Ball valve
Upcoming SlideShare
Loading in...5
×
 

Ball valve

on

  • 640 views

 

Statistics

Views

Total Views
640
Views on SlideShare
640
Embed Views
0

Actions

Likes
0
Downloads
18
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

Ball valve Ball valve Document Transcript

  • 1352-SERIES Data Sheet Ref. No : SU-1352-00001Electrically Operated Ball Valve MODEL NO.: SUDETechnical Specifications 13525040BSPRBCSS6TPROP PUNE / BANGALORE SD-1000-05CPT200POT2LSSERVO Quotation Ref. No Quotation Date1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED WITH SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR2. MAKE SUDE3 APPLICATION Water Industries6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm Port Size 40mm End connection BSP Screwed Body Material Carbon Steel Ball Material SS316 Seating material Teflon Flowing medium Non-injurious to Body Ball & Seals Pressure 10 Bar Reduce Bore Single piece design, Antistatic fire safe Type of construction Ball valve Temperature Ambient Characteristic Proportionate Sdtork Make Single Phase Quarter Turn Electric Fitted with Actuator Supply Voltage 230 V AC.ACTUATOR DETAILS3.1 Model SD-1000-053.2 Output motion type Linear3.3 Output Torque ( Nm ) 50 Nm3.4 Output speed ( Sec/90 °) 17 sec/90°3.5 Manual hand wheel PROVIDED3.6 Travel limit switches Type : 1 NO + 1 NC, change over contact, contact rating: 2 Nos 5 A, 230 V AC3.7 Torque limit switches Not required, AS 1000-series actuator are provided with stall duty motor3.8 Local indicator PROVIDED3.9 Class of Protection IP673.10 Weight of the actuator (Kgs.) 9 kgs.3.11 Duty S2-10 min3.12 Mounting3.14 G. A. Drawing Reference No3.15 Electrical Wiring Diagram Ref, NoMOTOR DETAILS4.1 Type Reversible Single Phase Synchronous Stall Duty Motor4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr.
  • 4.4 Insulation Class F4.5 Rating ( Watts) 110 WattsOPTIONAL ACCESSORIES5.1 Feedback Out put : 100-235 Ohms Provided Potentiometer5.2 Additional Limit Qty : 2 nos. Provided Switches Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided Supply : 12-36 VDC, Output : 4-20 m A5.4 Remote Position Available in servo controller Provided indicator Digital : 0-100 %5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Provided (Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC, Panel Mounted This will have auto calibration facility.5.6 Interface Card Input signal : 4-20 m A, Provided Feed back : 100-235 Ohms,5.7 Local Push Button This will consist of Auto /Off / Manual Provided Station selector switch, Open/Close push buttons.6 GENERAL POINTS 6.1 Inspection By Customer at our works 6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated BoxSPECIAL NOTE :
  • 1352-SERIES Data Sheet Ref. No : SD-1352-00002Electrically Operated Ball Valve MODEL NO.: SUDETechnical Specifications 13525040BSPRBCSS6TONF PUNE / BANGALORE SD-1000-052LS Quotation Ref. No Quotation Date1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED WITH SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR2. MAKE SUDE3 APPLICATION Water Industries6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm Port Size 40mm End connection BSP Screwed Body Material Carbon Steel Ball Material SS316 Seating material Teflon Flowing medium Non-injurious to Body Ball & Seals Pressure 10 Bar Reduce Bore Single piece design, Antistatic fire safe Type of construction Ball valve Temperature Ambient Characteristic On/Off Type Sdtork Make Single Phase Quarter Turn Electric Fitted with Actuator Supply Voltage 230 V AC.ACTUATOR DETAILS3.1 Model SD-1000-053.2 Output motion type Linear3.3 Output Torque ( Nm ) 50 Nm3.4 Output speed ( Sec/90 °) 17 sec/90°3.5 Manual hand wheel PROVIDED3.6 Travel limit switches Type : 1 NO + 1 NC, change over contact, contact rating: 2 Nos 5 A, 230 V AC3.7 Torque limit switches Not required, AS 1000-series actuator are provided with stall duty motor3.8 Local indicator PROVIDED3.9 Class of Protection IP673.10 Weight of the actuator (Kgs.) 9 kgs.3.11 Duty S2-10 min3.12 Mounting3.14 G. A. Drawing Reference No3.15 Electrical Wiring Diagram Ref, NoMOTOR DETAILS4.1 Type Reversible Single Phase Synchronous Stall Duty Motor4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply View slide
