereason why I drilled is to screw into them to make sure the drawer and cosmetic organizerdon’t separate after I finish making the project.LEARNER PROFILEI think I am a carer because I didn’t waste the wood and glue. Iused very small amount of glue. I used small size of the wood.Also, I used used-wood. I didn’t use new piece of wood.PLANMy plan is to screw the sides and cosmetic organizer and startmaking the drawer. It is not in my Gantt Chart.CHANGES TO YOUR PLAN Drilling on the side by usingI wrote ‘My plan is to finish making the back and glue two cordless drillbacks.’. I finished making back and also I glued the back i andback ii together. In addition, I drilled on the side so that I canscrew the side and original product.AREAS OF INTERACTION(AOI)II think it is Approaches to Learning. In this unit, I learnt lots of things. For example, I learnt anumber of tools that I havent used and I knew how to cut the wood and paint the productclearly and straightly. If I want to learn more, I can ask Mr. Anderson and other students forthe tools that they are using. In addition, I can share what I am using to other students.
  21. 21. MAKING COSMETIC ORGANIZER 19(11/03/14/Mon) Drilling and Screwing PROCESS JOURNAL EMOTION Today was very fun because I glued and drilled on the wood. Especially, I like glueing because I like to glue somethings together and clamp them. Clamping is the most interesting stage. Drilling is little bit hard because I have to hold the wood very tightly to make sure that I don’t drill in the wrong side. WHAT I DID & WHY To begin with, I drilled on the side and the bottom of the cosmetic organizer by using cordless drill. The reason why I drilled is to screw into them to make sure the drawer and cosmetic organizer don’t Cordless Drill separate after I finish making the project. I changed the drill bits frequently because I have to find proper drill bit which fits to the size of the screw that I am going to use. There are various types of drill bits. Some drill bits are with counter sink. Counter sink is very important thing. I couldn’t put the cosmetic organizer in the small place with digging out with counter sink. That’s because the head of the screw will come out. LEARNER PROFILE Vacuum Former I think I am a carer because I didn’t waste the wood and glue. I used very small amount of glue. I used small size of the wood. Also, I used used-wood. I didn’t use new piece of wood. PLAN My plan is to screw the sides and cosmetic organizer and start making the drawer. It is not in my Gantt Chart. CHANGES TO YOUR PLAN I wrote ‘My plan is to finish making the back and glue two backs.’. I finished making back and also I glued the back i and back ii together. In addition, I drilled on the side so that I can screw the side and original product. AREAS OF INTERACTION(AOI) I think it is Health and Social Education. I always wore safety goggles when I am working with machines because sometimes, the wood will crack and some pieces might be thrown in the air and hit my eyes. My product also considers the safety of the society as well. I tried my best to make the woods surfaces, corners and edges as smooth as possible so that the users do not get hurt by the sharp edges.
  22. 22. MAKING COSMETIC ORGANIZER 20(11/03/15/Tue) Drilling and Screwing PROCESS JOURNAL EMOTION Today was too tired because I did the same things just like yesterday which are drilling and screwing. WHAT I DID & WHY Firstly, I drilled the sides and the bottom by using cordless drill. I drilled very well, however, I made a mistake which is not wearing goggle. I have to wear the goggle every time Screwing the sides and the when I use the drill or disc sander. It is a safety rule. I will wear bottom by using screw driver goggle next time. Then, I screwing the sides and the bottom by using screw driver and screws. I used bigger screws which I didn’t plan to use. I planned to use smaller screws, however, I sued the drill bit which is bigger than the size of small screw. It was my mistake. So I found bigger ones and used them. Lastly, I made the back of the drawer. I cut the wood by using tenon saw because I wanted to make it fast. Then, I used disc sander and sand board. It is very useful and helpful. LEARNER PROFILE Sanding the back of the I think that I am a risk taker because I changed to bigger screw drawer quickly even though I made a mistake which is drilling by using big drill bit. I quickly solved the problem. PLAN My plan is to start making the drawer. For that, I will be cutting, disc sanding and glueing. Making the drawer is not in my Gantt Chart. CHANGES TO YOUR PLAN I wrote ‘My plan is to screw the sides and cosmetic organizer and start making the drawer.’. I screwed the sides and cosmetic organizer, however, I haven’t started making the drawer. AREAS OF INTERACTION(AOI) I think it is Community and Service. My products function is to be able to arrange the cosmetics and some other small objects put in one spot. This function will help the community by making their environments cleaner and more organized. Also, in the process of creating, I did not only concentrate on my work. Some of my friends came and helped me. Then, it is a part of service.
