On October 23rd, 2014, we updated our
By continuing to use LinkedIn’s SlideShare service, you agree to the revised terms, so please take a few minutes to review them.
Your accountable solar energy utilizer and solution provider.
TP SOLAR Founded in 1989, TP Solar Energy Group is ent patents covering vacuum tubes, heat one of the earliest and original renewable storage technology and collectors, TP Solar energy company committed to providing Energy Group was accredited as the SolarHarnessing the Sun world-leading, efficient and cost effective Thermal Industrial and Development Basefor Everyone solar thermal solutions to satisfy today’s by United Nations Industrial Development environmental concerns. Our mission is Organization in 2010. to harness solar energy for everyone in TP Solar is also specialized in professional effort to advocate a new energy culture system designing and providing technical worldwide through innovation and system consultance for residential and commercial integration practice. applications in solar energy integrations. TP Solar provides complete solar thermal Our footprints has accumulated over 2 mil- hot water solutions for domestic and com- lion square meters with a wide range of ap- mercial applications, delivering up to 100% plication on large residential and commercial of a buildings hot water for space and water solar hot water and space heating systems, heating. These packaged solutions utilise industrial process heating, water treatment proven vacuum tube or flat plate solar pan- and desalination, solar cooling, active and els technology. TP solar thermal solutions passive solar building, agricultural heating provide optimum solar to hot water heating and drying. output efficiency and include the necessary ancillaries for building integration and user operation. The superior performance of the vacuum tube system can also provide specialized industrial heating and cooling applications. Investment in manufacturing technology, research and design and infrastructure are01 the keys to TP’s success. With an annual manufacturing capacity over 2 million solar water heaters and more than 30 independ-
TP Solar Headquarter in TP Solar in NumbersBeijing AccountabilityProject Founded in 1989, the earliest solar energy2008 Olympic Games Demonstration solution provider in ChinaProject – Renewable Energy Integrated Production CapacityBuilding Over 2,000,000 solar water heater annualApplication production & sales capacity, one of theFunction including 24 hours domestic hot leading solar energy group in the worldwater, air-conditioning, space heating, Technology Innovationswimming pool heating and photovoltaic Over 30 innovative & reforming technicalpower in one building with integrated TP Solar International Business Unit patents covering every components of aarchitecture design and renewable energy solar system Addresstechnology application Room 1810B, Tower A, Sanlitun SOHO, No.8 Gong Ti Project Foot Print North Road, Chaoyang District, Beijing, PRC Over 2,000,000 m2 accumulated project Telephone area of various applications in residential, +86-10-5785-3022 commercial and industrial sector Fax +86-10-6580-0770 E-mail firstname.lastname@example.org Website www.tp-solar.com Beijing Yufa Manufacture Base02/03 Address No. 8 Yuchang Road, Yufa Industrial Zone, Daxing District, Beijing, PRC
Contents 05 TP Evacuated Tube Technology 06 TP Spiral Tube 08 TP Plum Blossom Tube 10 Regular Evacuated Tube 12 TP Collectors Performance 13 Dry System – U pipe Series 16 Dry System – Heat pipe Series 18 Dry System – Flat Plate Series 20 Full Adaptability in Architecture-Direct Flow Evacuated Tube Series 22 TP Solar Water Heaters Systems 23 Non-pressure Series 26 Pressurized Split Series 28 Project System Revolution – Easylife 31 Easylife Hot Water 31 Easylife Potable Hot Water 31 Easylife Hot Water & Space Heating 31 Integrated Easylife Array 32 TP Solar Thermal Solutions 32 Our Honored Customers 33 The Biggest Solar Industrial Process Heating Project Worldwide 34 Reliable Partner of Olympic Games 35 Integrated System of Solar PV and Solar Thermal 36 Solar Thermal System for Residential Application 37 Solar System for Agricultural Application 38 Low-carbon Solutions for Buildings and Communities 38 Low-carbon Industry Zone 39 Demonstration Building on Renewable Energy 39 Sweet Rose Resort 40 Our Services
