1. Dr C.Bhasker
TML, BHEL R&D Division,
Vikasnagar, Hyderabad-500 093 (India)
Ph :011-91-40-55841584; ph: 011-91-40-27641584:
Fax:011-91-40-23778320; cell: 98492 52948
Email:bskr2k@yahoo.com; Email:bskr55@yahoo.co.in
URL: www.geocities.com/bskr2k
Objectives Looking for Team Leader in Aero-Structural Engineering design through CAD/CFD/Ansys
for given opportunity
Expertise CFD – Industrial Applications (Stationary and rotating components)
Computational structured, unstructured and polyhedral grids.
Incompressible flow simulation with higher order turbulence modeling.
Multiphase flow simulation to estimate erosion and emission levels.
Software CFX-TASCflow, Ansys CFX-5.6, Gambit-Fluent, Adapco Star-CD, Tecplot, Ansys,
Expertise Hypermesh, Field-view
Software Codes For implementation and extension of Source Codes written in Fortran – Allspeed3D,
CLEW-2D, PUMP (design) on Windows based intel systems.
Education B.Sc Osmania University, Hyderabad, India 1977
M.Sc Osmania University, Hyderabad, India 1979
Ph.D Osmania University, Hyderabad, India 1990
Thesis: Fluid Flow and Heat Transfer Characteristics of Two Phase (Gas Particle Flows)
through Rotating Systems, Osmania University, Hyderabad. India (Abstracted in
Dissertation International, UMI/Michigan, USA.
Certificate: CFD Advances and Applications, National Aerospace Laboratories,
Bangalore, India 1994
Certificate: CFX Softwares at AEA Technologies, waterloo, Ontario, Canada, 1997
Certificate: Fluent pre and Post processor, Fluent India, Pune, India, 2000
Experience Scientific Assistant, BHEL R&D, Division, Hyderabad, India 1984-90
Junior Executive, BHEL R&D Division, Hyderabad, India, 1991-1992
Scientific Officer, BHEL R&D, Division, Hyderabad, India, 1992-1996
Sr Scientific Officer, BHEL R&D Division, Hyderabad, India, 1996-1999
Research Scientist, ERC, Mississippi State University, USA 2000-2001
Sr Scientific Officer, BHEL R&D Division, Hyderabad, India, 2001-2002
Dy Manager, BHEL R&D Division, Hyderabad, India 2002-2006
Manager, BHEL R&D Division, Hyderabad, India June-2006 till date
Present Project Leader: Investigations for Steam Turbine Bypass Valve Erosion using CFD.
Research Project Team Member: CFD analysis of Quick Closed Non-Return Valves.
Optimisation and design improvements through moving grids through CFD techniques.
Memberships Member, AIAA/USA from 2000 to till date
Life Time Member, Engineering Design and Analysis Forum, Bangalore from 2006
Council Member, Computer Society of India, Hyderabad chapter 1991-93
Projects Project Leader: Analysis of Dust-laden gases across in line tubes 1996-1997
Project Leader: Flow analysis of in Bowl Mill 1998-2000
Project Leader: Flow Simulation in 60MW KTPS ESP, 2004-2005
Customer Problem: Flow Distribution in Air Plenuum Nozzles duct used in CFBC boiler
2000 for Surat Lignite Power Corporation, Baroda, India.
Customer Problem: Two Phase flow analysis in recycle Cyclone Collector used in CFBC
power plant at Sinarmas (Pulp and paper India Ltd), Pune, India 2003
1997 Team Member: Compressible Flow analysis in 3.5 sq m Steam Turbine exhaust hood,
2000 Team Member: Flow analysis in Hydraulic Francis Turbine of 45 m head Draft tube.
2002 Team Member: Flow analysis in Hydraulic Kaplan Turbine of 30 m head Draft tube,
2002 Team Member: Profile generation for 8MW Steam turbine Blades using Bazier knots.

2. Achievement of Experience in generation of body fitted coordinate grid and two phase flow
Research simulation past the inline and staggered tube bank.
Extraction of CAD surfaces from the solid model of Bowl Mill and geometry block
decomposition. Generation of hexahedral multi-block grid, setting up of two-phase
flow simulation with rotational effects for some part of computational domain.
Recommendations for improvement of component at site.
Analysis of customer problem of recycle cyclone collector through different
baffle plates arrangements through two-phase flow simulations and provided the
recommendations to correct ash deposition problem on super-heater tube banks.
Flow simulation in complicated air inlet duct whose exit is through multiple
circular nozzles to trouble shoot ash backshifting in the application of Circulating
fluidized bed boiler.
Complicated grid generation for draft tube attached to 45 mt head Francis
Turbine. Analysis of water flow for different swirl angles. Estimation of pressure
drop and recovery factor values close to design documents.
Compressible flow analysis for 3.2 sq m steam turbine exhaust hood through CFX-
TASCflow.
Professional Research Guide to B.Tech/M.Tech/M.Sc/Ph.D students in the development of
Experience application software for several research problems.
Reviewer of several technical papers for scientific journals/national international
conference proceedings.
One Semester faculty for Post-graduate course in Mathematics at
JNTUniversity, Hyderabad, India
Published over forty technical papers in several national international journals and
referred conference proceedings.
Group Development Instrumental in coordination, procurement, monitoring in creation of modern
lecture halls with state of art electronic equipment in Human Resource
Development Centre 1987
Supportive Assistance in creation of CFD laboratory Dec Alpha Unix work-station
with pc clients with the system-Administrative responsibilities 1991-2000
Supportive Assistance in Creation Excellence Centre for CFD with the capital
costs of Rs. 8.5 crores involving high performance computing systems with several
pc clients and high value license based commercial softwares 2004-2005.
As a Chapter council member of computer Society of India, instrumental in
organization of several national and international events on latest topics in
computer science.
Research Research guidance for undergraduate students persuing CFD in low nox swirl
Guidance burner and Complex ducts using meshing software Hypermesh and flow solvers
Fluent/Star-CD/Ansys-CFX.
Recognition Who is Who in Science and Engineering, 7th Edition of Marquis who and who,
2003-2004 page 112.
Misc Creation of Training data base of employees for Human Resource Development
center in BHEL at Corporate R&D Division.
Project guidance - Comprehensive Study of performance appraisal system in
BHEL
References Dr Haribabu Vuthalure, Dept of Chemical Engineering, Curtin Institute of
Technology, Perth, Western Australia.
Dr S Kishore, Gas Turbine Research Institutue, Bangalore.
Dr Sekhar Muzamdar, National Aerospace Laboratory, Bangalore.