  23. 23. MAKING COSMETIC ORGANIZER 21(11/03/18/Fri) Chiselling and GlueingPROCESS JOURNALEMOTIONToday I was very fun because I chiseled and glued thewood. I like chiseling especially.WHAT I DID & WHYFirstly, I chiseled the front of the drawer by using chiseland hammer because there should be some space for thesides of the drawer. Chiseling is very fun, especiallyhammering. Put the chisel on the front wood, then hammerthe top of the chisel so that the sharp part of the chiselgoes into the wood easily. Chiseling the front of the drawerThen, I glued the pieces of wood by using wet used-cloth by using chisel&hammerand PYA glue because I cut the wood into several pieces.It was totally my fault. However, I really like glueing. I was so happy with glueing. PVA glue isnon-toxic so even children can use it. In addition, It can be gotten rid of very easily by usingwet used-cloth. That’s why I used wet-tower.LEARNER PROFILEI think that I am open-minded. I chiseled the wood withoutrestrained. After Mr.Anderson said that I need to chisel thewood, I picked up the chisel and the hammer for chiseling.PLANMy plan is to finish making the drawer. I have to drill andscrew all the parts of the drawer. Glueing the pieces of the front by using PVA glueCHANGES TO YOUR PLANI wrote that ‘My plan is to start making the drawer.’, however, Mr.Anderson made the front,sides of the drawer already. I just had to make the back and the bottom of the drawer.AREAS OF INTERACTION(AOI)I think it is Human Ingenuity. I can give this product to people who need a cosmetic organizer. Ithink that teenagers will like this cosmetic organizer because it is playful and decorative. Forme, I will give cosmetic organizer to my younger sister. She really needs cosmetic organizerbecause her cosmetics such as nail polishes and lipsticks are lying on the floor. I will give herthe product for the environment of the room.
  24. 24. MAKING COSMETIC ORGANIZER 22(11/03/21/Mon) Chiselling and Planing PROCESS JOURNAL EMOTION Today I was very fun because I chiseled and glued the wood. I like chiseling especially. WHAT I DID & WHY Firstly, I chiseled the front of the drawer by using chisel and hammer because there should be some space for the sides of the drawer. Chiseling is very fun, especially hammering. Put the chisel on the front wood, then hammer the top of the chisel so that the sharp part of the chisel goes into the wood easily. Chiseling the front of the drawer Then, I planed the sides of the bottom. I can’t use the disc by using chisel&hammer sander because the length of the side is too long so it doesn’t fit to the length of disc sander. I used smoothing plane because it can plane the side of the wood very easily without using energy. It is very convenient so I use it usually. LEARNER PROFILE I think that I am open-minded. I chiseled the wood without restrained. After Mr.Anderson said that I need to chisel the wood, I picked up the chisel and the hammer for chiseling. Using Smoothing Plane(Video) PLAN My plan is to finish making the drawer. I have to drill and screw all the parts of the drawer. CHANGES TO YOUR PLAN I wrote that ‘My plan is to finish making the drawer.’, however, since we had only one period, I couldn’t finish making the drawer. AREAS OF INTERACTION(AOI) I think it is Environment. I can save the materials such as paint, wood, sand paper, glue and screw during creating the product. If only I do not waste the wood, people have to cut the wood little bit. If all the students save the wood and try not to waste the wood, lots of trees will be cut. The more I save the materials, the more I save the environment.
  25. 25. MAKING COSMETIC ORGANIZER 23(11/03/22/Tue) Gluing and Clamping PROCESS JOURNAL EMOTION I was very happy because I am really close to the end now. I just have to screw and paint! WHAT I DID & WHY I glued all the parts of the drawer. I glued on the hole on the front for the sides. If I do not glue and just start screwing, the drawer would be broken easily. I used PVA glue and wet used-cloth. PVA glue is so sticky, but very useful. It is so strong so that it makes the durability of the Glueing using PVA glue drawer longer. Then, I clamped by using a big and long clamp. I couldn’t use the small one because the width of the drawer is little wider than the clamp. There are many types of the clamps depending on the space that the clamp can open. Clamp is very good tool. It clamps the product so that the glue works well. LEARNER PROFILE I think I am a carer because I didn’t waste the wood and glue. I used very small amount of glue. I used small size of the wood. Also, I used used-wood. I didn’t use new piece of wood. PLAN Clamping by using sliding clamp My plan is to drill and screw the drawer, then I am going to do the assembly. May be I will start painting. CHANGES TO YOUR PLAN I wrote that ‘My plan is to finish making the drawer.’. I haven’t finished the AREAS OF INTERACTION(AOI) I think it is Approaches to Learning. In this unit, I learnt lots of things. For example, I learnt a number of tools that I havent used and I knew how to cut the wood and paint the product clearly and straightly. If I want to learn more, I can ask Mr. Anderson and other students for the tools that they are using. In addition, I can share what I am using to other students.