04/05TP Evacuated TubeTechnologyInnovation Makes Us Different
TP Spiral TubeIn so many ways, we are reforming.30% higher system energy efficiency,30% lower system costs
06/07 TP Evacuated Tube TechnologyTP Spiral TubeTP Patent-Spiral Tube 0°C 90°C Benefits TP AdvantagesTechnology 9 °C • Hot water is immediately available with • Due to the synergized function of heat 75• Provided with 2 types of temperature as high as 90°C. collecting and water storage, there is °C structures no need for water tank, declining the 21 • Hot water can be stored in a storage system cost around 30%. °C tank protecting from heat loss in case 18 5°C of low temperature or at night. • Multiple Tubes Series connection contributes to an increase of 30% • Operating in pressurised system, hot efficiency. water is in a rich supply. Outer Glass Tube Ø70mmx1800mm • No need to use frames with perfect Inner Glass Tube Ø58mm • It can be set with flexibility with a integration of any kinds of angle and Spiral Tube Ø16mm/Ø12mm smart-controlled system, ensuring surfaces. Stagnation Temperature 250°C efficiency and safety. Absorptive Coating Cu/SS-AlN/AlN • Smart-controlled system for watering • Collector area can be designed with Absorptivity ≥0.94 process can achieve a decrease of heat flexibility so to raise utilization ratio of Emissivity ≤0.06 loss in maximum, ensuring high system heating space. Vacuum Degree ≤5X10 Pa-4 safety in cold, windy or humid weather Glass Expansion Index 3.3X10-6 /°C • Suitable for project in any scale. conditions. Hail Resistance Diameter 30 • It’s easier to install and maintain.
08/09 TP Evacuated Tube TechnologyTP Plum BlossomTubeBenefits TP Advantages +15%• Retaining all the features of vacuum tube, the Plum Blossom Tube is provided with • The absorber area of axial polygon higher efficiency compare with the same size products. structure increased by 15% compar- ing with the same size vacuum tubes, Outer Glass Tube Ø58mmx1800mm leading a higher heat collecting capacity. Inner Glass Tube Ø47mm Absorptive Coating Cu/SS-AlN/AlN Absorptivity ≥0.94 • The tube in blossom shape results in Emissivity ≤0.06 effective heating from less water in Stagnation Temperature 250°C the tube. The special surface of tube +15% Vacuum Degree ≤5X10-4 Pa medium helps auto cycling to increase the efficiency by speeding up the Hail Resistance Diameter 30 water flow.
Regular Evacuated TubeAdvanced in details.Identified by its superior quality and re-fined technology
10/11 TP Evacuated Tube TechnologyRegular EvacuatedTubeTP Advantages• High quality glass-unique properties give good transmissibility with low reflection losses and high durability.• Advanced automation production line provides with superior coating quality, which make coating absorptivity of ≥94%, and emissivity of ≤ 6%. In addition, accurate production technology ensures high quality.• Specialized pumping technologies and a unique barium getter create a high vacuum in the tubes.• TP provides vacuum tubes with a range of sizes for your customized demands. Outer Glass Tube Ø47mm Ø58mm Ø70mm Inner Glass Tube Ø37mm Ø47mm Ø58mm 1350mm, 1500mm, 1500mm, 1600mm, Length 1800mm, 2008mm 1600mm 1800mm, 2008mm Stagnation Temperature 250°C Absorptive Coating Cu/SS-AlN/AlN Vacuum Degree ≤5.0×10-4pa Absorptivity ≥0.94 Emissivity ≤0.06 Hail Resistance Diameter 30
12/13 Dry System – U pipe Series Inspiring high-performance.
