Your SlideShare is downloading. ×
Info Mipa ziehspachtel pl10
Info Mipa ziehspachtel pl10
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×
Saving this for later? Get the SlideShare app to save on your phone or tablet. Read anywhere, anytime – even offline.
Text the download link to your phone
Standard text messaging rates apply

Info Mipa ziehspachtel pl10

4,315

Published on

Special Putty

Special Putty

Published in: Automotive
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
4,315
On Slideshare
0
From Embeds
0
Number of Embeds
9
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. Mipa Ziehspachtel PL10 Product Information gb 2/0910 page 1 / 2 Product description Description : Mipa Ziehspachtel PL10 is an elastic two-component long-term paste filler based on unsaturated polyester resins. To be used for iron, steel, aluminium and glass fibre reinforced materials. Due to its fine grain the putty is also suitable for application in very thin coats. Its long pot life allows spot-repair on very large areas. Temperature stability by short time exposure up to 180 °C. Operational Sector : Mipa Ziehspachtel PL10 is particularly qualified for the repairment of larger body areas especially in commercial vehicle sector and to level out the unevenness on machine parts. Due to its resin formulation, this type of putty is also suitable for powder coating. Resistant to the high stoving temperatures. To be applied from thick to extreme thin (towards zero) coats. Binder base : Unsaturated polyester resins Colour : Grey Storage : At least 1 year, if the original tins are kept closed. VOC Legislation: EU limiting value for the product (cat. B/b): 250 g/l (2007) This product contains max. 15 g/l VOC [0.125 lbs/gal] Application Substrate Treatment : Clean, derust, degrease and sand roughly the surface. Old coats have to be totally removed only in case of thermoplastic coats, nitro-cellulose based paint as well as acid reacting coats; otherwise it will be enough to sand roughly the substrate to ensure that the key is adequate. Degrease and sand roughly the epoxy substrates. Same procedure for glass fibre reinforced plastics. After that mix well Mipa Ziehspachtel PL10 with hardener and apply in the desired coat thickness. Subsequently insulate with a groundcoat Mipa 1K or 2K- Grundierung. Mixing ratio : Mix well Mipa Ziehspachtel PL10 with approx. 2 - 3% Härter P (by weight). An excess use (more than 3%) of hardener can result in a stained surface. This data sheet is for information purpose only! To our knowledge the data provided complies with the latest standard and is based on years of experience in the manufacture of our products. However the data is not binding and without warranty. Please follow recommendations stated on the relevant safety data sheet and precautions stated on the product label. We reserve our right to make additions, deletions, or modifications to the information at any time without prior notification. MIPA AG · D-84051 Essenbach · Tel. 08703/922-0 · Telefax 08703/922-100
  • 2. Mipa Ziehspachtel PL10 Product Information gb 2/0910 page 2 / 2 Pot life : At 20 °C and an amount of 2 % hardener Mipa Härter P, the paste remains workable for up to 10 - 15 minutes. Drying : At 20 °C full cure after about 60 minutes. The proc ess can be accelerated by force drying at 50 - 60°C or by usin g IR-lamps. Attention: the polyester putty will not harden at under + 15 °C. Sanding : Sand dry after approx. 1 hour. Rough sanding with P80 - P120 grade paper Final sanding with P240 - P280 grade paper before the application of the groud coat. Safety instructions Keep away from children. Keep containers in well ventilated rooms. Keep away from food, drink and animal feeding stuffs. Do not breathe aerosol. Avoid contact with eyes. If swallowed, seek medical advice immediately and show this container or label. Cleaning of tools Tools should be cleaned immediately after use with an universal diluent Mipa Universalverdünnung. When set hard the putty cannot be removed. This data sheet is for information purpose only. To our knowledge the data provided complies with the latest standard and is based on years of experience in the manufacture of our products.However the data is not binding and without warranty. MIPA AG · D-84051 Essenbach · Tel. 08703/922-0 · Telefax 08703/922-100

×