  • 4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr.4.4 Insulation Class F4.5 Rating ( Watts) 110 WattsOPTIONAL ACCESSORIES5.1 Feedback Out put : 100-235 Ohms Not Provided Potentiometer5.2 Additional Limit Qty : 2 nos. Provided Switches Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Not Provided Supply : 12-36 VDC, Output : 4-20 m A5.4 Remote Position Available in servo controller Not Provided indicator Digital : 0-100 %5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Not Provided (Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC, Panel Mounted This will have auto calibration facility.5.6 Interface Card Input signal : 4-20 m A, Not Provided Actuator Mounted Feed back : 100-235 Ohms,5.7 Local Push Button This will consist of Auto /Off / Manual Not Provided Station selector switch, Open/Close push buttons.6 GENERAL POINTS 6.1 Inspection By Customer at our works 6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated BoxSPECIAL NOTE : View slide
  • 1358-SERIES Data Sheet Ref. No : SU-1358-00001Electrically Operated Plastic Ball MODEL NO.: SUDEValve Technical Specifications 135850PVCPVCTPROPBSPSD- PUNE / BANGALORE 1000-052LSPOTSERVOCPT200 Quotation Ref. No Quotation Date1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED WITH SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR2. MAKE SUDE3 APPLICATION6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm End connection BSP Screwed Body Material PVC Ball Material PVC Seating material Teflon Flowing medium Acid Pressure 10 Bar Temperature Ambient Characteristic Proportionate Sdtork Make Single Phase Quarter Turn Electric Fitted with Actuator Supply Voltage 230 V AC.ACTUATOR DETAILS3.1 Model SD-1000-053.2 Output motion type Linear3.3 Output Torque ( Nm ) 50 Nm3.4 Output speed ( Sec/90 °) 17 sec/90°3.5 Manual hand wheel PROVIDED3.6 Travel limit switches Type : 1 NO + 1 NC, change over contact, contact rating: 2 Nos 5 A, 230 V AC3.7 Torque limit switches Not required, AS 1000-series actuator are provided with stall duty motor3.8 Local indicator PROVIDED3.9 Class of Protection IP653.10 Weight of the actuator (Kgs.) 9 kgs.3.11 Duty S2-10 min3.12 Mounting3.14 G. A. Drawing Reference No3.15 Electrical Wiring Diagram Ref, No3.16 Weight of Actuator – KgsMOTOR DETAILS4.1 Type Reversible Single Phase Synchronous Stall Duty Motor4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr.4.4 Insulation Class F4.5 Rating ( Watts) 110 WattsOPTIONAL ACCESSORIES
  • 5.1 Feedback Out put : 100-235 Ohms Provided Potentiometer5.2 Additional Limit Qty : 2 nos. Provided Switches Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Provided Supply : 12-36 VDC, Output : 4-20 m A5.4 Remote Position Available in servo controller Provided indicator Digital : 0-100 %5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Provided (Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC, Panel Mounted This will have auto calibration facility.5.6 Interface Card Input signal : 4-20 m A, Provided Feed back : 100-235 Ohms,5.7 Local Push Button This will consist of Auto /Off / Manual Provided Station selector switch, Open/Close push buttons.6 GENERAL POINTS 6.1 Inspection By Customer at our works 6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated BoxSPECIAL NOTE :
  • 1358-SERIES Data Sheet Ref. No : SU-1358-00002Electrically Operated Plastic Ball MODEL NO.: SUDEValve Technical Specifications 135850PVCPVCTONFBSPSD- PUNE / BANGALORE 1000-052LS Quotation Ref. No Quotation Date1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED WITH SINGLE PHASE QUARTER TURN ELECTRIC ACTUATOR2. MAKE SUDE3 APPLICATION6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm End connection BSP Screwed Body Material PVC Ball Material PVC Seating material Teflon Flowing medium Acid Pressure 10 Bar Temperature Ambient Characteristic On/Off Type Sdtork Make Single Phase Quarter Turn Electric Fitted with Actuator Supply Voltage 230 V AC.ACTUATOR DETAILS3.1 Model SD-1000-053.2 Output motion type Linear3.3 Output Torque ( Nm ) 50 Nm3.4 Output speed ( Sec/90 °) 17 sec/90°3.5 Manual hand wheel PROVIDED3.6 Travel limit switches Type : 1 NO + 1 NC, change over contact, contact rating: 2 Nos 5 A, 230 V AC3.7 Torque limit switches Not required, AS 1000-series actuator are provided with stall duty motor3.8 Local indicator PROVIDED3.9 Class of Protection IP673.10 Weight of the actuator (Kgs.) 9 kgs.3.11 Duty S2-10 min3.12 Mounting3.14 G. A. Drawing Reference No3.15 Electrical Wiring Diagram Ref, NoMOTOR DETAILS4.1 Type Reversible Single Phase Synchronous Stall Duty Motor4.2 Supply 230 V +/- 10 %, 50 Hz +/- 5 % AC Supply4.3 Duty S2-10 min / S-4-30 % 1200 Cycles/ hr.4.4 Insulation Class F4.5 Rating ( Watts) 110 WattsOPTIONAL ACCESSORIES