TP CollectorsPerformanceDry System – U pipe SeriesInspiring high-performance.TP Dry System-U PipeCollector Aluminum Manifold Tank Vacuum Tube Ø58x1800 (mm) Cold Liquid Inlet Header Copper Pipe Vacuum Tube Amount 12 – 36PCS1 U Pipe Ø8×0.6mm, Copper U Pipe Liquid Anti-freeze Liquid 0.26L per tube2 5 Heat Transfer Fin Absorptive Coating Cu/SS-AlN/AlN34 Aluminum Frame Vacuum Degree ≤5.0×10-4pa 6 Absorptivity ≥0.94 Emissivity ≤0.06 End Cap Stagnation Temperature 250°C 1 Outer Tube Average Heat Loss 22W/m2 °C 2 Vacuum Layer 3 Absorptive Coating Insulation PUR, CFC-free 4 Aluminum Heat Transfer Fin Max. Pressure 10 bar 5 U Pipe (Hot Terminal) Manifold Material 304 Stainless Steell 6 U Pipe (Cold Terminal) Sealing Material Silicon Ring
14/15 TP Collectors PerformanceDry System – Upipe SeriesBenefits TP Advantage• The U pipes in the evacuated tubes, water needs-reducing dependence on • Specialized pumping technologies against damage from hail and other which actually bond on themselves increasingly expensive fossil fuels. and an unique barium getter create elements. at the bottom of the glass tube and a superior vacuum in the tube, over a • Works from dawn until dusk and • A single tube can, if necessary, be medium returns directly into the mani- longer period of time and ensure low throughout the year. exchanged without interruption of the fold. This enables the medium travel heat loss. heating cycle. through for heat transferring. It will • Supports space heating applications • High quality glass-unique properties be connected with pipe lines encircled and supply hot water about 30% more • Copper U-shaped tubing and absorber give good transmissibility with low re- the inner layer of water storage tank, efficient than flat plate collectors. for unsurpassed heat conduction. flection losses and increased durability. which creates a far greater heat • Pressurized system work steadily and • Over 20-year lifespan transferring. • Advanced automation production line credibly. We can still keep the system provides with superior coating quality, • Low maintenance cost due to the• Especially suitable for cold weather, working with one of the tubes broken which make coating absorptivity of anti-freeze medium rarely needs to be U pipe collectors provide heat even in by replacing the broken one. ≥94%, and emissivity of ≤6%. changed. cold, windy or humid conditions. • Delivered with pressurized system, U • Quality warranty of 3 years.• Anti-freeze liquid is used for heat pip collector can be connected with transfer; there will be no water scale, • It can be aesthetically integrated with pipelines perfectly to provide you with freeze and tube explosion. buildings: install on both slope roof and rich water flow. flat roof, hang on southward walls and• Supplies up to 70% of your annual hot • Impact-resistant glass to protect south balcony, etc.
TP CollectorsPerformanceDry System-Heat pipe SeriesCreates the new efficiency generation.TP Dry System-Heat Pipe Collector Vacuum Tube Ø58x1800 (mm) Vacuum Tube Amount 12 – 36PCS Cold Liquid Inlet Heat Pipe Ø9.52×0.6mm, Copper Liquid Anti-freeze Liquid 0.26L per tube Absorptive Coating Cu/SS-AlN/AlN Vacuum Degree ≤5.0×10-4pa Absorptivity ≥0.94 Emissivity ≤0.06 Stagnation Temperature 250°C Insulation PUR, CFC-free Max. Pressure 10 barAbsorptive Hot Liquid Outlet Manifold Material 304 Stainless Steell Evacuated Tube Heat PipeCoating Sealing Material Silicon Ring
16/17 TP Collectors PerformanceDry System-Heatpipe SeriesBenefits TP Advantage• Especially suitable for cold weather, • Works from dawn until dusk and • Specialized pumping technologies • Delivered with pressurized system, U heat pipe collectors provide heat even throughout the year. and an unique barium getter create pip collector can be connected with in cold, windy or humid conditions. a superior vacuum in the tube, over a pipelines perfectly to provide you with • Heat tube collectors are about 30% longer period of time and ensure low rich water flow.• A superior vacuum in the tube can be more efficient than flat plate collec- heat loss. kept over a longer period of time to tors. • Impact-resistant glass to protect ensure low heat loss. • High quality glass-unique properties against damage from hail and other • A single tube can, if necessary, be give good transmissibility with low re- elements.• Anti-freeze liquid is used for heat exchanged without interruption of the flection losses and increased durability. transfer; there will be no water scale heating cycle. • Average lifespan of 20-year. and vacuum tube explosion. • Advanced automation production line • The plug-in connection of the tubes provides with superior coating quality,• Supplies up to 70% of your annual hot make it easily exchangeable. which make coating absorptivity ≥94%, water needs-reducing dependence on and emissivity ≤6%. • Quality warranty 3 years. increasingly expensive fossil fuels.