  26. 26. MAKING COSMETIC ORGANIZER 24(11/03/25/Fri) Drilling and ScrewingPROCESS JOURNALEMOTIONI was little bit tired today because I drilled and screwed. Idrilled and screwed for more than ten times.WHAT I DID & WHYI drilled by using cordless drill. The reason why I drilled is tomake the drawer stronger. The durability of the drawerwould be longer if I drill and screw on it. I want to make thedurability as longer as possible. I used cordless drill because Drilling the back side of theit is very convenient. It doesn’t have a cord as you can see at drawer using cordless drillthe word ‘cordLESS drill’Then, I screwed into the hole that I drilled by using screwdriver and appropriate size of thescrew. The size of the screw depends on the size of the drill bit. If I used small drill bit, I haveto use small screw.LEARNER PROFILEI think that I am a risk taker because I changed to biggerscrew quickly even though I made a mistake which is drillingby using big drill bit. I quickly solved the problem.PLANMy plan is to start painting. The colors for the drawer arewritten in the process journal number 11.CHANGES TO YOUR PLAN Screwing into the hole that II wrote ‘My plan is to drill and screw the drawer, then I am drilled using a screwdrivergoing to do the assembly.’. I drilled and screwed. I finishedthem. Also, I did assembly to find the problems before I paintthe drawer. Therefore, there is no any change to my plan.AREAS OF INTERACTION(AOI)I think it is Health and Social Education. I always wore safety goggles when I am working withmachines because sometimes, the wood will crack and some pieces might be thrown in the airand hit my eyes. My product also considers the safety of the society as well. I tried my best tomake the woods surfaces, corners and edges as smooth as possible so that the users do notget hurt by the sharp edges.
  27. 27. MAKING COSMETIC ORGANIZER 25(11/03/28/Mon) Start Painting PROCESS JOURNAL EMOTION I was so happy because I started painting. Starting painting means that I am very close to the end! WHAT I DID & WHY I painted all the parts of the Showing how to drawer(back, front, sides, bottom…). I paint clearly by used tape, unfolded box, paint brush, using tape water bottle, towel and paint. Unfolded box for preventing that my Picture 1 Painting the spaces for the clear cloth or the desk. paint brush for painting, and straight triangle using paint water bottle for washing the dirty paint brush brush, and towel for absorbing the water in the paint brush. The most important thing for today was tape. I used tape to paint very clearly and easily. I cut the tape to the shape of triangle that I want, then painted the background color which is orange. Next, I teared off the tape like picture 1. LEARNER PROFILE I think I am a carer because I didn’t waste the wood and the paint. I didn’t waste the paint when I was painting the sides. I dig only small amount of paint using useless wood stick. PLAN My plan is to stick the tapes on the paint and cut them following the line of the triangles. Then, paint on them that the paint doesn’t spread. CHANGES TO YOUR PLAN I wrote that ‘My plan is to start painting.’ I started painting just like what I wrote. Therefore, there is no any changes to my plan. AREAS OF INTERACTION(AOI) I think it is Community and Service. My products function is to be able to arrange the cosmetics and some other small objects put in one spot. This function will help the community by making their environments cleaner and more organized. Also, in the process of creating, I did not only concentrate on my work. Some of my friends came and helped me. Then, it is a part of service.
  28. 28. MAKING COSMETIC ORGANIZER 26(11/03/29/Tue) Finish Painting PROCESS JOURNAL EMOTION I was little bit boring because I continued painting. Even though I like painting, I do not like to paint for two, three and four periods. I hope I don’t have to paint again. WHAT I DID & WHY I continued painting. I used unfolded box, paint brush, paint and a bottle of water. Unfolded box protects the table. Sometimes, some students put their paint brushes on the table. Then, the table gets dirty because of the paint on the paint brush. I used a bottle of water because extremely dried-paint doesn’t work. Painting the spaces for the clear and straight triangle using paint At the end of the class, I started sanding. The edges of the brush drawer should be smooth, not sharp. If they are sharp, people sometimes gets hurt. I used sand paper because it is the most convenient tool for sanding. File is heavy and hard to deal with. LEARNER PROFILE I think I am a carer because I didn’t waste the wood and the paint. I didn’t waste the paint when I was painting the sides. I dig only small amount of paint using useless wood stick. PLAN My plan is to do an assembly which is very important stage in Create stage. Sanding the edges of the drawer by using sand paper CHANGES TO YOUR PLAN I wrote that ‘My plan is to stick the tapes on the paint and cut them following the line of the triangles.’. I used tapes to paint clearly. Therefore, there is no changes to my plan. AREAS OF INTERACTION(AOI) I think it is Human Ingenuity. I can give this product to people who need a cosmetic organizer. I think that teenagers will like this cosmetic organizer because it is playful and decorative. For me, I will give cosmetic organizer to my younger sister. She really needs cosmetic organizer because her cosmetics such as nail polishes and lipsticks are lying on the floor. I will give her the product for the environment of the room.