  • 5.1 Feedback Out put : 100-235 Ohms Not Provided Potentiometer5.2 Additional Limit Qty : 2 nos. Provided Switches Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC5.3 Two Wire Transmitter Type : Two wire, Actuator mounted Not Provided Supply : 12-36 VDC, Output : 4-20 m A5.4 Remote Position Available in servo controller Not Provided indicator Digital : 0-100 %5.5 Servo controller Input signal : 4-20 m A, Output : 4-20 m A Not Provided (Valve positioner) Feed back : 0-500 Ohms, supply 230 V AC, Panel Mounted This will have auto calibration facility.5.6 Interface Card Input signal : 4-20 m A, Not Provided Actuator Mounted Feed back : 100-235 Ohms,5.6 Control Panel This will consist of 2 nos. of Control Relay Not Provided with required control voltage (If not specify, control voltage will be 230 VAC ) Auto / Manual selector switch, Open/Close push buttons, emergency stop button & MCB.5.7 Local Push Button This will consist of Auto /Off / Manual Not Provided Station selector switch, Open/Close push buttons.6 GENERAL POINTS 6.1 Inspection By Customer at our works 6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated BoxSPECIAL NOTE :
  • 1362-SERIES Data Sheet Ref. No : SU-1362-00001Pneumatically Operated Ball MODEL NO.: SUDEValve Technical Specifications 13625040BSPRBCSS6TPROPDA0 PUNE / BANGALORE 5VPITPPT Quotation Ref. No Quotation Date1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR2. MAKE SUDE3 APPLICATION Water Industries6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm Port Size 40mm End connection BSP Screwed Body Material Carbon Steel Ball Material SS316 Seating material Teflon Flowing medium Non-injurious to Body Ball & Seals Pressure 10 Bar Reduce Bore Single piece design, Antistatic fire safe Ball Type of construction valve Temperature Ambient Characteristic Proportionate Sude Make Pneumatic DA05 Double Acting Actuator, Fitted with Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean Dry Air4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA05 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar
  • 4.18 Quality Of Air Filtered & Clean Dry Air 4.19 Opening and Closing Time 0.28 [Open] & 0.28 [Close]5 OPTIONAL ACCESSORIES 5.1 Valve Positioner Input signal: 60 PSI & 3 to 15 PSI Provided 5.2 I to P Converter Input signal: 22 PSI & 4-20mA Provided 5.3 Position Output: 4-20mA Provided Transmitter6 GENERAL POINTS 6.1 Inspection By Customer at our works 6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated BoxSPECIAL NOTE :
  • 1362-SERIES Data Sheet Ref. No : SU-1362-00002Pneumatically Operated Ball MODEL NO.:Valve Technical Specifications 13622520RBS6S6TONFFL15DA00 1182B2WNCMID063.1BSPBRS4BN SUDE ONFSPC1230VACGP1182B2WNCMI PUNE / BANGALORE D158.0BSPS4S4BNONFSPC2230VA CGP Quotation Ref. No Quotation Date1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR2. MAKE SUDE3 APPLICATION Oil Weighing Machine6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 25mm Port Size 20mm End connection Flanged to ASA150RF Body Material SS316 Ball Material SS316 Seating material Teflon Flowing medium Oil Pressure 10 Bar Type of construction Reduce Bore Single piece design Temperature Ambient Characteristic On/Off Type Sude Make Pneumatic DA00 Double Acting Actuator, Signal Fitted with Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and Lubricated4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA00 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel
  • 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing Time 0.28 [Open] & 0.28 [Close]5 OPTIONAL ACCESSORIES 5.1 Two Numbers 2 Normally Closed Construction of ¼” size – 1 no. Provided Way Midget type & ½” – 1 no. having Coil voltage of 230 V AC Supply in General Purpose Housing, Input signal: Direct Acting Pulse from the controller Solenoid Valve6 GENERAL POINTS 6.1 Inspection By Customer at our works 6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated BoxSPECIAL NOTE :