TP CollectorsPerformanceDry System – Flat Plate SeriesHigh performance – especially designed for tropical area Model Data PB2P-2.0 PB3P-2.0 PB1L-2.0 Dimension(mm) 1000×2000×76 1000×2000×76 1000×2000×76 Absorber Area 1.84m2 1.84m2 1.84m2 Gross Area 2m2 2m2 2m2 Copper Core Material Copper Copper TLF Absorptive Coating Black Chrome Plating Magnetron Sputtering Anodizing Welding Fusion Welding without Media Ultrasonic Welding Ultrasonic Welding Absorptivity ≥0.94 ≥0.95 ≥0.94 Emissivity ≤0.15 ≤0.06 ≤0.2 Stagnation Temperature 250°C 250°C 250°C Max. Pressure 10bar 10bar 10bar Liquid Anti-freeze Liquide, 2L Horizontal Header Ø25×0.6 (mm) Insulation Thickness 25mm, Glass Wool Back Plane Galvanized Steel Cover 4mm Tempered Glass or 3.2mm Low-iron Glass
18/19Dry System – FlatPlate SeriesBenefits TP Advantage• It’s cheaper than a vacuum tube col- • Flexible connection with pipe lines. lector. • Undergone strict thermal shock and• High performance, especially suitable tensile tests to guarantee quality. for tropical customers. • All mountingg sets are also available• It offers multiple mounting options for single and multiple –unit solar (on roof, integrated to the roof, facade systems. mountingg and free installation.) • Special sealing strip can keep the• It has good price-performance ratio. collector in a stable, efficient & strong situation.• It has good possibilities for do it your- self assembly. • Average lifespan of 20 years. • Quality warranty 3 years. • Flat roof mountingg systems enable installation of units on flat surface.
TP CollectorsPerformanceFull Adaptability in Architecture – DirectFlow Vacuum Tube SeriesResulting from 22 years manufacturing and development, TP evacuatedtubes always provided with highly advanced technology. Vacuum Tube Ø58x1800 (mm) Vacuum Tube Amount 12 – 60PCS Absorptive Coating Cu/SS-AlN/AlN Absorptivity ≥0.94 Emissivity ≤0.06 Stagnation Temperature 250°C Insulation PUR, CFC-free Max. Pressure 10 bar Manifold Material 304 Stainless Steell Sealing Material Silicon Ring
20/21 TP Collectors PerformanceFull Adaptability inArchitectureBenefits TP Advantage• In the form of direct through flow throughout the year. • Specialized pumping technologies • Impact-resistant glass to protect tubes it can be mounted horizontally and an unique barium getter create against damage from hail and other • 30% more efficient than flat plate on a flat roof, hence providing less a superior vacuum in the tube, over a elements. water heaters. wind load and lower installation costs. longer period of time and ensure low • It can be installed on a pitched or In this way penetration of the roof skin • Vacuum tube collector supports space heat loss. horizontal surface. is avoided. heating applications more effectively • High quality glass-unique properties than do glazed flat-plate. • Quality warranty 3 years.• Water as the heat transfer medium de- give good transmissibility with low re- liver heat through auto-cycling system. • Integrated well with the pipeline sys- flection losses and increased durability. tem, control system, and water storage• Supplies up to 70% of your annual hot • Advanced automation production line tank, it is an economical option for water needs-reducing dependence on provides with superior coating quality, hotel, school, hospital and swimming increasingly expensive fossil fuels. which make coating absorptivity ≥94%, pool. and emissivity ≤6%.• Works from dawn until dusk and
TP Solar WaterHeaters SystemsSatisfying various customer demand, weoffer you our unique product lines with arange of applications.
