Making Of Portable Welding Screens
Welding Work
It is common knowledge that welding work is prone to cause physical injuries and
eyesight problems due to sparks and excessive heat and a welder has to necessarily
invest in safety gadgets to keep not only himself but also others around him safe.
Whatever may be your risk-taking capabilities, if you are welding near other people
and amidst any valuables, it will be sheer callousness if you do not have a not to
have a portable welding screen in place.
Types of Welding Work
All types of welding work including
 arc welding,
 torch welding,
 cutting and brazing, or
 soldering
produce quantities of ultraviolet radiation. UV radiation is extremely harmful as it can
burn the skin, and more than that, damage the lens of the eye. Flash burns are
terribly painful and can cause incalculable damage.
Welders, workers, and visitors, near the welding area must be protected from the
hazards of ultraviolet rays. One effective way to achieve this is by placing flameproof
screens around the welding operation. Welding screens are used to protect others in
the vicinity of the welding operation, when the body of the welder or the shape of
the steel cannot shield the arc.
Portable Welding Screens

One welding accessory that is of paramount importance is the portable welding
screen. Portable Weld Screens offer excellent protection against harmful levels of
UV light, as well as sparks and flying debris. They are the foolproof solution to help
manage your entire welding activity.
Most welders have metal frames for their portable welding screen. Making a portable
welding screen is quite simple. First of all, determine the size of the actual welding
screen. Then measure and cut the metal to make a rectangle that is marginally
larger than the metal welding frame. Then cut 2 pieces for the outrigger legs that
support the stand for the welding screen. Place the rectangle in proper position and
weld. There are some portable welding screens that have four large ball bearings
welded to facilitate easy sliding on the shop floor.
Some opt for very small casters attached to allow for easy movement. But without
these add-ons, portable welding screen will be very light and easy to carry around.
After completing the welding work, get some zip ties and fasten the welding screen
to the frame. It may take, at best, one hour to make a portable welding screen from
start to finish. But it is worth the time and money you spend. While designing the
portable welding screen it is better to have a see-through welding screen to avoid
walking out in front of a forklift or overhead crane carrying a load.
With welding screens and curtains readily available in all types, sizes and colors
there is little justification not to make a Welding screen and use it while doing
welding work. Portable Safety Screens can be made light, durable and easy to handle
and are a indispensble safety gadget for nearly any welding environment. The Screen
can be used alone or joined together with clips to form multi-panel enclosures or
straight line barriers.

Welding and cutting can be safe operations, if the welder has the prescribed safety
accessories. Apart from protecting himself, the welders have a responsibility to
protect people working in the vicinity. Without the safety gadgets and proper
precautions, welding could become a hazardous job threatening the safety of not
only the welder but all people around.
SOURCE:
http://www.everlastgenerators.com