  29. 29. MAKING COSMETIC ORGANIZER 27(11/04/01/Fri) Handle of the drawerPROCESS JOURNALEMOTIONToday, I was very fun because I started attaching the handleand finished in two periods. However, cutting the screw in theproper size was little bit hard.WHAT I DID & WHYI chose the appropriate handle for my product. It is very cute,but simple. I like this kind of design. After choosing the handle, Cutting the screw in the properI cut the screw by using hack saw. It is very useful for cutting size for the handlethe metal, steel. It can cut the screw very easily. The hardestthing was cutting it in the proper size. The length of the screwdepends on the thickness of the front of the drawer and thedeepness of the inside space for the screw of the handle. I cutabout four to five times to make the screw in the proper size.LEARNER PROFILEI think that I am a risk taker because I asked to Jung Min forthe appropriate saw to cut the screw. Then, Jung Min said hacksaw would be great.PLAN Finished attaching handleMy plan is to check my product whether there is came offpaint or not. If so, I will be painting again.CHANGES TO YOUR PLANI wrote ‘My plan is to do an assembly which is very important stage in Create stage.’.Unfortunately, I couldn’t do an assembly because I had to attach the handle. I have to do asassembly on the next period.AREAS OF INTERACTION(AOI)I think it is Environment. I can save the materials such as paint, wood, sand paper, glue andscrew during creating the product. If only I do not waste the wood, people have to cut thewood little bit. If all the students save the wood and try not to waste the wood, lots of treeswill be cut. The more I save the materials, the more I save the environment.
  30. 30. MAKING COSMETIC ORGANIZER 27(11/04/12/Tue) Filing and Sanding PROCESS JOURNAL EMOTION Today was very busy because I wanted to finish the product today. So I decided to do lots of things in a very short time. WHAT I DID & WHY I sanded and filed all the sharp edges because people will be hurt by the sharp edges. I used sandpaper and flat file. Sandpaper is very useful and convenient Painting on the product using paint because I can band and make the shape to sand the brush and orange color paint edge. Flat file can file very fast and easily. Therefore, I file the edges first and make them smoother by using sandpaper. When I sand and file the wood, the paint came off, so I had to paint again. I used black color marker and paint. Black color marker is much more convenient than the paint. Painting needs many tools such as paint brush, a bottle of water and unfolded box. LEARNER PROFILE I think I am a carer because I didn’t waste the wood and the paint. I didn’t waste the paint when I was painting the sides. I dig only small amount of paint using useless Sanding the sharp edges to make wood stick. them smoother PLAN I’m finished. There is no plan anymore. CHANGES TO YOUR PLAN I wrote ‘My plan is to check my product whether there is came off paint or not. If so, I will be painting again.’. I checked my product and found some spaces that the paint came off. In addition, I also found many sharp edges. So I filled, sanded and painted again. AREAS OF INTERACTION(AOI) I think it is Approaches to Learning. In this unit, I learnt lots of things. For example, I learnt a number of tools that I havent used and I knew how to cut the wood and paint the product clearly and straightly. If I want to learn more, I can ask Mr. Anderson and other students for the tools that they are using. In addition, I can share what I am using to other students.
  31. 31. MAKING COSMETIC ORGANIZER 28(11/04/15/Fri) Digging out and ClampingPROCESS JOURNALEMOTIONToday was so confused and ashamed because I found thedrawback of the drawer. It doesn’t go in well.WHAT I DID & WHYAt the beginning of the class, I found the problem which isthe drawer. The drawer can’t go in well because of thescrews. Therefore, I decided to dig out little bit on the sidesof the drawer. Then, I marked and Mr.Anderson diggedout using big machine. Digged out spaceThen, I clamped small size of the wood stick and thedrawer because the drawer wasn’t tight enough. I usedtwo small clamps and two wood sticks because I don’twant to make the mark from the clamps on the drawer. Iused small clamps because the thickness of the side of thedrawer and small wood stick was pretty thin.LEARNER PROFILEI think I am a carer because I didn’t waste the wood andthe paint. I didn’t waste the paint when I was painting thesides. I dig only small amount of paint using useless woodstick. Clamping the drawer and very thinPLAN stick using small clampsI’m finished. There is no more plans.CHANGES TO YOUR PLANI wrote ‘I’m finished. There is no plan anymore.’ but I was not finished I had one more task todo which is digging out the sides of the drawer. The drawer doesn’t go in well because of thescrews.AREAS OF INTERACTION(AOI)I think it is Health and Social Education. I always wore safety goggles when I am working withmachines because sometimes, the wood will crack and some pieces might be thrown in the airand hit my eyes. My product also considers the safety of the society as well. I tried my best tomake the woods surfaces, corners and edges as smooth as possible so that the users do notget hurt by the sharp edges.

×