22/23 TP Solar Water Heaters SystemsNon-pressureSeries Patent Water Tank • TP patent water tank technology pro- vide with a down-streamed air exhaust to save heat loss by 15%. • The air inside water tank won’t come out until the water tank is full. The special down-streamed structure prevents heat loss through air exhaust day and night. Refined Vacuum Tube High Quality Bracket • High quality glass-unique properties • Adopting aluminum alloy as the raw give good transmissibility with low material of bracket, it is convenient reflection losses and long duration. to install, and more durable in humid climate. • Advanced automation production line provides with superior coating, which Intelligent Control System make coating absorptivity ≥94%, and • The water level and temperature can emissivity ≤6%. be intelligently controlled by a control- ler.
TP Solar WaterHeaters SystemsNon-pressure Series Name/Diameter/ Length / Water Tank Capacity / Major Modules Suitable Family Amount/Angle Total Capacity Water Tank Collector Bracket Size TPQ-Ø58×1800×18/48° 140L / 190L 3~6 Person TPQ-Ø58×1800×20/48° 165L / 220L Inner tank SUS304 stainless 4~7 Person Ø58 vacuum tube, borosili- TPQ-Ø58×1800×25/48°or38° 200L / 270L steel, polyurethane insula- Aluminum Alloy 4~8 Person cate 3.3 glass TPQ-Ø58×1800×25/48°or38° 245L / 330L tion (without Freon) 5~10 Person TPQ-Ø58×1800×25/48°or38° 285L / 385L 7~12 PersonRobust SeriesEspecially for common household,this model is produced with robustquality and taken strict inspectionbefore going on market. Sufficient Series Especially for high volume hot water consumption. Model/ Diameter/ Length / Water Tank Capacity / Major Modules Suitable Family Number/ Angle Total Capacity Water Tank Vacuum Tube Bracket Size TP-Ø70×2008×20-48° 245L / 340L Inner tank SUS304 stainless steel, Polyurethane insula- Ø70 vacuum tube, Blue galvanized 5~10 Person TP-Ø70×2008×30-48° 365L / 510L tion (without Freon), Outer tank:0.4mm color plate borosilicate 3.3 glass Plate support 7~15 Person
24/25 TP Solar Water Heaters SystemsNon-pressureSeries Plum Blossom Series +15% Upgrade with Plum Blossom Tubes 15% higher performance result from vacuum tube innovation Adopting Plum Blossom Tubes, we obtain 15% enhancement in absorber area and corre- sponding higher heat performance the same installation area and the same product size.Model/ Diameter/ Length / Water Tank Capacity / Major Modules Suitable Family Number/ Angle Total Capacity Water Tank Vacuum Tube Bracket Size TPMS Ø58x1800x20 165L/205L Inner tank SUS304 stainless steel, polyurethane Plum blossom tubes, Black galvanized Alu- 4~6 Person TPMS Ø58x1800x30 195L/250L insulation (without Freon) borosilicate 3.3 glass minums alloy support 6~8 Person
TP Solar WaterHeaters SystemsPressurized Split SeriesPremium series- brings you luxury experience Refined Vacuum Tube Patent Water Tank • High quality glass-unique properties • TP patent water tank technology pro- give good transmissibility with low vide with a down-streamed air exhaust reflection losses and long duration. to save heat loss by 15%. • Advanced automation production line • The air inside water tank won’t come provides with superior coating quality, out until the water tank is full. The which make coating absorptivity ≥94%, special down-streamed structure pre- and emissivity ≤6%. vents heat loss through air exhausting day and night. Pressurized U pipe Collector • Especially suitable for cold weather, Intelligent control system U pipe collectors provide heat even in • The water level and temperature can cold, windy or humid conditions. be intelligently controlled by a control- ler. • Giving you an luxury feeling, U pipe collector can be hang on balcony in an aesthetic way, which is h from water tank.