  • 1362-SERIES Data Sheet Ref. No : SU-1362-00003Pneumatically Operated Ball MODEL NO.: 1362200150RBS6S6TONFFL15DA40 SUDEValve Technical Specifications PUNE / BANGALORE 1184D4W5P3PDCPOP066.0BSPALS4B NSPC1230VACGPWPLSBFRLGB Quotation Ref. No Quotation Date1. ITEM ASSEMBLY OF 2 WAY BALL VALVE FITTED PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR2. MAKE SUDE3 APPLICATION Water / Oil Industries6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 200mm Port Size 150mm End connection Flanged to ASA150RF Body Material SS316 Ball Material SS316 Seating material Teflon Flowing medium Non-injurious to Body Ball & Seals Pressure 10 Bar Reduce Bore Single piece design, Antistatic fire safe Ball Type of construction valve Temperature Ambient Characteristic On/Off Type Sude Make Pneumatic DA40 Double Acting Actuator, Signal Fitted with Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and Lubricated4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA40 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel
  • 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing 0.28 [Open] & 0.28 [Close] Time5 OPTIONAL ACCESSORIES 5.1 4 Way 5 Port 3 Of ¼” size having Aluminum body with Coil Provided position Double voltage of 230 V AC Supply Coil poppet type solenoid valve 5.2 Weather Proof Consisting of 2 nos micro switches having 1 NO + Provided Limit switch box 1 NC contacts for sensing end position of the valve 5.3 Filter Regulator & Of ¼” Size supplied with Gauge Provided Lubricator 5.4 Gear Box For Manual operation Provided6 GENERAL POINTS 6.1 Inspection By Customer at our works 6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated BoxSPECIAL NOTE :
  • 1368-SERIES Data Sheet Ref. No : SU-1368- 00001Pneumatically Operated Plastic 136850BSPPVCPVCTPROPDA05EP SUDEBall Valve Technical POSFBPT PUNE / BANGALORESpecifications Quotation Ref. No Quotation Date1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR2. MAKE SUDE3 APPLICATION6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm End connection BSP Screwed Body Material PVC Ball Material PVC Seating material Teflon Flowing medium Acid Pressure 10 Bar Temperature Ambient Characteristic Proportionate Sude Make Pneumatic DA05 Double Acting Actuator, Signal Fitted with Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean Dry Air4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA05 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered & Clean Dry Air 4.19 Opening and Closing 0.28 [Open] & 0.28 [Close] Time
  • 5 OPTIONAL ACCESSORIES 5.1 Siemens make Having Input supply: 60 PSI & 4-20mA, Output Provided Electro Pneumatic supply: 4-20mA, Inbuilt with Position Transmitter Positioner6 GENERAL POINTS 6.1 Inspection By Customer at our works 6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated BoxSPECIAL NOTE :
  • 1368-SERIES Data Sheet Ref. No : SU-1368-00002 SUDEPneumatically Operated Plastic MODEL NO.: PUNE / BANGALOREBall Valve Technical 136850BSPPVCPVCTONFDA05AFSpecifications RALR2FCVWPLSB Quotation Ref. No Quotation Date1. ITEM ASSEMBLY OF 2 WAY PLASTIC BALL VALVE FITTED PNEUMATIC ROTARY DOUBLE ACTING ACTUATOR2. MAKE SUDE3 APPLICATION6 TECHNICAL SPECIFICATION OF 2 WAY BALL VALVE Valve Size 50mm End connection BSP Screwed Body Material PVC Ball Material PVC Seating material Teflon Flowing medium Acid Pressure 10 Bar Temperature Ambient Characteristic On/Off Type Sude Make Pneumatic DA05 Double Acting Actuator, Fitted with Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and Lubricated4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA05 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing Time 0.28 [Open] & 0.28 [Close]
  • 5 OPTIONAL ACCESSORIES 5.1 Air Filter Regulator Of ¼” Size supplied with Gauge Provided 5.2 Air Lock Relay Provided 5.3 Flow Control valve 2 nos for Slow opening & Slow closing Provided 5.2 Weather Proof Consisting of 2 nos micro switches having 1 Provided Limit switch box NO + 1 NC contacts for sensing end position of the valve6 GENERAL POINTS 6.1 Inspection By Customer at our works 6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated BoxSPECIAL NOTE :