Mipa 2K-Plastic-Grundierfiller                                              gb 6/01011                                    ...
Upcoming SlideShare
Loading in …5
×

Info mipa 2 k plastic-grundierfiller

735 views
635 views

Published on

info Mipa 2K-Plastic-Grundierfiller

Published in: Automotive, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
735
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Info mipa 2 k plastic-grundierfiller

  1. 1. Mipa 2K-Plastic-Grundierfiller gb 6/01011 page 1 / 1 Product Information Fast drying primer-surfacer with direct adhesion to all plastic materials usually found in automotive industry (PP-EPDM, ABS, PC, ABS-PC, PMMA, PBTP, PA, SAN, PUR, PPO, PVC, GfK, SMC). To be used as adhesion promoter and filler in an unique operation. Wet on wet application is also possible. Recoatable with all 1K- and 2K-paints. Consumption: 10 - 11 m²/l by 25 m. Colour dark grey (approx. RAL 7011) Mixing ratio 4 : 1 by volume; 5 : 1 by weight Hardener Mipa 2K-Härter H 10, MS 10, Multi Thinner Mipa 2K-Verdünnung normal or Mipa 2K-Verdünnung kurz; Addition: 5 - 10 % Spraying viscosity 20° C 16 - 18 s 4 mm DIN Application Spraying pressure Spraying nozzle Spraying operations Air/Flow jar 3 - 4 bar 1,4 - 1,5 mm 2 HVLP 2,5 - 3 bar 1,3 - 1,6 mm 2 (nozzle int. pres.: 0,7 bar) Pot life 4-5h Coat thickness / dry film 20 - 30 m Curing time /flash off time 10 minutes Dry recoat time dust dry set to touch full hardeness Object temp. 20° C 30 min. 25 - 30 min. 60 - 70 min. Object temp. 60° C 15 min. 10 - 15 min. 20 - 30 min.Recommandations:Processing conditions: Do not apply below + 10°C and more than 80 % relative air humidity.By longer storage periods an oil film can occur. In this situation stir the content to restore theinitial consistency.Storage life: at least 3 years, if stored in tightly closed original containers.Please consider the recommendations for plastic coating “Lackieraufbau L7Kunststofflackierung”Marking VbF Hazardous materials ordinanceMipa 2K-Plastic-Grundierfiller AI highly inflammable; XnThis data sheet is for information purpose only. To our knowledge the data provided complies with the latest standard and is based on years of experience in the manufacture of our products. However the data is not binding and without warranty. MIPA AG · D-84051 Essenbach · Tel. 08703/9220 · Telefax 08703/922100

×