26/27 TP Solar Water Heaters SystemsPressurized SplitSeriesBalcony Series Name/Diameter/ Capacity Major Modules SuitableEpecially designed +15% Length/ Amount Volume Water Tank Collector Family Sizefor multi-stories 95L pressurized water tank, pressurized water tankbuilding. TPYZ-Ø58x1800mmx12 95L U pipe Collector with Blossom Ø58x18x12 U-shaped 2~4 Person Tube, working pressure:8bar collectorx3 115L pressure water tank, U pressurized water tank TPYZ-Ø58x1800mmx22 115L pipe Collector with Blossom Ø58x18x11 U-shaped 3~5 Person Tube, working pressure:8bar collectorx2Regular Pressurized Name/Diameter/ Capacity Major Modules SuitableSplit Series Length/ Amount Volume Water Tank Collector Family Size 200L pressurized water tank, Ø58x18x12 U-shaped TPF-Ø58x1800mmx24 200L 4~7 Person working pressure:8bar collectorx2 300L pressurized water tank, Ø58x18x12 U-shaped TPF-Ø58x1800mmx36 300L 6~12 Person working pressure:8bar collectorx3
28/29Easylife is a perfect system solution aiming at solar thermal projects of 1 – 10ton for hot water and space heating in villas, hotels, fitness clubs, schoolsand other kinds of small projects.Rapid Assembling Customized SystemSimplified Design, Modular Structure Economic Hot Water, Potable Hot Water, Combi-system of Potable Hot Water &Easy Installation Space HeatingStandardized System, Original Factory Parts Higher System EfficiencyFlexible Accumulation Advanced Evacuated Tubes, Patent Tech-1~10 ton Capacity nology of Down-stream Air ExhaustingStable System Storage TankOriginal Factory Parts
Easylife HW/Easylife PHW Easylife HW&SHType Model ELIFE-0.5T ELIFE-1.0T ELIFE-CN-1.0T Water Tank Capacity 500L 1000L 1000L Collector Type Ø58x1600x60 Ø47x1600x70 Ø58x1600x60 Parameter No. of Collectors 1 2 6 Collector Area 6.8m 2 13.62m 2 40.8m2 Installation Area (WxLxH) (mm3) 3300*3400*2050 6800*3400*2050 6800*8400*2050 Large-scale manifold √ √ √ Anti-corrossive Bracket × √ √ Anti-foulding Water Tank × √ √ Pressurized × √ √ Function and Potable Hot Water √ √ √ Configuration High-efficiency Heat Exchanger × √ √ Large-scale Array × × √ Standard SS Circulation Pipe √ √ √ Anti-dry Electronic Heat ∆ √ √ Full-automatic Smart Controller ∆ ∆ √ Providing 24-hour potable Providing potable hot water and Providing hot water for small hot water for residential space heating for residential hostels, hotels, training centers, Target Users buildings, villas,hotels, chain buldings, villas, small-scale office fitness clubs, hopsitals,schools, restaurants,beauty salons, small spaces, inspection stations, labs, workshops, etc. and medium-scale companies, etc. etc.Note1. √ stands for standard configurations, ∆ stands for optional items, × stands for unavailable items.2. In the event of any discrepancy between information given above and real products, the real productsshall prevail. The above information is subject to change without prior notice.
30/31 Project System Revolution – Easylife High-efficiency Heat ExchangerEasylife HW Easylife PHWApplication: Hot Water Application: Potable Hot WaterWater Tank Capacity: 500L Water Tank Capacity: 1000LCollector Gross Area: 6.8m 2 Collector Gross Area: 13.62m2Installation Area(mm ): 3300*3400*2050 (W*L*H) 3 Installation Area(mm3): 6800*3400*2050(W*L*H)Number of Users: 8 – 12 Number of Users: 20 – 25Easylife™ HW & SH Integrated Easylife ArrayApplication: Potable Hot Water and Space Heating Application: 24 Hours Hot Water SupplyWater Tank Capacity: 1000L Total Water Tank Capacity: 1000 – 10,000LCollector Gross Area: 40.8m 2 Total Collector Gross Area: 13.6 – 136m2Installation Area(mm3): 6800*8400*2050(W*L*H) Installation Area: 23 – 230m3Number of Users: 30 – 40 Number of Users: 20 – 200
TP Solar ThermalSolutionsTP started providing solutions in global scale for solar thermal projectsin 1996 , proud of its first professional solar energy engineering team inChina, with total installation area of 2 million square meter, our customizedsolutions has delivered to more than 20,000 customers. We specialized incustomizing solar thermal and hot water solutions for a wide field involvingdomestic, agricultural and industrial demand.Our Honored Customers
32/33 TP Solar Thermal SolutionsThe Biggest SolarIndustrial ProcessHeating ProjectWorldwide Zhejiang Fabric Dying Co., Ltd Solar hot water project for industrial proc- ess heating • Application: hot water for large-scale industrial usage and additional heat recycling • Installation Area:50,000m2 • Save 10,289 tons of standard coal and corresponding discharge
TP Solar ThermalSolutionsReliable Partner of Olympic Games Beijing Olympic Volunteers Resident Project Hot water supply for concentrated application • Application: 24 hours concentrated hot water supply for 3600 bath, 482 showers in total. • Products: 765 PCS of Ø58x18x12 Direct Flow Collectors, 200t assembled water tank • Supplementary Heat Source: Electronic heating
34/35 TP Solar Thermal SolutionsIntegrated Systemof Solar PV andSolar ThermalHainan HSBC Project• Application: Hot water supply for com- mercial application• Installation Area: 432m2• Supplementary Heat Source: Air-source heat pump+Electric boiler
TP Solar ThermalSolutionsSolar Thermal Sys-tem for ResidentialApplicationSplit installation for Middle & Upper The World’s Biggest Solar District Domestic Hot Water for VillaLayers Buildings Heating ProjectHainan Chunguang Villa Shanxi P.R.C. Hot Water Project Hainan Sanya VillaSolar Combi-system For Commercial Application Domestic hot water supply Domestic hot water supply for villa• Application: Hot water supply for residential application • Project Type: Low-rise apartment • Project Type: Villa residential district heating• Installation Area: 345m² • Products:200L/set • Application: 24 hours hot water supply, central hot water with household metering• Daily Output: 27t • Installation Area: 2m2 /set, 21600 sets in total • Installation Area: 2~4m²/household • Supplementary Heat Source: Electronic heating
36/37 TP Solar Thermal SolutionsSolar System forAgricultural Appli-cationSolar System for Vegetable Green- Solar System for Fresh Water Aqua- Malaysia Slaughterhousehouse cultureBeijing Academy of Agricultural Science Planting Shanghai Fresh-water Aquiculture Department • Application: Hot water supply for 50,000 ChickenBase Water heating for agricultural application SlaughterSpace heating for Agricultural application Demonstrating Base of TP with Yufa Town, Beijing Daxing • Installation Area: 260m2Demonstrating Base of TP with Yufa Town, Beijing Daxing DistrictDistrict • Every day save 1.2 tons of diesel fuel and correspond- • Application: Warm water aquiculture ing discharge• Application: Control the temperature of greenhouse • Supplementary Heat Source: Coal boiler through solar system
Low-carbon Solutionsfor Buildings and CommunitiesLow-carbon Industry ZoneIndustry Zone of Hubei Manufacturing and Engineer-ing Base, TP Solar Group• Total Floor Area: 53,380m2• System Components: PV system, solar thermal collec- tors, geothermal-source heat pump
38/39 provides integrated low carbon building solutions through profes-sional service of “Green Building” consulting, customization, design, integra-tion, training and maintenance. Solutions are tailored with customers’ spe-cific needs, considering local situation, resources, and the building features.Demonstration Sweet Rose ResortBuilding on Re- Fang Mountain, Daxing District,newable Energy Beijing • Service: Solutions on low-carbonTP Solar Head Quarter in Beijing buildings• Service: Solutions on low-carbon buildings • System Components: 20kw PV system, solar thermal collector in area• System Components: 50kw PV system, of 1100 m2, water-source heat pump, solar thermalcollector in area of 500 biomass energy. m2, geothermal-source heat pump.
40Our Services Consulting Equipment Integration Green building design Renewable energy system consulting Renewable energy equipment Energy consumption analysis Energy-saving equipment Customization Training Green building solutions Trainings on low-carbon knowledge Renewable energy system solutions Trainings on renewable energy system operation Energy-saving technology System Design Maintenance Green building design After-sales service Renewable energy system design Regular inspection Integration of renewable energy and green building